[dts] [PATCH V3 3/4] test_plans/vm_pw_mgmt_policy: upload test plan

[yufengmx <yufengx.mo@intel.com>]

A feature allows workload to deliver policy to the host to manage power controls
such as p-states extends the thinking of the current scheme moving away
from direct controls to policy controls to avoid latency & jitter
penalties. Also provides the ability to react faster.

VM Power Manager would use a hint based mechanism by which a VM can
communicate to a host based governor about its current processing
requirements. By mapping VMs virtual CPUs to physical CPUs the Power Manager
can then make decisions according to some policy as to what power state the
physical CPUs can transition to.

VM Agent shall have the ability to send the following policy to host.
- traffic policy
- time policy

VM Agent shall have the ability to send the following hints to host::
- core disable turbo
- core enable turbo

Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
 test_plans/vm_pw_mgmt_policy_test_plan.rst | 337 +++++++++++++++++++++
 1 file changed, 337 insertions(+)
 create mode 100644 test_plans/vm_pw_mgmt_policy_test_plan.rst

diff --git a/test_plans/vm_pw_mgmt_policy_test_plan.rst b/test_plans/vm_pw_mgmt_policy_test_plan.rst
new file mode 100644
index 0000000..994492c
--- /dev/null
+++ b/test_plans/vm_pw_mgmt_policy_test_plan.rst
@@ -0,0 +1,337 @@
+.. Copyright (c) <2010-2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+========================================
+VM Power Management Tests (Policy/Turbo)
+========================================
+
+Inband Policy Control
+=====================
+
+A feature allows workload to deliver policy to the host to manage power controls
+such as p-states extends the thinking of the current scheme moving away
+from direct controls to policy controls to avoid latency & jitter
+penalties. Also provides the ability to react faster.
+
+VM Power Manager would use a hint based mechanism by which a VM can
+communicate to a host based governor about its current processing
+requirements. By mapping VMs virtual CPUs to physical CPUs the Power Manager
+can then make decisions according to some policy as to what power state the
+physical CPUs can transition to.
+
+VM Agent shall have the ability to send the following policy to host.
+- traffic policy
+- time policy
+
+turbo
+=====
+A new feature extend the library to enable 'per-core' turbo among other APIs.
+
+VM Agent shall have the ability to send the following hints to host::
+
+    - core disable turbo
+    - core enable turbo
+
+The power manager will manage the file handles for each core as below::
+
+    ``/dev/cpu/%d/msr``
+
+DPDK technical document refer to::
+
+    ``doc/guides/prog_guide/power_man.rst``
+    ``doc/guides/sample_app_ug/vm_power_management.rst``
+
+Prerequisites
+=============
+#. Hardware::
+
+    - NIC: i40e series('Ethernet Controller X710 for 10GbE SFP+ 1572')
+    - Per-core turbo is supported only on recent atchitectures.
+        Xeon(R) Gold 6252N etc
+
+#. BIOS::
+
+    - Enable VT-d and VT-x
+    - Enable Enhanced Intel SpeedStep(R) Tech
+    - Enable Intel(R) Turbo Boost Technology
+
+#. OS and Kernel::
+
+    - Fedora 30
+        vim /boot/grub2/grubenv
+        - Enable Kernel features IOMMU
+            iommu=pt
+        - Enable Intel IOMMU
+            intel_iommu=on
+        - Disable intel_pstate
+            intel_pstate=disable
+
+#. Virtualization::
+
+    - QEMU emulator version >= 2.3.1
+    - libvirtd (libvirt) >= 1.2.13.2
+      libvirt configuration refer to dpdk/doc/guides/howto/pvp_reference_benchmark.rst ``Libvirt way`` chapter
+
+#. port topology diagram::
+
+       packet generator                         DUT
+        .-----------.                      .-----------.
+        | .-------. |                      | .-------. |
+        | | portA | | <------------------> | | port0 | |
+        | | portB | | <------------------> | | port1 | |
+        | '-------' |                      | '-------' |
+        |           |                      |    nic    |
+        '-----------'                      '-----------'
+
+
+Set up testing environment
+==========================
+#. Configure VM XML to pin VCPUs/CPUs.
+
+   .. code-block:: xml
+
+    <vcpu placement='static'>8</vcpu>
+    <cputune>
+        <vcpupin vcpu='0' cpuset='1'/>
+        <vcpupin vcpu='1' cpuset='2'/>
+        <vcpupin vcpu='2' cpuset='3'/>
+        <vcpupin vcpu='3' cpuset='4'/>
+        <vcpupin vcpu='4' cpuset='5'/>
+        <vcpupin vcpu='5' cpuset='6'/>
+        <vcpupin vcpu='6' cpuset='7'/>
+        <vcpupin vcpu='7' cpuset='8'/>
+    </cputune>
+
+#. Configure VM XML to set up virtio serial ports.
+
+    Create temporary folder for vm_power socket.
+
+        mkdir /tmp/powermonitor
+        chmod 777 /tmp/powermonitor
+
+    Setup one serial port for every one vcpu in VM.
+
+    .. code-block:: xml
+
+        <channel type='unix'>
+            <source mode='bind' path='/tmp/powermonitor/<vm_name>.<channel_num>'/>
+            <target type='virtio' name='virtio.serial.port.poweragent.<channel_num>'/>
+            <address type='virtio-serial' controller='0' bus='0' port='4'/>
+        </channel>
+
+#. Create vf and passthrough it to VM.
+
+    Create vf on one pf with system driver.
+
+        echo 1 > /sys/bus/pci/devices/0000:d8:00.0/sriov_numvfs
+
+    .. code-block:: xml
+
+        <hostdev managed="yes" mode="subsystem" type="pci">
+            <driver name="vfio"/>
+            <source>
+                <address bus="0xd8" domain="0x0000" function="0x0" slot="0x02"/>
+            </source>
+            <address bus="0x00" domain="0x0000" function="0x0" slot="0x07" type="pci"/>
+        </hostdev>
+
+#. Bind the vf passthrough on VM to igb_uio, bind pf on host to default system driver.
+
+    ./usertools/dpdk-devbind.py --force --bind=igb_uio 0000:00:07.0
+
+#. Compile and run power-manager in host, core number should >= 3, add vm in host.
+
+    export RTE_SDK=`pwd`
+    export RTE_TARGET=x86_64-native-linuxapp-gcc
+    make -C examples/vm_power_manager
+
+   ./examples/vm_power_manager/build/vm_power_mgr -c 0x7 -n 4
+
+    vmpower> add_vm <vm_name>
+    vmpower> add_channels <vm_name> all
+    vmpower> set_channel_status <vm_name> all enabled
+
+#. Run testpmd on vm0 when do traffic policy testing, other test cases ignore
+   this step.
+
+    ./testpmd -c 0x3 -n 1 -v -m 1024 --file-prefix=vmpower1 -- -i --port-topology=loop
+
+    testpmd> set fwd mac
+    testpmd> set promisc all on
+    testpmd> port start all
+    testpmd> start
+
+#. Compile and run guest_vm_power_mgr on VM.
+
+    export RTE_SDK=`pwd`
+    export RTE_TARGET=x86_64-native-linuxapp-gcc
+    make -C examples/vm_power_manager/guest_cli
+
+   ./examples/vm_power_manager/guest_cli/build/guest_vm_power_mgr \
+   -c 0x1f -n 4 --file-prefix=vmpower2 -- -i --vm-name=<vm name> \
+   --policy=<policy name> --vcpu-list=<vcpus list> --busy-hours=<time stage>
+
+    options description::
+
+        -n or --vm-name
+           sets the name of the vm to be used by the host OS.
+        -b or --busy-hours
+           sets the list of hours that are predicted to be busy
+        -q or --quiet-hours
+           sets the list of hours that are predicted to be quiet
+        -l or --vcpu-list
+           sets the list of vcpus to monitor
+        -o or --policy
+           sets the default policy type
+              ``TIME``
+              ``WORKLOAD``
+
+        The format of the hours or list paramers is a comma-separated
+        list of integers, which can take the form of
+           a. x    e.g. --vcpu-list=1
+           b. x,y  e.g. --quiet-hours=3,4
+           c. x-y  e.g. --busy-hours=9-12
+           d. combination of above (e.g. --busy-hours=4,5-7,9)
+
+
+Test Case : time policy
+=======================
+check these content.
+#. when dut clock is set to a desired busy hours, put core to max freq.
+#. when dut clock is set to a desired quiet hours, put core to min freq.
+
+This case test multiple guest_vm_power_mgr options, they are composited
+by these content as below::
+
+    #. --policy
+       TIME
+    #. --vm-name
+      vm0
+    #. --vcpu-list
+      0
+      0,1,2,3,4,5,6,7
+    #. --busy-hours or --quiet-hours
+      23
+      0-23
+      4,5-7,23
+
+example::
+
+    --vm-name=vm0 --policy=TIME --vcpu-list=0,1,2,3,4,5,6,7 --busy-hours=0-23,5-7,23
+
+steps:
+
+#. set DUT system time to desired time.
+
+#. set up testing environment refer to ``Set up testing environment`` steps.
+
+#. trigger policy on vm DUT from guest_vm_power_mgr console::
+
+    vmpower(guest)> send_policy now
+
+#. check DUT platform cores frequency, which are in vcpu-list.
+
+
+Test Case : traffic policy
+==========================
+check these content.
+#. use packet generator to send a stream with a pps rate bigger 2000000,
+vcpu frequency will run at max frequency.
+#. use packet generator to send a stream with a pps rate between 1800000 and 2000000,
+vcpus frequency will run at med frequency.
+#. use packet generator to send a stream with a pps rate less than 1800000,
+vcpu frequency will run at min frequency.
+
+This case test multiple guest_vm_power_mgr options, they are composited
+by these content as below::
+
+    #. --policy
+       TRAFFIC
+    #. --vm-name
+      vm0
+    #. --vcpu-list
+      0
+      0,1,2,3,4,5,6,7
+
+example::
+
+    --vm-name=vm0 --policy=TRAFFIC --vcpu-list=0,1,2,3,4,5,6,7
+
+steps:
+
+#. set up testing environment refer to ``Set up testing environment`` steps.
+
+#. trigger policy on vm DUT from guest_vm_power_mgr console::
+
+    vmpower(guest)> send_policy now
+
+#. configure stream in traffic generator, set traffic generator line rate
+   to desired pps and send packet continuously.
+
+#. check DUT platform cores frequency, which are in vcpu-list.
+
+
+Test Case : disable CPU turbo
+=============================
+check a custom cpu turbo status can be disable.
+
+steps:
+
+#. set up testing environment refer to ``Set up testing environment`` steps.
+
+#. set cpu turbo disable on vm DUT from guest_vm_power_mgr console::
+
+    vmpower(guest)> set_cpu_freq <core_num> disable_turbo
+
+#. verify the DUT physical CPU's turbo has been disable correctly, core frequency
+   should be secondary max value in scaling_available_frequencies::
+
+    cat /sys/devices/system/cpu/cpu1/cpufreq/cpuinfo_cur_freq
+    cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies
+
+Test Case : enable CPU turbo
+============================
+check a custom cpu turbo status can be enable.
+
+steps:
+
+#. set up testing environment refer to ``Set up testing environment`` steps.
+
+#. set cpu turbo enable on vm DUT from guest_vm_power_mgr console::
+
+    vmpower(guest)> set_cpu_freq <vm_core_num> enable_turbo
+
+#. Verify the DUT physical CPU's turbo has been enable correctly, core frequency
+   should be max value in scaling_available_frequencies::
+
+    cat /sys/devices/system/cpu/cpu1/cpufreq/cpuinfo_cur_freq
+    cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies
-- 
2.21.0