* [dts][PATCH V1] test_plans/cvl_pf_qinq_switch_filter: cvl support l4
@ 2021-12-21 16:58 Yaqi Tang
2022-01-04 8:27 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yaqi Tang @ 2021-12-21 16:58 UTC (permalink / raw)
To: dts; +Cc: Yaqi Tang
CVL support l4 for QinQ switch filter in PF driver is by dst MAC + outer VLAN id + inner VLAN id + dst IP + dst port, and port can support as eth / vlan / vlan / IP / tcp|udp.
Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
Tested-by: Yaqi Tang < yaqi.tang@intel.com>
---
.../cvl_pf_qinq_switch_filter_test_plan.rst | 687 ++++++++++++++++++
1 file changed, 687 insertions(+)
create mode 100644 test_plans/cvl_pf_qinq_switch_filter_test_plan.rst
diff --git a/test_plans/cvl_pf_qinq_switch_filter_test_plan.rst b/test_plans/cvl_pf_qinq_switch_filter_test_plan.rst
new file mode 100644
index 00000000..ccd431e6
--- /dev/null
+++ b/test_plans/cvl_pf_qinq_switch_filter_test_plan.rst
@@ -0,0 +1,687 @@
+.. Copyright (c) <2021>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===================================
+CVL PF QINQ Switch Filter Test Plan
+===================================
+
+Description
+===========
+The test plan includes six test cases, such as MAC_QINQ_IPV4, MAC_QINQ_IPV6, MAC_QINQ_IPV4_UDP, MAC_QINQ_IPV4_TCP, MAC_QINQ_IPV6_UDP, MAC_QINQ_IPV6_TCP.
+* Enable QINQ switch filter for IPv4/IPv6, IPv4 + TCP/UDP in non-pipeline mode.
+* Enable QINQ switch filter for IPv6 + TCP/UDP in pipeline mode.
+CVL support l4 for QinQ switch filter in PF driver is by dst MAC + outer VLAN id + inner VLAN id + dst IP + dst port, and port can support as eth / vlan / vlan / IP / tcp|udp.
+
+Prerequisites
+=============
+
+Hardware
+--------
+Supportted NICs: columbiaville_25g/columbiaville_100g
+
+Software
+--------
+dpdk: http://dpdk.org/git/dpdk
+scapy: http://www.secdev.org/projects/scapy/
+
+General Set Up
+--------------
+1. Copy specific ice package to /lib/firmware/updates/intel/ice/ddp/ice.pkg,
+ then load driver::
+
+ # cp ice_comms-1.3.31.0.pkg /lib/firmware/updates/intel/ice/ddp/ice.pkg
+ # rmmod ice
+ # insmod ice.ko
+
+2. Compile DPDK::
+
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 110
+
+3. Get the pci device id and interface of DUT and tester::
+
+ # ./usertools/dpdk-devbind.py -s
+
+ 0000:3b:00.0 'Ethernet Controller E810-C for SFP 1593' if=ens785f0 drv=ice unused=vfio-pci
+ 0000:af:00.0 'Ethernet Controller XXV710 for 25GbE SFP28 158b' if=ens260f0 drv=i40e unused=vfio-pci
+
+4. Bind the DUT port to dpdk::
+
+ # ./usertools/dpdk-devbind.py -b vfio-pci 0000:3b:00.0
+
+Test Case
+=========
+
+Common Steps
+------------
+1. Launch the userland ``testpmd`` application on DUT as follows::
+
+ # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:3b:00.0 -- -i --txq=16 --rxq=16
+
+2. Set verbose::
+
+ testpmd> set verbose 1
+
+3. Set fwd engine and start::
+
+ testpmd> set fwd rxonly
+ testpmd> start
+
+#Non-pipeline mode
+
+Test Case 1: MAC_QINQ_IPV4
+--------------------------
+The test case enable QINQ switch filter for IPv4 in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV4 => QUEUE
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 2: received 1 packets
+ src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 - nb_segs=1 - RSS hash=0x26878aad - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0x2
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 13: received 1 packets
+ src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:33 - type=0x8100 - length=122 - nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0xd
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 13: received 1 packets
+ src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 - nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0xd
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 13: received 1 packets
+ src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 - nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0xd
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.3", dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 10: received 1 packets
+ src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 - nb_segs=1 - RSS hash=0xc99a75ba - RSS queue=0xa - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0xa
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+Test Case 2: MAC_QINQ_IPV6
+--------------------------
+The test case enable QINQ switch filter for IPv6 in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions rss queues 2 3 end / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions rss queues 2 3 end / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV6 => RSS
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 2: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0x2
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 12: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0xc
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 12: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0xc
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 12: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0xc
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 6: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0x63517896 - RSS queue=0x6 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0x6
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+Test Case 3: MAC_QINQ_IPV4_UDP
+------------------------------
+The test case enable QINQ switch filter for IPv4 + UDP in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + UDP.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions queue index 2 / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions queue index 2 / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV4 UDP => QUEUE
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 2: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x2
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 3: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=130 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 3: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 3: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=22)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 3: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+Test Case 4: MAC_QINQ_IPV4_TCP
+------------------------------
+The test case enable QINQ switch filter for IPv4 + TCP in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + TCP.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions rss queues 4 5 end / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions rss queues 4 5 end / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV4 TCP => RSS
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 5: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x5 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x5
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 3: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 3: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 3: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=22)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 3: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+#Pipeline mode
+
+Test Case 5: MAC_QINQ_IPV6_UDP
+------------------------------
+The test case enable QINQ switch filter for IPv6 + UDP in pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + UDP.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end actions drop / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end actions drop / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV6 UDP => DROP
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd>
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 15: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=150 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 15: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=150 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 15: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=150 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=22)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 15: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=150 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+Test Case 6: MAC_QINQ_IPV6_TCP
+------------------------------
+The test case enable QINQ switch filter for IPv6 + TCP in pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + TCP.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end actions queue index 7 / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end actions queue index 7 / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV6 TCP => QUEUE
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 7: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0x7 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0x7
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right::
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 15: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=162 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 15: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 15: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+Tester::
+
+ >>> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=22)/("X"*80)],iface="ens260f0",count=1)
+
+DUT::
+
+ testpmd> port 0/queue 15: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
--
2.25.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: [dts][PATCH V1] test_plans/cvl_pf_qinq_switch_filter: cvl support l4
2021-12-21 16:58 [dts][PATCH V1] test_plans/cvl_pf_qinq_switch_filter: cvl support l4 Yaqi Tang
@ 2022-01-04 8:27 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2022-01-04 8:27 UTC (permalink / raw)
To: Tang, Yaqi, dts; +Cc: Tang, Yaqi
> -----Original Message-----
> From: Yaqi Tang <yaqi.tang@intel.com>
> Sent: 2021年12月22日 0:58
> To: dts@dpdk.org
> Cc: Tang, Yaqi <yaqi.tang@intel.com>
> Subject: [dts][PATCH V1] test_plans/cvl_pf_qinq_switch_filter: cvl support l4
>
> CVL support l4 for QinQ switch filter in PF driver is by dst MAC + outer VLAN id +
> inner VLAN id + dst IP + dst port, and port can support as eth / vlan / vlan / IP /
> tcp|udp.
>
> Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
> Tested-by: Yaqi Tang < yaqi.tang@intel.com>
> ---
> .../cvl_pf_qinq_switch_filter_test_plan.rst | 687 ++++++++++++++++++
The file name is prefered to follow tradition: cvl_swith_filter_qinq_test_plan.rst
> 1 file changed, 687 insertions(+)
> create mode 100644 test_plans/cvl_pf_qinq_switch_filter_test_plan.rst
>
> diff --git a/test_plans/cvl_pf_qinq_switch_filter_test_plan.rst
> b/test_plans/cvl_pf_qinq_switch_filter_test_plan.rst
> new file mode 100644
> index 00000000..ccd431e6
> --- /dev/null
> +++ b/test_plans/cvl_pf_qinq_switch_filter_test_plan.rst
> @@ -0,0 +1,687 @@
> +.. Copyright (c) <2021>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +===================================
> +CVL PF QINQ Switch Filter Test Plan
> +===================================
> +
> +Description
> +===========
> +The test plan includes six test cases, such as MAC_QINQ_IPV4,
> MAC_QINQ_IPV6, MAC_QINQ_IPV4_UDP, MAC_QINQ_IPV4_TCP,
> MAC_QINQ_IPV6_UDP, MAC_QINQ_IPV6_TCP.
> +* Enable QINQ switch filter for IPv4/IPv6, IPv4 + TCP/UDP in non-pipeline mode.
> +* Enable QINQ switch filter for IPv6 + TCP/UDP in pipeline mode.
> +CVL support l4 for QinQ switch filter in PF driver is by dst MAC + outer VLAN id +
> inner VLAN id + dst IP + dst port, and port can support as eth / vlan / vlan / IP /
> tcp|udp.
> +
> +Prerequisites
> +=============
> +
> +Hardware
> +--------
> +Supportted NICs: columbiaville_25g/columbiaville_100g
> +
> +Software
> +--------
> +dpdk: http://dpdk.org/git/dpdk
> +scapy: http://www.secdev.org/projects/scapy/
> +
> +General Set Up
> +--------------
> +1. Copy specific ice package to /lib/firmware/updates/intel/ice/ddp/ice.pkg,
> + then load driver::
> +
> + # cp ice_comms-1.3.31.0.pkg /lib/firmware/updates/intel/ice/ddp/ice.pkg
> + # rmmod ice
> + # insmod ice.ko
It says " specific ice package ", what's the requirements? Must it be " ice_comms-1.3.31.0.pkg " ? I think other should be OK.
> +
> +2. Compile DPDK::
> +
> + # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-
> library=static x86_64-native-linuxapp-gcc
> + # ninja -C x86_64-native-linuxapp-gcc -j 110
> +
> +3. Get the pci device id and interface of DUT and tester::
> +
> + # ./usertools/dpdk-devbind.py -s
> +
> + 0000:3b:00.0 'Ethernet Controller E810-C for SFP 1593' if=ens785f0 drv=ice
> unused=vfio-pci
> + 0000:af:00.0 'Ethernet Controller XXV710 for 25GbE SFP28 158b' if=ens260f0
> drv=i40e unused=vfio-pci
> +
> +4. Bind the DUT port to dpdk::
> +
> + # ./usertools/dpdk-devbind.py -b vfio-pci 0000:3b:00.0
> +
> +Test Case
> +=========
> +
> +Common Steps
> +------------
> +1. Launch the userland ``testpmd`` application on DUT as follows::
> +
> + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a
> 0000:3b:00.0 -- -i --txq=16 --rxq=16
> +
> +2. Set verbose::
> +
> + testpmd> set verbose 1
> +
> +3. Set fwd engine and start::
> +
> + testpmd> set fwd rxonly
> + testpmd> start
> +
> +#Non-pipeline mode
Is it comment or note ?
> +
> +Test Case 1: MAC_QINQ_IPV4
> +--------------------------
> +The test case enable QINQ switch filter for IPv4 in non-pipeline mode, and port
> can support as dst MAC + outer VLAN id + inner VLAN id + IPv4.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan
> tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions
> queue index 2 / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci
> is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue
> index 2 / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV4 => QUEUE
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1",
> dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 2: received 1 packets
> + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 -
> nb_segs=1 - RSS hash=0x26878aad - RSS queue=0x2 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=20 - Receive queue=0x2
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right::
How to tell the action is not right or right ?
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1",
> dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 13: received 1 packets
> + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:33 - type=0x8100 - length=122 -
> nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=20 - Receive queue=0xd
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1",
> dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 13: received 1 packets
> + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 -
> nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=20 - Receive queue=0xd
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x2,type=0x0800)/IP(src="192.168.1.1",
> dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 13: received 1 packets
> + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 -
> nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=20 - Receive queue=0xd
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.3",
> dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 10: received 1 packets
> + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 -
> nb_segs=1 - RSS hash=0xc99a75ba - RSS queue=0xa - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=20 - Receive queue=0xa
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +Test Case 2: MAC_QINQ_IPV6
> +--------------------------
> +The test case enable QINQ switch filter for IPv6 in non-pipeline mode, and port
> can support as dst MAC + outer VLAN id + inner VLAN id + IPv6.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan
> tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 /
> end actions rss queues 2 3 end / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci
> is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end
> actions rss queues 2 3 end / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV6 => RSS
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 2: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0x2 - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=40 - Receive queue=0x2
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 12: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=40 - Receive queue=0xc
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 12: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=40 - Receive queue=0xc
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 12: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=40 - Receive queue=0xc
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2023")/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 6: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0x63517896 - RSS queue=0x6 - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=40 - Receive queue=0x6
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +Test Case 3: MAC_QINQ_IPV4_UDP
> +------------------------------
> +The test case enable QINQ switch filter for IPv4 + UDP in non-pipeline mode,
> and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + UDP.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan
> tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions queue index 2 /
> end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci
> is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions queue index 2 / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV4 UDP => QUEUE
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],iface="
> ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 2: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x2 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x2
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],iface="
> ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 3: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=130 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],iface="
> ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 3: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x2,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],iface="
> ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 3: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=22)/("X"*80)],iface="
> ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 3: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +Test Case 4: MAC_QINQ_IPV4_TCP
> +------------------------------
> +The test case enable QINQ switch filter for IPv4 + TCP in non-pipeline mode,
> and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + TCP.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan
> tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions rss queues 4 5 end
> / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci
> is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions rss queues 4 5 end /
> end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV4 TCP => RSS
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],iface="e
> ns260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 5: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x5 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x5
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],iface="e
> ns260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 3: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],iface="e
> ns260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 3: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x2,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],iface="e
> ns260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 3: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=22)/("X"*80)],iface="e
> ns260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 3: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +#Pipeline mode
> +
> +Test Case 5: MAC_QINQ_IPV6_UDP
> +------------------------------
> +The test case enable QINQ switch filter for IPv6 + UDP in pipeline mode, and
> port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + UDP.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 priority 0 ingress pattern eth dst is
> 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end
> actions drop / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55
> / vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end
> actions drop / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV6 UDP => DROP
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd>
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 15: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=150 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 15: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=150 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 15: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=150 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/UDP(sport=50,dport=22)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 15: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=150 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +Test Case 6: MAC_QINQ_IPV6_TCP
> +------------------------------
> +The test case enable QINQ switch filter for IPv6 + TCP in pipeline mode, and
> port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + TCP.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 priority 0 ingress pattern eth dst is
> 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end
> actions queue index 7 / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55
> / vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end
> actions queue index 7 / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV6 TCP => QUEUE
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 7: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0x7 - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0x7
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right::
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 15: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 - length=162 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 15: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 15: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +Tester::
> +
> + >>>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100
> )/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3
> 900:2020")/TCP(sport=50,dport=22)/("X"*80)],iface="ens260f0",count=1)
> +
> +DUT::
> +
> + testpmd> port 0/queue 15: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> --
> 2.25.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-01-04 8:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-21 16:58 [dts][PATCH V1] test_plans/cvl_pf_qinq_switch_filter: cvl support l4 Yaqi Tang
2022-01-04 8:27 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).