test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH V2] tests: add testsuite dpdk gro lib
@ 2019-08-12 21:34 lihong
  2019-08-13  6:40 ` Wang, Yinan
  0 siblings, 1 reply; 2+ messages in thread
From: lihong @ 2019-08-12 21:34 UTC (permalink / raw)
  To: dts; +Cc: yinan.wang, lihong

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 tests/TestSuite_dpdk_gro_lib.py | 405 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 405 insertions(+)
 create mode 100644 tests/TestSuite_dpdk_gro_lib.py

diff --git a/tests/TestSuite_dpdk_gro_lib.py b/tests/TestSuite_dpdk_gro_lib.py
new file mode 100644
index 0000000..b857651
--- /dev/null
+++ b/tests/TestSuite_dpdk_gro_lib.py
@@ -0,0 +1,405 @@
+# BSD LICENSE
+#
+# Copyright(c) <2019> Intel Corporation.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+#   * Neither the name of Intel Corporation nor the names of its
+#     contributors may be used to endorse or promote products derived
+#     from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+
+dpdk gro lib test suite.
+In this suite, in order to check the performance of gso lib, will use one
+hostcpu to start qemu and only have one vcpu
+"""
+import re
+import time
+import utils
+from test_case import TestCase
+from virt_common import VM
+import vhost_peer_conf as peer
+
+
+class TestDPDKGROLib(TestCase):
+
+    def set_up_all(self):
+        # This suite will not use the port config in ports.cfg
+        # it will use the port config in vhost_peer_conf.cfg
+        # And it need two interface reconnet in DUT
+
+        # unbind the port which config in ports.cfg
+        self.dut_ports = self.dut.get_ports()
+        for i in self.dut_ports:
+            port = self.dut.ports_info[i]['port']
+            port.bind_driver()
+
+        # get and bind the port in config file
+        self.pci = peer.get_pci_info()
+        self.pci_drv = peer.get_pci_driver_info()
+        self.peer_pci = peer.get_pci_peer_info()
+        self.nic_in_kernel = peer.get_pci_peer_intf_info()
+        self.verify(len(self.pci) != 0 and len(self.pci_drv) != 0
+                    and len(self.peer_pci) != 0
+                    and len(self.nic_in_kernel) != 0,
+                    'Pls config the direct connection info in vhost_peer_conf.cfg')
+        self.dut.send_expect(
+            "./usertools/dpdk-devbind.py -b igb_uio %s" %
+            self.pci, '#', 30)
+
+        # get the numa info about the pci info which config in peer cfg
+        bus = int(self.pci[5:7], base=16)
+        if bus >= 128:
+            self.socket = 1
+        else:
+            self.socket = 0
+        # get core list on this socket, 2 cores for testpmd, 1 core for qemu
+        cores_config = '1S/3C/1T'
+        self.verify(self.dut.number_of_cores >= 3,
+                "There has not enought cores to test this case %s" % self.suite_name)
+        cores_list = self.dut.get_core_list("1S/3C/1T", socket=self.socket)
+        vhost_list = cores_list[0:2]
+        self.qemu_cpupin = cores_list[2:3][0]
+        self.core_mask_vhost = utils.create_mask(vhost_list)
+
+        # Set the params for VM
+        self.virtio_ip1 = "1.1.1.2"
+        self.virtio_mac1 = "52:54:00:00:00:01"
+        self.memory_channel = self.dut.get_memory_channels()
+        if len(set([int(core['socket']) for core in self.dut.cores])) == 1:
+            self.socket_mem = '1024'
+        else:
+            self.socket_mem = '1024,1024'
+        self.prepare_dpdk()
+
+    def set_up(self):
+        #
+        # Run before each test case.
+        #
+        # Clean the execution ENV
+        self.dut.send_expect("rm -rf ./vhost-net*", "#")
+        self.dut.send_expect("killall -s INT testpmd", "#")
+        self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+    def launch_testpmd_gro_on(self, mode=1):
+        #
+        # Launch the vhost sample with different parameters
+        # mode 1 : tcp traffic light mode
+        # mode 2 : tcp traffic heavy mode
+        # mode 3 : vxlan traffic light mode
+        # mode 4 : tcp traffic flush 4
+        self.testcmd = self.target + "/app/testpmd -c %s -n %d --socket-mem %s --legacy-mem" \
+            + " --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i  --enable-hw-vlan-strip --tx-offloads=0x00" \
+                + " --txd=1024 --rxd=1024"
+        self.testcmd_start = self.testcmd % (
+            self.core_mask_vhost, self.memory_channel, self.socket_mem)
+        self.vhost_user = self.dut.new_session(suite="user")
+        self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
+        self.vhost_user.send_expect("set fwd csum", "testpmd> ", 120)
+        self.vhost_user.send_expect("stop", "testpmd> ", 120)
+        self.vhost_user.send_expect("port stop 0", "testpmd> ", 120)
+        self.vhost_user.send_expect("port stop 1", "testpmd> ", 120)
+        self.vhost_user.send_expect("csum set tcp hw 0", "testpmd> ", 120)
+        self.vhost_user.send_expect("csum set ip hw 0", "testpmd> ", 120)
+        self.vhost_user.send_expect("csum set tcp hw 1", "testpmd> ", 120)
+        self.vhost_user.send_expect("csum set ip hw 1", "testpmd> ", 120)
+        if(mode == 1):
+            self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
+            self.vhost_user.send_expect("set gro flush 1", "testpmd> ", 120)
+        if(mode == 2):
+            self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
+            self.vhost_user.send_expect("set gro flush 2", "testpmd> ", 120)
+        if (mode == 3):
+            self.vhost_user.send_expect("csum parse-tunnel on 1", "testpmd> ", 120)
+            self.vhost_user.send_expect("csum parse-tunnel on 0", "testpmd> ", 120)
+            self.vhost_user.send_expect("csum set outer-ip hw 0", "testpmd> ", 120)
+            self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
+            self.vhost_user.send_expect("set gro flush 2", "testpmd> ", 120)
+        else:
+            self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
+            self.vhost_user.send_expect("set gro flush 4", "testpmd> ", 120)
+        self.vhost_user.send_expect("port start 0", "testpmd> ", 120)
+        self.vhost_user.send_expect("port start 1", "testpmd> ", 120)
+        self.vhost_user.send_expect("start", "testpmd> ", 120)
+
+    def set_testpmd_gro_off(self):
+        #
+        # Launch the vhost sample with different parameters
+        #
+        self.vhost_user.send_expect("stop", "testpmd> ", 120)
+        self.vhost_user.send_expect("set port 0 gro off", "testpmd> ", 120)
+        self.vhost_user.send_expect("start", "testpmd> ", 120)
+
+    def quit_testpmd(self):
+        # Quit testpmd and close temp ssh session
+        self.vhost_user.send_expect("quit", "#", 120)
+        self.dut.close_session(self.vhost_user)
+
+    def config_kernel_nic_host(self, mode=1):
+        if (mode == 0):
+            self.dut.send_expect("ip netns del ns1", "#")
+            self.dut.send_expect("ip netns add ns1", "#")
+            self.dut.send_expect(
+                "ip link set %s netns ns1" %
+                self.nic_in_kernel, "#")
+            self.dut.send_expect(
+                "ip netns exec ns1 ifconfig %s 1.1.1.8 up" %
+                self.nic_in_kernel, "#")
+            self.dut.send_expect(
+                "ip netns exec ns1 ethtool -K %s tso on" %
+                self.nic_in_kernel, "#")
+        if (mode == 1):
+            self.dut.send_expect("ip netns del ns1", "#")
+            self.dut.send_expect("ip netns add ns1", "#")
+            self.dut.send_expect(
+                "ip link set %s netns ns1" %
+                self.nic_in_kernel, "#")
+            self.dut.send_expect(
+                "ip netns exec ns1 ifconfig %s 1.1.2.4/24 up" %
+                self.nic_in_kernel, "#")
+            self.dut.send_expect(
+                "ip netns exec ns1 ip link add vxlan1 type vxlan id 42 dev %s dstport 4789" %
+                self.nic_in_kernel, "#")
+            self.dut.send_expect(
+                "ip netns exec ns1 bridge fdb append to 00:00:00:00:00:00 dst 1.1.2.3 dev vxlan1", "#")
+            self.dut.send_expect(
+                "ip netns exec ns1 ip addr add 50.1.1.1/24 dev vxlan1", "#")
+            self.dut.send_expect(
+                "ip netns exec ns1 ip link set up dev vxlan1", "#")
+
+    def prepare_dpdk(self):
+        #
+        # Changhe the testpmd checksum fwd code for mac change
+        self.dut.send_expect(
+            "cp ./app/test-pmd/csumonly.c ./app/test-pmd/csumonly_backup.c",
+            "#")
+        self.dut.send_expect(
+            "cp ./drivers/net/vhost/rte_eth_vhost.c ./drivers/net/vhost/rte_eth_vhost-backup.c",
+            "#")
+        self.dut.send_expect(
+            "sed -i '/ether_addr_copy(&peer_eth/i\#if 0' ./app/test-pmd/csumonly.c", "#")
+        self.dut.send_expect(
+            "sed -i '/parse_ethernet(eth_hdr, &info/i\#endif' ./app/test-pmd/csumonly.c", "#")
+        # change offload of vhost
+        tx_offload = 'DEV_TX_OFFLOAD_VLAN_INSERT | ' + \
+                    'DEV_TX_OFFLOAD_UDP_CKSUM | ' + \
+                    'DEV_TX_OFFLOAD_TCP_CKSUM | ' + \
+                    'DEV_TX_OFFLOAD_IPV4_CKSUM | ' + \
+                    'DEV_TX_OFFLOAD_TCP_TSO;'
+        rx_offload = 'DEV_RX_OFFLOAD_VLAN_STRIP | ' + \
+                    'DEV_RX_OFFLOAD_TCP_CKSUM | ' + \
+                    'DEV_RX_OFFLOAD_UDP_CKSUM | ' + \
+                    'DEV_RX_OFFLOAD_IPV4_CKSUM | ' + \
+                    'DEV_RX_OFFLOAD_TCP_LRO;'
+        self.dut.send_expect(
+            "sed -i 's/DEV_TX_OFFLOAD_VLAN_INSERT;/%s/' drivers/net/vhost/rte_eth_vhost.c" % tx_offload, "#")
+        self.dut.send_expect(
+            "sed -i 's/DEV_RX_OFFLOAD_VLAN_STRIP;/%s/' drivers/net/vhost/rte_eth_vhost.c" % rx_offload, "#")
+        self.dut.build_install_dpdk(self.dut.target)
+
+    def unprepare_dpdk(self):
+        # Recovery the DPDK code to original
+        self.dut.send_expect(
+            "cp ./app/test-pmd/csumonly_backup.c ./app/test-pmd/csumonly.c ",
+            "#")
+        self.dut.send_expect(
+            "cp ./drivers/net/vhost/rte_eth_vhost-backup.c ./drivers/net/vhost/rte_eth_vhost.c ",
+            "#")
+        self.dut.send_expect("rm -rf ./app/test-pmd/csumonly_backup.c", "#")
+        self.dut.send_expect("rm -rf ./drivers/net/vhost/rte_eth_vhost-backup.c", "#")
+        self.dut.build_install_dpdk(self.dut.target)
+
+    def set_vm_cpu_number(self, vm_config):
+        # config the vcpu numbers = 1
+        # config the cpupin only have one core
+        params_number = len(vm_config.params)
+        for i in range(params_number):
+            if vm_config.params[i].keys()[0] == 'cpu':
+                vm_config.params[i]['cpu'][0]['number'] = 1
+                vm_config.params[i]['cpu'][0]['cpupin'] = self.qemu_cpupin
+
+    def start_vm(self):
+        self.vm1 = VM(self.dut, 'vm0', 'vhost_sample')
+        self.vm1.load_config()
+        vm_params_1 = {}
+        vm_params_1['driver'] = 'vhost-user'
+        vm_params_1['opt_path'] = './vhost-net'
+        vm_params_1['opt_mac'] = self.virtio_mac1
+        vm_params_1[
+            'opt_settings'] = 'mrg_rxbuf=on,csum=off,gso=off,host_tso4=on,guest_tso4=on'
+        self.vm1.set_vm_device(**vm_params_1)
+        self.set_vm_cpu_number(self.vm1)
+        try:
+            self.vm1_dut = self.vm1.start(load_config=False)
+            if self.vm1_dut is None:
+                raise Exception("Set up VM ENV failed")
+        except Exception as e:
+            print utils.RED("Failure for %s" % str(e))
+        self.vm1_dut.restore_interfaces()
+
+    def iperf_result_verify(self, run_info):
+        '''
+        Get the iperf test result
+        '''
+        fmsg = self.dut.send_expect("cat /root/iperf_client.log", "#")
+        print fmsg
+        iperfdata = re.compile('[\d+]*.[\d+]* [M|G|K]bits/sec').findall(fmsg)
+        print iperfdata
+        self.verify(iperfdata, 'There no data about this case')
+        self.result_table_create(['Data', 'Unit'])
+        results_row = [run_info]
+        results_row.append(iperfdata[-1])
+        self.result_table_add(results_row)
+        self.result_table_print()
+        self.output_result = "Iperf throughput is %s" % iperfdata[-1]
+        self.logger.info(self.output_result)
+
+    def test_vhost_gro_tcp_lightmode(self):
+        self.config_kernel_nic_host(0)
+        self.launch_testpmd_gro_on()
+        self.start_vm()
+        time.sleep(5)
+        self.dut.get_session_output(timeout=2)
+        # Get the virtio-net device name
+        for port in self.vm1_dut.ports_info:
+            self.vm1_intf = port['intf']
+        # Start the Iperf test
+        self.vm1_dut.send_expect('ifconfig -a', '#', 30)
+        self.vm1_dut.send_expect(
+            'ifconfig %s %s' %
+            (self.vm1_intf, self.virtio_ip1), '#', 10)
+        self.vm1_dut.send_expect('ifconfig %s up' % self.vm1_intf, '#', 10)
+        self.vm1_dut.send_expect(
+            'ethtool -K %s gro off' % (self.vm1_intf), '#', 10)
+        self.vm1_dut.send_expect('iperf -s', '', 10)
+        self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+        self.dut.send_expect(
+            'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
+            (self.virtio_ip1), '', 180)
+        time.sleep(30)
+        self.iperf_result_verify('GRO lib')
+        print "the GRO lib %s " % (self.output_result)
+        self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+        # Turn off DPDK GRO lib and Kernel GRO off
+        self.set_testpmd_gro_off()
+        self.dut.send_expect(
+            'ip netns exec ns1 iperf -c %s -i 1 -t 10  -P 1 > /root/iperf_client.log &' %
+            (self.virtio_ip1), '', 180)
+        time.sleep(30)
+        self.iperf_result_verify('Kernel GRO')
+        print "the Kernel GRO %s " % (self.output_result)
+        self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+        self.quit_testpmd()
+        self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+    def test_vhost_gro_tcp_heavymode(self):
+        self.config_kernel_nic_host(0)
+        self.heavymode = 2
+        self.launch_testpmd_gro_on(self.heavymode)
+        self.start_vm()
+        time.sleep(5)
+        self.dut.get_session_output(timeout=2)
+        # Get the virtio-net device name
+        for port in self.vm1_dut.ports_info:
+            self.vm1_intf = port['intf']
+        # Start the Iperf test
+        self.vm1_dut.send_expect('ifconfig -a', '#', 30)
+        self.vm1_dut.send_expect(
+            'ifconfig %s %s' %
+            (self.vm1_intf, self.virtio_ip1), '#', 10)
+        self.vm1_dut.send_expect('ifconfig %s up' % self.vm1_intf, '#', 10)
+        self.vm1_dut.send_expect(
+            'ethtool -K %s gro off' %
+            (self.vm1_intf), '#', 10)
+        self.vm1_dut.send_expect('iperf -s', '', 10)
+        self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+        self.dut.send_expect(
+            'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
+            (self.virtio_ip1), '', 180)
+        time.sleep(30)
+        self.iperf_result_verify('GRO lib')
+        print "the GRO lib %s " % (self.output_result)
+        self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+        self.quit_testpmd()
+        self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+    def test_vhost_gro_tcp_heavymode_flush4(self):
+        self.config_kernel_nic_host(0)
+        self.heavymode = 4
+        self.launch_testpmd_gro_on(self.heavymode)
+        self.start_vm()
+        time.sleep(5)
+        self.dut.get_session_output(timeout=2)
+        # Get the virtio-net device name
+        for port in self.vm1_dut.ports_info:
+            self.vm1_intf = port['intf']
+        # Start the Iperf test
+        self.vm1_dut.send_expect('ifconfig -a', '#', 30)
+        self.vm1_dut.send_expect(
+            'ifconfig %s %s' %
+            (self.vm1_intf, self.virtio_ip1), '#', 10)
+        self.vm1_dut.send_expect('ifconfig %s up' % self.vm1_intf, '#', 10)
+        self.vm1_dut.send_expect(
+            'ethtool -K %s gro off' %
+            (self.vm1_intf), '#', 10)
+        self.vm1_dut.send_expect('iperf -s', '', 10)
+        self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+        self.dut.send_expect(
+            'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
+            (self.virtio_ip1), '', 180)
+        time.sleep(30)
+        self.iperf_result_verify('GRO lib')
+        print "the GRO lib %s " % (self.output_result)
+        self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+        self.quit_testpmd()
+        self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+    def tear_down(self):
+        """
+        Run after each test case.
+        """
+        self.dut.send_expect("killall -s INT testpmd", "#")
+        self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+        self.dut.send_expect("rm -rf ./vhost-net", "#")
+        time.sleep(2)
+        self.dut.send_expect("ip netns del ns1", "# ", 30)
+        self.dut.send_expect(
+            "./usertools/dpdk-devbind.py -u %s" % (self.peer_pci), '# ', 30)
+        self.dut.send_expect(
+            "./usertools/dpdk-devbind.py -b %s %s" %
+            (self.pci_drv, self.peer_pci), '# ', 30)
+
+    def tear_down_all(self):
+        """
+        Run after each test suite.
+        """
+        self.unprepare_dpdk()
+        self.dut.send_expect("ip netns del ns1", "# ", 30)
+        self.dut.send_expect(
+            "./usertools/dpdk-devbind.py -u %s" % (self.pci), '# ', 30)
+        self.dut.send_expect(
+            "./usertools/dpdk-devbind.py -b %s %s" %
+            (self.pci_drv, self.pci), '# ', 30)
-- 
2.7.4


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-08-13  6:40 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-12 21:34 [dts] [PATCH V2] tests: add testsuite dpdk gro lib lihong
2019-08-13  6:40 ` Wang, Yinan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).