From: Peng Yuan <yuan.peng@intel.com>
To: dts@dpdk.org
Cc: Peng Yuan <yuan.peng@intel.com>
Subject: [dts] [PATCH] test_plans: add a test case to test plan
Date: Wed, 26 Jun 2019 17:40:28 +0800 [thread overview]
Message-ID: <1561542028-73093-1-git-send-email-yuan.peng@intel.com> (raw)
Add a test case to vlan_test_plan.rst
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/test_plans/vlan_test_plan.rst b/test_plans/vlan_test_plan.rst
index 54df0b6..a5058f8 100644
--- a/test_plans/vlan_test_plan.rst
+++ b/test_plans/vlan_test_plan.rst
@@ -76,7 +76,38 @@ The -n command is used to select the number of memory channels. It should match
Set the verbose level to 1 to display information for each received packet::
testpmd> set verbose 1
+ testpmd> vlan set filter on
+Test Case: Enable receipt of VLAN packets and disable VLAN header stripping
+===========================================================================
+
+Setup the ``mac`` forwarding mode::
+
+ testpmd> set fwd mac
+ Set mac packet forwarding mode
+
+Enable the receipt of VLAN packets with VLAN Tag Identifier 1 on port 0::
+
+ testpmd> rx_vlan add 1 0
+ testpmd> vlan set strip off 0
+ testpmd> start
+ rxonly packet forwarding - CRC stripping disabled - packets/burst=32
+ nb forwarding cores=1 - nb forwarding ports=10
+ RX queues=1 - RX desc=128 - RX free threshold=64
+ RX threshold registers: pthresh=8 hthresh=8 wthresh=4
+ TX queues=1 - TX desc=512 - TX free threshold=0
+ TX threshold registers: pthresh=32 hthresh=8 wthresh=8
+
+Configure the traffic generator to send VLAN packets with the Tag Identifier
+ ``1`` and send 1 packet on port ``A``.
+
+Verify that the VLAN packet was correctly received on port ``B`` with VLAN tag ``1``.
+
+Configure the traffic generator to send VLAN packets with not matched Tag
+Identifier and send 1 packet on port ``A``.
+
+Verify that the VLAN packet was not correctly received on port ``B`` with
+this not matched VLAN Tag.
Test Case: Enable receipt of VLAN packets and VLAN header stripping
===================================================================
@@ -89,6 +120,7 @@ Setup the ``mac`` forwarding mode::
Enable the receipt of VLAN packets with VLAN Tag Identifier 1 on port 0::
testpmd> rx_vlan add 1 0
+ testpmd> vlan set strip on 0
testpmd> start
rxonly packet forwarding - CRC stripping disabled - packets/burst=32
nb forwarding cores=1 - nb forwarding ports=10
@@ -100,8 +132,7 @@ Enable the receipt of VLAN packets with VLAN Tag Identifier 1 on port 0::
Configure the traffic generator to send VLAN packets with the Tag Identifier
``1`` and send 1 packet on port ``A``.
-Verify that the VLAN packet was correctly received on port ``B`` with VLAN tag ``1``.
-
+Verify that the VLAN packet was correctly received on port ``B`` without VLAN tag ``1``.
Test Case: Disable receipt of VLAN packets
==========================================
--
2.14.3
next reply other threads:[~2019-06-26 9:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 9:40 Peng Yuan [this message]
2019-07-10 6:32 ` Tu, Lijuan
-- strict thread matches above, loose matches on Subject: below --
2019-06-26 9:35 zhuwenhui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1561542028-73093-1-git-send-email-yuan.peng@intel.com \
--to=yuan.peng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).