test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v1] test_plans: add packed ring vectorized path case for loopback_multi_paths_port_restart test
@ 2020-04-09 20:27 Yinan
  2020-04-20  2:17 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-04-09 20:27 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

From: Wang Yinan <yinan.wang@intel.com>

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 ...ack_multi_paths_port_restart_test_plan.rst | 53 +++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)

diff --git a/test_plans/loopback_multi_paths_port_restart_test_plan.rst b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
index 1536ebf..4e5c886 100644
--- a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
+++ b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
@@ -34,7 +34,14 @@
 vhost/virtio loopback with multi-paths and port restart test plan
 =================================================================
 
-This test plan includes split virtqueue in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vector_rx path, and packed virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable path test. Also test port restart and only send one packet each time using testpmd.
+This test plan includes split virtqueue mergeable, non-mergeable, vectorized_rx,
+inorder mergeable, inorder non-mergeable path, and packed virtqueue mergeable,
+non-mergeable,inorder mergeable, inorder non-mergeable, vectorized path test.
+Also test port restart and only send one packet each time using testpmd.
+Note: Packed virtqueue vectorized path need below three initial requirements:
+    1. AVX512 is allowed in config file and supported by compiler
+    2. Host cpu support AVX512F
+    3. ring size is power of two
 
 Test Case 1: loopback test with packed ring mergeable path
 ==========================================================
@@ -173,8 +180,8 @@ Test Case 4: loopback test with packed ring inorder non-mergeable path
 
     ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
     --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
-    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+    -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
     >set fwd mac
     >start
 
@@ -398,6 +405,46 @@ Test Case 9: loopback test with split ring vector_rx path
     testpmd>port stop 0
     testpmd>show port stats all
 
+6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
+
+    testpmd>port start 0
+    testpmd>set burst 1
+    testpmd>start tx_first 1
+    testpmd>show port stats all
+
+Test Case 10: loopback test with packed ring vectorized path
+============================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4 --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=0,mrg_rxbuf=0,packed_vec=1 \
+    -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd, [frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Get throughput 10 times and calculate the average throughput::
+
+    testpmd>show port stats all
+
+5. Stop port at vhost side and re-calculate the average throughput, verify the throughput is zero after port stop::
+
+    testpmd>stop
+    testpmd>port stop 0
+    testpmd>show port stats all
+
 6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
 
     testpmd>port start 0
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2020-04-20  2:17 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-09 20:27 [dts] [PATCH v1] test_plans: add packed ring vectorized path case for loopback_multi_paths_port_restart test Yinan
2020-04-20  2:17 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).