From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id CA6CBA0567; Wed, 10 Mar 2021 09:45:21 +0100 (CET) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 97AAD4068C; Wed, 10 Mar 2021 09:45:21 +0100 (CET) Received: from mga09.intel.com (mga09.intel.com [134.134.136.24]) by mails.dpdk.org (Postfix) with ESMTP id 2AA9A40687 for ; Wed, 10 Mar 2021 09:45:18 +0100 (CET) IronPort-SDR: Iq1K3wAwHDXgI+y2PxMX1zO7hCir8uhNJoClT2KWt0RJjfA3tWlM15NrTiez4AuK4YDedoDH56 xl3WsF5xu6rQ== X-IronPort-AV: E=McAfee;i="6000,8403,9917"; a="188517577" X-IronPort-AV: E=Sophos;i="5.81,237,1610438400"; d="scan'208";a="188517577" Received: from fmsmga005.fm.intel.com ([10.253.24.32]) by orsmga102.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 10 Mar 2021 00:45:17 -0800 IronPort-SDR: YfOv7UC7ZiW/G+/F2cWiHqLLFwnQbngAA+DV3xf/UFuAPpuBnBIx8huPUH3Lwn7IRAopS/w2T8 cO/3/Kaw30wg== X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.81,237,1610438400"; d="scan'208";a="602999520" Received: from unknown (HELO dpdk-qifu-CXL.sh.intel.com) ([10.67.119.10]) by fmsmga005.fm.intel.com with ESMTP; 10 Mar 2021 00:45:15 -0800 From: qifu To: dts@dpdk.org Cc: qifu Date: Wed, 10 Mar 2021 12:28:45 -0500 Message-Id: <20210310172845.396600-1-qi.fu@intel.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Subject: [dts] [PATCH V2]test_plans/cvl_qinq: add dst mac test cases for qinq dcf switch filter X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org Sender: "dts" add dst mac input set test cases for qinq DCF switch filter. Signed-off-by: qifu --- test_plans/cvl_qinq_test_plan.rst | 159 +++++++++++++++++++++++++++--- 1 file changed, 144 insertions(+), 15 deletions(-) diff --git a/test_plans/cvl_qinq_test_plan.rst b/test_plans/cvl_qinq_test_plan.rst index e253a83e..beed340b 100644 --- a/test_plans/cvl_qinq_test_plan.rst +++ b/test_plans/cvl_qinq_test_plan.rst @@ -164,6 +164,37 @@ DCF switch filter support pattern and input set Test case 01: DCF switch for MAC_QINQ_IPV4_PAY ============================================== +subcase: dest mac +----------------- +1. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions vf id 1 / end + testpmd> flow list 0 + + check the rule exists in the list. + +2. send matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)], iface="ens786f0") + + check port 1 receive the packet. + send mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6()/("X"*480)], iface="ens786f0") + + check the packets are not to port 1. + +3. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 0 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets in step 2, check the packets are not to port 1. + subcase: src ip --------------- 1. create a rule:: @@ -229,6 +260,37 @@ subcase: dst ip Test case 02: DCF switch for MAC_QINQ_IPV6_PAY ============================================== +subcase: dest mac +----------------- +1. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions vf id 1 / end + testpmd> flow list 0 + + check the rule exists in the list. + +2. send matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6()/("X"*480)], iface="ens786f0") + + check port 1 receive the packet. + send mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)], iface="ens786f0") + + check the packets are not to port 1. + +3. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 0 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets in step 2, check the packets are not to port 1. + subcase: src ip --------------- 1. create a rule:: @@ -297,25 +359,27 @@ Test case 03: DCF switch for MAC_QINQ_PPPOE_PAY 1. create a rule:: - testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions vf id 1 / end + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions vf id 1 / end testpmd> flow list 0 check the rule exists in the list. 2. send matched packets:: - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") check port 1 receive the packet. send mismatched packets:: - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") check the packets are not to port 1. @@ -333,22 +397,23 @@ Test case 04: DCF switch for MAC_QINQ_PPPOE_PAY_Proto 1. create a rule:: - testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end testpmd> flow list 0 check the rule exists in the list. 2. send matched packets:: - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") check port 1 receive the packet. send mismatched packets:: - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") - sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)], iface="ens786f0") check the packets are not to port 1. @@ -363,6 +428,38 @@ Test case 04: DCF switch for MAC_QINQ_PPPOE_PAY_Proto Test case 05: DCF switch for MAC_QINQ_PPPOE_IPV4 ================================================ +subcase: dest mac +----------------- +1. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions vf id 1 / end + testpmd> flow list 0 + + check the rule exists in the list. + +2. send matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)], iface="ens786f0") + + check port 1 receive the packet. + send mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IPv6()/UDP(dport=23)/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)], iface="ens786f0") + + check the packets are not to port 1. + +3. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 0 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets in step 2, check the packets are not to port 1. + subcase: src ip --------------- 1. create a rule:: @@ -430,6 +527,38 @@ subcase: dst ip Test case 06: DCF switch for MAC_QINQ_PPPOE_IPV6 ================================================ +subcase: dest mac +----------------- +1. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions vf id 1 / end + testpmd> flow list 0 + + check the rule exists in the list. + +2. send matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)], iface="ens786f0") + + check port 1 receive the packet. + send mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IP()/UDP(dport=23)/("X"*480)], iface="ens786f0") + sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)], iface="ens786f0") + + check the packets are not to port 1. + +3. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 0 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets in step 2, check the packets are not to port 1. + subcase: src ip --------------- 1. create a rule:: -- 2.25.1