From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: add packed ring vectorized cases in vm2vm_virtio_user test
Date: Sat, 25 Apr 2020 17:37:40 +0000 [thread overview]
Message-ID: <20200425173740.48722-1-yinan.wang@intel.com> (raw)
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
test_plans/vm2vm_virtio_user_test_plan.rst | 87 ++++++++++++++++++----
1 file changed, 74 insertions(+), 13 deletions(-)
diff --git a/test_plans/vm2vm_virtio_user_test_plan.rst b/test_plans/vm2vm_virtio_user_test_plan.rst
index 0aa2501..de5bbb6 100644
--- a/test_plans/vm2vm_virtio_user_test_plan.rst
+++ b/test_plans/vm2vm_virtio_user_test_plan.rst
@@ -38,10 +38,6 @@ Description
===========
This test plan includes split virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vector_rx path test, and packed virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vectorized path test. This plan also check the payload of packets is accurate.
-Note: Packed virtqueue vectorized path need below three initial requirements:
- 1. AVX512 is allowed in config file and supported by compiler
- 2. Host cpu support AVX512F
- 3. ring size is power of two
Prerequisites
=============
@@ -628,7 +624,7 @@ Test Case 9: split virtqueue vm2vm vector_rx path test
./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
--no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
3. Attach pdump secondary process to primary process by same file-prefix::
@@ -639,7 +635,7 @@ Test Case 9: split virtqueue vm2vm vector_rx path test
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
testpmd>set burst 1
testpmd>start tx_first 27
@@ -668,7 +664,7 @@ Test Case 9: split virtqueue vm2vm vector_rx path test
./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
--no-pci \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
testpmd>set burst 1
testpmd>start tx_first 27
@@ -683,15 +679,15 @@ Test Case 10: packed virtqueue vm2vm vectorized path test
1. Launch testpmd by below command::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
--no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
testpmd>set fwd rxonly
testpmd>start
@@ -702,9 +698,9 @@ Test Case 10: packed virtqueue vm2vm vectorized path test
4. Launch virtio-user0 and send 8k length packets::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
testpmd>set burst 1
testpmd>start tx_first 27
@@ -733,7 +729,7 @@ Test Case 10: packed virtqueue vm2vm vectorized path test
./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
--no-pci \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
testpmd>set burst 1
testpmd>start tx_first 27
@@ -741,4 +737,69 @@ Test Case 10: packed virtqueue vm2vm vectorized path test
testpmd>set burst 32
testpmd>start tx_first 7
+9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap,check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
+
+Test Case 10: packed virtqueue vm2vm vectorized path test with ring size is not power of 2
+==========================================================================================
+
+1. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+
+2. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio1 \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
+ -- -i --nb-cores=1 --txd=255 --rxd=255
+ testpmd>set fwd rxonly
+ testpmd>start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=/root/pdump-rx.pcap,mbuf-size=8000'
+
+4. Launch virtio-user0 and send 8k length packets::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
+ -- -i --nb-cores=1 --txd=255 --rxd=255
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+ testpmd>stop
+ testpmd>set txpkts 2000,2000,2000,2000
+ testpmd>start tx_first 1
+
+5. Start vhost, then quit pdump and three testpmd, get 251 packets received by virtio-user1 in pdump-virtio-rx.pcap.
+
+6. Launch testpmd by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
+ -i --nb-cores=1 --no-flush-rx
+ testpmd>set fwd rxonly
+ testpmd>start
+
+7. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=vhost -- --pdump 'port=0,queue=*,rx-dev=/root/pdump-vhost-rx.pcap,mbuf-size=8000'
+
+8. Launch virtio-user1 by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ --no-pci \
+ --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
+ -- -i --nb-cores=1 --txd=255 --rxd=255
+ testpmd>set burst 1
+ testpmd>start tx_first 27
+ testpmd>stop
+ testpmd>set burst 32
+ testpmd>start tx_first 7
+
9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap,check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
\ No newline at end of file
--
2.17.1
next reply other threads:[~2020-04-26 0:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-25 17:37 Yinan [this message]
2020-04-27 7:50 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200425173740.48722-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).