* [dts] [PATCH 0/2] split the pppoe cases
@ 2021-03-17 10:58 xiewei
2021-03-17 10:58 ` [dts] [PATCH 1/2] test_plans/cvl_switch_filter_test_plan: " xiewei
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: xiewei @ 2021-03-17 10:58 UTC (permalink / raw)
To: dts; +Cc: xiewei
1.remove cvl_switch_filter_test_plan pppoe part.
2.add cvl_switch_filter_pppoe_test_plan for pppoe cases.
xiewei (2):
test_plans/cvl_switch_filter_test_plan: split the pppoe cases
test_plans/cvl_switch_filter_pppoe_test_plan: add new test plan
.../cvl_switch_filter_pppoe_test_plan.rst | 5720 +++++++++++++++++
test_plans/cvl_switch_filter_test_plan.rst | 5618 +---------------
2 files changed, 5733 insertions(+), 5605 deletions(-)
create mode 100644 test_plans/cvl_switch_filter_pppoe_test_plan.rst
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH 1/2] test_plans/cvl_switch_filter_test_plan: split the pppoe cases
2021-03-17 10:58 [dts] [PATCH 0/2] split the pppoe cases xiewei
@ 2021-03-17 10:58 ` xiewei
2021-03-17 10:58 ` [dts] [PATCH 2/2] test_plans/cvl_switch_filter_pppoe_test_plan: add new test plan xiewei
2021-03-19 8:59 ` [dts] [PATCH 0/2] split the pppoe cases Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: xiewei @ 2021-03-17 10:58 UTC (permalink / raw)
To: dts; +Cc: xiewei
remove cvl_switch_filter_test_plan pppoe cases.
Signed-off-by: xiewei <weix.xie@intel.com>
---
test_plans/cvl_switch_filter_test_plan.rst | 5618 +-------------------
1 file changed, 13 insertions(+), 5605 deletions(-)
diff --git a/test_plans/cvl_switch_filter_test_plan.rst b/test_plans/cvl_switch_filter_test_plan.rst
index 9cd1f760..b8f7e147 100644
--- a/test_plans/cvl_switch_filter_test_plan.rst
+++ b/test_plans/cvl_switch_filter_test_plan.rst
@@ -41,7 +41,6 @@ This document provides the plan for testing switch filter feature of CVL, includ
* Enable switch filter for IPv4/IPv6 + TCP/UDP in non-pipeline/pipeline mode (comm #1 package)
* Enable switch filter for tunnel : VXLAN / NVGRE in non-pipeline/pipeline mode (comm #1 package)
-* Enable switch filter for PPPOE in non-pipeline/pipeline mode (comm #1 package)
In pipeline mode, a flow can be set at one specific stage by setting parameter ``priority``. Currently,
we support two stages: priority = 0 or !0. Flows with priority 0 located at the first pipeline stage
@@ -124,87 +123,6 @@ Pattern and input set
| | | [Inner Source Port], [Inner Dest Port] | |
+---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+
| ethertype filter | ethertype filter_PPPOED | [Ether type] | [Ether type] |
- | | ethertype filter_PPPOES | | |
- +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV4_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], |
- | | _session_id_proto_id | [pppoe_proto_id] | [pppoe_proto_id] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV6_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], |
- | | _session_id_proto_id | [pppoe_proto_id] | [pppoe_proto_id] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV4_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] |
- | | _proto_id | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV6_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] |
- | | _proto_id | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV4_PAY_IP_address | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV4_UDP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
- | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV4_UDP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
- | | _non_src_dst_port | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV4_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
- | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV4_TCP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
- | | _non_src_dst_port | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV6_PAY_IP_address | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
- | PPPOES +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV6_UDP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
- | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV6_UDP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
- | | _non_src_dst_port | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV6_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
- | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPV6_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
- | | _non_src_dst_port | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV4_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | _IP_address | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV4_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV4_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | _non_src_dst_port | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV4_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV4_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | _non_src_dst_port | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV6_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | _IP_address | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV6_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV6_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | _non_src_dst_port | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV6_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPV6_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
- | | _non_src_dst_port | | |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_LCP_PAY | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_PPPOE_IPCP_PAY | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_LCP_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], |
- | | | [pppoe_proto_id] | [pppoe_proto_id] |
- | +-------------------------------+-------------------------------------------+-------------------------------------------+
- | | MAC_VLAN_PPPOE_IPCP_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], |
- | | | [pppoe_proto_id] | [pppoe_proto_id] |
+---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+
.. note::
@@ -5442,5536 +5360,26 @@ drop action
repeat step 1-4 to check the pattern in pipeline mode.
-Ethertype filter_PPPOES
------------------------
-
-create PPPOE rule to enable RSS for PPPOE packets::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55", type=0x8864)/PPPoE(sessionid=3)/Raw("x" *80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55", type=0x8863)/PPPoED()/Raw("x" *80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 4 or 5.
- send mismatched packets, check the packets are not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 0
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id
-======================================================
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x"*80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
----------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+Test case: unsupported patterns in os default package
+=====================================================
- get the message::
-
- Succeeded to create (2) flow
+1. load os default package and launch testpmd in pipeline mode as step 3-6 in Prerequisites.
- check the flow list::
+2. create unsupported patterns in os default package::
- testpmd> flow list 0
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp / gtpu teid is 0x12345678 / gtp_psc qfi is 0x34 / end actions drop / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / l2tpv3oip session_id is 17 / end actions rss queues 2 3 end / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 / udp / esp spi is 8 / end actions rss queues 2 3 end / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / ah spi is 1 / end actions queue index 1 / end
- check the rule exists in the list.
+ Failed to create flow, report message::
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
+ Invalid input pattern: Invalid argument
-4. verify rules can be destroyed::
+3. check the rule list::
- testpmd> flow destroy 0 rule 15360
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
----------------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 4 or 5.
- send mismatched packets, check the packets are not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id
-======================================================
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
----------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-----------------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 4 or 5.
- send mismatched packets, check the packets are not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id
-=================================================
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
----------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
----------------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 4 or 5.
- send mismatched packets, check the packets are not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id
-=================================================
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
----------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packet are distributed to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
----------------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packet to queue 4 or 5.
- send mismatched packets, check the packet not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
------------
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packet is dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Test case: PPPoE data
-=====================
-
-Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address
-----------------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 2: MAC_PPPOE_IPV4_UDP_PAY
----------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 7 or 8.
- send mismatched packets, check the packets are not to queue 7 and 8.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 7 and 8.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port
---------------------------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 4: MAC_PPPOE_IPV4_TCP_PAY
----------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 7 or 8.
- send mismatched packets, check the packets are not to queue 7 and 8.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 7 and 8.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port
---------------------------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 7 or 8.
- send mismatched packets, check the packets are not to queue 7 and 8.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 7 and 8.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address
-----------------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/Raw("x"*80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 7: MAC_PPPOE_IPV6_UDP_PAY
----------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 4 or 5.
- send mismatched packets, check the packets are not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port
---------------------------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 9: MAC_PPPOE_IPV6_TCP_PAY
----------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 4 or 5.
- send mismatched packets, check the packets are not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port
----------------------------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address
-----------------------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY
----------------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- create a rule::
-
- flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 7 or 8.
- send mismatched packets, check the packets are not to queue 7 and 8.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 7 and 8.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port
---------------------------------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 7 or 8.
- send mismatched packets, check the packets are not to queue 7 and 8.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 7 and 8.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY
----------------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 7 or 8.
- send mismatched packets, check the packets are not to queue 7 and 8.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 7 and 8.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port
---------------------------------------------------------
-
-matched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2.
- send mismatched packets, check the packets are not to queue 2.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 7 or 8.
- send mismatched packets, check the packets are not to queue 7 and 8.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 7 and 8.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address
-----------------------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY
----------------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 4 or 5.
- send mismatched packets, check the packets are not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port
---------------------------------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY
----------------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 4 or 5.
- send mismatched packets, check the packets are not to queue 4 and 5.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 4 and 5.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port
---------------------------------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Test case: PPPoE Control
-========================
-
-create a PPPOE rule to enable RSS for PPPOE_control packets::
-
- testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end
-
-Subcase 1: MAC_PPPOE_LCP_PAY
-----------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow destroy 0 rule 15361
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 2: MAC_PPPOE_IPCP_PAY
------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow destroy 0 rule 15361
- testpmd> flow list 0
-
- check the rules not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 3: MAC_VLAN_PPPOE_LCP_PAY
----------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow destroy 0 rule 15361
- testpmd> flow list 0
-
- check the rules not exist in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY
-----------------------------------
-
-matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
-
-to queue action
-................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 1.
- send mismatched packets, check the packets are not to queue 1.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-to queue group action
-......................
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are to queue 2 or 3.
- send mismatched packets, check the packets are not to queue 2 and 3.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow destroy 0 rule 15361
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 2 and 3.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-drop action
-............
-
-1. validate a rule::
-
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
-
- get the message::
-
- Flow rule validated
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-2. create a rule::
-
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
-
- get the message::
-
- Succeeded to create (2) flow
-
- check the flow list::
-
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-3. send matched packets, check the packets are dropped.
- send mismatched packets, check the packets are not dropped.
-
-4. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not dropped.
-
-5. check the pattern in pipeline mode
-
- validate a rule::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
-
- create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
-
- repeat step 1-4 to check the pattern in pipeline mode.
-
-Test case: negative cases
-=========================
-Note: some of the error messages may be differernt.
-
-Subcase 1: invalid parameters of queue index
---------------------------------------------
-
-1. create a rule with invalid queue index::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end
-
- Failed to create flow, report message::
-
- Invalid action type or queue number: Invalid argument
-
-2. check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-Subcase 2: invalid parameters of rss queues
--------------------------------------------
-
-1. Invalid number of queues::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end
-
- Failed to create flow, report messag::
-
- Invalid action type or queue number: Invalid argument
-
-2. Discontinuous queues::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end
-
- Failed to create flow, report message::
-
- Discontinuous queue region: Invalid argument
-
-3. Invalid queue index::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end
-
- Failed to create flow, report message::
-
- Invalid queue region indexes: Invalid argument
-
-4. set queue group 17 queues::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 end / end
-
- Failed to create flow, report message::
-
- Invalid action type or queue number: Invalid argument
-
-5. check the flow list::
-
- testpmd> flow list 0
-
- check the rules not exist in the list.
-
-Subcase 3: unsupported patterns in os default package
------------------------------------------------------
-
-1. load os default package and launch testpmd in pipeline mode as step 3-6 in Prerequisites.
-
-2. create unsupported patterns in os default package::
-
- testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 1 / end
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp / gtpu teid is 0x12345678 / gtp_psc qfi is 0x34 / end actions drop / end
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 1 / end
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / l2tpv3oip session_id is 17 / end actions rss queues 2 3 end / end
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 / udp / esp spi is 8 / end actions rss queues 2 3 end / end
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / ah spi is 1 / end actions queue index 1 / end
-
- Failed to create flow, report message::
-
- Invalid input pattern: Invalid argument
-
-3. check the rule list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-Subcase 4: unsupported input set
---------------------------------
-
-1. create an nvgre rule with unsupported input set field [inner tos]::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end
-
-2. Failed to create flow, report message::
-
- Invalid input set: Invalid argument
-
-3. check the rule list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-Subcase 5: duplicated rules
----------------------------
-
-1. create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-2. create the same rule again, Failed to create flow, report message::
-
- switch filter create flow fail: Invalid argument
-
-3. check the flow list::
-
- testpmd> flow list 0
-
- check only the first rule exists in the list.
-
-Subcase 6: conflicted rules
----------------------------
-
-1. create a rule::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-2. create a rule with same input set but different actions::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 2 / end
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions drop / end
-
- Failed to create the two rules, report message::
-
- switch filter create flow fail: Invalid argument
-
-3. check the flow list::
-
- testpmd> flow list 0
-
- check only the first rule exists in the list.
-
-Subcase 7: multiple actions
----------------------------
-
-1. create a rule with two conflicted actions::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end
-
- Failed to create flow, report message::
-
- Invalid input action number: Invalid argument
-
-2. check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-Subcase 8: void action
-----------------------
-
-1. create a rule with void action::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end
-
- Failed to create flow, report message::
-
- NULL action.: Invalid argument
-
-2. check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-Subcase 9: unsupported action
------------------------------
-
-1. create a rule with void action::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end
-
- Failed to create flow, report message::
-
- Invalid action type: Invalid argument
-
-2. check the flow list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-Subcase 10: delete a non-existing rule
---------------------------------------
-
-1. check the rule list::
-
- testpmd> flow list 0
-
- check no switch filter rule exists in the list.
-
-2. destroy the rule 20000::
-
- testpmd> flow destroy 0 rule 20000
-
- check no error reports.
-
-Subcase 11: add long switch rule
---------------------------------
-
-Description: A recipe has 5 words, one of which is reserved for switch ID,
-so a recipe can use 4 words, and a maximum of 5 recipes can be chained,
-one of which is reserved. Therefore, a rule can use up to 4*4*2 = 32 bytes.
-This case is used to test that a rule whose input set is longer than 32
-bytes can not be created successfully, and will not affect the creation of
-other rules.
-
-1. create a rule with input set length longer than 32 bytes::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- Failed to create flow, report message::
-
- Invalid input set: Invalid argument
-
-2. check the rule list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-3. create a MAC_PPPOE_IPV6_UDP_PAY rule with to queue action::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
- testpmd> flow list 0
-
- check the rule exists in the list.
-
-4. send matched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
-
- check queue 1 receive the packet.
- send mismatched packets::
-
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
-
- check the packets are not to queue 1.
-
-5. verify rules can be destroyed::
-
- testpmd> flow destroy 0 rule 15360
- testpmd> flow list 0
-
- check the rule not exists in the list.
- send matched packets, check the packets are not to queue 1.
-
-Subcase 12: void input set value
---------------------------------
-
-1. create a IPV4_PAY rule with void input set value::
-
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end
-
- Failed to create flow, report message::
-
- Invalid input set: Invalid argument
-
-2. check the rule list::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
-
-Subcase 13: invalid port
-------------------------
-
-1. create a rule with invalid port::
-
- testpmd> flow create 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
-
- Failed to create flow, report message::
-
- No such device: No such device
-
-2. check the rule list on port 0::
-
- testpmd> flow list 0
-
- check the rule not exists in the list.
- check on port 1::
-
- testpmd> flow list 1
-
- get the message::
-
- Invalid port 1
-
-Test case: negative validation
-==============================
-Note: some of the error messages may be different.
-
-1. invalid parameters of queue index
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end
-
- get the error message::
-
- Invalid action type or queue number: Invalid argument
-
-2. invalid parameters of rss queues
-
- Invalid number of queues::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end
-
- get the error message::
-
- Invalid action type or queue number: Invalid argument
-
- Discontinuous queues::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end
-
- get the error message::
-
- Discontinuous queue region: Invalid argument
-
- Invalid rss queues index::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end
-
- get the error message::
-
- Invalid queue region indexes: Invalid argument
-
-3. unsupported pattern in os default package::
-
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 1 / end
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp / gtpu teid is 0x12345678 / gtp_psc qfi is 0x34 / end actions drop / end
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 1 / end
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / l2tpv3oip session_id is 17 / end actions rss queues 2 3 end / end
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv6 / udp / esp spi is 8 / end actions rss queues 2 3 end / end
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / ah spi is 1 / end actions queue index 1 / end
-
- get the error message::
-
- Invalid input pattern: Invalid argument
-
-4. unsupported input set
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end
-
- get the error message::
-
- Invalid input set: Invalid argument
-
-5. multiple actions
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end
-
- get the error message::
-
- Invalid input action number: Invalid argument
-
-6. void action
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end
-
- get the error message::
-
- NULL action.: Invalid argument
-
-7. unsupported action
-
- testpmd> flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end
-
- get the error message::
-
- Invalid action type: Invalid argument
-
-8. long switch rule
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
-
- get the error message::
-
- Invalid input set: Invalid argument
-
-9. void input set value
-
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end
-
- get the error message::
-
- Invalid input set: Invalid argument
-
-10. invalid port
-
- testpmd> flow validate 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
-
- get the error message::
-
- No such device: No such device
-
-11. check the rule list::
-
- testpmd> flow list 0
-
- no rule exists in the list.
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH 2/2] test_plans/cvl_switch_filter_pppoe_test_plan: add new test plan
2021-03-17 10:58 [dts] [PATCH 0/2] split the pppoe cases xiewei
2021-03-17 10:58 ` [dts] [PATCH 1/2] test_plans/cvl_switch_filter_test_plan: " xiewei
@ 2021-03-17 10:58 ` xiewei
2021-03-19 8:59 ` [dts] [PATCH 0/2] split the pppoe cases Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: xiewei @ 2021-03-17 10:58 UTC (permalink / raw)
To: dts; +Cc: xiewei
add new test plan for cvl swicth filter pppoe cases.
Signed-off-by: xiewei <weix.xie@intel.com>
---
.../cvl_switch_filter_pppoe_test_plan.rst | 5720 +++++++++++++++++
1 file changed, 5720 insertions(+)
create mode 100644 test_plans/cvl_switch_filter_pppoe_test_plan.rst
diff --git a/test_plans/cvl_switch_filter_pppoe_test_plan.rst b/test_plans/cvl_switch_filter_pppoe_test_plan.rst
new file mode 100644
index 00000000..a2854276
--- /dev/null
+++ b/test_plans/cvl_switch_filter_pppoe_test_plan.rst
@@ -0,0 +1,5720 @@
+.. Copyright (c) <2019-2020>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=======================
+CVL Switch Filter Tests
+=======================
+
+Description
+===========
+
+This document provides the plan for testing switch filter feature of CVL, including:
+
+* Enable switch filter for PPPOE in non-pipeline/pipeline mode (comm #1 package)
+
+In pipeline mode, a flow can be set at one specific stage by setting parameter ``priority``. Currently,
+we support two stages: priority = 0 or !0. Flows with priority 0 located at the first pipeline stage
+which typically be used as a firewall. At this stage, flow rules are created for the device's exact
+match engine: switch. Flows with priority !0 located at the second stage, typically packets are
+classified here and be steered to specific queue or queue group. At this stage, flow rules are created
+for device's flow director engine.
+
+In non-pipeline mode, ``priority`` is ignored, a flow rule can be created as a flow director rule or a
+switch rule depends on its pattern/action. If a rule is supported by switch or fdir at the same time, it
+will be created in the fdir table first. Therefore, to test switch filter in non-pipeline mode, we need to
+fill the fdir table first, and then the rules are created in the switch filter table. The capacity of fdir
+table is 16K, of which 14K is shared by all pfs and vfs, and the remaining 2K is gurantee for pfs. If 4*25G
+NIC, the gurantee for each pf is 512. If 2*100G NIC, the gurantee of each pf is 1024. so 1 pf can create at
+most 14848 rules on 4 ports card and 15360 rules on 2 ports card.
+
+Pattern and input set
+---------------------
+
+ +---------------------+-------------------------------+---------------------------------------------------------------------------------------+
+ | | | Input Set |
+ | Packet Types | Pattern +-------------------------------------------+-------------------------------------------+
+ | | | non-pipeline mode | pipeline mode |
+ +=====================+===============================+===========================================+===========================================+
+ | ethertype filter | ethertype filter_PPPOES | [Ether type] | [Ether type] |
+ +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV4_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], |
+ | | _session_id_proto_id | [pppoe_proto_id] | [pppoe_proto_id] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV6_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], |
+ | | _session_id_proto_id | [pppoe_proto_id] | [pppoe_proto_id] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV4_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] |
+ | | _proto_id | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV6_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] |
+ | | _proto_id | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV4_PAY_IP_address | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV4_UDP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
+ | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV4_UDP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
+ | | _non_src_dst_port | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV4_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
+ | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV4_TCP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
+ | | _non_src_dst_port | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV6_PAY_IP_address | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
+ | PPPOES +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV6_UDP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
+ | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV6_UDP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] |
+ | | _non_src_dst_port | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV6_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
+ | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPV6_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], |
+ | | _non_src_dst_port | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV4_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | _IP_address | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV4_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV4_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | _non_src_dst_port | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV4_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV4_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | _non_src_dst_port | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV6_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | _IP_address | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV6_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV6_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | _non_src_dst_port | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV6_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPV6_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] |
+ | | _non_src_dst_port | | |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_LCP_PAY | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_PPPOE_IPCP_PAY | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_LCP_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], |
+ | | | [pppoe_proto_id] | [pppoe_proto_id] |
+ | +-------------------------------+-------------------------------------------+-------------------------------------------+
+ | | MAC_VLAN_PPPOE_IPCP_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], |
+ | | | [pppoe_proto_id] | [pppoe_proto_id] |
+ +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+
+
+.. note::
+
+ 1. The maximum input set length of a switch rule is 32 bytes, and src ipv6,
+ dst ipv6 account for 32 bytes. Therefore, for ipv6 cases, if need to test
+ fields other than src, dst ip, we create rule by removing src or dst ip in
+ the test plan.
+
+ 2. For MAC_IPV4_TUN_IPV4_FRAG/MAC_IPV4_TUN_IPV4_PAY cases and
+ MAC_IPV4_TUN_MAC_IPV4_FRAG/MAC_IPV4_TUN_MAC_IPV4_PAY cases, the input set
+ of each pair is the same, so use MAC_IPV4_TUN_IPV4 and MAC_IPV4_TUN_MAC_IPV4
+ pattern to replace them in the test plan.
+
+Supported function type
+-----------------------
+
+* validate
+* create
+* destroy
+* flush
+* list
+
+Supported action type
+---------------------
+
+* to queue
+* to queue group
+* drop
+
+Prerequisites
+=============
+
+1. Hardware:
+ columbiaville_25g/columbiaville_100g
+ design the cases with 2 ports card.
+
+2. software:
+
+ - dpdk: http://dpdk.org/git/dpdk
+ - scapy: http://www.secdev.org/projects/scapy/
+
+3. Copy comm #1 package to /lib/firmware/intel/ice/ddp/ice.pkg,
+ then load driver::
+
+ rmmod ice
+ insmod ice.ko
+
+4. Compile DPDK::
+
+ make -j install T=x86_64-native-linuxapp-gcc
+
+5. Bind pf to dpdk driver::
+
+ ./usertools/dpdk-devbind.py -b vfio-pci 18:00.2
+
+6. Launch dpdk with the following arguments in non-pipeline mode::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 --log-level="ice,8" -- -i --txq=16 --rxq=16 --cmdline-file=testpmd_fdir_rules
+ testpmd> port config 0 rss-hash-key ipv4 1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+ If set VXLAN flow rule::
+
+ testpmd> rx_vxlan_port add 4789 0
+
+ Note: file ``testpmd_fdir_rules`` contains 15,360 fdir rules to make fdir table full.
+
+ Launch dpdk in pipeline mode with the following testpmd command line::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0,pipeline-mode-support=1 --log-level="ice,8" -- -i --txq=16 --rxq=16
+
+Test case: Ethertype filter
+===========================
+
+Ethertype filter_PPPOES
+-----------------------
+
+create PPPOE rule to enable RSS for PPPOE packets::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", type=0x8864)/PPPoE(sessionid=3)/Raw("x" *80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", type=0x8863)/PPPoED()/Raw("x" *80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+ send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id
+======================================================
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+---------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+---------------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+ send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+-----------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id
+======================================================
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+---------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+----------------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+ send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+-----------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id
+=================================================
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+---------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+---------------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+ send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id
+=================================================
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+---------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packet are distributed to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+---------------------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packet to queue 4 or 5.
+ send mismatched packets, check the packet not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+-----------
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packet is dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: PPPoE data
+=====================
+
+Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address
+----------------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 2: MAC_PPPOE_IPV4_UDP_PAY
+---------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+ send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port
+--------------------------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 4: MAC_PPPOE_IPV4_TCP_PAY
+---------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+ send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port
+--------------------------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+ send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address
+----------------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/Raw("x"*80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 7: MAC_PPPOE_IPV6_UDP_PAY
+---------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+ send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port
+--------------------------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 9: MAC_PPPOE_IPV6_TCP_PAY
+---------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+ send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port
+---------------------------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address
+----------------------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY
+---------------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ create a rule::
+
+ flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+ send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port
+--------------------------------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+ send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY
+---------------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+ send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port
+--------------------------------------------------------
+
+matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+ send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+ send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address
+----------------------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY
+---------------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+ send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port
+--------------------------------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY
+---------------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+ send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port
+--------------------------------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: PPPoE Control
+========================
+
+create a PPPOE rule to enable RSS for PPPOE_control packets::
+
+ testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end
+
+Subcase 1: MAC_PPPOE_LCP_PAY
+----------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow destroy 0 rule 15361
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 2: MAC_PPPOE_IPCP_PAY
+-----------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow destroy 0 rule 15361
+ testpmd> flow list 0
+
+ check the rules not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 3: MAC_VLAN_PPPOE_LCP_PAY
+---------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow destroy 0 rule 15361
+ testpmd> flow list 0
+
+ check the rules not exist in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY
+----------------------------------
+
+matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+ send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+ send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow destroy 0 rule 15361
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+ get the message::
+
+ Flow rule validated
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+2. create a rule::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+ get the message::
+
+ Succeeded to create (2) flow
+
+ check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+ send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+ validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+ create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+ repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: negative cases
+=========================
+Note: some of the error messages may be differernt.
+
+Subcase 1: invalid parameters of queue index
+--------------------------------------------
+
+1. create a rule with invalid queue index::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end
+
+ Failed to create flow, report message::
+
+ Invalid action type or queue number: Invalid argument
+
+2. check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+Subcase 2: invalid parameters of rss queues
+-------------------------------------------
+
+1. Invalid number of queues::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end
+
+ Failed to create flow, report messag::
+
+ Invalid action type or queue number: Invalid argument
+
+2. Discontinuous queues::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end
+
+ Failed to create flow, report message::
+
+ Discontinuous queue region: Invalid argument
+
+3. Invalid queue index::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end
+
+ Failed to create flow, report message::
+
+ Invalid queue region indexes: Invalid argument
+
+4. set queue group 17 queues::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 end / end
+
+ Failed to create flow, report message::
+
+ Invalid action type or queue number: Invalid argument
+
+5. check the flow list::
+
+ testpmd> flow list 0
+
+ check the rules not exist in the list.
+
+Subcase 4: unsupported input set
+--------------------------------
+
+1. create an nvgre rule with unsupported input set field [inner tos]::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end
+
+2. Failed to create flow, report message::
+
+ Invalid input set: Invalid argument
+
+3. check the rule list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+Subcase 5: duplicated rules
+---------------------------
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. create the same rule again, Failed to create flow, report message::
+
+ switch filter create flow fail: Invalid argument
+
+3. check the flow list::
+
+ testpmd> flow list 0
+
+ check only the first rule exists in the list.
+
+Subcase 6: conflicted rules
+---------------------------
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. create a rule with same input set but different actions::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 2 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions drop / end
+
+ Failed to create the two rules, report message::
+
+ switch filter create flow fail: Invalid argument
+
+3. check the flow list::
+
+ testpmd> flow list 0
+
+ check only the first rule exists in the list.
+
+Subcase 7: multiple actions
+---------------------------
+
+1. create a rule with two conflicted actions::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end
+
+ Failed to create flow, report message::
+
+ Invalid input action number: Invalid argument
+
+2. check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+Subcase 8: void action
+----------------------
+
+1. create a rule with void action::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end
+
+ Failed to create flow, report message::
+
+ NULL action.: Invalid argument
+
+2. check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+Subcase 9: unsupported action
+-----------------------------
+
+1. create a rule with void action::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end
+
+ Failed to create flow, report message::
+
+ Invalid action type: Invalid argument
+
+2. check the flow list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+Subcase 10: delete a non-existing rule
+--------------------------------------
+
+1. check the rule list::
+
+ testpmd> flow list 0
+
+ check no switch filter rule exists in the list.
+
+2. destroy the rule 20000::
+
+ testpmd> flow destroy 0 rule 20000
+
+ check no error reports.
+
+Subcase 11: add long switch rule
+--------------------------------
+
+Description: A recipe has 5 words, one of which is reserved for switch ID,
+so a recipe can use 4 words, and a maximum of 5 recipes can be chained,
+one of which is reserved. Therefore, a rule can use up to 4*4*2 = 32 bytes.
+This case is used to test that a rule whose input set is longer than 32
+bytes can not be created successfully, and will not affect the creation of
+other rules.
+
+1. create a rule with input set length longer than 32 bytes::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ Failed to create flow, report message::
+
+ Invalid input set: Invalid argument
+
+2. check the rule list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+3. create a MAC_PPPOE_IPV6_UDP_PAY rule with to queue action::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+4. send matched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+ check queue 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+ sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+ check the packets are not to queue 1.
+
+5. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 15360
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to queue 1.
+
+Subcase 12: void input set value
+--------------------------------
+
+1. create a IPV4_PAY rule with void input set value::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end
+
+ Failed to create flow, report message::
+
+ Invalid input set: Invalid argument
+
+2. check the rule list::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+
+Subcase 13: invalid port
+------------------------
+
+1. create a rule with invalid port::
+
+ testpmd> flow create 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+
+ Failed to create flow, report message::
+
+ No such device: No such device
+
+2. check the rule list on port 0::
+
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ check on port 1::
+
+ testpmd> flow list 1
+
+ get the message::
+
+ Invalid port 1
+
+Test case: negative validation
+==============================
+Note: some of the error messages may be different.
+
+1. invalid parameters of queue index
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end
+
+ get the error message::
+
+ Invalid action type or queue number: Invalid argument
+
+2. invalid parameters of rss queues
+
+ Invalid number of queues::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end
+
+ get the error message::
+
+ Invalid action type or queue number: Invalid argument
+
+ Discontinuous queues::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end
+
+ get the error message::
+
+ Discontinuous queue region: Invalid argument
+
+ Invalid rss queues index::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end
+
+ get the error message::
+
+ Invalid queue region indexes: Invalid argument
+
+4. unsupported input set
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end
+
+ get the error message::
+
+ Invalid input set: Invalid argument
+
+5. multiple actions
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end
+
+ get the error message::
+
+ Invalid input action number: Invalid argument
+
+6. void action
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end
+
+ get the error message::
+
+ NULL action.: Invalid argument
+
+7. unsupported action
+
+ testpmd> flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end
+
+ get the error message::
+
+ Invalid action type: Invalid argument
+
+8. long switch rule
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+ get the error message::
+
+ Invalid input set: Invalid argument
+
+9. void input set value
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end
+
+ get the error message::
+
+ Invalid input set: Invalid argument
+
+10. invalid port
+
+ testpmd> flow validate 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+
+ get the error message::
+
+ No such device: No such device
+
+11. check the rule list::
+
+ testpmd> flow list 0
+
+ no rule exists in the list.
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH 0/2] split the pppoe cases
2021-03-17 10:58 [dts] [PATCH 0/2] split the pppoe cases xiewei
2021-03-17 10:58 ` [dts] [PATCH 1/2] test_plans/cvl_switch_filter_test_plan: " xiewei
2021-03-17 10:58 ` [dts] [PATCH 2/2] test_plans/cvl_switch_filter_pppoe_test_plan: add new test plan xiewei
@ 2021-03-19 8:59 ` Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2021-03-19 8:59 UTC (permalink / raw)
To: Xie, WeiX, dts; +Cc: Xie, WeiX
> 1.remove cvl_switch_filter_test_plan pppoe part.
> 2.add cvl_switch_filter_pppoe_test_plan for pppoe cases.
>
> xiewei (2):
> test_plans/cvl_switch_filter_test_plan: split the pppoe cases
> test_plans/cvl_switch_filter_pppoe_test_plan: add new test plan
Applied, thanks
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-03-19 8:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-17 10:58 [dts] [PATCH 0/2] split the pppoe cases xiewei
2021-03-17 10:58 ` [dts] [PATCH 1/2] test_plans/cvl_switch_filter_test_plan: " xiewei
2021-03-17 10:58 ` [dts] [PATCH 2/2] test_plans/cvl_switch_filter_pppoe_test_plan: add new test plan xiewei
2021-03-19 8:59 ` [dts] [PATCH 0/2] split the pppoe cases Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).