From: Haiyang Zhao <haiyangx.zhao@intel.com>
To: dts@dpdk.org
Cc: Haiyang Zhao <haiyangx.zhao@intel.com>
Subject: [dts] [PATCH V1] test_plans: fix build warning and errors
Date: Mon, 21 Dec 2020 17:53:44 +0800 [thread overview]
Message-ID: <20201221095344.7564-1-haiyangx.zhao@intel.com> (raw)
fix test plans build warning and errors for DTS 20.11 formal release.
Signed-off-by: Haiyang Zhao <haiyangx.zhao@intel.com>
---
test_plans/cvl_dcf_acl_filter_test_plan.rst | 13 +-
.../cvl_dcf_switch_filter_test_plan.rst | 20 +-
test_plans/dcf_lifecycle_test_plan.rst | 10 +-
test_plans/dpdk_gro_lib_test_plan.rst | 59 +++---
test_plans/iavf_fdir_test_plan.rst | 8 +
test_plans/index.rst | 15 +-
test_plans/large_vf_test_plan.rst | 4 +-
test_plans/pipeline_test_plan.rst | 4 +-
test_plans/stats_checks_test_plan.rst | 198 +++++++++---------
test_plans/vhost_cbdma_test_plan.rst | 10 +-
test_plans/virtio_smoke_test_plan.rst | 2 +-
.../vm2vm_virtio_net_perf_test_plan.rst | 26 +--
12 files changed, 194 insertions(+), 175 deletions(-)
diff --git a/test_plans/cvl_dcf_acl_filter_test_plan.rst b/test_plans/cvl_dcf_acl_filter_test_plan.rst
index 086f2722..e9267a59 100644
--- a/test_plans/cvl_dcf_acl_filter_test_plan.rst
+++ b/test_plans/cvl_dcf_acl_filter_test_plan.rst
@@ -108,11 +108,12 @@ Prerequisites
10. Launch dpdk on VF1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -w 86:01.1 --file-prefix=vf1 -- -i
- testpmd> set fwd rxonly
- testpmd> set verbose 1
- testpmd> start
- testpmd> show port info all
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -w 86:01.1 --file-prefix=vf1 -- -i
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+ testpmd> show port info all
+
check the VF1 driver is net_iavf.
the mac address is 00:01:23:45:67:89
@@ -806,7 +807,7 @@ Test Case 9: multirules with different pattern or input set
flow create 0 ingress pattern eth / ipv4 src spec 192.168.2.3 src mask 255.255.0.255 / udp / end actions drop / end
10. send same packets, check packet 1 is dropped by rule 0, packet 2 is dropped by rule 1.
- packet 3 is dropped by rule 2, packet 4 is dropped by rule 3, packet 5 is dropped by rule4.
+ packet 3 is dropped by rule 2, packet 4 is dropped by rule 3, packet 5 is dropped by rule4.
Test Case 10: multirules with all patterns
==========================================
diff --git a/test_plans/cvl_dcf_switch_filter_test_plan.rst b/test_plans/cvl_dcf_switch_filter_test_plan.rst
index c90f439e..3b63c041 100644
--- a/test_plans/cvl_dcf_switch_filter_test_plan.rst
+++ b/test_plans/cvl_dcf_switch_filter_test_plan.rst
@@ -4558,10 +4558,10 @@ Subcase 1: DCF stop/DCF start
5. send matched packets, port 1 can still receive the packets.
Test case: Drop action test
-======================
+===========================
Subcase 1: DCF DROP IPV4 SRC PACKAGES
------------------------------
+-------------------------------------
1. validate a rule::
@@ -4605,7 +4605,7 @@ Subcase 1: DCF DROP IPV4 SRC PACKAGES
send matched packets, check port can receive the packet.
Subcase 2: DCF DROP IPV4 SRC SPEC MASK PACKAGES
------------------------------
+-----------------------------------------------
1. validate a rule::
@@ -4649,7 +4649,7 @@ Subcase 2: DCF DROP IPV4 SRC SPEC MASK PACKAGES
send matched packets, check port can receive the packet.
Subcase 3: DCF DROP NVGRE PACKAGES
------------------------------
+----------------------------------
1. validate a rule::
@@ -4693,7 +4693,7 @@ Subcase 3: DCF DROP NVGRE PACKAGES
send matched packets, check port can receive the packet.
Subcase 4: DCF DROP PPOES PACKAGES
------------------------------
+----------------------------------
1. validate a rule::
@@ -4737,7 +4737,7 @@ Subcase 4: DCF DROP PPOES PACKAGES
send matched packets, check port can receive the packet.
Subcase 5: DCF DROP PFCP PACKAGES
------------------------------
+----------------------------------
1. validate a rule::
@@ -4781,7 +4781,7 @@ Subcase 5: DCF DROP PFCP PACKAGES
send matched packets, check port can receive the packet.
Subcase 6: DCF DROP VLAN PACKAGES
------------------------------
+----------------------------------
1. validate a rule::
@@ -4825,7 +4825,7 @@ Subcase 6: DCF DROP VLAN PACKAGES
send matched packets, check port can receive the packet.
Subcase 7: DCF DROP L2TP PACKAGES
------------------------------
+----------------------------------
1. validate a rule::
@@ -4869,7 +4869,7 @@ Subcase 7: DCF DROP L2TP PACKAGES
send matched packets, check port can receive the packet.
Subcase 8: DCF DROP ESP PACKAGES
------------------------------
+---------------------------------
1. validate a rule::
@@ -4913,7 +4913,7 @@ Subcase 8: DCF DROP ESP PACKAGES
send matched packets, check port can receive the packet.
Subcase 8: DCF DROP blend PACKAGES
------------------------------
+-----------------------------------
1. validate a rule::
diff --git a/test_plans/dcf_lifecycle_test_plan.rst b/test_plans/dcf_lifecycle_test_plan.rst
index c3e039f6..1e5fcecd 100644
--- a/test_plans/dcf_lifecycle_test_plan.rst
+++ b/test_plans/dcf_lifecycle_test_plan.rst
@@ -812,7 +812,7 @@ If kill DCF process, when DCF launched. The DCF rules should be removed.
sendp([Ether(src="00:11:22:33:44:55", dst="5E:8E:8B:4D:89:05")/IP()/TCP(sport=8012)/Raw(load='X'*30)], iface="testeri0")
- check the packet is dropped by VF1::
+ check the packet is dropped by VF1.
3. kill DCF process ::
@@ -843,7 +843,7 @@ Kill DCF process, then fail to launch avf on the previous DCF VF.
sendp([Ether(src="00:11:22:33:44:55", dst="5E:8E:8B:4D:89:05")/IP()/TCP(sport=8012)/Raw(load='X'*30)], iface="testeri0")
- check the packet is dropped by VF1::
+ check the packet is dropped by VF1.
3. kill DCF process ::
@@ -878,7 +878,7 @@ TC28: DCF graceful exit
sendp([Ether(src="00:11:22:33:44:55", dst="5E:8E:8B:4D:89:05")/IP()/TCP(sport=8012)/Raw(load='X'*30)], iface="testeri0")
- check the packet is dropped by VF1::
+ check the packet is dropped by VF1.
3. Exit the DCF in DCF testpmd ::
@@ -899,7 +899,7 @@ TC29: DCF enabled, AVF VF reset
sendp([Ether(src="00:11:22:33:44:55", dst="5E:8E:8B:4D:89:05")/IP()/TCP(sport=8012)/Raw(load='X'*30)], iface="testeri0")
- check the packet is dropped by VF1::
+ check the packet is dropped by VF1.
3. reset VF1 in testpmd::
@@ -940,7 +940,7 @@ TC30: DCF enabled, DCF VF reset
sendp([Ether(src="00:11:22:33:44:55", dst="5E:8E:8B:4D:89:05")/IP()/TCP(sport=8012)/Raw(load='X'*30)], iface="testeri0")
- check the packet is dropped by VF1::
+ check the packet is dropped by VF1.
3. reset VF0 in testpmd::
diff --git a/test_plans/dpdk_gro_lib_test_plan.rst b/test_plans/dpdk_gro_lib_test_plan.rst
index fac61aa8..bdbcdf62 100644
--- a/test_plans/dpdk_gro_lib_test_plan.rst
+++ b/test_plans/dpdk_gro_lib_test_plan.rst
@@ -89,27 +89,27 @@ Modify the testpmd code as following::
Modify the dpdk code as following::
-diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
-index b38a4b6b1..573250dbe 100644
---- a/drivers/net/vhost/rte_eth_vhost.c
-+++ b/drivers/net/vhost/rte_eth_vhost.c
-@@ -1071,8 +1071,14 @@ eth_dev_info(struct rte_eth_dev *dev,
- dev_info->min_rx_bufsize = 0;
-
- dev_info->tx_offload_capa = DEV_TX_OFFLOAD_MULTI_SEGS |
-- DEV_TX_OFFLOAD_VLAN_INSERT;
-- dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP;
-+ DEV_TX_OFFLOAD_VLAN_INSERT |
-+ DEV_TX_OFFLOAD_UDP_CKSUM |
-+ DEV_TX_OFFLOAD_TCP_CKSUM |
-+ DEV_TX_OFFLOAD_IPV4_CKSUM |
-+ DEV_TX_OFFLOAD_TCP_TSO;
-+ dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP |
-+ DEV_RX_OFFLOAD_TCP_CKSUM |
-+ DEV_RX_OFFLOAD_UDP_CKSUM |
-+ DEV_RX_OFFLOAD_IPV4_CKSUM |
-+ DEV_RX_OFFLOAD_TCP_LRO;
- }
+ diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
+ index b38a4b6b1..573250dbe 100644
+ --- a/drivers/net/vhost/rte_eth_vhost.c
+ +++ b/drivers/net/vhost/rte_eth_vhost.c
+ @@ -1071,8 +1071,14 @@ eth_dev_info(struct rte_eth_dev *dev,
+ dev_info->min_rx_bufsize = 0;
+
+ dev_info->tx_offload_capa = DEV_TX_OFFLOAD_MULTI_SEGS |
+ - DEV_TX_OFFLOAD_VLAN_INSERT;
+ - dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP;
+ + DEV_TX_OFFLOAD_VLAN_INSERT |
+ + DEV_TX_OFFLOAD_UDP_CKSUM |
+ + DEV_TX_OFFLOAD_TCP_CKSUM |
+ + DEV_TX_OFFLOAD_IPV4_CKSUM |
+ + DEV_TX_OFFLOAD_TCP_TSO;
+ + dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP |
+ + DEV_RX_OFFLOAD_TCP_CKSUM |
+ + DEV_RX_OFFLOAD_UDP_CKSUM |
+ + DEV_RX_OFFLOAD_IPV4_CKSUM |
+ + DEV_RX_OFFLOAD_TCP_LRO;
+ }
Test flow
=========
@@ -148,7 +148,7 @@ Test Case1: DPDK GRO lightmode test with tcp/ipv4 traffic
3. Set up vm with virto device and using kernel virtio-net driver::
- taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
+ taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
-mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
@@ -200,7 +200,7 @@ Test Case2: DPDK GRO heavymode test with tcp/ipv4 traffic
3. Set up vm with virto device and using kernel virtio-net driver::
- taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
+ taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
-mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
@@ -252,7 +252,7 @@ Test Case3: DPDK GRO heavymode_flush4 test with tcp/ipv4 traffic
3. Set up vm with virto device and using kernel virtio-net driver::
- taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
+ taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
-mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
@@ -278,10 +278,11 @@ Test Case4: DPDK GRO test with vxlan traffic
Vxlan topology
--------------
VM Host
+
50.1.1.2 50.1.1.1
- | |
+ \| \|
1.1.2.3 1.1.2.4
- |------------Testpmd------------|
+ \|------------Testpmd------------|
1. Connect two nic port directly, put nic2 into another namesapce and create Host VxLAN port::
@@ -322,7 +323,7 @@ Vxlan topology
3. Set up vm with virto device and using kernel virtio-net driver::
- taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
+ taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
-mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
@@ -383,7 +384,7 @@ NIC2(In kernel) -> NIC1(DPDK) -> testpmd(csum fwd) -> Vhost -> Virtio-net
3. Set up vm with virto device and using kernel virtio-net driver::
- taskset -c 31 /home/qemu-install/qemu-4.2.1/bin/qemu-system-x86_64 -name us-vhost-vm1 \
+ taskset -c 31 /home/qemu-install/qemu-4.2.1/bin/qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
-mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -netdev user,id=yinan,hostfwd=tcp:127.0.0.1:6005-:22 -device e1000,netdev=yinan \
@@ -441,7 +442,7 @@ NIC2(In kernel) -> NIC1(DPDK) -> testpmd(csum fwd) -> Vhost -> Virtio-net
3. Set up vm with virto device and using kernel virtio-net driver::
- taskset -c 31 /home/qemu-install/qemu-4.2.1/bin/qemu-system-x86_64 -name us-vhost-vm1 \
+ taskset -c 31 /home/qemu-install/qemu-4.2.1/bin/qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
-mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -netdev user,id=yinan,hostfwd=tcp:127.0.0.1:6005-:22 -device e1000,netdev=yinan \
diff --git a/test_plans/iavf_fdir_test_plan.rst b/test_plans/iavf_fdir_test_plan.rst
index e0c9d603..6de28d2c 100644
--- a/test_plans/iavf_fdir_test_plan.rst
+++ b/test_plans/iavf_fdir_test_plan.rst
@@ -2431,6 +2431,7 @@ Subcase 1: Layer3 co-exist GTP EH fdir + dst
--------------------------------------------
Rules::
+
#1 flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.31 / udp / gtpu / gtp_psc / end actions rss queues 1 2 end / mark id 1 / end
#2 flow create 0 ingress pattern eth / ipv6 dst is ::32 / udp / gtpu / gtp_psc / end actions rss queues 3 4 5 6 end / mark id 2 / end
#3 flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.33 / udp / gtpu / gtp_psc / end actions queue index 7 / mark id 3 / end
@@ -2441,6 +2442,7 @@ Rules::
#8 flow create 0 ingress pattern eth / ipv6 dst is ::38 / udp / gtpu / gtp_psc / end actions drop / end
Matched packets::
+
p_gtpu1 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.21", dst="192.168.0.31")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/GTP_PDUSession_ExtensionHeader(pdu_type=0, qos_flow=0x33)/IPv6()/UDP()/Raw('x'*20)
p_gtpu2 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IPv6(src="::12", dst="::32")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x33)/IPv6()/TCP()/Raw('x'*20)
p_gtpu3 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.23", dst="192.168.0.33")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x33)/IPv6()/Raw('x'*20)
@@ -2451,6 +2453,7 @@ Matched packets::
p_gtpu8 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IPv6(src="2001::8", dst="::38")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/GTP_PDUSession_ExtensionHeader(pdu_type=0, qos_flow=0x33)/IPv6()/IPv6ExtHdrFragment()/Raw('x'*20)
Mismatched packets::
+
p_gtpu1 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.21", dst="192.168.0.32")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/GTP_PDUSession_ExtensionHeader(pdu_type=0, qos_flow=0x33)/IPv6()/UDP()/Raw('x'*20)
p_gtpu2 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IPv6(src="::12", dst="::33")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x33)/IPv6()/TCP()/Raw('x'*20)
p_gtpu3 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.23", dst="192.168.0.34")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x33)/IPv6()/Raw('x'*20)
@@ -2506,6 +2509,7 @@ Subcase 2: Layer3 co-exist GTP fdir + dst
-----------------------------------------
Rules::
+
#1 flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.31 / udp / gtpu / end actions rss queues 1 2 end / mark id 1 / end
#2 flow create 0 ingress pattern eth / ipv6 dst is ::32 / udp / gtpu / end actions rss queues 3 4 5 6 end / mark id 2 / end
#3 flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.33 / udp / gtpu / end actions queue index 7 / mark id 3 / end
@@ -2516,6 +2520,7 @@ Rules::
#8 flow create 0 ingress pattern eth / ipv6 dst is ::38 / udp / gtpu / end actions drop / end
Matched packets::
+
p_gtpu1 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.21", dst="192.168.0.31")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/IPv6()/UDP()/Raw('x'*20)
p_gtpu2 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IPv6(src="::12", dst="::32")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/IPv6()/TCP()/Raw('x'*20)
p_gtpu3 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.23", dst="192.168.0.33")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/IPv6()/Raw('x'*20)
@@ -2526,6 +2531,7 @@ Matched packets::
p_gtpu8 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IPv6(src="2001::8", dst="::38")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/IPv6()/IPv6ExtHdrFragment()/Raw('x'*20)
Mismatched packets::
+
p_gtpu1 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.21", dst="192.168.0.32")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/IPv6()/UDP()/Raw('x'*20)
p_gtpu2 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IPv6(src="::12", dst="::33")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/IPv6()/TCP()/Raw('x'*20)
p_gtpu3 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.23", dst="192.168.0.34")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/IPv6()/Raw('x'*20)
@@ -2541,6 +2547,7 @@ Subcase 3: Layer3 co-exist GTP EH fdir + src
--------------------------------------------
Rules::
+
#1 flow create 0 ingress pattern eth / ipv4 src is 192.168.0.21 / udp / gtpu / gtp_psc / end actions rss queues 1 2 end / mark id 1 / end
#2 flow create 0 ingress pattern eth / ipv6 src is ::12 / udp / gtpu / gtp_psc / end actions rss queues 3 4 5 6 end / mark id 2 / end
#3 flow create 0 ingress pattern eth / ipv4 src is 192.168.0.23 / udp / gtpu / gtp_psc / end actions queue index 7 / mark id 3 / end
@@ -2587,6 +2594,7 @@ Rules::
#6 flow create 0 ingress pattern eth / ipv6 src is ::16 / udp / gtpu / end actions passthru / mark id 6 / end
#7 flow create 0 ingress pattern eth / ipv4 src is 192.168.0.27 / udp / gtpu / end actions drop / end
#8 flow create 0 ingress pattern eth / ipv6 src is 2001::8 / udp / gtpu / end actions drop / end
+
Matched packets::
p_gtpu1 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.21", dst="192.168.0.31")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12)/IPv6()/UDP()/Raw('x'*20)
diff --git a/test_plans/index.rst b/test_plans/index.rst
index 6a0750d1..1a3f8383 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -45,14 +45,17 @@ The following are the test plans for the DPDK DTS automated test system.
cvl_advanced_rss_test_plan
cvl_advanced_rss_gtpu_test_plan
cvl_advanced_iavf_rss_test_plan
+ cvl_advanced_iavf_rss_gtpu_test_plan
+ cvl_advanced_iavf_rss_vlan_esp_ah_l2tp_pfcp_test_plan
cvl_advanced_rss_pppoe_vlan_esp_ah_l2tp_pfcp_test_plan
+ cvl_dcf_acl_filter_test_plan
cvl_dcf_date_path_test_plan
- cvl_dcf_dp_test_plan
cvl_dcf_switch_filter_test_plan
cvl_fdir_test_plan
- cvl_iavf_rss_gtpu_test_plan
+ cvl_limit_value_test_test_plan
cvl_rss_configure_test_plan
cvl_switch_filter_test_plan
+ cvl_vf_support_multicast_address_test_plan
cloud_filter_with_l4_port_test_plan
dcf_lifecycle_test_plan
crypto_perf_cryptodev_perf_test_plan
@@ -65,6 +68,7 @@ The following are the test plans for the DPDK DTS automated test system.
dynamic_config_test_plan
dynamic_flowtype_test_plan
dynamic_queue_test_plan
+ eeprom_dump_test_plan
etag_test_plan
external_memory_test_plan
external_mempool_handler_test_plan
@@ -98,6 +102,7 @@ The following are the test plans for the DPDK DTS automated test system.
l3fwd_em_test_plan
l3fwd_test_plan
l3fwdacl_test_plan
+ large_vf_test_plan
link_flowctrl_test_plan
link_status_interrupt_test_plan
linux_modules_test_plan
@@ -114,6 +119,7 @@ The following are the test plans for the DPDK DTS automated test system.
perf_virtio_user_loopback_test_plan
perf_virtio_user_pvp_test_plan
perf_vm2vm_virtio_net_perf_test_plan
+ pipeline_test_plan
pvp_virtio_user_multi_queues_port_restart_test_plan
pmd_bonded_8023ad_test_plan
pmd_bonded_test_plan
@@ -136,10 +142,10 @@ The following are the test plans for the DPDK DTS automated test system.
rss_key_update_test_plan
rxtx_offload_test_plan
rteflow_priority_test_plan
+ rte_flow_test_plan
runtime_vf_queue_number_kernel_test_plan
runtime_vf_queue_number_maxinum_test_plan
runtime_vf_queue_number_test_plan
- rxtx_offload_test_plan
scatter_test_plan
short_live_test_plan
shutdown_api_test_plan
@@ -182,6 +188,7 @@ The following are the test plans for the DPDK DTS automated test system.
vf_pf_reset_test_plan
vf_port_start_stop_test_plan
vf_rss_test_plan
+ vf_single_core_perf_test_plan
vf_to_vf_nic_bridge_test_plan
vf_vlan_test_plan
kernelpf_iavf_test_plan
@@ -211,11 +218,13 @@ The following are the test plans for the DPDK DTS automated test system.
virtio_event_idx_interrupt_test_plan
virtio_ipsec_cryptodev_func_test_plan
virtio_perf_cryptodev_func_test_plan
+ virtio_smoke_test_plan
vm2vm_virtio_net_perf_test_plan
vm2vm_virtio_pmd_test_plan
dpdk_gro_lib_test_plan
dpdk_gso_lib_test_plan
vhost_dequeue_zero_copy_test_plan
+ vswitch_sample_cbdma_test_plan
vxlan_gpe_support_in_i40e_test_plan
pvp_diff_qemu_version_test_plan
pvp_share_lib_test_plan
diff --git a/test_plans/large_vf_test_plan.rst b/test_plans/large_vf_test_plan.rst
index 6399ed12..71e66bf9 100644
--- a/test_plans/large_vf_test_plan.rst
+++ b/test_plans/large_vf_test_plan.rst
@@ -45,7 +45,7 @@ Prerequisites
scapy: http://www.secdev.org/projects/scapy/
3. Copy specific ice package to /lib/firmware/updates/intel/ice/ddp/ice.pkg
- Then reinstall kernel driver.
+ Then reinstall kernel driver.
4. Generate 3 VFs on each PF and set mac address for VF0::
@@ -345,7 +345,7 @@ Fail to start testpmd with "--txq=256 --rxq=256".
Test case: 128 Max VFs + 4 queues (default)
-==========================================
+===========================================
Subcase 1: multi fdir among 4 queues for 128 VFs
------------------------------------------------
diff --git a/test_plans/pipeline_test_plan.rst b/test_plans/pipeline_test_plan.rst
index c492fd62..2b15ab76 100644
--- a/test_plans/pipeline_test_plan.rst
+++ b/test_plans/pipeline_test_plan.rst
@@ -68,7 +68,7 @@ present in the {DTS_SRC_DIR}/dep directory.
Directory Structure of Each Test Case
=====================================
Within {DTS_SRC_DIR}/dep/pipeline.tar.gz, all files related to a particular test case are maintained
-in a separate directory of which the directory structure is shown below:
+in a separate directory of which the directory structure is shown below::
test_case_name [directory]
test_case_name.spec
@@ -79,7 +79,7 @@ in a separate directory of which the directory structure is shown below:
in_x.txt [x: 1-4; depending on test case]
out_x.txt [x: 1-4; depending on test case]
-For an example, files related to mov_001 test case are maintained as shown below:
+For an example, files related to mov_001 test case are maintained as shown below::
mov_001 [directory]
mov_001.spec
diff --git a/test_plans/stats_checks_test_plan.rst b/test_plans/stats_checks_test_plan.rst
index f314ba88..51ec36d7 100644
--- a/test_plans/stats_checks_test_plan.rst
+++ b/test_plans/stats_checks_test_plan.rst
@@ -149,114 +149,114 @@ Test Case: PF xstatus Checks
5. Check stats and xstats::
- testpmd> stop
- Telling cores to stop...
- Waiting for lcores to finish...
+ testpmd> stop
+ Telling cores to stop...
+ Waiting for lcores to finish...
- ------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
- RX-packets: 29 TX-packets: 29 TX-dropped: 0
+ ------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
+ RX-packets: 29 TX-packets: 29 TX-dropped: 0
- ------- Forward Stats for RX Port= 0/Queue= 1 -> TX Port= 1/Queue= 1 -------
- RX-packets: 21 TX-packets: 21 TX-dropped: 0
+ ------- Forward Stats for RX Port= 0/Queue= 1 -> TX Port= 1/Queue= 1 -------
+ RX-packets: 21 TX-packets: 21 TX-dropped: 0
- ------- Forward Stats for RX Port= 0/Queue= 2 -> TX Port= 1/Queue= 2 -------
- RX-packets: 24 TX-packets: 24 TX-dropped: 0
+ ------- Forward Stats for RX Port= 0/Queue= 2 -> TX Port= 1/Queue= 2 -------
+ RX-packets: 24 TX-packets: 24 TX-dropped: 0
- ------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
- RX-packets: 26 TX-packets: 26 TX-dropped: 0
+ ------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
+ RX-packets: 26 TX-packets: 26 TX-dropped: 0
- ---------------------- Forward statistics for port 0 ----------------------
- RX-packets: 100 RX-dropped: 0 RX-total: 100
- TX-packets: 0 TX-dropped: 0 TX-total: 0
- ----------------------------------------------------------------------------
+ ---------------------- Forward statistics for port 0 ----------------------
+ RX-packets: 100 RX-dropped: 0 RX-total: 100
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
- ---------------------- Forward statistics for port 1 ----------------------
- RX-packets: 0 RX-dropped: 0 RX-total: 0
- TX-packets: 100 TX-dropped: 0 TX-total: 100
- ----------------------------------------------------------------------------
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 0 RX-total: 0
+ TX-packets: 100 TX-dropped: 0 TX-total: 100
+ ----------------------------------------------------------------------------
- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
- RX-packets: 100 RX-dropped: 0 RX-total: 100
- TX-packets: 100 TX-dropped: 0 TX-total: 100
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
+ RX-packets: 100 RX-dropped: 0 RX-total: 100
+ TX-packets: 100 TX-dropped: 0 TX-total: 100
+ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- testpmd> show port stats all
+ testpmd> show port stats all
+
+ ######################## NIC statistics for port 0 ########################
+ RX-packets: 100 RX-missed: 0 RX-bytes: 6000
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 0 TX-errors: 0 TX-bytes: 0
+
+ Throughput (since last show)
+ Rx-pps: 0 Rx-bps: 0
+ Tx-pps: 0 Tx-bps: 0
+ ############################################################################
+
+ ######################## NIC statistics for port 1 ########################
+ RX-packets: 0 RX-missed: 0 RX-bytes: 0
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 100 TX-errors: 0 TX-bytes: 6000
+
+ Throughput (since last show)
+ Rx-pps: 0 Rx-bps: 0
+ Tx-pps: 0 Tx-bps: 0
+ ############################################################################
- ######################## NIC statistics for port 0 ########################
- RX-packets: 100 RX-missed: 0 RX-bytes: 6000
- RX-errors: 0
- RX-nombuf: 0
- TX-packets: 0 TX-errors: 0 TX-bytes: 0
-
- Throughput (since last show)
- Rx-pps: 0 Rx-bps: 0
- Tx-pps: 0 Tx-bps: 0
- ############################################################################
-
- ######################## NIC statistics for port 1 ########################
- RX-packets: 0 RX-missed: 0 RX-bytes: 0
- RX-errors: 0
- RX-nombuf: 0
- TX-packets: 100 TX-errors: 0 TX-bytes: 6000
-
- Throughput (since last show)
- Rx-pps: 0 Rx-bps: 0
- Tx-pps: 0 Tx-bps: 0
- ############################################################################
-
- testpmd> show port xstats all
- ###### NIC extended statistics for port 0
- rx_good_packets: 100
- tx_good_packets: 0
- rx_good_bytes: 6000
- tx_good_bytes: 0
- ......
- rx_q0_packets: 0
- rx_q0_bytes: 0
- rx_q0_errors: 0
- rx_q1_packets: 0
- rx_q1_bytes: 0
- rx_q1_errors: 0
- rx_q2_packets: 0
- rx_q2_bytes: 0
- rx_q2_errors: 0
- rx_q3_packets: 0
- rx_q3_bytes: 0
- rx_q3_errors: 0
- tx_q0_packets: 0
- tx_q0_bytes: 0
- tx_q1_packets: 0
- tx_q1_bytes: 0
- tx_q2_packets: 0
- tx_q2_bytes: 0
- tx_q3_packets: 0
- tx_q3_bytes: 0
- ......
- ###### NIC extended statistics for port 1
- rx_good_packets: 0
- tx_good_packets: 100
- rx_good_bytes: 0
- tx_good_bytes: 6000
- rx_q0_packets: 0
- rx_q0_bytes: 0
- rx_q0_errors: 0
- rx_q1_packets: 0
- rx_q1_bytes: 0
- rx_q1_errors: 0
- rx_q2_packets: 0
- rx_q2_bytes: 0
- rx_q2_errors: 0
- rx_q3_packets: 0
- rx_q3_bytes: 0
- rx_q3_errors: 0
- tx_q0_packets: 0
- tx_q0_bytes: 0
- tx_q1_packets: 0
- tx_q1_bytes: 0
- tx_q2_packets: 0
- tx_q2_bytes: 0
- tx_q3_packets: 0
- tx_q3_bytes: 0
+ testpmd> show port xstats all
+ ###### NIC extended statistics for port 0
+ rx_good_packets: 100
+ tx_good_packets: 0
+ rx_good_bytes: 6000
+ tx_good_bytes: 0
+ ......
+ rx_q0_packets: 0
+ rx_q0_bytes: 0
+ rx_q0_errors: 0
+ rx_q1_packets: 0
+ rx_q1_bytes: 0
+ rx_q1_errors: 0
+ rx_q2_packets: 0
+ rx_q2_bytes: 0
+ rx_q2_errors: 0
+ rx_q3_packets: 0
+ rx_q3_bytes: 0
+ rx_q3_errors: 0
+ tx_q0_packets: 0
+ tx_q0_bytes: 0
+ tx_q1_packets: 0
+ tx_q1_bytes: 0
+ tx_q2_packets: 0
+ tx_q2_bytes: 0
+ tx_q3_packets: 0
+ tx_q3_bytes: 0
+ ......
+ ###### NIC extended statistics for port 1
+ rx_good_packets: 0
+ tx_good_packets: 100
+ rx_good_bytes: 0
+ tx_good_bytes: 6000
+ rx_q0_packets: 0
+ rx_q0_bytes: 0
+ rx_q0_errors: 0
+ rx_q1_packets: 0
+ rx_q1_bytes: 0
+ rx_q1_errors: 0
+ rx_q2_packets: 0
+ rx_q2_bytes: 0
+ rx_q2_errors: 0
+ rx_q3_packets: 0
+ rx_q3_bytes: 0
+ rx_q3_errors: 0
+ tx_q0_packets: 0
+ tx_q0_bytes: 0
+ tx_q1_packets: 0
+ tx_q1_bytes: 0
+ tx_q2_packets: 0
+ tx_q2_bytes: 0
+ tx_q3_packets: 0
+ tx_q3_bytes: 0
verify rx_good_packets, RX-packets of port 0 and tx_good_packets, TX-packets of port 1 are both 100.
rx_good_bytes, RX-bytes of port 0 and tx_good_bytes, TX-bytes of port 1 are the same.
diff --git a/test_plans/vhost_cbdma_test_plan.rst b/test_plans/vhost_cbdma_test_plan.rst
index 504b9aa0..bbfa22c1 100644
--- a/test_plans/vhost_cbdma_test_plan.rst
+++ b/test_plans/vhost_cbdma_test_plan.rst
@@ -181,11 +181,11 @@ Test Case2: Dynamic queue number test for DMA-accelerated vhost Tx operations
10. Relaunch vhost with another two cbdma channels and 2 queueus, check perforamnce can get target::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 28-29 \
- --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=2,client=1,dmas=[txq0@00:04.5;txq1@00:04.6],dmathr=512' \
- -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2
- >set fwd mac
- >start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 28-29 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=2,client=1,dmas=[txq0@00:04.5;txq1@00:04.6],dmathr=512' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2
+ >set fwd mac
+ >start
11. Stop vhost port, check vhost RX and TX direction both exist packtes in two queues from vhost log.
diff --git a/test_plans/virtio_smoke_test_plan.rst b/test_plans/virtio_smoke_test_plan.rst
index 66f10805..cc184bf5 100644
--- a/test_plans/virtio_smoke_test_plan.rst
+++ b/test_plans/virtio_smoke_test_plan.rst
@@ -74,7 +74,7 @@ Test Case 1: loopback reconnect test with split ring mergeable path and server m
testpmd>stop
Test Case 2: pvp test with virtio packed ring vectorized path
-============================================================
+=============================================================
1. Bind one port to vfio-pci, then launch vhost by below command::
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index 824cadde..f0107746 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -224,7 +224,7 @@ Test Case 4: Check split ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
@@ -338,18 +338,18 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
10. Quit vhost ports and relaunch vhost ports with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
- testpmd>start
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
11. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
12. Check the iperf performance, ensure queue0 can work from vhost side::
- Under VM1, run: `taskset -c 0 iperf -s -i 1`
- Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `taskset -c 0 iperf -s -i 1`
+ Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
========================================================================================================================
@@ -423,18 +423,18 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
10. Quit vhost ports and relaunch vhost ports with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
- testpmd>start
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
11. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
12. Check the iperf performance, ensure queue0 can work from vhost side::
- Under VM1, run: `taskset -c 0 iperf -s -i 1`
- Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `taskset -c 0 iperf -s -i 1`
+ Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
==========================================================================
--
2.17.1
next reply other threads:[~2020-12-21 10:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-21 9:53 Haiyang Zhao [this message]
2020-12-22 2:56 ` Tu, Lijuan
2021-03-19 2:57 Haiyang Zhao
2021-03-19 9:01 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201221095344.7564-1-haiyangx.zhao@intel.com \
--to=haiyangx.zhao@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).