From: <pvukkisala@marvell.com>
To: <dts@dpdk.org>
Cc: Phanendra Vukkisala <pvukkisala@marvell.com>
Subject: [dts] [PATCH] hotplug.py: Change expected output to testpmd prompt.
Date: Sun, 27 Jun 2021 12:47:45 +0530 [thread overview]
Message-ID: <1624778265-2134-1-git-send-email-pvukkisala@marvell.com> (raw)
From: Phanendra Vukkisala <pvukkisala@marvell.com>
Due to not having testpmd as expected prompt, show port stats gets old
output causing test failure
Signed-off-by: Phanendra Vukkisala <pvukkisala@marvell.com>
---
tests/TestSuite_hotplug.py | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/tests/TestSuite_hotplug.py b/tests/TestSuite_hotplug.py
index f40c291..bb31a9d 100644
--- a/tests/TestSuite_hotplug.py
+++ b/tests/TestSuite_hotplug.py
@@ -75,8 +75,10 @@ class TestPortHotPlug(TestCase):
attach port
"""
# dpdk hotplug discern NIC by pci bus and include domid
- self.dut.send_expect("port attach %s" % self.dut.ports_info[port]['pci'], "is attached", 60)
- self.dut.send_expect("port start %s" % port, "Configuring Port", 120)
+ out = self.dut.send_expect("port attach %s" % self.dut.ports_info[port]['pci'], "testpmd>", 60)
+ self.verify("is attached" in out, "Failed to attach")
+ out = self.dut.send_expect("port start %s" % port, "testpmd>", 120)
+ self.verify("Configuring Port" in out, "Failed to start port")
# sleep 10 seconds for fortville update link stats
time.sleep(10)
self.dut.send_expect("show port info %s" % port, "testpmd>", 60)
@@ -85,10 +87,12 @@ class TestPortHotPlug(TestCase):
"""
detach port
"""
- self.dut.send_expect("port stop %s" % port, "Stopping ports", 60)
+ out = self.dut.send_expect("port stop %s" % port, "testpmd>", 60)
+ self.verify("Stopping ports" in out, "Failed to stop port")
# sleep 10 seconds for fortville update link stats
time.sleep(10)
- self.dut.send_expect("port detach %s" % port, "is detached", 60)
+ out = self.dut.send_expect("port detach %s" % port, "testpmd>", 60)
+ self.verify("is detached" in out, "Failed to detach port")
def test_after_attach(self):
"""
@@ -103,13 +107,15 @@ class TestPortHotPlug(TestCase):
self.dut.close_session(session_secondary)
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("stop", "testpmd>", 60)
self.detach(self.port)
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("clear port stats %s" % self.port, "testpmd>", 60)
self.send_packet(self.port)
out = self.dut.send_expect("show port stats %s" % self.port, "testpmd>", 60)
@@ -144,7 +150,8 @@ class TestPortHotPlug(TestCase):
self.attach(self.port)
self.dut.send_expect("start", "testpmd>", 60)
- self.dut.send_expect("port detach %s" % self.port, "Port not stopped", 60)
+ out = self.dut.send_expect("port detach %s" % self.port, "testpmd>", 60)
+ self.verify("Port not stopped" in out, "able to detach port without stopping")
self.dut.send_expect("clear port stats %s" % self.port, "testpmd>", 60)
self.send_packet(self.port)
out = self.dut.send_expect("show port stats %s" % self.port, "testpmd>", 60)
@@ -165,12 +172,14 @@ class TestPortHotPlug(TestCase):
testpmd_cmd = "%s " % self.path + eal_param + ' -- -i'
self.dut.send_expect(testpmd_cmd, "testpmd>", timeout=60)
self.dut.send_expect("port stop 0", "testpmd>")
- self.dut.send_expect("port detach 0", "Device is detached")
+ out = self.dut.send_expect("port detach 0", "testpmd>")
+ self.verify("Device is detached" in out, "Failed to detach")
stats = self.dut.send_expect("ls %s" % path, "#", timeout=3,
alt_session=True, verify=True)
self.verify(stats == 2, 'port detach failed')
time.sleep(1)
- self.dut.send_expect("port attach eth_vhost1,iface=%s,queues=1" % iface, "Port 0 is attached.")
+ out = self.dut.send_expect("port attach eth_vhost1,iface=%s,queues=1" % iface, "testpmd>")
+ self.verify("Port 0 is attached." in out, "Failed to attach")
self.dut.send_expect("port start 0", "testpmd>")
out = self.dut.send_expect("ls %s" % path, "#", timeout=3,
alt_session=True, verify=True)
--
1.7.9.5
next reply other threads:[~2021-06-27 7:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-27 7:17 pvukkisala [this message]
2021-07-01 8:45 ` Tu, Lijuan
-- strict thread matches above, loose matches on Subject: below --
2021-06-25 18:50 pvukkisala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1624778265-2134-1-git-send-email-pvukkisala@marvell.com \
--to=pvukkisala@marvell.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).