* [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority @ 2021-09-15 5:39 Jiale Song 2021-09-15 5:39 ` [dts] [PATCH V2 2/2] tests/cvl_dcf_flow_priority: modify the script according to the testplan Jiale Song 2021-09-27 6:31 ` [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority Tu, Lijuan 0 siblings, 2 replies; 5+ messages in thread From: Jiale Song @ 2021-09-15 5:39 UTC (permalink / raw) To: dts; +Cc: Jiale Song because the priority of the dpdk rule is changed from 0<1<2... to 0>1>2..., modify the testplan Signed-off-by: Jiale Song <songx.jiale@intel.com> --- .../cvl_dcf_flow_priority_test_plan.rst | 26 +++++++++---------- 1 file changed, 13 insertions(+), 13 deletions(-) mode change 100644 => 100755 test_plans/cvl_dcf_flow_priority_test_plan.rst diff --git a/test_plans/cvl_dcf_flow_priority_test_plan.rst b/test_plans/cvl_dcf_flow_priority_test_plan.rst old mode 100644 new mode 100755 index 8ae6052..38e86a7 --- a/test_plans/cvl_dcf_flow_priority_test_plan.rst +++ b/test_plans/cvl_dcf_flow_priority_test_plan.rst @@ -118,16 +118,16 @@ test steps for supported pattern ================================ 1. validate rules: two rules have same pattern, input set but different priority and action(priority 0 -> to vf 1, priority 1 -> to vf 2). 2. create rules and list rules. -3. send matched packets, check vf 2 receive the packets for hiting the priority 1. +3. send matched packets, check vf 1 receive the packets for hiting the priority 0. 4. send mismatched packets, check the packets are not received by vf 1 or 2. -5. destroy rule with priority 1, list rules. -6. send matched packets, check vf 1 receive the packets for hiting the priority 0. +5. destroy rule with priority 0, list rules. +6. send matched packets, check vf 2 receive the packets for hiting the priority 1. 7. send mismatched packets, check the packets are not received by vf 1 or 2. -8. recreate rules which priority is 1, list rule. -9. destroy rule with priority 0, list rules. -10. send matched packets, check vf 2 receive the packets for hiting the priority 1. +8. recreate rules which priority is 0, list rule. +9. destroy rule with priority 1, list rules. +10. send matched packets, check vf 1 receive the packets for hiting the priority 0. 11. send mismatched packets, check the packets are not received by vf 1 or 2. -12. destroy rule with priority 1, list rules. +12. destroy rule with priority 0, list rules. 13. send matched packets, check the packets are not received by vf 1 or 2. @@ -1745,12 +1745,12 @@ subcase 3: some rules overlap ----------------------------- 1. create rules:: - flow create 0 priority 0 ingress pattern eth / vlan / vlan / pppoes / pppoe_proto_id is 0x21 / end actions vf id 1 / end - flow create 0 priority 0 ingress pattern eth / vlan / vlan tci is 2 / end actions vf id 1 / end - flow create 0 priority 1 ingress pattern eth / vlan / vlan / pppoes seid is 1 / ipv4 / end actions vf id 2 / end - flow create 0 priority 1 ingress pattern eth dst is 00:00:00:01:03:03 / vlan / vlan / end actions vf id 2 / end - flow create 0 priority 1 ingress pattern eth dst is 00:00:00:01:03:03 / end actions vf id 3 / end - flow create 0 priority 1 ingress pattern eth / vlan tci is 1 / vlan tci is 2 / end actions vf id 3 / end + flow create 0 priority 1 ingress pattern eth / vlan / vlan / pppoes / pppoe_proto_id is 0x21 / end actions vf id 1 / end + flow create 0 priority 1 ingress pattern eth / vlan / vlan tci is 2 / end actions vf id 1 / end + flow create 0 priority 0 ingress pattern eth / vlan / vlan / pppoes seid is 1 / ipv4 / end actions vf id 2 / end + flow create 0 priority 0 ingress pattern eth dst is 00:00:00:01:03:03 / vlan / vlan / end actions vf id 2 / end + flow create 0 priority 0 ingress pattern eth dst is 00:00:00:01:03:03 / end actions vf id 3 / end + flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / vlan tci is 2 / end actions vf id 3 / end 2. check all the rules exist in the list:: -- 2.17.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [dts] [PATCH V2 2/2] tests/cvl_dcf_flow_priority: modify the script according to the testplan 2021-09-15 5:39 [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority Jiale Song @ 2021-09-15 5:39 ` Jiale Song 2021-10-22 9:22 ` Tu, Lijuan 2021-09-27 6:31 ` [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority Tu, Lijuan 1 sibling, 1 reply; 5+ messages in thread From: Jiale Song @ 2021-09-15 5:39 UTC (permalink / raw) To: dts; +Cc: Jiale Song Signed-off-by: Jiale Song <songx.jiale@intel.com> --- tests/TestSuite_cvl_dcf_flow_priority.py | 48 ++++++++++++------------ 1 file changed, 25 insertions(+), 23 deletions(-) mode change 100644 => 100755 tests/TestSuite_cvl_dcf_flow_priority.py diff --git a/tests/TestSuite_cvl_dcf_flow_priority.py b/tests/TestSuite_cvl_dcf_flow_priority.py old mode 100644 new mode 100755 index 07d99d2..8e38df9 --- a/tests/TestSuite_cvl_dcf_flow_priority.py +++ b/tests/TestSuite_cvl_dcf_flow_priority.py @@ -1278,8 +1278,8 @@ class CVLDCFFlowPriorityTest(TestCase): res = filter(bool, map(p_spec.match, out_lines)) result = [i.group(1) for i in res] if need_verify: - self.verify(result == rule_list, - "the rule list is not the same. expect %s, result %s" % (rule_list, result)) + self.verify(sorted(result) == rule_list, + "the rule list is not the same. expect %s, result %s" % (rule_list, sorted(result))) else: return result @@ -1320,6 +1320,7 @@ class CVLDCFFlowPriorityTest(TestCase): rule1=rte_flow_pattern[0:14] + "priority 0" + rte_flow_pattern[13:length] rule2=rte_flow_pattern[0:14] + "priority 1" + rte_flow_pattern[13:length-7]+ "2" + rte_flow_pattern[length-6:length] rte_flow=[rule1, rule2] + #validate 2 rule self.validate_switch_filter_rule(rte_flow) #create 2 rule @@ -1327,31 +1328,34 @@ class CVLDCFFlowPriorityTest(TestCase): self.check_switch_filter_rule_list(0, rule_list) #send matched packets and check matched_dic = test_vector["matched"] - matched_dic["check_func"]["param"]["expect_port"]=2 self.send_and_check_packets(matched_dic) #send mismatched packets and check mismatched_dic = test_vector["mismatched"] mismatched_dic["check_func"]["param"]["expect_port"]=[1,2] mismatched_dic["expect_results"]["expect_pkts"]=[0,0] self.send_and_check_packets(mismatched_dic) - #destroy rule with priority 1 - self.destroy_switch_filter_rule(0, rule_list[1]) - self.check_switch_filter_rule_list(0, ['0']) - #send matched packets and check - destroy_dict1 = copy.deepcopy(matched_dic) - destroy_dict1["check_func"]["param"]["expect_port"]=1 - self.send_and_check_packets(destroy_dict1) - #recreate rule with priority 1 - self.create_switch_filter_rule(rte_flow[1]) - self.check_switch_filter_rule_list(0, rule_list) + #destroy rule with priority 0 self.destroy_switch_filter_rule(0, rule_list[0]) + rule_list.remove('0') self.check_switch_filter_rule_list(0, ['1']) #send matched packets and check + destroy_dict1 = copy.deepcopy(matched_dic) + destroy_dict1["check_func"]["param"]["expect_port"]=2 + self.send_and_check_packets(destroy_dict1) + + #recreate rule with priority 0 (rule 2) + self.create_switch_filter_rule(rte_flow[0]) + rule_list.insert(0, '2') + #destroy rule with priority 1 + self.destroy_switch_filter_rule(0, rule_list[1]) + self.check_switch_filter_rule_list(0, ['2']) + #send matched packets and check destroy_dict2 = copy.deepcopy(matched_dic) self.send_and_check_packets(destroy_dict2) - #destroy rule with priority 1 and check - self.destroy_switch_filter_rule(0, rule_list[1]) + + #destroy rule with priority 0 and check + self.destroy_switch_filter_rule(0, rule_list[0]) self.check_switch_filter_rule_list(0, []) destroy_dict3 = copy.deepcopy(matched_dic) if isinstance(destroy_dict3["expect_results"]["expect_pkts"], list): @@ -1679,7 +1683,6 @@ class CVLDCFFlowPriorityTest(TestCase): rule=["flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions vf id 2 / end", "flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions vf id 2 / end"] rule_list=self.create_switch_filter_rule(rule) - #self.check_switch_filter_rule_list(0, rule_list) matched_dic = {"scapy_str":['Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.168.0.1",dst="192.168.0.2",tos=4,ttl=2)/TCP()/("X"*480)'], "check_func":{"func":rfc.check_vf_rx_packets_number, "param":{"expect_port":2, "expect_queue":"null"}}, @@ -1694,7 +1697,6 @@ class CVLDCFFlowPriorityTest(TestCase): rule=["flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions vf id 1 / end", "flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions vf id 2 / end"] rule_list=self.create_switch_filter_rule(rule) - self.check_switch_filter_rule_list(0, rule_list) matched_dic = {"scapy_str":['Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.168.0.1",dst="192.168.0.2",tos=4,ttl=2)/TCP()/("X"*480)'], "check_func":{"func":rfc.check_vf_rx_packets_number, "param":{"expect_port":[1,2], "expect_queue":"null"}}, @@ -1706,12 +1708,12 @@ class CVLDCFFlowPriorityTest(TestCase): #subcase 3: some rules overlap self.launch_testpmd() - rule=["flow create 0 priority 0 ingress pattern eth / vlan / vlan / pppoes / pppoe_proto_id is 0x21 / end actions vf id 1 / end", - "flow create 0 priority 0 ingress pattern eth / vlan / vlan tci is 2 / end actions vf id 1 / end", - "flow create 0 priority 1 ingress pattern eth / vlan / vlan / pppoes seid is 1 / ipv4 / end actions vf id 2 / end", - "flow create 0 priority 1 ingress pattern eth dst is 00:00:00:01:03:03 / vlan / vlan / end actions vf id 2 / end", - "flow create 0 priority 1 ingress pattern eth dst is 00:00:00:01:03:03 / end actions vf id 3 / end", - "flow create 0 priority 1 ingress pattern eth / vlan tci is 1 / vlan tci is 2 / end actions vf id 3 / end"] + rule=["flow create 0 priority 1 ingress pattern eth / vlan / vlan / pppoes / pppoe_proto_id is 0x21 / end actions vf id 1 / end", + "flow create 0 priority 1 ingress pattern eth / vlan / vlan tci is 2 / end actions vf id 1 / end", + "flow create 0 priority 0 ingress pattern eth / vlan / vlan / pppoes seid is 1 / ipv4 / end actions vf id 2 / end", + "flow create 0 priority 0 ingress pattern eth dst is 00:00:00:01:03:03 / vlan / vlan / end actions vf id 2 / end", + "flow create 0 priority 0 ingress pattern eth dst is 00:00:00:01:03:03 / end actions vf id 3 / end", + "flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / vlan tci is 2 / end actions vf id 3 / end"] rule_list=self.create_switch_filter_rule(rule) self.check_switch_filter_rule_list(0, rule_list) matched_dic = {"scapy_str":['Ether(dst="00:00:00:01:03:03")/Dot1Q(vlan=1)/Dot1Q(vlan=2)/Raw("x"*480)'], -- 2.17.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V2 2/2] tests/cvl_dcf_flow_priority: modify the script according to the testplan 2021-09-15 5:39 ` [dts] [PATCH V2 2/2] tests/cvl_dcf_flow_priority: modify the script according to the testplan Jiale Song @ 2021-10-22 9:22 ` Tu, Lijuan 0 siblings, 0 replies; 5+ messages in thread From: Tu, Lijuan @ 2021-10-22 9:22 UTC (permalink / raw) To: Jiale, SongX, dts; +Cc: Jiale, SongX > -----Original Message----- > From: dts <dts-bounces@dpdk.org> On Behalf Of Jiale Song > Sent: 2021年9月15日 13:40 > To: dts@dpdk.org > Cc: Jiale, SongX <songx.jiale@intel.com> > Subject: [dts] [PATCH V2 2/2] tests/cvl_dcf_flow_priority: modify the script > according to the testplan > > Signed-off-by: Jiale Song <songx.jiale@intel.com> Applied, thanks ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority 2021-09-15 5:39 [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority Jiale Song 2021-09-15 5:39 ` [dts] [PATCH V2 2/2] tests/cvl_dcf_flow_priority: modify the script according to the testplan Jiale Song @ 2021-09-27 6:31 ` Tu, Lijuan 2021-10-20 9:47 ` Huang, ZhiminX 1 sibling, 1 reply; 5+ messages in thread From: Tu, Lijuan @ 2021-09-27 6:31 UTC (permalink / raw) To: Jiale, SongX, dts; +Cc: Jiale, SongX > -----Original Message----- > From: dts <dts-bounces@dpdk.org> On Behalf Of Jiale Song > Sent: 2021年9月15日 13:40 > To: dts@dpdk.org > Cc: Jiale, SongX <songx.jiale@intel.com> > Subject: [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule > priority > > because the priority of the dpdk rule is changed from 0<1<2... to 0>1>2..., > modify the testplan > > Signed-off-by: Jiale Song <songx.jiale@intel.com> Could you please provide me dpdk commit ? ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority 2021-09-27 6:31 ` [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority Tu, Lijuan @ 2021-10-20 9:47 ` Huang, ZhiminX 0 siblings, 0 replies; 5+ messages in thread From: Huang, ZhiminX @ 2021-10-20 9:47 UTC (permalink / raw) To: Tu, Lijuan, dts; +Cc: Jiale, SongX > -----Original Message----- > From: dts <dts-bounces@dpdk.org> On Behalf Of Tu, Lijuan > Sent: Monday, September 27, 2021 2:32 PM > To: Jiale, SongX <songx.jiale@intel.com>; dts@dpdk.org > Cc: Jiale, SongX <songx.jiale@intel.com> > Subject: Re: [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule > priority > > > -----Original Message----- > > From: dts <dts-bounces@dpdk.org> On Behalf Of Jiale Song > > Sent: 2021年9月15日 13:40 > > To: dts@dpdk.org > > Cc: Jiale, SongX <songx.jiale@intel.com> > > Subject: [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify > > rule priority > > > > because the priority of the dpdk rule is changed from 0<1<2... to > > 0>1>2..., modify the testplan > > > > Signed-off-by: Jiale Song <songx.jiale@intel.com> > > Could you please provide me dpdk commit ? According to dpdk commit 72908beba944b57e3e1cbe0edf7728a192230d2b, modified testplan. ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-10-22 9:22 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-09-15 5:39 [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority Jiale Song 2021-09-15 5:39 ` [dts] [PATCH V2 2/2] tests/cvl_dcf_flow_priority: modify the script according to the testplan Jiale Song 2021-10-22 9:22 ` Tu, Lijuan 2021-09-27 6:31 ` [dts] [PATCH V2 1/2] test_plans/cvl_dcf_flow_priority: modify rule priority Tu, Lijuan 2021-10-20 9:47 ` Huang, ZhiminX
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).