From: Peng Zhihong <zhihongx.peng@intel.com>
To: dts@dpdk.org
Cc: Peng Zhihong <zhihongx.peng@intel.com>
Subject: [dts] [PATCH V1] add cvl support for VECTOR configuration
Date: Thu, 24 Oct 2019 09:02:01 -0700 [thread overview]
Message-ID: <20191024160201.32520-1-zhihongx.peng@intel.com> (raw)
add cvl support for VECTOR configuration
Signed-off-by: Peng Zhihong <zhihongx.peng@intel.com>
---
tests/TestSuite_vxlan.py | 76 +++++++++++++++++++++++++---------------
1 file changed, 47 insertions(+), 29 deletions(-)
diff --git a/tests/TestSuite_vxlan.py b/tests/TestSuite_vxlan.py
index 3651bac..6570364 100644
--- a/tests/TestSuite_vxlan.py
+++ b/tests/TestSuite_vxlan.py
@@ -261,6 +261,8 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
self.compile_switch = 'CONFIG_RTE_LIBRTE_I40E_INC_VECTOR'
elif self.nic in ["sageville", "sagepond"]:
self.compile_switch = 'CONFIG_RTE_IXGBE_INC_VECTOR'
+ elif self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
else:
self.verify(False, "%s not support this vxlan" % self.nic)
# Based on h/w type, choose how many ports to use
@@ -521,13 +523,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
"""
verify vxlan packet detection
"""
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
- if src_vec_model == 'y':
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
- + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
+ if src_vec_model == 'y':
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
"%(CHANNEL)d -- -i --disable-rss --rxq=4 --txq=4" + \
@@ -558,26 +564,34 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
out = self.dut.send_expect("stop", "testpmd>", 10)
self.dut.send_expect("quit", "#", 10)
-
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
- if src_vec_model != dst_vec_model:
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
- + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+ if src_vec_model != dst_vec_model:
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
def test_vxlan_ipv6_detect(self):
"""
verify vxlan packet detection with ipv6 header
"""
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
- if src_vec_model == 'y':
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
- + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
+ if src_vec_model == 'y':
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
"%(CHANNEL)d -- -i --disable-rss --rxq=4 --txq=4" + \
@@ -613,13 +627,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
out = self.dut.send_expect("stop", "testpmd>", 10)
self.dut.send_expect("quit", "#", 10)
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
- if src_vec_model != dst_vec_model:
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
- + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+ if src_vec_model != dst_vec_model:
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
def test_vxlan_ipv4_checksum_offload(self):
"""
--
2.17.1
next reply other threads:[~2019-10-24 8:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 16:02 Peng Zhihong [this message]
2019-10-24 8:16 ` He, Zhiwei
2019-11-04 2:58 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191024160201.32520-1-zhihongx.peng@intel.com \
--to=zhihongx.peng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).