From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: update test plan to verify performance of multi-queues in loopback multi-queues test
Date: Sun, 7 Jul 2019 19:35:23 +0000 [thread overview]
Message-ID: <20190707193523.27983-1-yinan.wang@intel.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 29354 bytes --]
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...ack_multi_paths_port_restart_test_plan.rst | 86 ++--
.../loopback_multi_queues_test_plan.rst | 371 ++++++++++++------
2 files changed, 285 insertions(+), 172 deletions(-)
diff --git a/test_plans/loopback_multi_paths_port_restart_test_plan.rst b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
index 0b9b87a..76aba32 100644
--- a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
+++ b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
@@ -8,7 +8,7 @@
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
+ - Redistributions in binary forim must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
@@ -34,13 +34,8 @@
vhost/virtio loopback with multi-paths and port restart test plan
=================================================================
-Description
-===========
-
-Benchmark vhost/virtio-user loopback test with 8 rx/tx paths.
-Includes mergeable, normal, vector_rx, inorder mergeable,
-inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
-Also cover port restart test with each path.
+Benchmark vhost/virtio-user loopback test with 7 rx/tx paths, includes virtio 1.0 mergeable, normal, vector_rx, inorder mergeable,
+inorder no-mergeable path and virtio 1.1 mergeable, normal path. Also test port restart and only send one packet each time using testpmd.
Test Case 1: loopback test with virtio 1.1 mergeable path
=========================================================
@@ -79,7 +74,8 @@ Test Case 1: loopback test with virtio 1.1 mergeable path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
Test Case 2: loopback test with virtio 1.1 normal path
@@ -119,50 +115,11 @@ Test Case 2: loopback test with virtio 1.1 normal path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
-
-Test Case 3: loopback test with virtio 1.1 inorder path
-=======================================================
-
-1. Launch vhost by below command::
-
- rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
- --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
-
-2. Launch virtio-user by below command::
-
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
- >start
-
-3. Send packets with vhost-testpmd, [frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
- testpmd>set txpkts [frame_size]
- testpmd>start tx_first 32
-
-4. Get throughput 10 times and calculate the average throughput::
-
- testpmd>show port stats all
-
-5. Stop port at vhost side and re-calculate the average throughput, verify the throughput is zero after port stop::
-
- testpmd>stop
- testpmd>port stop 0
- testpmd>show port stats all
-
-6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
-
- testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 4: loopback test with inorder mergeable path
+Test Case 3: loopback test with inorder mergeable path
======================================================
1. Launch vhost by below command::
@@ -199,10 +156,11 @@ Test Case 4: loopback test with inorder mergeable path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 5: loopback test with inorder no-mergeable path
+Test Case 4: loopback test with inorder no-mergeable path
=========================================================
1. Launch vhost by below command::
@@ -239,10 +197,11 @@ Test Case 5: loopback test with inorder no-mergeable path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 6: loopback test with mergeable path
+Test Case 5: loopback test with mergeable path
==============================================
1. Launch vhost by below command::
@@ -279,10 +238,11 @@ Test Case 6: loopback test with mergeable path
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 7: loopback test with normal path
+Test Case 6: loopback test with normal path
===========================================
1. Launch vhost by below command::
@@ -319,10 +279,11 @@ Test Case 7: loopback test with normal path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 8: loopback test with vector_rx path
+Test Case 7: loopback test with vector_rx path
==============================================
1. Launch vhost by below command::
@@ -337,7 +298,7 @@ Test Case 8: loopback test with vector_rx path
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
- -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
@@ -359,5 +320,6 @@ Test Case 8: loopback test with vector_rx path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
+ testpmd>set burst 1
+ testpmd>start tx_first 1
+ testpmd>show port stats all
\ No newline at end of file
diff --git a/test_plans/loopback_multi_queues_test_plan.rst b/test_plans/loopback_multi_queues_test_plan.rst
index 2021c3e..47b4ae9 100644
--- a/test_plans/loopback_multi_queues_test_plan.rst
+++ b/test_plans/loopback_multi_queues_test_plan.rst
@@ -8,7 +8,7 @@
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
+ - Redistributions in binary forim must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
@@ -30,37 +30,33 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
-=====================================================
-vhost/virtio-user loopback with multi-queue test plan
-=====================================================
+======================================================
+vhost/virtio-user loopback with multi-queues test plan
+======================================================
-Description
-===========
+Benchmark vhost/virtio-user loopback multi-queues with different rx/tx paths with virtio 1.0 and virtio 1.1, includes virtio 1.0 mergeable, normal, vector_rx, inorder no-mergeable, inorder mergeable path and virtio 1.1 mergeable, normal path. And virtio-user support 8 queues in maximum, check performance could be linear growth when enable 8 queues and 8 cores, notice cores should in same socket.
-Benchmark vhost/virtio-user loopback multi-queues test with 8 rx/tx paths, virtio-user support 8 queues in maximum.
-Includes mergeable, normal, vector_rx, inorder mergeable,
-inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
+Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8 queues
+===============================================================================
-Test Case 1: loopback 2 queues test with virtio 1.1 mergeable path
-==================================================================
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
- >set fwd mac
- >start
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
@@ -69,62 +65,56 @@ Test Case 1: loopback 2 queues test with virtio 1.1 mergeable path
testpmd>show port stats all
-5. Check each queue's RX/TX packet numbers::
+5. Check each RX/TX queue has packets, then quit testpmd::
testpmd>stop
+ testpmd>quit
-Test Case 2: loopback 2 queues test with virtio 1.1 normal path
-===============================================================
-
-1. Launch testpmd by below command::
+6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+ -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
-2. Launch virtio-user by below command::
+7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
- >set fwd mac
- >start
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+8. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
-4. Get throughput 10 times and calculate the average throughput::
+9. Get throughput 10 times and calculate the average throughput,check the throughput of 8 queues is eight times of 1 queue::
testpmd>show port stats all
-5. Check each queue's RX/TX packet numbers::
-
- testpmd>stop
-
-Test Case 3: loopback 2 queues test with virtio 1.1 inorder path
-================================================================
+Test Case 2: loopback with virtio 1.1 normal path using 1 queue and 8 queues
+============================================================================
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
- >set fwd mac
- >start
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
@@ -135,29 +125,56 @@ Test Case 3: loopback 2 queues test with virtio 1.1 inorder path
testpmd>show port stats all
-5. Check each queue's RX/TX packet numbers::
+5. Check each RX/TX queue has packets, then quit testpmd::
testpmd>stop
+ testpmd>quit
+
+6. Launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+ -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+7. Launch virtio-user by below command::
-Test Case 4: loopback 2 queues test with inorder mergeable path
-===============================================================
+ ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+9. Get throughput 10 times and calculate the average throughput,check the throughput of 8 queues is eight times of 1 queue::
+
+ testpmd>show port stats all
+
+Test Case 3: loopback with virtio 1.0 inorder mergeable path using 1 queue and 8 queues
+=======================================================================================
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
- >set fwd mac
- >start
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
@@ -168,29 +185,56 @@ Test Case 4: loopback 2 queues test with inorder mergeable path
testpmd>show port stats all
-5. Check each queue's RX/TX packet numbers::
+5. Check each RX/TX queue has packets, then quit testpmd::
testpmd>stop
+ testpmd>quit
-Test Case 5: loopback 2 queues test with inorder no-mergeable path
-==================================================================
+6. Launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+ -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+7. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=1,in_order=1 \
+ -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+9. Get throughput 10 times and calculate the average throughput,check the throughput of 8 queues is eight times of 1 queue::
+
+ testpmd>show port stats all
+
+Test Case 4: loopback with virtio 1.0 inorder no-mergeable path using 1 queue and 8 queues
+==========================================================================================
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
- >set fwd mac
- >start
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
@@ -201,29 +245,56 @@ Test Case 5: loopback 2 queues test with inorder no-mergeable path
testpmd>show port stats all
-5. Check each queue's RX/TX packet numbers::
+5. Check each RX/TX queue has packets, then quit testpmd::
testpmd>stop
+ testpmd>quit
+
+6. Launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+ -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
-Test Case 6: loopback 8 queues test with mergeable path
-=======================================================
+7. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=1 \
+ -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+9. Get throughput 10 times and calculate the average throughput,check the throughput of 8 queues is eight times of 1 queue::
+
+ testpmd>show port stats all
+
+Test Case 5: loopback with virtio 1.0 mergeable path using 1 queue and 8 queues
+===============================================================================
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 2-6 -n 4 --socket-mem 1024,1024 --no-pci \
- --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
- -i --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 7-11 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,in_order=0,mrg_rxbuf=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=4--rxq=8 --txq=8 --txd=1024 --rxd=1024
- >set fwd mac
- >start
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
@@ -234,30 +305,56 @@ Test Case 6: loopback 8 queues test with mergeable path
testpmd>show port stats all
-5. Check each queue's RX/TX packet numbers::
+5. Check each RX/TX queue has packets, then quit testpmd::
testpmd>stop
+ testpmd>quit
+6. Launch testpmd by below command::
-Test Case 7: loopback 8 queues test with normal path
-====================================================
+ rm -rf vhost-net*
+ ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+ -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+7. Launch virtio-user by below command::
-1. Launch vhost by below command::
+ ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=1,in_order=0 \
+ -- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+9. Get throughput 10 times and calculate the average throughput,check the throughput of 8 queues is eight times of 1 queue::
+
+ testpmd>show port stats all
+
+Test Case 6: loopback with virtio 1.0 normal path using 1 queue and 8 queues
+============================================================================
+
+1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-6 --socket-mem 1024,1024 --legacy-mem --no-pci \
- --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=8' -- \
- -i --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --rxd=1024
- >set fwd mac
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 7-11 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,in_order=0,mrg_rxbuf=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --rxd=1024
- >set fwd mac
- >start
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
@@ -268,29 +365,56 @@ Test Case 7: loopback 8 queues test with normal path
testpmd>show port stats all
-5. Check each queue's RX/TX packet numbers::
+5. Check each RX/TX queue has packets, then quit testpmd::
testpmd>stop
+ testpmd>quit
+
+6. Launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+ -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
-Test Case 8: loopback 8 queues test with vector_rx path
-=======================================================
+7. Launch virtio-user by below command::
-1. Launch vhost by below command::
+ ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0 \
+ -- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+9. Get throughput 10 times and calculate the average throughput,check the throughput of 8 queues is eight times of 1 queue::
+
+ testpmd>show port stats all
+
+Test Case 7: loopback with virtio 1.0 vector_rx path using 1 queue and 8 queues
+===============================================================================
+
+1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-6 --socket-mem 1024,1024 --legacy-mem --no-pci \
- --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=8' -- \
- -i --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --rxd=1024
- >set fwd mac
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 7-11 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,in_order=0,mrg_rxbuf=0 \
- -- -i --tx-offloads=0x0 --rss-ip --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --rxd=1024
- >set fwd mac
- >start
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
@@ -301,6 +425,33 @@ Test Case 8: loopback 8 queues test with vector_rx path
testpmd>show port stats all
-5. Check each queue's RX/TX packet numbers::
+5. Check each RX/TX queue has packets, then quit testpmd::
testpmd>stop
+ testpmd>quit
+
+6. Launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+ -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+7. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+9. Get throughput 10 times and calculate the average throughput,check the throughput of 8 queues is eight times of 1 queue::
+
+ testpmd>show port stats all
\ No newline at end of file
--
2.17.1
reply other threads:[~2019-07-08 2:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190707193523.27983-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).