From: xiewei <weix.xie@intel.com>
To: dts@dpdk.org
Cc: xiewei <weix.xie@intel.com>
Subject: [dts] [PATCH V1] tests/cvl_vf_support_multicast_address: add vlan packet check
Date: Thu, 11 Mar 2021 23:38:05 +0800 [thread overview]
Message-ID: <20210311153805.1297-1-weix.xie@intel.com> (raw)
a) add vlan packet check when set allmulti on
b) add a new test case: add vlan filter check when set allmulti off and configured multicast address
Signed-off-by: xiewei <weix.xie@intel.com>
---
...tSuite_cvl_vf_support_multicast_address.py | 75 ++++++++++++++++---
1 file changed, 63 insertions(+), 12 deletions(-)
diff --git a/tests/TestSuite_cvl_vf_support_multicast_address.py b/tests/TestSuite_cvl_vf_support_multicast_address.py
index 1b148c6c..dd241a82 100644
--- a/tests/TestSuite_cvl_vf_support_multicast_address.py
+++ b/tests/TestSuite_cvl_vf_support_multicast_address.py
@@ -393,21 +393,23 @@ class TestCvlVfSupportMulticastAdress(TestCase):
# send 5 packets
pkt1 = 'Ether(dst="%s")/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0
- pkt2 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1
- pkt3 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_mac
- pkt4 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf1_mac
- pkt5 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_wrong_mac
- pkts = [pkt1, pkt2, pkt3, pkt4, pkt5]
+ pkt2 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0
+ pkt3 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1
+ pkt4 = 'Ether(dst="%s")/Dot1Q(vlan=2)/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1
+ pkt5 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_mac
+ pkt6 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf1_mac
+ pkt7 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_wrong_mac
+ pkts = [pkt1, pkt2, pkt3, pkt4, pkt5, pkt6, pkt7]
p = Packet()
for i in pkts:
p.append_pkt(i)
p.send_pkt(self.tester, tx_port=self.tester_itf)
output_1 = self.check_pkts_received()
- self.verify(len(output_1) == 6, "Wrong number of pkts received")
- self.verify(('0', vf0_mac) in output_1, "pkt3 can't be received by port 0")
- self.verify(('1', vf1_mac) in output_1, "pkt4 can't be received by port 1")
- self.verify(('0', mul_mac_0) in output_1 and ('0', mul_mac_1) in output_1, "pkt1-2 can't be received by port 0")
- self.verify(('1', mul_mac_0) in output_1 and ('1', mul_mac_1) in output_1, "pkt1-2 can't be received by port 1")
+ self.verify(len(output_1) == 10, "Wrong number of pkts received")
+ self.verify(('0', vf0_mac) in output_1, "pkt5 can't be received by port 0")
+ self.verify(('1', vf1_mac) in output_1, "pkt6 can't be received by port 1")
+ self.verify(('0', mul_mac_0) in output_1 and ('0', mul_mac_1) in output_1, "pkt1-4 can't be received by port 0")
+ self.verify(('1', mul_mac_0) in output_1 and ('1', mul_mac_1) in output_1, "pkt1-4 can't be received by port 1")
# set allmulti off and promisc on
self.pmd_output.execute_cmd("set promisc all on")
@@ -416,8 +418,8 @@ class TestCvlVfSupportMulticastAdress(TestCase):
p.send_pkt(self.tester, tx_port=self.tester_itf)
output_2 = self.check_pkts_received()
self.verify(len(output_2) == 6, "Wrong number of pkts received")
- self.verify(('0', vf0_mac) in output_2 and ('0', vf1_mac) in output_2 and ('0', vf0_wrong_mac) in output_2, "pkt3-5 can't be received by port 0")
- self.verify(('1', vf0_mac) in output_2 and ('1', vf1_mac) in output_2 and ('1', vf0_wrong_mac) in output_2, "pkt3-5 can't be received by port 1")
+ self.verify(('0', vf0_mac) in output_2 and ('0', vf1_mac) in output_2 and ('0', vf0_wrong_mac) in output_2, "pkt5-7 can't be received by port 0")
+ self.verify(('1', vf0_mac) in output_2 and ('1', vf1_mac) in output_2 and ('1', vf0_wrong_mac) in output_2, "pkt5-7 can't be received by port 1")
def test_negative_case(self):
# send one packet
@@ -469,6 +471,55 @@ class TestCvlVfSupportMulticastAdress(TestCase):
output_6 = self.check_pkts_received()
self.verify(len(output_6) == 0, "Wrong number of pkts received")
+ def test_set_vlan_filter_on(self):
+ # send 4 packets
+ pkt1 = 'Ether(dst="%s")/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0
+ pkt2 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0
+ pkt3 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1
+ pkt4 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf)
+ out_1 = self.check_pkts_received()
+ self.verify(len(out_1) == 0, "pkt1-4 can be received by any port")
+
+ # configure multicast address
+ self.pmd_output.execute_cmd("mcast_addr add 0 %s" % mul_mac_0)
+ self.check_ports_multicast_address_number(1, 0)
+ # send 4 packets
+ p.send_pkt(self.tester, tx_port=self.tester_itf)
+ out_2 = self.check_pkts_received()
+ self.verify(len(out_2) == 1, "Wrong number of pkts received")
+ self.verify(('0', mul_mac_0) in out_2, "pkt1 can't be received by port 0")
+
+ # set vlan filter on
+ self.pmd_output.execute_cmd("vlan set filter on 0")
+ self.pmd_output.execute_cmd("rx_vlan add 1 0")
+ # send 4 packets
+ p.send_pkt(self.tester, tx_port=self.tester_itf)
+ out_3 = self.check_pkts_received()
+ self.verify(len(out_3) == 2, "Wrong number of pkts received")
+ self.verify(('0', mul_mac_0) in out_3, "pkt1-2 can't be received by port 0")
+ self.verify(('0', mul_mac_1) not in out_3, "other pkt can be received by port 0")
+
+ # remove the vlan filter
+ self.pmd_output.execute_cmd("rx_vlan rm 1 0")
+ # send 4 packets
+ p.send_pkt(self.tester, tx_port=self.tester_itf)
+ out_4 = self.check_pkts_received()
+ self.verify(len(out_4) == 1, "Wrong number of pkts received")
+ self.verify(('0', mul_mac_0) in out_4, "pkt1 can't be received by port 0")
+
+ # remove the multicast address configuration
+ self.pmd_output.execute_cmd("mcast_addr remove 0 %s" % mul_mac_0)
+ self.check_ports_multicast_address_number(0, 0)
+ # send 4 packets
+ p.send_pkt(self.tester, tx_port=self.tester_itf)
+ out_5 = self.check_pkts_received()
+ self.verify(len(out_5) == 0, "pkt1-4 can be received by any port")
+
def tear_down(self):
"""
Run after each test case.
--
2.17.1
next reply other threads:[~2021-03-11 7:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 15:38 xiewei [this message]
2021-03-11 7:14 ` Xie, WeiX
2021-03-12 8:46 ` Peng, Yuan
2021-03-15 7:15 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210311153805.1297-1-weix.xie@intel.com \
--to=weix.xie@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).