* [dts] [PATCH V3 0/2] [examples/flow_classify]: upload test plan
@ 2019-06-18 7:15 Mo, YufengX
2019-06-18 7:15 ` [dts] [PATCH V3 1/2] " Mo, YufengX
2019-06-18 7:15 ` [dts] [PATCH V3 2/2] [examples/flow_classify]: add flow_classify_test_plan label Mo, YufengX
0 siblings, 2 replies; 4+ messages in thread
From: Mo, YufengX @ 2019-06-18 7:15 UTC (permalink / raw)
To: dts; +Cc: yufengmx
From: yufengmx <yufengx.mo@intel.com>
upload examples/flow_classify test plan
update test plan index list
v3:
- Follow Lin Xueqin suggestion
- *.remove burst packet type limitation
- *.add functional test case support
- *.remove ixia command description
yufengmx (2):
[examples/flow_classify]: upload test plan
[examples/flow_classify]: add flow_classify_test_plan label
test_plans/flow_classify_test_plan.rst | 268 +++++++++++++++++++++++++++++++++
test_plans/index.rst | 22 +++
2 files changed, 290 insertions(+)
create mode 100644 test_plans/flow_classify_test_plan.rst
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V3 1/2] [examples/flow_classify]: upload test plan
2019-06-18 7:15 [dts] [PATCH V3 0/2] [examples/flow_classify]: upload test plan Mo, YufengX
@ 2019-06-18 7:15 ` Mo, YufengX
2019-06-18 7:15 ` [dts] [PATCH V3 2/2] [examples/flow_classify]: add flow_classify_test_plan label Mo, YufengX
1 sibling, 0 replies; 4+ messages in thread
From: Mo, YufengX @ 2019-06-18 7:15 UTC (permalink / raw)
To: dts; +Cc: yufengmx
From: yufengmx <yufengx.mo@intel.com>
This test plan is for flow classify feature.
flow_classify is the tool to call flow_classify lib for group of packets,
just after receiving them or before transmitting them.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
test_plans/flow_classify_test_plan.rst | 268 +++++++++++++++++++++++++++++++++
1 file changed, 268 insertions(+)
create mode 100644 test_plans/flow_classify_test_plan.rst
diff --git a/test_plans/flow_classify_test_plan.rst b/test_plans/flow_classify_test_plan.rst
new file mode 100644
index 0000000..4432ef9
--- /dev/null
+++ b/test_plans/flow_classify_test_plan.rst
@@ -0,0 +1,268 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=============
+flow classify
+=============
+
+This document provides test plan for flow classify feature.
+
+Flow Classify provides flow record information with some measured properties.
+
+DPDK provides a Flow Classification library that provides the ability
+to classify an input packet by matching it against a set of Flow rules.
+The implementation supports counting of IPv4 5-tuple packets which match a
+particular Flow rule only.
+
+example/flow_classify is the tool to call flow_classify lib for group of packets,
+just after receiving them or before transmitting them. It is intended as a
+demonstration of the basic components of a DPDK forwarding application which uses
+the Flow Classify library API's.
+
+DPDK technical doc refer to::
+
+ dpdk/doc/guides/sample_app_ug/flow_classify.rst
+ dpdk/doc/guides/prog_guide/flow_classify_lib.rst
+
+Prerequisites
+-------------
+2xNICs (2 full duplex optical ports per NIC)
+Flow Classify should run on 2 pair link peer at least.
+No nic type limitation.
+
+HW configuration
+----------------
+link peer topology::
+
+ Tester DUT
+ .-------. .-------.
+ | port0 | <------------------> | port0 |
+ | port1 | <------------------> | port1 |
+ '-------' '-------'
+
+Stream configuration
+--------------------
+five valid streams(as examples/flow_classify/ipv4_rules_file.txt), three invalid streams::
+
+ UDP_1:
+ Frame Data/Protocols: Ethernet 2 0800, IPv4,UDP/IP, Fixed 64.
+ IPv4 Header Page: Dest Address: 2.2.2.7 Src Address: 2.2.2.3
+ UDP Header: Src Port: 32 Dest Port: 33
+
+ UDP_2:
+ Frame Data/Protocols: Ethernet 2 0800, IPv4,UDP/IP, Fixed 64.
+ IPv4 Header Page: Dest Address: 9.9.9.7 Src Address: 9.9.9.3
+ UDP Header: Src Port: 32 Dest Port: 33
+
+ UDP_invalid:
+ Frame Data/Protocols: Ethernet 2 0800, IPv4,UDP/IP, Fixed 64.
+ IPv4 Header Page: Dest Address: 9.8.7.6 Src Address: 192.168.0.36
+ UDP Header: Src Port: 10 Dest Port: 11
+
+ TCP_1:
+ Frame Data/Protocols: Ethernet 2 0800, IPv4,TCP/IP, Fixed 64.
+ IPv4 Header Page: Dest Address: 9.9.9.7 Src Address: 9.9.9.3
+ TCP Header: Src Port: 32 Dest Port: 33
+
+ TCP_2:
+ Frame Data/Protocols: Ethernet 2 0800, IPv4,TCP/IP, Fixed 64.
+ IPv4 Header Page: Dest Address: 9.9.8.7 Src Address: 9.9.8.3
+ TCP Header: Src Port: 32 Dest Port: 33
+
+ TCP_invalid:
+ Frame Data/Protocols: Ethernet 2 0800, IPv4,TCP/IP, Fixed 64.
+ IPv4 Header Page: Dest Address: 9.8.7.6 Src Address: 192.168.0.36
+ TCP Header: Src Port: 10 Dest Port: 11
+
+ SCTP_1:
+ Frame Data/Protocols: Ethernet 2 0800, IPv4, None, Fixed 256.
+ IPv4 Header Page: Dest Address: 2.3.4.5 Src Address: 6.7.8.9
+ SCTP Header: Src Port: 32 Dest Port: 33
+ Protocol: 132-SCTP
+
+ SCTP_invalid:
+ Frame Data/Protocols: Ethernet 2 0800, IPv4, None, Fixed 256.
+ IPv4 Header Page: Dest Address: 9.8.7.6 Src Address: 192.168.0.36
+ SCTP Header: Src Port: 10 Dest Port: 11
+ Protocol: 132-SCTP
+
+Compilation:
+------------
+steps::
+
+ cd $DPDK_PATH
+ export RTE_TARGET=$DPDK_PATH
+ export RTE_SDK=`pwd`
+ make -C examples/flow_classify
+
+Flow classify bin file under::
+
+ $DPDK_PATH/examples/flow_classify/build/flow_classify
+
+rule config file(default)::
+
+ $DPDK_PATH/examples/flow_classify/ipv4_rules_file.txt
+
+Test cases
+----------
+The idea behind the testing process is to compare packet count sending by
+ixia packet generator with packet count filtered by flow_classify. Valid
+packets should be in flow_classify output and invalid packets should be ignored.
+The rules are configured in a txt file. Testing content includes single
+udp/tcp/sctp stream and multiple streams.
+
+Test Case : check valid rule with udp stream
+============================================
+Send 32 packets of valid stream(as UDP_1 or UDP_2 in Stream configuration),
+then check the total received packets in flow_classify's output message.
+
+steps:
+
+#. boot up flow_classify::
+
+ ./flow_classify -c 4 -n 4 -- --rule_ipv4=<rule config file>
+
+#. send stream by packet generator(scapy or ixia).
+
+#. check flow_classify output contain the following message::
+
+ rule[0] count=1
+ or
+ rule[1] count=1
+
+Test Case : check invalid rule with udp stream
+==============================================
+Send 32 packets of invalid stream(as UDP_invalid in Stream configuration),
+then check flow_classify's output message has no count message
+
+steps:
+
+#. boot up flow_classify::
+
+ ./flow_classify -c 4 -n 4 -- --rule_ipv4=<rule config file>
+
+#. send stream by packet generator(scapy or ixia).
+
+#. check flow_classify output has no message as "rule[xxx] count=xxx", such as::
+
+ rule[0] count=1
+
+Test Case : check valid rule with tcp stream
+============================================
+Send 32 packets of valid stream(as TCP_1 or TCP_2 in Stream configuration),
+then check the total received packets in flow_classify's output message.
+
+steps:
+
+#. boot up flow_classify::
+
+ ./flow_classify -c 4 -n 4 -- --rule_ipv4=<rule config file>
+
+#. send stream by packet generator(scapy or ixia).
+
+#. check flow_classify output contain the following message::
+
+ rule[2] count=1
+ or
+ rule[3] count=1
+
+Test Case : check invalid rule with tcp stream
+==============================================
+Send 32 packets of invalid stream(as TCP_invalid in Stream configuration),
+then check flow_classify's output message has no count message.
+
+steps:
+
+#. boot up flow_classify::
+
+ ./flow_classify -c 4 -n 4 -- --rule_ipv4=<rule config file>
+
+#. send stream by packet generator(scapy or ixia).
+
+#. check flow_classify output has no message as "rule[xxx] count=xxx", such as::
+
+ rule[2] count=1
+
+Test Case : check valid rule with sctp stream
+=============================================
+Send 32 packets of valid stream(as SCTP_1 in Stream configuration),
+then check the total received packets in flow_classify's output message.
+
+steps:
+
+#. boot up flow_classify::
+
+ ./flow_classify -c 4 -n 4 -- --rule_ipv4=<rule config file>
+
+#. send stream by packet generator(scapy or ixia).
+
+#. check flow_classify output contain the following message::
+
+ rule[4] count=1
+
+Test Case : check invalid rule with sctp stream
+===============================================
+Send 32 packets of invalid stream(as SCTP_invalid in Stream configuration),
+then check flow_classify's output message has no count message.
+
+steps:
+
+#. boot up flow_classify::
+
+ ./flow_classify -c 4 -n 4 -- --rule_ipv4=<rule config file>
+
+#. send stream by packet generator(scapy or ixia).
+
+#. check flow_classify output has no "rule[xxx] count=xxx" message, such as::
+
+ rule[4] count=1
+
+Test Case: check valid/invalid rule with mixed streams
+======================================================
+Send mixed streams, 32 packets/each stream type(all stream types in Stream configuration),
+then check if they are filtered/captured by flow_classify.
+
+steps:
+
+#. boot up flow_classify::
+
+ ./flow_classify -c 4 -n 4 -- --rule_ipv4=<rule config file>
+
+#. send mixed stream by packet generator(scapy or ixia).
+
+#. check flow_classify output only contain the following count message::
+
+ rule[0] count=1
+ rule[1] count=1
+ rule[2] count=1
+ rule[3] count=1
+ rule[4] count=1
\ No newline at end of file
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V3 2/2] [examples/flow_classify]: add flow_classify_test_plan label
2019-06-18 7:15 [dts] [PATCH V3 0/2] [examples/flow_classify]: upload test plan Mo, YufengX
2019-06-18 7:15 ` [dts] [PATCH V3 1/2] " Mo, YufengX
@ 2019-06-18 7:15 ` Mo, YufengX
1 sibling, 0 replies; 4+ messages in thread
From: Mo, YufengX @ 2019-06-18 7:15 UTC (permalink / raw)
To: dts; +Cc: yufengmx
From: yufengmx <yufengx.mo@intel.com>
add flow_classify_test_plan label
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
test_plans/index.rst | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/test_plans/index.rst b/test_plans/index.rst
index 712d094..52d4e55 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -130,6 +130,10 @@ The following are the test plans for the DPDK DTS automated test system.
loadbalancer_test_plan
loopback_multi_queues_test_plan
telemetry_test_plan
+ compressdev_isal_pmd_test_plan
+ compressdev_qat_pmd_test_plan
+ compressdev_zlib_pmd_test_plan
+ enable_package_download_in_ice_driver_test_plan
veb_switch_test_plan
vf_daemon_test_plan
@@ -152,6 +156,8 @@ The following are the test plans for the DPDK DTS automated test system.
vhost_user_live_migration_test_plan
vm_power_manager_test_plan
vmdq_test_plan
+ vf_l3fwd_test_plan
+ softnic_test_plan
virtio_1.0_test_plan
vhost_enqueue_interrupt_test_plan
@@ -163,6 +169,21 @@ The following are the test plans for the DPDK DTS automated test system.
virtio_perf_cryptodev_func_test_plan
vm2vm_virtio_net_perf_test_plan
vm2vm_virtio_pmd_test_plan
+ dpdk_gro_lib_test_plan
+ dpdk_gso_lib_test_plan
+ vhost_dequeue_zero_copy_test_plan
+ vxlan_gpe_support_in_i40e_test_plan
+ pvp_diff_qemu_version_test_plan
+ pvp_qemu_zero_copy_test_plan
+ pvp_share_lib_test_plan
+ pvp_vhost_user_built_in_net_driver_test_plan
+ pvp_virtio_user_2M_hugepages_test_plan
+ pvp_virtio_user_multi_queues_test_plan
+ vhost_gro_test_plan
+ virtio_unit_cryptodev_func_test_plan
+ virtio_user_for_container_networking_test_plan
+ eventdev_perf_test_plan
+ eventdev_pipeline_perf_test_plan
unit_tests_cmdline_test_plan
unit_tests_crc_test_plan
@@ -195,3 +216,4 @@ The following are the test plans for the DPDK DTS automated test system.
distributor_test_plan
efd_test_plan
example_build_test_plan
+ flow_classify_test_plan
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V3 0/2] [examples/flow_classify]: upload test plan
@ 2019-06-18 8:59 yufengmx
0 siblings, 0 replies; 4+ messages in thread
From: yufengmx @ 2019-06-18 8:59 UTC (permalink / raw)
To: dts; +Cc: yufengmx
upload examples/flow_classify test plan
update test plan index list
v4:
- fix inaccurate description
v3:
- Follow Lin Xueqin suggestion
- remove burst packet type limitation
- add functional test case support
- remove ixia command description
yufengmx (2):
[examples/flow_classify]: upload test plan
[examples/flow_classify]: add flow_classify_test_plan label
test_plans/flow_classify_test_plan.rst | 268 +++++++++++++++++++++++++++++++++
test_plans/index.rst | 1 +
2 files changed, 269 insertions(+)
create mode 100644 test_plans/flow_classify_test_plan.rst
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-06-18 8:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-18 7:15 [dts] [PATCH V3 0/2] [examples/flow_classify]: upload test plan Mo, YufengX
2019-06-18 7:15 ` [dts] [PATCH V3 1/2] " Mo, YufengX
2019-06-18 7:15 ` [dts] [PATCH V3 2/2] [examples/flow_classify]: add flow_classify_test_plan label Mo, YufengX
2019-06-18 8:59 [dts] [PATCH V3 0/2] [examples/flow_classify]: upload test plan yufengmx
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).