* [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule
@ 2021-10-26 2:03 Jiale Song
2021-10-26 2:03 ` [dts] [PATCH V3 2/2] tests/iavf_fdir: create rules with less consumption of TCAM rule in suite Jiale Song
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Jiale Song @ 2021-10-26 2:03 UTC (permalink / raw)
To: dts; +Cc: Jiale Song
when dpdk fixed a gtpogre bug, the code design changed, so some rules can be created successfully
now, these rules should be deleted from the negative case
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
test_plans/iavf_fdir_test_plan.rst | 37 ++++++++++++++----------------
1 file changed, 17 insertions(+), 20 deletions(-)
diff --git a/test_plans/iavf_fdir_test_plan.rst b/test_plans/iavf_fdir_test_plan.rst
index 62d0ad12..784392e2 100644
--- a/test_plans/iavf_fdir_test_plan.rst
+++ b/test_plans/iavf_fdir_test_plan.rst
@@ -453,15 +453,13 @@ Send packets
p_gtpu8 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IPv6()/UDP()/Raw('x'*20)
p_gtpu9 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IPv6()/TCP(sport=22,dport=23)/Raw('x'*20)
p_gtpu10 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IPv6()/ICMP()/Raw('x'*20)
+ p_gtpu11 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/Raw('x'*20)
mismatched packets::
- p_gtpu11 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IP()/SCTP()/Raw('x'*20)
- p_gtpu12 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IPv6()/SCTP()/Raw('x'*20)
- p_gtpu13 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x1234567)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IP()/Raw('x'*20)
- p_gtpu14 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x35)/IP()/Raw('x'*20)
- p_gtpu15 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/IP()/Raw('x'*20)
- p_gtpu16 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/Raw('x'*20)
+ p_gtpu12 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x1234567)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IP()/Raw('x'*20)
+ p_gtpu13 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x35)/IP()/Raw('x'*20)
+ p_gtpu14 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/IP()/Raw('x'*20)
* MAC_IPV4_GTPU
@@ -477,12 +475,10 @@ Send packets
p_gtpu8 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/IPv6()/UDP()/Raw('x'*20)
p_gtpu9 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/IPv6()/TCP(sport=22, dport=23)/Raw('x'*20)
p_gtpu10 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/IPv6()/ICMP()/Raw('x'*20)
+ p_gtpu11 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/Raw('x'*20)
mismatched packets::
- p_gtpu12 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/Raw('x'*20)
- p_gtpu13 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/IP()/SCTP()/Raw('x'*20)
- p_gtpu14 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/IPv6()/SCTP()/Raw('x'*20)
p_gtpu15 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x1234567)/IP()/Raw('x'*20)
* MAC_IPV6_GTPU_EH
@@ -4697,20 +4693,20 @@ Subcase 1: 128 profiles
2. create 8 rules with different patterns on each port::
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth type is 0x8863 / end actions queue index 1 / mark id 1 / end
- flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 2 / end
+ flow create 0 ingress pattern eth / ipv4 / l2tpv3oip session_id is 1 / end actions queue index 1 / mark / end
+ flow create 0 ingress pattern eth / ipv6 / l2tpv3oip session_id is 2 / end actions queue index 1 / mark / end
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions queue index 2 / mark / end
+ flow create 0 ingress pattern eth / ipv6 / tcp / end actions queue index 2 / mark / end
+ flow create 0 ingress pattern eth / ipv4 / esp spi is 1 / end actions queue index 3 / mark / end
+ flow create 0 ingress pattern eth / ipv6 / esp spi is 2 / end actions queue index 3 / mark / end
+ flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 4 / mark id 1 / end
+ flow create 0 ingress pattern eth / ipv6 / udp / pfcp s_field is 1 / end actions queue index 4 / end
+
created successfully on port 0-12,
failed from rule 6 on port 13::
- testpmd> flow create 13 ingress pattern eth type is 0x8863 / end actions queue index 1 / mark id 1 / end
- eth
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 4 / mark id 1 / end
iavf_execute_vf_cmd(): No response or return failure (-5) for cmd 47
iavf_fdir_add(): fail to execute command OP_ADD_FDIR_FILTER
iavf_flow_create(): Failed to create flow
@@ -4739,6 +4735,7 @@ Subcase 1: 128 profiles
profile 0 and profile 1 are default profile for specific packet.
we design case with 2*100G card, so 110 profiles can be used for vf.
if we use 4*25G card, only 94 profiles can be used for vf.
+ if card is chapman beach 100g*2, one pf port equals a general 100g*2 card,so 118 profiles can be used for vf
4. send matched packets to vf 12,
the packets are redirected to the expected queue.
@@ -7292,4 +7289,4 @@ Subcase 6: MAC_IPV6_GRE_IPV6_UDP mark
-------------------------------------
each subcase is the same as the subcase of Test case: MAC_IPV6_GRE_IPV6_TCP pattern, just only pattern is different,
-replace "tcp" with "udp" in all the subcases
\ No newline at end of file
+replace "tcp" with "udp" in all the subcases
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread* [dts] [PATCH V3 2/2] tests/iavf_fdir: create rules with less consumption of TCAM rule in suite
2021-10-26 2:03 [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule Jiale Song
@ 2021-10-26 2:03 ` Jiale Song
2021-10-26 5:15 ` [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule Tu, Lijuan
2021-10-27 1:29 ` Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: Jiale Song @ 2021-10-26 2:03 UTC (permalink / raw)
To: dts; +Cc: Jiale Song
modify the suite according to the testplan
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
tests/TestSuite_iavf_fdir.py | 62 ++++++++++++++++++++++--------------
1 file changed, 38 insertions(+), 24 deletions(-)
diff --git a/tests/TestSuite_iavf_fdir.py b/tests/TestSuite_iavf_fdir.py
index 27ceb14b..e2b7af6b 100755
--- a/tests/TestSuite_iavf_fdir.py
+++ b/tests/TestSuite_iavf_fdir.py
@@ -8348,6 +8348,7 @@ class TestIAVFFdir(TestCase):
create same rules on pf and vf, no conflict
"""
self.dut.kill_all()
+ self.setup_2pf_4vf_env()
self.session_secondary = self.dut.new_session()
self.session_third = self.dut.new_session()
@@ -8499,6 +8500,7 @@ class TestIAVFFdir(TestCase):
create same input set but different action rules on pf and vf, no conflict.
"""
self.dut.kill_all()
+ self.setup_2pf_4vf_env()
self.session_secondary = self.dut.new_session()
self.session_third = self.dut.new_session()
@@ -8818,6 +8820,15 @@ class TestIAVFFdir(TestCase):
nex_cnt = 94 // 8
elif len(self.dut_ports) == 2:
nex_cnt = 110 // 8
+ # check the card is chapman beach 100g*2 or not
+ pf_pci = self.dut.ports_info[0]['pci']
+ out = self.dut.send_expect('lspci -s {} -vvv |grep "Product Name"'.format(pf_pci), '#')
+ res = re.search(r"Network Adapter\s+(?P<product_name>E810-.*)", out)
+ self.verify(res, "product name not found'")
+ # if card is chapman beach 100g*2, one pf port equals a general 100g*2 card,so 118 profiles can be used for vf
+ if 'E810-2CQDA2' in res.group('product_name'):
+ nex_cnt = 118 // 8
+
else:
self.verify(False, 'The number of ports is not supported')
@@ -8827,43 +8838,46 @@ class TestIAVFFdir(TestCase):
self.config_testpmd()
for port_id in range(nex_cnt):
+ # The number of rules created is affected by the profile and TCAM. The maximum profile is 128 and the maximum
+ # TCAM is 512. In order to test the maximum profile, need to create rules that consume less TCAM to ensure
+ # that the profile will reach the maximum before TCAM exhausted
rules = [
- "flow create %d ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end" % port_id,
- "flow create %d ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end" % port_id,
- "flow create %d ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end" % port_id,
- "flow create %d ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end" % port_id,
- "flow create %d ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end" % port_id,
- "flow create %d ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end" % port_id,
- "flow create %d ingress pattern eth type is 0x8863 / end actions queue index 1 / mark id 1 / end" % port_id,
- "flow create %d ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 2 / end" % port_id]
- self.create_fdir_rule(rules, check_stats=True)
+ "flow create {} ingress pattern eth / ipv4 / l2tpv3oip session_id is 1 / end actions queue index 1 / mark / end",
+ "flow create {} ingress pattern eth / ipv6 / l2tpv3oip session_id is 2 / end actions queue index 1 / mark / end",
+ "flow create {} ingress pattern eth / ipv4 / tcp / end actions queue index 2 / mark / end",
+ "flow create {} ingress pattern eth / ipv6 / tcp / end actions queue index 2 / mark / end",
+ "flow create {} ingress pattern eth / ipv4 / esp spi is 1 / end actions queue index 3 / mark / end",
+ "flow create {} ingress pattern eth / ipv6 / esp spi is 2 / end actions queue index 3 / mark / end",
+ "flow create {} ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 4 / mark id 1 / end",
+ "flow create {} ingress pattern eth / ipv6 / udp / pfcp s_field is 1 / end actions queue index 4 / end"]
+ self.create_fdir_rule([rule.format(port_id) for rule in rules], check_stats=True)
rules = [
- "flow create {} ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end".format(nex_cnt),
- "flow create {} ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end".format(nex_cnt),
- "flow create {} ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end".format(nex_cnt),
- "flow create {} ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end".format(nex_cnt),
- "flow create {} ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end".format(nex_cnt),
- "flow create {} ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end".format(nex_cnt)]
- self.create_fdir_rule(rules, check_stats=True)
-
- rule = "flow create {} ingress pattern eth type is 0x8863 / end actions queue index 1 / mark id 1 / end".format(nex_cnt)
+ "flow create {} ingress pattern eth / ipv4 / l2tpv3oip session_id is 1 / end actions queue index 1 / mark / end",
+ "flow create {} ingress pattern eth / ipv6 / l2tpv3oip session_id is 2 / end actions queue index 1 / mark / end",
+ "flow create {} ingress pattern eth / ipv4 / tcp / end actions queue index 2 / mark / end",
+ "flow create {} ingress pattern eth / ipv6 / tcp / end actions queue index 2 / mark / end",
+ "flow create {} ingress pattern eth / ipv4 / esp spi is 1 / end actions queue index 3 / mark / end",
+ "flow create {} ingress pattern eth / ipv6 / esp spi is 2 / end actions queue index 3 / mark / end"]
+ self.create_fdir_rule([rule.format(nex_cnt) for rule in rules], check_stats=True)
+
+ rule = "flow create {} ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 4 / mark id 1 / end".format(nex_cnt)
self.create_fdir_rule(rule, check_stats=False)
- pkt1 = 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21")/UDP(sport=22, dport=23)/ Raw("x" * 80)'
+ pkt1 = 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21")/TCP()/Raw("x" * 80)'
out = self.send_pkts_getouput(pkts=pkt1)
- rfc.check_iavf_fdir_mark(out, pkt_num=1, check_param={"port_id": nex_cnt, "mark_id": 0, "queue": 1}, stats=True)
- pkt2 = 'Ether(dst="00:11:22:33:44:55", type=0x8863)/IP()/Raw("x" * 80)'
+ rfc.check_iavf_fdir_mark(out, pkt_num=1, check_param={"port_id": nex_cnt, "mark_id": 0, "queue": 2}, stats=True)
+ pkt2 = 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21")/UDP(dport=8805)/PFCP(S=0)/Raw("x" * 80)'
out = self.send_pkts_getouput(pkts=pkt2)
- rfc.check_iavf_fdir_mark(out, pkt_num=1, check_param={"port_id": nex_cnt, "mark_id": 1, "queue": 1}, stats=False)
+ rfc.check_iavf_fdir_mark(out, pkt_num=1, check_param={"port_id": nex_cnt, "mark_id": 1, "queue": 4}, stats=False)
self.dut.send_expect("flow flush {}".format(nex_cnt), "testpmd> ")
self.check_fdir_rule(port_id=(nex_cnt), stats=False)
out = self.send_pkts_getouput(pkts=pkt1)
- rfc.check_iavf_fdir_mark(out, pkt_num=1, check_param={"port_id": nex_cnt, "mark_id": 0, "queue": 1}, stats=False)
+ rfc.check_iavf_fdir_mark(out, pkt_num=1, check_param={"port_id": nex_cnt, "mark_id": 0, "queue": 2}, stats=False)
self.create_fdir_rule(rule, check_stats=True)
out = self.send_pkts_getouput(pkts=pkt2)
- rfc.check_iavf_fdir_mark(out, pkt_num=1, check_param={"port_id": nex_cnt, "mark_id": 1, "queue": 1}, stats=True)
+ rfc.check_iavf_fdir_mark(out, pkt_num=1, check_param={"port_id": nex_cnt, "mark_id": 1, "queue": 4}, stats=True)
def test_stress_port_stop_start(self):
"""
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule
2021-10-26 2:03 [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule Jiale Song
2021-10-26 2:03 ` [dts] [PATCH V3 2/2] tests/iavf_fdir: create rules with less consumption of TCAM rule in suite Jiale Song
@ 2021-10-26 5:15 ` Tu, Lijuan
2021-10-27 1:29 ` Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2021-10-26 5:15 UTC (permalink / raw)
To: Jiale, SongX, dts; +Cc: Jiale, SongX
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Jiale Song
> Sent: 2021年10月26日 10:04
> To: dts@dpdk.org
> Cc: Jiale, SongX <songx.jiale@intel.com>
> Subject: [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less
> consumption TCAM rule
>
> when dpdk fixed a gtpogre bug, the code design changed, so some rules can be
> created successfully now, these rules should be deleted from the negative case
>
> Signed-off-by: Jiale Song <songx.jiale@intel.com>
Could you please provide dpdk commit id ?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule
2021-10-26 2:03 [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule Jiale Song
2021-10-26 2:03 ` [dts] [PATCH V3 2/2] tests/iavf_fdir: create rules with less consumption of TCAM rule in suite Jiale Song
2021-10-26 5:15 ` [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule Tu, Lijuan
@ 2021-10-27 1:29 ` Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2021-10-27 1:29 UTC (permalink / raw)
To: Jiale, SongX, dts; +Cc: Jiale, SongX
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Jiale Song
> Sent: 2021年10月26日 10:04
> To: dts@dpdk.org
> Cc: Jiale, SongX <songx.jiale@intel.com>
> Subject: [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less
> consumption TCAM rule
>
> when dpdk fixed a gtpogre bug, the code design changed, so some rules can be
> created successfully now, these rules should be deleted from the negative case
>
> Signed-off-by: Jiale Song <songx.jiale@intel.com>
Applied
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-10-27 1:29 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-26 2:03 [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule Jiale Song
2021-10-26 2:03 ` [dts] [PATCH V3 2/2] tests/iavf_fdir: create rules with less consumption of TCAM rule in suite Jiale Song
2021-10-26 5:15 ` [dts] [PATCH V3 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule Tu, Lijuan
2021-10-27 1:29 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).