test suite reviews and discussions
 help / color / Atom feed
* [dts] [PATCH V3] test_plans/interrupt:change queue for different nic
@ 2019-09-02  7:35 changqingxwu
  0 siblings, 0 replies; only message in thread
From: changqingxwu @ 2019-09-02  7:35 UTC (permalink / raw)
  To: dts; +Cc: changqingxwu

Beautify format, niantic net card not supports more than 15 queues, 
and need specify drivername is vfio-pci

Signed-off-by: changqingxwu <changqingx.wu@intel.com>
---
 test_plans/interrupt_pmd_test_plan.rst | 32 +++++++++++---------------
 1 file changed, 13 insertions(+), 19 deletions(-)

diff --git a/test_plans/interrupt_pmd_test_plan.rst b/test_plans/interrupt_pmd_test_plan.rst
index 8834e5f..0ffc818 100644
--- a/test_plans/interrupt_pmd_test_plan.rst
+++ b/test_plans/interrupt_pmd_test_plan.rst
@@ -55,7 +55,7 @@ Assume generated VF PCI address will be 0000:08:10.0, 0000:08:10.1.
 
 Iommu pass through feature has been enabled in kernel::
 
-   intel_iommu=on iommu=pt
+    intel_iommu=on iommu=pt
 
 Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and enable vt-d
 in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
@@ -65,45 +65,39 @@ Test Case1: PF interrupt pmd with different queue
 
 Run l3fwd-power with one queue per port::
 
-   l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+    l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
 
 Send one packet to Port0 and Port1, check that thread on core1 and core2
 waked up::
 
-
-   L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
-   L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
+    L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
+    L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
 
 Check the packet has been normally forwarded.
 
 After the packet forwarded, thread on core1 and core 2 will return to sleep::
 
-
-   L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
-   L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
+    L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
+    L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
 
 Send packet flows to Port0 and Port1, check that thread on core1 and core2 will
 keep up awake.
 
 Run l3fwd-power with random number queue per port, if is 4::
 
-        l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
-                        (0,2,2),(0,3,3),(0,4,4)"
+    l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
+       (0,2,2),(0,3,3),(0,4,4)"
 
 Send packet with increased dest IP to Port0, check that all threads waked up
 
 Send packet flows to Port0 and Port1, check that thread on core1 and core2 will
 keep up awake.
 
-Run l3fwd-power with 32 queues per port::
+Run l3fwd-power with 15 queues per port::
 
-        l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
-                        (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
-                        (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
-                        (0,15,15),\
-                        (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
-                        (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
-                        (1,13,29),(1,14,30),\(1,15,31)"
+    l3fwd-power -c 0xffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+        (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
+        (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)
 
 Send packet with increased dest IP to Port0, check that all threads waked up
 
@@ -115,7 +109,7 @@ Test Case2: PF lsc interrupt with vfio
 
 Run l3fwd-power with one queue per port::
 
-   l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+    l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
 
 Plug out Port0 cable, check that link down interrupt captured and handled by
 pmd driver.
-- 
2.17.2


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-02  7:35 [dts] [PATCH V3] test_plans/interrupt:change queue for different nic changqingxwu

test suite reviews and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dts/0 dts/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dts dts/ http://inbox.dpdk.org/dts \
		dts@dpdk.org
	public-inbox-index dts


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dts


AGPL code for this site: git clone https://public-inbox.org/ public-inbox