*. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by test_plans/vhost_user_interrupt_test_plan.rst Signed-off-by: Xiao Qimai --- .../vhost_enqueue_interrupt_test_plan.rst | 145 ------------------ 1 file changed, 145 deletions(-) delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst b/test_plans/vhost_enqueue_interrupt_test_plan.rst deleted file mode 100644 index ee9b7a5d..00000000 --- a/test_plans/vhost_enqueue_interrupt_test_plan.rst +++ /dev/null @@ -1,145 +0,0 @@ -.. Copyright (c) <2019>, Intel Corporation - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - - - Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - OF THE POSSIBILITY OF SUCH DAMAGE. - -====================================== -vhost enqueue interrupt mode test plan -====================================== - -Description -=========== - -Vhost enqueue interrupt need test with l3fwd-power sample, small packets send from virtio-user to vhost side， -check vhost-user cores can be wakeup，and vhost-user cores should be back to sleep after stop sending packets -from virtio side. - -Prerequisites -============= - -Modify l3fwd-power example code and recompile:: - - --- a/examples/l3fwd-power/main.c - +++ b/examples/l3fwd-power/main.c - @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = { - .mq_mode = ETH_MQ_RX_RSS, - .max_rx_pkt_len = RTE_ETHER_MAX_LEN, - .split_hdr_size = 0, - - .offloads = DEV_RX_OFFLOAD_CHECKSUM, - }, - .rx_adv_conf = { - .rss_conf = { - -Test flow -========= - -Virtio-user --> Vhost-user - -Test Case1: Wake up split ring vhost-user core with l3fwd-power sample -====================================================================== - -1. Launch virtio-user with server mode:: - - ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1 -- -i - -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device:: - - ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \ - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)" - -3. Send packet by testpmd, check vhost-user core will keep wakeup status:: - - testpmd>set fwd txonly - testpmd>start - -4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again. - -Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample when multi queues are enabled -===================================================================================================== - -1. Launch virtio-user with server mode:: - - ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4 -- -i --rxq=4 --txq=4 --rss-ip - -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device:: - - ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \ - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \ - --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)" - -3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status:: - - testpmd>set fwd txonly - testpmd>start - -4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again. - -Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample -======================================================================= - -1. Launch virtio-user with server mode:: - - ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i - -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device:: - - ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \ - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)" - -3. Send packet by testpmd, check vhost-user core will keep wakeup status:: - - testpmd>set fwd txonly - testpmd>start - -4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again. - -Test Case4: Wake up packed ring vhost-user cores with l3fwd-power sample when multi queues are enabled -======================================================================================================= - -1. Launch virtio-user with server mode:: - - ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip - -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device:: - - ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \ - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \ - --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)" - -3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status:: - - testpmd>set fwd txonly - testpmd>start - -4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again. -- 2.25.1