* [dts] [PATCH] hotplug.py: Change expected output to testpmd prompt.
@ 2021-06-25 18:50 pvukkisala
0 siblings, 0 replies; 3+ messages in thread
From: pvukkisala @ 2021-06-25 18:50 UTC (permalink / raw)
To: dts; +Cc: sshankarnara, Phanendra Vukkisala
From: Phanendra Vukkisala <pvukkisala@marvell.com>
Due to not having testpmd as expected prompt, show port stats gets old output
causing test failure
Signed-off-by: Phanendra Vukkisala <pvukkisala@marvell.com>
---
tests/TestSuite_hotplug.py | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/tests/TestSuite_hotplug.py b/tests/TestSuite_hotplug.py
index f40c291..bb31a9d 100644
--- a/tests/TestSuite_hotplug.py
+++ b/tests/TestSuite_hotplug.py
@@ -75,8 +75,10 @@ class TestPortHotPlug(TestCase):
attach port
"""
# dpdk hotplug discern NIC by pci bus and include domid
- self.dut.send_expect("port attach %s" % self.dut.ports_info[port]['pci'], "is attached", 60)
- self.dut.send_expect("port start %s" % port, "Configuring Port", 120)
+ out = self.dut.send_expect("port attach %s" % self.dut.ports_info[port]['pci'], "testpmd>", 60)
+ self.verify("is attached" in out, "Failed to attach")
+ out = self.dut.send_expect("port start %s" % port, "testpmd>", 120)
+ self.verify("Configuring Port" in out, "Failed to start port")
# sleep 10 seconds for fortville update link stats
time.sleep(10)
self.dut.send_expect("show port info %s" % port, "testpmd>", 60)
@@ -85,10 +87,12 @@ class TestPortHotPlug(TestCase):
"""
detach port
"""
- self.dut.send_expect("port stop %s" % port, "Stopping ports", 60)
+ out = self.dut.send_expect("port stop %s" % port, "testpmd>", 60)
+ self.verify("Stopping ports" in out, "Failed to stop port")
# sleep 10 seconds for fortville update link stats
time.sleep(10)
- self.dut.send_expect("port detach %s" % port, "is detached", 60)
+ out = self.dut.send_expect("port detach %s" % port, "testpmd>", 60)
+ self.verify("is detached" in out, "Failed to detach port")
def test_after_attach(self):
"""
@@ -103,13 +107,15 @@ class TestPortHotPlug(TestCase):
self.dut.close_session(session_secondary)
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("stop", "testpmd>", 60)
self.detach(self.port)
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("clear port stats %s" % self.port, "testpmd>", 60)
self.send_packet(self.port)
out = self.dut.send_expect("show port stats %s" % self.port, "testpmd>", 60)
@@ -144,7 +150,8 @@ class TestPortHotPlug(TestCase):
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("clear port stats %s" % self.port, "testpmd>", 60)
self.send_packet(self.port)
out = self.dut.send_expect("show port stats %s" % self.port, "testpmd>", 60)
@@ -165,12 +172,14 @@ class TestPortHotPlug(TestCase):
testpmd_cmd = "%s " % self.path + eal_param + ' -- -i'
self.dut.send_expect(testpmd_cmd, "testpmd>", timeout=60)
self.dut.send_expect("port stop 0", "testpmd>")
- self.dut.send_expect("port detach 0", "Device is detached")
+ out = self.dut.send_expect("port detach 0", "testpmd>")
+ self.verify("Device is detached" in out, "Failed to detach")
stats = self.dut.send_expect("ls %s" % path, "#", timeout=3,
alt_session=True, verify=True)
self.verify(stats == 2, 'port detach failed')
time.sleep(1)
- self.dut.send_expect("port attach eth_vhost1,iface=%s,queues=1" % iface, "Port 0 is attached.")
+ out = self.dut.send_expect("port attach eth_vhost1,iface=%s,queues=1" % iface, "testpmd>")
+ self.verify("Port 0 is attached." in out, "Failed to attach")
self.dut.send_expect("port start 0", "testpmd>")
out = self.dut.send_expect("ls %s" % path, "#", timeout=3,
alt_session=True, verify=True)
--
1.7.9.5
^ permalink raw reply [flat|nested] 3+ messages in thread* [dts] [PATCH] hotplug.py: Change expected output to testpmd prompt.
@ 2021-06-27 7:17 pvukkisala
2021-07-01 8:45 ` Tu, Lijuan
0 siblings, 1 reply; 3+ messages in thread
From: pvukkisala @ 2021-06-27 7:17 UTC (permalink / raw)
To: dts; +Cc: Phanendra Vukkisala
From: Phanendra Vukkisala <pvukkisala@marvell.com>
Due to not having testpmd as expected prompt, show port stats gets old
output causing test failure
Signed-off-by: Phanendra Vukkisala <pvukkisala@marvell.com>
---
tests/TestSuite_hotplug.py | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/tests/TestSuite_hotplug.py b/tests/TestSuite_hotplug.py
index f40c291..bb31a9d 100644
--- a/tests/TestSuite_hotplug.py
+++ b/tests/TestSuite_hotplug.py
@@ -75,8 +75,10 @@ class TestPortHotPlug(TestCase):
attach port
"""
# dpdk hotplug discern NIC by pci bus and include domid
- self.dut.send_expect("port attach %s" % self.dut.ports_info[port]['pci'], "is attached", 60)
- self.dut.send_expect("port start %s" % port, "Configuring Port", 120)
+ out = self.dut.send_expect("port attach %s" % self.dut.ports_info[port]['pci'], "testpmd>", 60)
+ self.verify("is attached" in out, "Failed to attach")
+ out = self.dut.send_expect("port start %s" % port, "testpmd>", 120)
+ self.verify("Configuring Port" in out, "Failed to start port")
# sleep 10 seconds for fortville update link stats
time.sleep(10)
self.dut.send_expect("show port info %s" % port, "testpmd>", 60)
@@ -85,10 +87,12 @@ class TestPortHotPlug(TestCase):
"""
detach port
"""
- self.dut.send_expect("port stop %s" % port, "Stopping ports", 60)
+ out = self.dut.send_expect("port stop %s" % port, "testpmd>", 60)
+ self.verify("Stopping ports" in out, "Failed to stop port")
# sleep 10 seconds for fortville update link stats
time.sleep(10)
- self.dut.send_expect("port detach %s" % port, "is detached", 60)
+ out = self.dut.send_expect("port detach %s" % port, "testpmd>", 60)
+ self.verify("is detached" in out, "Failed to detach port")
def test_after_attach(self):
"""
@@ -103,13 +107,15 @@ class TestPortHotPlug(TestCase):
self.dut.close_session(session_secondary)
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("stop", "testpmd>", 60)
self.detach(self.port)
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("clear port stats %s" % self.port, "testpmd>", 60)
self.send_packet(self.port)
out = self.dut.send_expect("show port stats %s" % self.port, "testpmd>", 60)
@@ -144,7 +150,8 @@ class TestPortHotPlug(TestCase):
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("clear port stats %s" % self.port, "testpmd>", 60)
self.send_packet(self.port)
out = self.dut.send_expect("show port stats %s" % self.port, "testpmd>", 60)
@@ -165,12 +172,14 @@ class TestPortHotPlug(TestCase):
testpmd_cmd = "%s " % self.path + eal_param + ' -- -i'
self.dut.send_expect(testpmd_cmd, "testpmd>", timeout=60)
self.dut.send_expect("port stop 0", "testpmd>")
- self.dut.send_expect("port detach 0", "Device is detached")
+ out = self.dut.send_expect("port detach 0", "testpmd>")
+ self.verify("Device is detached" in out, "Failed to detach")
stats = self.dut.send_expect("ls %s" % path, "#", timeout=3,
alt_session=True, verify=True)
self.verify(stats == 2, 'port detach failed')
time.sleep(1)
- self.dut.send_expect("port attach eth_vhost1,iface=%s,queues=1" % iface, "Port 0 is attached.")
+ out = self.dut.send_expect("port attach eth_vhost1,iface=%s,queues=1" % iface, "testpmd>")
+ self.verify("Port 0 is attached." in out, "Failed to attach")
self.dut.send_expect("port start 0", "testpmd>")
out = self.dut.send_expect("ls %s" % path, "#", timeout=3,
alt_session=True, verify=True)
--
1.7.9.5
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [dts] [PATCH] hotplug.py: Change expected output to testpmd prompt.
2021-06-27 7:17 pvukkisala
@ 2021-07-01 8:45 ` Tu, Lijuan
0 siblings, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2021-07-01 8:45 UTC (permalink / raw)
To: pvukkisala, dts
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of pvukkisala@marvell.com
> Sent: 2021年6月27日 15:18
> To: dts@dpdk.org
> Cc: Phanendra Vukkisala <pvukkisala@marvell.com>
> Subject: [dts] [PATCH] hotplug.py: Change expected output to testpmd prompt.
>
> From: Phanendra Vukkisala <pvukkisala@marvell.com>
>
> Due to not having testpmd as expected prompt, show port stats gets old output
> causing test failure
>
> Signed-off-by: Phanendra Vukkisala <pvukkisala@marvell.com>
Applied
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-07-01 8:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-25 18:50 [dts] [PATCH] hotplug.py: Change expected output to testpmd prompt pvukkisala
2021-06-27 7:17 pvukkisala
2021-07-01 8:45 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).