From: Jiale Song <songx.jiale@intel.com>
To: dts@dpdk.org
Cc: Jiale Song <songx.jiale@intel.com>
Subject: [dts] [PATCH V2 02/10] tests/cvl_qinq: update case code for driver change
Date: Tue, 2 Nov 2021 16:11:52 +0800 [thread overview]
Message-ID: <1635840720-90878-2-git-send-email-songx.jiale@intel.com> (raw)
In-Reply-To: <1635840720-90878-1-git-send-email-songx.jiale@intel.com>
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
test_plans/cvl_qinq_test_plan.rst | 14 +++++++-------
tests/TestSuite_cvl_qinq.py | 27 +++++++++++++++++++--------
2 files changed, 26 insertions(+), 15 deletions(-)
diff --git a/test_plans/cvl_qinq_test_plan.rst b/test_plans/cvl_qinq_test_plan.rst
index 4f44150b..22efd705 100644
--- a/test_plans/cvl_qinq_test_plan.rst
+++ b/test_plans/cvl_qinq_test_plan.rst
@@ -71,9 +71,9 @@ Prerequisites
0000:18:00.0 'Device 159b' if=ens785f0 drv=ice unused=vfio-pci
0000:18:00.1 'Device 159b' if=ens785f1 drv=ice unused=vfio-pci
-6. Enable vlan prune flag::
+6. Disable vlan prune flag::
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable on
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning off
7. Generate 4 VFs on PF0(not all the VFs are used)::
@@ -130,7 +130,7 @@ Prerequisites
13. For AVF QinQ test cases(10-14), recreate Generate 1 VFs on PF0, reconfig the VF then launch testpmd::
echo 0 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable off
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning on
echo 1 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
ip link set ens785f0 vf 0 mac 00:11:22:33:44:11
ip link set dev ens785f0 vf 0 spoofchk off
@@ -906,9 +906,9 @@ Test case 08: vlan insertion when pvid enable
Test case 09: vlan filter when pvid enable
==========================================
-1. reset test environment, create vfs and disable vlan prune flag::
+1. reset test environment, create vfs and enable vlan prune flag::
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable off
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning on
2. repeat Prerequisites steps from 7 to 12
@@ -1113,10 +1113,10 @@ Test case 11: Enable/Disable IAVF VLAN header stripping
Test case 12: Enable/Disable IAVF VLAN header insertion
=======================================================
-1. enable vf-vlan-prune-disable flag::
+1. disable vf-vlan-pruning flag::
echo 0 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable on
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning off
2. set up test environment again::
diff --git a/tests/TestSuite_cvl_qinq.py b/tests/TestSuite_cvl_qinq.py
index 39d590f6..a23aeeb3 100644
--- a/tests/TestSuite_cvl_qinq.py
+++ b/tests/TestSuite_cvl_qinq.py
@@ -240,6 +240,9 @@ class TestCvlQinq(TestCase):
self.pf_interface = self.dut.ports_info[self.dut_ports[0]]['intf']
port = self.dut.ports_info[0]['port']
port.bind_driver()
+ # get priv-flags default stats
+ self.flag = 'vf-vlan-pruning'
+ self.default_stats = self.dut.get_priv_flags_state(self.pf_interface, self.flag)
self.vf_flag = False
self.vf0_mac = ''
@@ -255,7 +258,8 @@ class TestCvlQinq(TestCase):
Run before each test case.
'''
self.pci_list = []
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable on' % self.pf_interface, "#")
+ if self.default_stats:
+ self.dut.send_expect('ethtool --set-priv-flags %s %s %s' % (self.pf_interface,self.flag, self.default_stats), "# ")
def setup_pf_vfs_env(self, vfs_num=4):
@@ -646,7 +650,8 @@ class TestCvlQinq(TestCase):
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
pkt_list2 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ if self.default_stats:
+ self.dut.send_expect('ethtool --set-priv-flags %s %s on' % (self.pf_interface, self.flag), '# ')
self.setup_pf_vfs_env()
self.launch_testpmd(dcf_param=True)
self.pmd_output.execute_cmd("vlan set filter on 1")
@@ -679,7 +684,8 @@ class TestCvlQinq(TestCase):
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
pkt_list2 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ if self.default_stats:
+ self.dut.send_expect('ethtool --set-priv-flags %s %s on' % (self.pf_interface, self.flag), '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("vlan set filter on 0")
@@ -712,7 +718,8 @@ class TestCvlQinq(TestCase):
"""
pkt_list = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ if self.default_stats:
+ self.dut.send_expect('ethtool --set-priv-flags %s %s on' % (self.pf_interface, self.flag), '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("vlan set filter on 0")
@@ -746,7 +753,8 @@ class TestCvlQinq(TestCase):
out_vlan = 1
pkt_list = ['Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable on' % self.pf_interface, '#')
+ if self.default_stats:
+ self.dut.send_expect('ethtool --set-priv-flags %s %s off' % (self.pf_interface, self.flag), '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("stop")
@@ -789,7 +797,8 @@ class TestCvlQinq(TestCase):
"""
param = '--rxq=16 --txq=16 --disable-crc-strip'
pkt = 'Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ if self.default_stats:
+ self.dut.send_expect('ethtool --set-priv-flags %s %s on' % (self.pf_interface, self.flag), '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.pmd_output.start_testpmd(cores='1S/4C/1T', param=param, ports=self.pci_list, socket=self.ports_socket)
self.pmd_output.execute_cmd("set fwd mac")
@@ -821,7 +830,8 @@ class TestCvlQinq(TestCase):
AVF CRC strip and Vlan strip co-exists
"""
pkt = 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, "#")
+ if self.default_stats:
+ self.dut.send_expect('ethtool --set-priv-flags %s %s on' % (self.pf_interface, self.flag), '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.check_vlan_offload(vlan_type="strip", stats="off")
@@ -875,4 +885,5 @@ class TestCvlQinq(TestCase):
self.destroy_iavf()
def tear_down_all(self):
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
\ No newline at end of file
+ if self.default_stats:
+ self.dut.send_expect('ethtool --set-priv-flags %s %s %s' % (self.pf_interface, self.flag, self.default_stats), "# ")
--
2.17.1
next prev parent reply other threads:[~2021-11-02 8:12 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-02 8:11 [dts] [PATCH V2 01/10] tests/cvl_dcf_flow_priority: " Jiale Song
2021-11-02 8:11 ` Jiale Song [this message]
2021-11-02 8:11 ` [dts] [PATCH V2 03/10] tests/cvl_advanced_iavf_rss_vlan_esp_ah_l2tp_pfcp: " Jiale Song
2021-11-02 8:11 ` [dts] [PATCH V2 04/10] tests/cvl_dcf_switch_filter: " Jiale Song
2021-11-02 8:11 ` [dts] [PATCH V2 05/10] tests/cvl_dcf_switch_filter_pppoe: " Jiale Song
2021-11-02 8:11 ` [dts] [PATCH V2 06/10] tests/cvl_vf_support_multicast_address: " Jiale Song
2021-11-02 8:11 ` [dts] [PATCH V2 07/10] tests/l2tp_esp_coverage: " Jiale Song
2021-11-02 8:11 ` [dts] [PATCH V2 08/10] tests/kernelpf_iavf: " Jiale Song
2021-11-02 8:11 ` [dts] [PATCH V2 09/10] tests/iavf_flexible_descriptor: " Jiale Song
2021-11-02 8:12 ` [dts] [PATCH V2 10/10] tests/vf_vlan: " Jiale Song
2021-11-05 11:51 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1635840720-90878-2-git-send-email-songx.jiale@intel.com \
--to=songx.jiale@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).