From: Yu Jiang <yux.jiang@intel.com>
To: lijuan.tu@intel.com, dts@dpdk.org
Cc: Yu Jiang <yux.jiang@intel.com>
Subject: [dts][PATCH V1 1/1] test_plans/unit_tests_*: fix dpdk app/examples name to adapt meson build
Date: Fri, 10 Dec 2021 17:50:47 +0800 [thread overview]
Message-ID: <1639129847-6928-1-git-send-email-yux.jiang@intel.com> (raw)
fix dpdk app/examples name to adapt meson build
Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
test_plans/unit_tests_cmdline_test_plan.rst | 8 ++-
test_plans/unit_tests_crc_test_plan.rst | 10 ++--
test_plans/unit_tests_dump_test_plan.rst | 72 ++++++++++++++++++-------
test_plans/unit_tests_event_timer_test_plan.rst | 8 ++-
test_plans/unit_tests_kni_test_plan.rst | 15 ++++--
test_plans/unit_tests_loopback_test_plan.rst | 4 +-
test_plans/unit_tests_lpm_test_plan.rst | 32 ++++++++---
test_plans/unit_tests_power_test_plan.rst | 16 ++++--
test_plans/unit_tests_qos_test_plan.rst | 24 ++++++---
test_plans/unit_tests_ring_test_plan.rst | 8 ++-
test_plans/unit_tests_ringpmd_test_plan.rst | 8 ++-
11 files changed, 151 insertions(+), 54 deletions(-)
diff --git a/test_plans/unit_tests_cmdline_test_plan.rst b/test_plans/unit_tests_cmdline_test_plan.rst
index d6c11fb..196a5f9 100644
--- a/test_plans/unit_tests_cmdline_test_plan.rst
+++ b/test_plans/unit_tests_cmdline_test_plan.rst
@@ -46,8 +46,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> cmdline_autotest
The final output of the test has to be "Test OK"
diff --git a/test_plans/unit_tests_crc_test_plan.rst b/test_plans/unit_tests_crc_test_plan.rst
index 9a4c89e..c6c757c 100644
--- a/test_plans/unit_tests_crc_test_plan.rst
+++ b/test_plans/unit_tests_crc_test_plan.rst
@@ -50,10 +50,12 @@ the application and checks the results. A test report is displayed on
stdout.
The steps to run the unit test manually are as follow::
- # cd ~/dpdk
- # make config T=x86_64-native-linuxapp-gcc
- # make test
- # ./build/build/test/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> crc_autotest
The final output of the test will have to be "Test OK".
diff --git a/test_plans/unit_tests_dump_test_plan.rst b/test_plans/unit_tests_dump_test_plan.rst
index c8832ff..a1a8ed2 100644
--- a/test_plans/unit_tests_dump_test_plan.rst
+++ b/test_plans/unit_tests_dump_test_plan.rst
@@ -47,8 +47,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> dump_ring
The final output of the test will be detailed elements of DPDK ring.
@@ -76,8 +80,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> dump_mempool
The final output of the test will be detailed elements of DPDK mempool.
@@ -105,8 +113,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> dump_physmem
The final output of the test will be detailed elements of DPDK physical memory.
@@ -128,8 +140,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> dump_memzone
The final output of the test will be detailed elements of DPDK memzone.
@@ -151,8 +167,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> dump_struct_sizes
The final output of the test will be the size of DPDK structure.
@@ -174,8 +194,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff -a|-b pci_address
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff -a|-b pci_address
RTE>> dump_devargs
The final output of the test will be the pci address of allow list
@@ -198,8 +222,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> dump_malloc_stats
The final output of the test will be the malloc stats of DPDK heap.
@@ -221,8 +249,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> dump_malloc_heaps
The final output of the test will be the detailed malloc status of each DPDK heap.
@@ -244,8 +276,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> dump_log_types
The final output of the test will be the log level of each DPDK log type.
diff --git a/test_plans/unit_tests_event_timer_test_plan.rst b/test_plans/unit_tests_event_timer_test_plan.rst
index 192d983..0e8a993 100644
--- a/test_plans/unit_tests_event_timer_test_plan.rst
+++ b/test_plans/unit_tests_event_timer_test_plan.rst
@@ -11,8 +11,12 @@ test can be launched independently using the command line interface.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff -a <timerdev-pci-bus-id>,<devargs>
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff -a <timerdev-pci-bus-id>,<devargs>
RTE>> event_timer_adapter_test
The final output of the test has to be "Test OK"
diff --git a/test_plans/unit_tests_kni_test_plan.rst b/test_plans/unit_tests_kni_test_plan.rst
index 793dd47..984d4ad 100644
--- a/test_plans/unit_tests_kni_test_plan.rst
+++ b/test_plans/unit_tests_kni_test_plan.rst
@@ -47,14 +47,21 @@ stdout.
Case config::
- For enable KNI features, need to set the "CONFIG_RTE_KNI_KMOD=y" in ./config/common_base and re-build DPDK.
+ For enable KNI features, need to add "-Denable_kmods=True" when build DPDK by meson.
+ CC=gcc meson -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ rte_kni.ko is located at ./x86_64-native-linuxapp-gcc/kernel/linux/kni/
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
+ # mkdir -p x86_64-native-linuxapp-gcc/kmod
+ # cp ./x86_64-native-linuxapp-gcc/kernel/linux/kni/rte_kni.ko x86_64-native-linuxapp-gcc/kmod/
+ # cp ./x86_64-native-linuxapp-gcc/kernel/linux/igb_uio/igb_uio.ko x86_64-native-linuxapp-gcc/kmod/
+ # lsmod | grep rte_kni
# insmod ./<TARGET>/kmod/igb_uio.ko
- # insmod ./<TARGET>/kmod/rte_kni.ko
- # ./app/test/test -n 1 -c ffff
+ # insmod ./<TARGET>/kmod/rte_kni.ko lo_mode=lo_mode_fifo
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> kni_autotest
RTE>> quit
# rmmod rte_kni
diff --git a/test_plans/unit_tests_loopback_test_plan.rst b/test_plans/unit_tests_loopback_test_plan.rst
index 6e39457..2425141 100644
--- a/test_plans/unit_tests_loopback_test_plan.rst
+++ b/test_plans/unit_tests_loopback_test_plan.rst
@@ -64,7 +64,7 @@ Set::
Then make test
Start test::
- ./test/test/test -c f -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -c f -n 4 -- -i
RTE>>pmd_perf_autotest
The final output of the test will be matrix of average cycles of IO used per
@@ -83,7 +83,7 @@ Set::
Then make test
Start test::
- ./test/test/test -c f -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -c f -n 4 -- -i
RTE>>pmd_perf_autotest
There is not "Test OK" presented.
diff --git a/test_plans/unit_tests_lpm_test_plan.rst b/test_plans/unit_tests_lpm_test_plan.rst
index 4fa9248..0bc5f61 100644
--- a/test_plans/unit_tests_lpm_test_plan.rst
+++ b/test_plans/unit_tests_lpm_test_plan.rst
@@ -47,8 +47,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> lpm_autotest
@@ -71,8 +75,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> lpm6_autotest
@@ -86,8 +94,12 @@ Unit Tests: LPM_perf
This section explains how to run the unit tests for LPM performance.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> lpm_perf_autotest
The final output of the test has to be "Test OK"
@@ -100,8 +112,12 @@ Unit Tests: LPM_ipv6_perf
This section explains how to run the unit tests for LPM IPv6
performance. The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> lpm6_perf_autotest
The final output of the test has to be "Test OK"
diff --git a/test_plans/unit_tests_power_test_plan.rst b/test_plans/unit_tests_power_test_plan.rst
index 813ffde..711dcb8 100644
--- a/test_plans/unit_tests_power_test_plan.rst
+++ b/test_plans/unit_tests_power_test_plan.rst
@@ -51,8 +51,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> power_autotest
@@ -72,8 +76,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> power_acpi_cpufreq_autotest
The final output of the test has to be "Test OK"
diff --git a/test_plans/unit_tests_qos_test_plan.rst b/test_plans/unit_tests_qos_test_plan.rst
index e305cd7..68ae2c5 100644
--- a/test_plans/unit_tests_qos_test_plan.rst
+++ b/test_plans/unit_tests_qos_test_plan.rst
@@ -47,8 +47,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> red_autotest
The final output of the test has to be "Test OK"
@@ -70,8 +74,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> meter_autotest
The final output of the test has to be "Test OK"
@@ -93,8 +101,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> sched_autotest
The final output of the test has to be "Test OK"
diff --git a/test_plans/unit_tests_ring_test_plan.rst b/test_plans/unit_tests_ring_test_plan.rst
index 587bb6a..e5aa5ad 100644
--- a/test_plans/unit_tests_ring_test_plan.rst
+++ b/test_plans/unit_tests_ring_test_plan.rst
@@ -115,8 +115,12 @@ stdout.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff
RTE>> ring_perf_autotest
diff --git a/test_plans/unit_tests_ringpmd_test_plan.rst b/test_plans/unit_tests_ringpmd_test_plan.rst
index cd861e0..159d28f 100644
--- a/test_plans/unit_tests_ringpmd_test_plan.rst
+++ b/test_plans/unit_tests_ringpmd_test_plan.rst
@@ -51,8 +51,12 @@ virtual ethernet devices with full rx&tx functions.
The steps to run the unit test manually are as follow::
- # make -C ./app/test/
- # ./app/test/test -n 1 -c ffff --vdev='net_ring0'
+ Build dpdk
+ # cd dpdk
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 50
+
+ # ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -n 1 -c ffff --vdev='net_ring0'
--vdev='net_ring1'
RTE>> ring_pmd_autotest
--
2.7.4
next reply other threads:[~2021-12-10 9:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-10 9:50 Yu Jiang [this message]
2021-12-16 11:15 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1639129847-6928-1-git-send-email-yux.jiang@intel.com \
--to=yux.jiang@intel.com \
--cc=dts@dpdk.org \
--cc=lijuan.tu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).