From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: add packed virtqueue test in vm2vm topology
Date: Thu, 19 Dec 2019 19:36:33 +0000 [thread overview]
Message-ID: <20191219193633.77352-1-yinan.wang@intel.com> (raw)
From: Wang Yinan <yinan.wang@intel.com>
Add packed virtqueue and split virtqueue test in vm2vm_virtio_user_test_plan.rst
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
test_plans/vm2vm_virtio_user_test_plan.rst | 675 +++++++++++++++++++++
1 file changed, 675 insertions(+)
create mode 100644 test_plans/vm2vm_virtio_user_test_plan.rst
diff --git a/test_plans/vm2vm_virtio_user_test_plan.rst b/test_plans/vm2vm_virtio_user_test_plan.rst
new file mode 100644
index 0000000..a28ca92
--- /dev/null
+++ b/test_plans/vm2vm_virtio_user_test_plan.rst
@@ -0,0 +1,675 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+======================================
+vm2vm vhost-user/virtio-user test plan
+======================================
+
+Description
+===========
+
+This test plan includes split virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vector_rx path test, and packed virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable path test. This plan also check the payload of packets is accurate. For packed virtqueue test, need using qemu version > 4.2.0.
+
+Prerequisites
+=============
+
+Enable pcap lib in dpdk code and recompile::
+
+ --- a/config/common_base
+ +++ b/config/common_base
+ @@ -492,7 +492,7 @@ CONFIG_RTE_LIBRTE_PMD_NULL=y
+ #
+ # Compile software PMD backed by PCAP files
+ #
+ -CONFIG_RTE_LIBRTE_PMD_PCAP=n
+ +CONFIG_RTE_LIBRTE_PMD_PCAP=y
+
+Then build DPDK.
+
+Test flow
+=========
+Virtio-user <-> Vhost-user <-> Testpmd <-> Vhost-user <-> Virtio-user
+
+Test Case 1: packed virtqueue vm2vm mergeable path test
+=======================================================
+
+1. Launch vhost by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set fwd rxonly
+ testpmd>start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then send 8k length packets by virtio-user0 again::
+
+ testpmd>stop
+ testpmd>set txpkts 2000
+ testpmd>start tx_first 1
+
+6. Quit pdump and three testpmd, get 284 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+7. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+8. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+9. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set burst 1
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>set txpkts 2000
+ testpmd>start tx_first 1
+
+10. Quit pdump,vhost received packets in pdump-vhost-rx.pcap, check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 2: packed virtqueue vm2vm inorder mergeable path test
+===============================================================
+
+1. Launch testpmd by below command::
+
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set fwd rxonly
+ testpmd>start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=/root/pdump-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set burst 1
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then quit pdump and three testpmd, get 252 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+6. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+7. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+8. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set burst 1
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap, check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 3: packed virtqueue vm2vm non-mergeable path test
+===========================================================
+
+1. Launch testpmd by below command::
+
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=/root/pdump-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then quit pdump and three testpmd, get 251 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+6. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+7. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+8. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap, check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 4: packed virtqueue vm2vm inorder non-mergeable path test
+===================================================================
+
+1. Launch testpmd by below command::
+
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set fwd rxonly
+ testpmd>start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=/root/pdump-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then quit pdump and three testpmd, get 251 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+6. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+7. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+8. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap,check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 5: split virtqueue vm2vm mergeable path test
+======================================================
+
+1. Launch vhost by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set fwd rxonly
+ testpmd>start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then send 8k length packets by virtio-user0 again::
+
+ testpmd>stop
+ testpmd>set txpkts 2000
+ testpmd>start tx_first 1
+
+6. Quit pdump and three testpmd, get 288 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+7. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+8. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+9. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set burst 5
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>set txpkts 2000
+ testpmd>start tx_first 1
+
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap, check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 6: split virtqueue vm2vm inorder mergeable path test
+==============================================================
+
+1. Launch testpmd by below command::
+
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set fwd rxonly
+ testpmd>start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=/root/pdump-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then quit pdump and three testpmd, get 256 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+6. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+7. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+8. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set burst 5
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap,check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 7: split virtqueue vm2vm non-mergeable path test
+==========================================================
+
+1. Launch testpmd by below command::
+
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256 --enable-hw-vlan-strip
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=/root/pdump-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256 --enable-hw-vlan-strip
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then quit pdump and three testpmd, get 251 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+6. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+7. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+8. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256 --enable-hw-vlan-strip
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap,check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 8: split virtqueue vm2vm inorder non-mergeable path test
+==================================================================
+
+1. Launch testpmd by below command::
+
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set fwd rxonly
+ testpmd>start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=/root/pdump-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then quit pdump and three testpmd, get 251 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+6. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+7. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+8. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=1 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap,check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 9: split virtqueue vm2vm vector_rx path test
+======================================================
+
+1. Launch testpmd by below command::
+
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=/root/pdump-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then quit pdump and three testpmd, get 251 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+6. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+7. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+8. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=1 --txd=256 --rxd=256
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap,check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
\ No newline at end of file
--
2.17.1
next reply other threads:[~2019-12-20 2:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-19 19:36 Yinan [this message]
2019-12-20 8:12 ` Tu, Lijuan
2019-12-19 19:41 Yinan
2019-12-20 8:13 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191219193633.77352-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).