test suite reviews and discussions
 help / color / Atom feed
* [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed
@ 2020-02-13  9:51 Jiaqi Min
  2020-02-21  7:21 ` Fu, Qi
  2020-02-21  7:54 ` Tu, Lijuan
  0 siblings, 2 replies; 3+ messages in thread
From: Jiaqi Min @ 2020-02-13  9:51 UTC (permalink / raw)
  To: dts; +Cc: Jiaqi Min

fix test change linkspeed
add test change linkspeed vf
add testcase vf to test plan

Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
---
 test_plans/shutdown_api_test_plan.rst | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/test_plans/shutdown_api_test_plan.rst b/test_plans/shutdown_api_test_plan.rst
index 2d549e8..0968644 100644
--- a/test_plans/shutdown_api_test_plan.rst
+++ b/test_plans/shutdown_api_test_plan.rst
@@ -144,6 +144,26 @@ Test Case: Change Link Speed
    successfully.
 7. Repeat this process for every compatible speed depending on the NIC driver.
 
+Test Case: Change Link Speed VF
+----------------------------
+
+1. bind a PF to DPDK::
+    ./usertools/dpdk-devbind.py -b igb_uio 1b:00.0
+2. create a VF from this PF::
+    echo 1 > /sys/bus/pci/devices/0000\:1b\:00.0/max_vfs
+   bind a VF to DPDK::
+    ./usertools/dpdk-devbind.py -b igb_uio 1b:02.0
+3. launch testpmd with cmd::
+    ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 --file-prefix=minjq -- -i
+4. Run ``port stop all`` to stop all ports.
+5. Run ``port config all speed SPEED duplex HALF/FULL`` to select the new config for the link.
+6. Run ``port start all`` to restart all ports.
+   show port info all Check on the tester side that the VF configuration actually changed using ethtool.
+7. Run ``start`` again to restart the forwarding, then start packet generator to transmit
+   and receive packets, and check if testpmd is able to receive and forward packets
+   successfully.
+8. Repeat this process for every compatible speed depending on the NIC driver.
+
 Test Case: Enable/Disable Jumbo Frame
 -------------------------------------
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed
  2020-02-13  9:51 [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed Jiaqi Min
@ 2020-02-21  7:21 ` Fu, Qi
  2020-02-21  7:54 ` Tu, Lijuan
  1 sibling, 0 replies; 3+ messages in thread
From: Fu, Qi @ 2020-02-21  7:21 UTC (permalink / raw)
  To: Min, JiaqiX, dts; +Cc: Min, JiaqiX

Acked-by: Fu, Qi <qi.fu@intel.com>

Best regards,
Fu, Qi

-----Original Message-----
From: dts <dts-bounces@dpdk.org> On Behalf Of Jiaqi Min
Sent: Thursday, February 13, 2020 5:52 PM
To: dts@dpdk.org
Cc: Min, JiaqiX <jiaqix.min@intel.com>
Subject: [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed

fix test change linkspeed
add test change linkspeed vf
add testcase vf to test plan

Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
---
 test_plans/shutdown_api_test_plan.rst | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/test_plans/shutdown_api_test_plan.rst b/test_plans/shutdown_api_test_plan.rst
index 2d549e8..0968644 100644
--- a/test_plans/shutdown_api_test_plan.rst
+++ b/test_plans/shutdown_api_test_plan.rst
@@ -144,6 +144,26 @@ Test Case: Change Link Speed
    successfully.
 7. Repeat this process for every compatible speed depending on the NIC driver.
 
+Test Case: Change Link Speed VF
+----------------------------
+
+1. bind a PF to DPDK::
+    ./usertools/dpdk-devbind.py -b igb_uio 1b:00.0 2. create a VF from 
+this PF::
+    echo 1 > /sys/bus/pci/devices/0000\:1b\:00.0/max_vfs
+   bind a VF to DPDK::
+    ./usertools/dpdk-devbind.py -b igb_uio 1b:02.0 3. launch testpmd 
+with cmd::
+    ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 
+--file-prefix=minjq -- -i 4. Run ``port stop all`` to stop all ports.
+5. Run ``port config all speed SPEED duplex HALF/FULL`` to select the new config for the link.
+6. Run ``port start all`` to restart all ports.
+   show port info all Check on the tester side that the VF configuration actually changed using ethtool.
+7. Run ``start`` again to restart the forwarding, then start packet generator to transmit
+   and receive packets, and check if testpmd is able to receive and forward packets
+   successfully.
+8. Repeat this process for every compatible speed depending on the NIC driver.
+
 Test Case: Enable/Disable Jumbo Frame
 -------------------------------------
 
--
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed
  2020-02-13  9:51 [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed Jiaqi Min
  2020-02-21  7:21 ` Fu, Qi
@ 2020-02-21  7:54 ` Tu, Lijuan
  1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2020-02-21  7:54 UTC (permalink / raw)
  To: Min, JiaqiX, dts; +Cc: Min, JiaqiX

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Jiaqi Min
> Sent: Thursday, February 13, 2020 5:52 PM
> To: dts@dpdk.org
> Cc: Min, JiaqiX <jiaqix.min@intel.com>
> Subject: [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed
> 
> fix test change linkspeed
> add test change linkspeed vf
> add testcase vf to test plan
> 
> Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
> ---
>  test_plans/shutdown_api_test_plan.rst | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/test_plans/shutdown_api_test_plan.rst
> b/test_plans/shutdown_api_test_plan.rst
> index 2d549e8..0968644 100644
> --- a/test_plans/shutdown_api_test_plan.rst
> +++ b/test_plans/shutdown_api_test_plan.rst
> @@ -144,6 +144,26 @@ Test Case: Change Link Speed
>     successfully.
>  7. Repeat this process for every compatible speed depending on the NIC
> driver.
> 
> +Test Case: Change Link Speed VF
> +----------------------------
> +
> +1. bind a PF to DPDK::
> +    ./usertools/dpdk-devbind.py -b igb_uio 1b:00.0 2. create a VF from
> +this PF::
> +    echo 1 > /sys/bus/pci/devices/0000\:1b\:00.0/max_vfs
> +   bind a VF to DPDK::
> +    ./usertools/dpdk-devbind.py -b igb_uio 1b:02.0 3. launch testpmd
> +with cmd::
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4
> +--file-prefix=minjq -- -i 4. Run ``port stop all`` to stop all ports.
> +5. Run ``port config all speed SPEED duplex HALF/FULL`` to select the new
> config for the link.
> +6. Run ``port start all`` to restart all ports.
> +   show port info all Check on the tester side that the VF configuration
> actually changed using ethtool.
> +7. Run ``start`` again to restart the forwarding, then start packet generator
> to transmit
> +   and receive packets, and check if testpmd is able to receive and forward
> packets
> +   successfully.
> +8. Repeat this process for every compatible speed depending on the NIC
> driver.
> +
>  Test Case: Enable/Disable Jumbo Frame
>  -------------------------------------
> 
> --
> 2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-13  9:51 [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed Jiaqi Min
2020-02-21  7:21 ` Fu, Qi
2020-02-21  7:54 ` Tu, Lijuan

test suite reviews and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dts/0 dts/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dts dts/ http://inbox.dpdk.org/dts \
		dts@dpdk.org
	public-inbox-index dts


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dts


AGPL code for this site: git clone https://public-inbox.org/ public-inbox