From: Jiale Song <songx.jiale@intel.com>
To: dts@dpdk.org
Cc: Jiale Song <songx.jiale@intel.com>
Subject: [dts] [PATCH V1 2/9] tests/cvl_qinq: update case code for driver change
Date: Wed, 20 Oct 2021 16:06:54 +0800 [thread overview]
Message-ID: <1634717221-221075-2-git-send-email-songx.jiale@intel.com> (raw)
In-Reply-To: <1634717221-221075-1-git-send-email-songx.jiale@intel.com>
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
test_plans/cvl_qinq_test_plan.rst | 8 ++++----
tests/TestSuite_cvl_qinq.py | 16 ++++++++--------
2 files changed, 12 insertions(+), 12 deletions(-)
mode change 100644 => 100755 tests/TestSuite_cvl_qinq.py
diff --git a/test_plans/cvl_qinq_test_plan.rst b/test_plans/cvl_qinq_test_plan.rst
index 4f44150..e725861 100644
--- a/test_plans/cvl_qinq_test_plan.rst
+++ b/test_plans/cvl_qinq_test_plan.rst
@@ -73,7 +73,7 @@ Prerequisites
6. Enable vlan prune flag::
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable on
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning off
7. Generate 4 VFs on PF0(not all the VFs are used)::
@@ -130,7 +130,7 @@ Prerequisites
13. For AVF QinQ test cases(10-14), recreate Generate 1 VFs on PF0, reconfig the VF then launch testpmd::
echo 0 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable off
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning on
echo 1 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
ip link set ens785f0 vf 0 mac 00:11:22:33:44:11
ip link set dev ens785f0 vf 0 spoofchk off
@@ -908,7 +908,7 @@ Test case 09: vlan filter when pvid enable
1. reset test environment, create vfs and disable vlan prune flag::
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable off
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning on
2. repeat Prerequisites steps from 7 to 12
@@ -1116,7 +1116,7 @@ Test case 12: Enable/Disable IAVF VLAN header insertion
1. enable vf-vlan-prune-disable flag::
echo 0 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable on
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning off
2. set up test environment again::
diff --git a/tests/TestSuite_cvl_qinq.py b/tests/TestSuite_cvl_qinq.py
old mode 100644
new mode 100755
index 0c950b0..01fae96
--- a/tests/TestSuite_cvl_qinq.py
+++ b/tests/TestSuite_cvl_qinq.py
@@ -253,7 +253,7 @@ class TestCvlQinq(TestCase):
Run before each test case.
'''
self.pci_list = []
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable on' % self.pf_interface, "#")
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning off' % self.pf_interface, "# ")
def setup_pf_vfs_env(self, vfs_num=4):
@@ -644,7 +644,7 @@ class TestCvlQinq(TestCase):
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
pkt_list2 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, '# ')
self.setup_pf_vfs_env()
self.launch_testpmd(dcf_param=True)
self.pmd_output.execute_cmd("vlan set filter on 1")
@@ -677,7 +677,7 @@ class TestCvlQinq(TestCase):
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
pkt_list2 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("vlan set filter on 0")
@@ -710,7 +710,7 @@ class TestCvlQinq(TestCase):
"""
pkt_list = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("vlan set filter on 0")
@@ -744,7 +744,7 @@ class TestCvlQinq(TestCase):
out_vlan = 1
pkt_list = ['Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable on' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning off' % self.pf_interface, '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("stop")
@@ -787,7 +787,7 @@ class TestCvlQinq(TestCase):
"""
param = '--rxq=16 --txq=16 --disable-crc-strip'
pkt = 'Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.pmd_output.start_testpmd(cores='1S/4C/1T', param=param, ports=self.pci_list, socket=self.ports_socket)
self.pmd_output.execute_cmd("set fwd mac")
@@ -819,7 +819,7 @@ class TestCvlQinq(TestCase):
AVF CRC strip and Vlan strip co-exists
"""
pkt = 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, "#")
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, "# ")
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.check_vlan_offload(vlan_type="strip", stats="off")
@@ -873,4 +873,4 @@ class TestCvlQinq(TestCase):
self.destroy_iavf()
def tear_down_all(self):
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
\ No newline at end of file
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning off' % self.pf_interface, '# ')
--
2.17.1
next prev parent reply other threads:[~2021-10-20 7:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-20 8:06 [dts] [PATCH V1 1/9] tests/cvl_dcf_flow_priority: " Jiale Song
2021-10-20 8:06 ` Jiale Song [this message]
2021-10-20 8:06 ` [dts] [PATCH V1 3/9] tests/cvl_advanced_iavf_rss_vlan_esp_ah_l2tp_pfcp: " Jiale Song
2021-10-20 8:06 ` [dts] [PATCH V1 4/9] tests/cvl_dcf_switch_filter: " Jiale Song
2021-10-20 8:06 ` [dts] [PATCH V1 5/9] tests/cvl_dcf_switch_filter_pppoe: " Jiale Song
2021-10-20 8:06 ` [dts] [PATCH V1 6/9] tests/cvl_vf_support_multicast_address: " Jiale Song
2021-10-20 8:06 ` [dts] [PATCH V1 7/9] tests/iavf_flexible_descriptor: " Jiale Song
2021-10-20 8:07 ` [dts] [PATCH V1 8/9] tests/kernelpf_iavf: " Jiale Song
2021-10-20 8:07 ` [dts] [PATCH V1 9/9] tests/l2tp_esp_coverage: " Jiale Song
2021-10-25 9:09 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1634717221-221075-2-git-send-email-songx.jiale@intel.com \
--to=songx.jiale@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).