From: Lijuan Tu <lijuan.tu@intel.com>
To: dts@dpdk.org
Cc: Lijuan Tu <lijuan.tu@intel.com>
Subject: [dts] [PATCH] tests: add test script for example vmdq_dcb
Date: Sat, 15 Feb 2020 02:51:11 +0800 [thread overview]
Message-ID: <1581706271-163689-1-git-send-email-lijuan.tu@intel.com> (raw)
Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
---
tests/TestSuite_vmdq_dcb.py | 211 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 211 insertions(+)
create mode 100644 tests/TestSuite_vmdq_dcb.py
diff --git a/tests/TestSuite_vmdq_dcb.py b/tests/TestSuite_vmdq_dcb.py
new file mode 100644
index 0000000..8641c7c
--- /dev/null
+++ b/tests/TestSuite_vmdq_dcb.py
@@ -0,0 +1,211 @@
+# BSD LICENSE
+#
+# Copyright(c) 2020 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+
+Test example vmdq_dcb.
+
+"""
+import utils
+import os
+import re
+import random
+from test_case import TestCase
+from settings import HEADER_SIZE
+from pktgen import PacketGeneratorHelper
+
+
+class TestVmdqDcb(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.tester.extend_external_packet_generator(TestVmdqDcb, self)
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+ self.socket = self.dut.get_numa_id(self.dut_ports[0])
+ self.frame_size = 64
+ self.destmac_port = "52:54:00:12:00:00"
+
+ # get dts output path to place pcap files
+ if self.logger.log_path.startswith(os.sep):
+ self.output_path = self.logger.log_path
+ else:
+ cur_path = os.path.dirname(
+ os.path.dirname(os.path.realpath(__file__)))
+ self.output_path = os.sep.join([cur_path, self.logger.log_path])
+
+ # create an instance to set stream field setting
+ self.pktgen_helper = PacketGeneratorHelper()
+
+ self.prios = range(8)
+ self.create_pcaps(self.prios)
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ if self.running_case == "test_perf_16pools_8tcs":
+ self.rebuild_dpdk(8)
+ else:
+ self.rebuild_dpdk(4)
+ self.build_app()
+
+ def build_app(self):
+ """
+ Build example "Vmdq_dcb".
+ """
+ out = self.dut.send_expect("make -C examples/vmdq_dcb", "#", 10)
+ self.verify("Error" not in out, "Compilation error")
+
+ def rebuild_dpdk(self, nb_queue_per_vm=4):
+ """
+ Rebuild dpdk
+ """
+ self.dut.send_expect("sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=?/"
+ "CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=%s/' ./config/common_base" % nb_queue_per_vm, "#", 20)
+ self.dut.build_install_dpdk(self.target)
+
+ def start_application(self, npools, ntcs):
+ """
+ Prepare the commandline and start vmdq_dcb app
+ """
+ core_list = self.dut.get_core_list("1S/%dC/1T" % ntcs, socket=self.socket)
+ self.verify(core_list is not None, "Requested %d cores failed" % ntcs)
+ core_mask = utils.create_mask(core_list)
+ port_mask = utils.create_mask(self.dut_ports)
+ # Run the application
+ self.dut.send_expect("./examples/vmdq_dcb/build/vmdq_dcb_app -c %s -n 4 -- -p %s --nb-pools %s --nb-tcs %s "
+ "--enable-rss" % (core_mask, port_mask, str(npools), str(ntcs)), "reading queues", 120)
+
+ def create_pcaps(self, prios):
+ """
+ create traffic flows to pcap files
+ """
+ payload = self.frame_size - HEADER_SIZE['ip'] - HEADER_SIZE['eth']
+ for prio in prios:
+ self.tester.scapy_append(
+ 'flows = [Ether(dst="%s")/Dot1Q(vlan=0,prio=%d)/IP(src="1.2.3.4", dst="1.1.1.1")/("X"*%d)]'
+ % (self.destmac_port, prio, payload))
+ pcap = os.sep.join([self.output_path, "%s%d.pcap" % (self.suite_name, prio)])
+ self.tester.scapy_append('wrpcap("%s", flows)' % pcap)
+ self.tester.scapy_execute()
+
+ def get_tgen_input(self, prios):
+ tx_port = self.tester.get_local_port(self.dut_ports[0])
+ rx_port = self.tester.get_local_port(self.dut_ports[1])
+ tgen_input = []
+ for prio in prios:
+ pcap = os.sep.join([self.output_path, "%s%d.pcap" % (self.suite_name, prio)])
+ tgen_input.append((tx_port, rx_port, "%s" % pcap))
+ return tgen_input
+
+
+ def set_fields(self, vid_range, dmac_range):
+ """
+ set ip protocol field behavior
+ """
+
+ fields_config = {
+ 'vlan': {
+ 0: {'range': vid_range, 'action': 'inc'}},
+ 'mac': {
+ 'dst': {'range': dmac_range, 'action': 'inc'}},
+ 'ip': { 'src': {'action': 'random'}},
+ }
+
+ return fields_config
+
+ def get_vmdq_stats(self):
+ vmdq_dcb_session = self.dut.new_session()
+ vmdq_dcb_session.send_expect("kill -s SIGHUP `pgrep -fl vmdq_dcb_app | awk '{print $1}'`", "#", 20)
+ out = self.dut.get_session_output()
+ self.logger.info(out)
+ return out
+
+ def verify_all_vmdq_stats(self):
+ """
+ Every RX queue should have received approximately (+/-15%) the same number of incoming packets.
+ """
+ out = self.get_vmdq_stats()
+ lines_list = out.split("\r\n")
+ nb_packets = []
+ for pool_info in lines_list:
+ if pool_info.startswith('Pool'):
+ nb_packets += pool_info.split()[2:]
+ nb_packets = list(map(int, nb_packets))
+ self.verify(min(nb_packets) > 0, "Some queues don't get any packet!")
+ self.verify(float((max(nb_packets) - min(nb_packets))/max(nb_packets)) <= 0.15, "Too wide variation in queue stats")
+
+ def vmdq_dcb_test(self, npools, ntcs):
+ """
+ vmdq_dcb test according to pools, tcs.
+ """
+ self.start_application(npools, ntcs)
+
+ # Transmit traffic
+ tgen_input = self.get_tgen_input(self.prios)
+ vm_config = self.set_fields(npools, npools)
+ self.tester.pktgen.clear_streams()
+ # Start traffic transmission using approx 10% of line rate.
+ ratePercent = 50
+ # run packet generator
+ streams = self.pktgen_helper.prepare_stream_from_tginput(tgen_input, ratePercent, vm_config, self.tester.pktgen)
+ # set traffic option
+ options = {'duration': 15}
+ loss = self.tester.pktgen.measure_loss(stream_ids=streams, options=options)
+ self.logger.info("loss is [loss rate, SendNumbers, ReceNumbers]{}!".format(loss))
+ # Verify there is no packet loss
+ self.verify(loss[1] == loss[2], "Packet Loss! Send: %d, but only Receive: %d!".format(loss[1], loss[2]))
+ self.verify_all_vmdq_stats()
+
+ def test_perf_32pools_4tcs(self):
+
+ self.vmdq_dcb_test(32, 4)
+
+ def test_perf_16pools_8tcs(self):
+
+ self.vmdq_dcb_test(16, 8)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.rebuild_dpdk(4)
--
1.8.3.1
next reply other threads:[~2020-02-14 10:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-14 18:51 Lijuan Tu [this message]
2020-02-15 10:22 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1581706271-163689-1-git-send-email-lijuan.tu@intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).