From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id EAFE7A054F; Wed, 17 Mar 2021 03:33:49 +0100 (CET) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id DF7F6242A3B; Wed, 17 Mar 2021 03:33:49 +0100 (CET) Received: from mga17.intel.com (mga17.intel.com [192.55.52.151]) by mails.dpdk.org (Postfix) with ESMTP id 71A2D40040 for ; Wed, 17 Mar 2021 03:33:47 +0100 (CET) IronPort-SDR: kyyWBvcdCJgE1qv+cxZCzqgRdD57y4LqkcuvDYLmd/G02M+/1OmfLJLxLYt1TKj4UKcwbW8Oqn yfNol7SbdNRA== X-IronPort-AV: E=McAfee;i="6000,8403,9925"; a="169288415" X-IronPort-AV: E=Sophos;i="5.81,254,1610438400"; d="scan'208";a="169288415" Received: from fmsmga005.fm.intel.com ([10.253.24.32]) by fmsmga107.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 16 Mar 2021 19:33:46 -0700 IronPort-SDR: BkyGVpcOt1kM89f8YdnrFl0s8wmNUcbo5ly7WySgEziA7pxGzXeEovXGLNjpoyN9KvprO1rLYh 9lhHlSKfN88Q== X-IronPort-AV: E=Sophos;i="5.81,254,1610438400"; d="scan'208";a="605510222" Received: from unknown (HELO localhost.localdomain) ([10.240.183.103]) by fmsmga005-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 16 Mar 2021 19:33:43 -0700 From: xiewei To: dts@dpdk.org Cc: xiewei Date: Wed, 17 Mar 2021 18:58:47 +0800 Message-Id: <20210317105848.6913-2-weix.xie@intel.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210317105848.6913-1-weix.xie@intel.com> References: <20210317105848.6913-1-weix.xie@intel.com> Subject: [dts] [PATCH 1/2] test_plans/cvl_switch_filter_test_plan: split the pppoe cases X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org Sender: "dts" remove cvl_switch_filter_test_plan pppoe cases. Signed-off-by: xiewei --- test_plans/cvl_switch_filter_test_plan.rst | 5618 +------------------- 1 file changed, 13 insertions(+), 5605 deletions(-) diff --git a/test_plans/cvl_switch_filter_test_plan.rst b/test_plans/cvl_switch_filter_test_plan.rst index 9cd1f760..b8f7e147 100644 --- a/test_plans/cvl_switch_filter_test_plan.rst +++ b/test_plans/cvl_switch_filter_test_plan.rst @@ -41,7 +41,6 @@ This document provides the plan for testing switch filter feature of CVL, includ * Enable switch filter for IPv4/IPv6 + TCP/UDP in non-pipeline/pipeline mode (comm #1 package) * Enable switch filter for tunnel : VXLAN / NVGRE in non-pipeline/pipeline mode (comm #1 package) -* Enable switch filter for PPPOE in non-pipeline/pipeline mode (comm #1 package) In pipeline mode, a flow can be set at one specific stage by setting parameter ``priority``. Currently, we support two stages: priority = 0 or !0. Flows with priority 0 located at the first pipeline stage @@ -124,87 +123,6 @@ Pattern and input set | | | [Inner Source Port], [Inner Dest Port] | | +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+ | ethertype filter | ethertype filter_PPPOED | [Ether type] | [Ether type] | - | | ethertype filter_PPPOES | | | - +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV4_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], | - | | _session_id_proto_id | [pppoe_proto_id] | [pppoe_proto_id] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV6_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], | - | | _session_id_proto_id | [pppoe_proto_id] | [pppoe_proto_id] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV4_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] | - | | _proto_id | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV6_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] | - | | _proto_id | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV4_PAY_IP_address | [Source IP], [Dest IP] | [Source IP], [Dest IP] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV4_UDP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | - | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV4_UDP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] | - | | _non_src_dst_port | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV4_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | - | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV4_TCP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] | - | | _non_src_dst_port | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV6_PAY_IP_address | [Source IP], [Dest IP] | [Source IP], [Dest IP] | - | PPPOES +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV6_UDP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | - | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV6_UDP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] | - | | _non_src_dst_port | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV6_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | - | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPV6_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | - | | _non_src_dst_port | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV4_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | _IP_address | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV4_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV4_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | _non_src_dst_port | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV4_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV4_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | _non_src_dst_port | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV6_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | _IP_address | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV6_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV6_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | _non_src_dst_port | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV6_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPV6_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | - | | _non_src_dst_port | | | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_LCP_PAY | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_PPPOE_IPCP_PAY | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_LCP_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], | - | | | [pppoe_proto_id] | [pppoe_proto_id] | - | +-------------------------------+-------------------------------------------+-------------------------------------------+ - | | MAC_VLAN_PPPOE_IPCP_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], | - | | | [pppoe_proto_id] | [pppoe_proto_id] | +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+ .. note:: @@ -5442,5536 +5360,26 @@ drop action repeat step 1-4 to check the pattern in pipeline mode. -Ethertype filter_PPPOES ------------------------ - -create PPPOE rule to enable RSS for PPPOE packets:: - - testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55", type=0x8864)/PPPoE(sessionid=3)/Raw("x" *80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55", type=0x8863)/PPPoED()/Raw("x" *80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 4 or 5. - send mismatched packets, check the packets are not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 0 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id -====================================================== - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x"*80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action ---------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end +Test case: unsupported patterns in os default package +===================================================== - get the message:: - - Succeeded to create (2) flow +1. load os default package and launch testpmd in pipeline mode as step 3-6 in Prerequisites. - check the flow list:: +2. create unsupported patterns in os default package:: - testpmd> flow list 0 + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 1 / end + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp / gtpu teid is 0x12345678 / gtp_psc qfi is 0x34 / end actions drop / end + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 1 / end + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / l2tpv3oip session_id is 17 / end actions rss queues 2 3 end / end + testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 / udp / esp spi is 8 / end actions rss queues 2 3 end / end + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / ah spi is 1 / end actions queue index 1 / end - check the rule exists in the list. + Failed to create flow, report message:: -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. + Invalid input pattern: Invalid argument -4. verify rules can be destroyed:: +3. check the rule list:: - testpmd> flow destroy 0 rule 15360 testpmd> flow list 0 check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action ---------------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 4 or 5. - send mismatched packets, check the packets are not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action ------------ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id -====================================================== - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action ---------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action ----------------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 4 or 5. - send mismatched packets, check the packets are not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action ------------ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id -================================================= - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action ---------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action ---------------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 4 or 5. - send mismatched packets, check the packets are not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action ------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id -================================================= - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action ---------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packet are distributed to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action ---------------------- - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packet to queue 4 or 5. - send mismatched packets, check the packet not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action ------------ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packet is dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Test case: PPPoE data -===================== - -Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address ----------------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 2: MAC_PPPOE_IPV4_UDP_PAY ---------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 7 or 8. - send mismatched packets, check the packets are not to queue 7 and 8. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 7 and 8. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port --------------------------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 4: MAC_PPPOE_IPV4_TCP_PAY ---------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 7 or 8. - send mismatched packets, check the packets are not to queue 7 and 8. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 7 and 8. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port --------------------------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 7 or 8. - send mismatched packets, check the packets are not to queue 7 and 8. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 7 and 8. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address ----------------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/Raw("x"*80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 7: MAC_PPPOE_IPV6_UDP_PAY ---------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 4 or 5. - send mismatched packets, check the packets are not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port --------------------------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 9: MAC_PPPOE_IPV6_TCP_PAY ---------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 4 or 5. - send mismatched packets, check the packets are not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port ---------------------------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address ----------------------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY ---------------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end - - create a rule:: - - flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 7 or 8. - send mismatched packets, check the packets are not to queue 7 and 8. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 7 and 8. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port --------------------------------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 7 or 8. - send mismatched packets, check the packets are not to queue 7 and 8. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 7 and 8. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY ---------------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 7 or 8. - send mismatched packets, check the packets are not to queue 7 and 8. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 7 and 8. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port --------------------------------------------------------- - -matched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2. - send mismatched packets, check the packets are not to queue 2. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 7 or 8. - send mismatched packets, check the packets are not to queue 7 and 8. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 7 and 8. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address ----------------------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY ---------------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 4 or 5. - send mismatched packets, check the packets are not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port --------------------------------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY ---------------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 4 or 5. - send mismatched packets, check the packets are not to queue 4 and 5. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 4 and 5. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port --------------------------------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Test case: PPPoE Control -======================== - -create a PPPOE rule to enable RSS for PPPOE_control packets:: - - testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end - -Subcase 1: MAC_PPPOE_LCP_PAY ----------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow destroy 0 rule 15361 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 2: MAC_PPPOE_IPCP_PAY ------------------------------ - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow destroy 0 rule 15361 - testpmd> flow list 0 - - check the rules not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 3: MAC_VLAN_PPPOE_LCP_PAY ---------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow destroy 0 rule 15361 - testpmd> flow list 0 - - check the rules not exist in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY ----------------------------------- - -matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) - -mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) - -to queue action -................ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 1. - send mismatched packets, check the packets are not to queue 1. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end - - repeat step 1-4 to check the pattern in pipeline mode. - -to queue group action -...................... - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are to queue 2 or 3. - send mismatched packets, check the packets are not to queue 2 and 3. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow destroy 0 rule 15361 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 2 and 3. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end - - repeat step 1-4 to check the pattern in pipeline mode. - -drop action -............ - -1. validate a rule:: - - testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end - - get the message:: - - Flow rule validated - - check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -2. create a rule:: - - testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end - - get the message:: - - Succeeded to create (2) flow - - check the flow list:: - - testpmd> flow list 0 - - check the rule exists in the list. - -3. send matched packets, check the packets are dropped. - send mismatched packets, check the packets are not dropped. - -4. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not dropped. - -5. check the pattern in pipeline mode - - validate a rule:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end - - create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end - - repeat step 1-4 to check the pattern in pipeline mode. - -Test case: negative cases -========================= -Note: some of the error messages may be differernt. - -Subcase 1: invalid parameters of queue index --------------------------------------------- - -1. create a rule with invalid queue index:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end - - Failed to create flow, report message:: - - Invalid action type or queue number: Invalid argument - -2. check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -Subcase 2: invalid parameters of rss queues -------------------------------------------- - -1. Invalid number of queues:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end - - Failed to create flow, report messag:: - - Invalid action type or queue number: Invalid argument - -2. Discontinuous queues:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end - - Failed to create flow, report message:: - - Discontinuous queue region: Invalid argument - -3. Invalid queue index:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end - - Failed to create flow, report message:: - - Invalid queue region indexes: Invalid argument - -4. set queue group 17 queues:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 end / end - - Failed to create flow, report message:: - - Invalid action type or queue number: Invalid argument - -5. check the flow list:: - - testpmd> flow list 0 - - check the rules not exist in the list. - -Subcase 3: unsupported patterns in os default package ------------------------------------------------------ - -1. load os default package and launch testpmd in pipeline mode as step 3-6 in Prerequisites. - -2. create unsupported patterns in os default package:: - - testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 1 / end - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp / gtpu teid is 0x12345678 / gtp_psc qfi is 0x34 / end actions drop / end - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 1 / end - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / l2tpv3oip session_id is 17 / end actions rss queues 2 3 end / end - testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 / udp / esp spi is 8 / end actions rss queues 2 3 end / end - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / ah spi is 1 / end actions queue index 1 / end - - Failed to create flow, report message:: - - Invalid input pattern: Invalid argument - -3. check the rule list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -Subcase 4: unsupported input set --------------------------------- - -1. create an nvgre rule with unsupported input set field [inner tos]:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end - -2. Failed to create flow, report message:: - - Invalid input set: Invalid argument - -3. check the rule list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -Subcase 5: duplicated rules ---------------------------- - -1. create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end - testpmd> flow list 0 - - check the rule exists in the list. - -2. create the same rule again, Failed to create flow, report message:: - - switch filter create flow fail: Invalid argument - -3. check the flow list:: - - testpmd> flow list 0 - - check only the first rule exists in the list. - -Subcase 6: conflicted rules ---------------------------- - -1. create a rule:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end - testpmd> flow list 0 - - check the rule exists in the list. - -2. create a rule with same input set but different actions:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 2 / end - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions drop / end - - Failed to create the two rules, report message:: - - switch filter create flow fail: Invalid argument - -3. check the flow list:: - - testpmd> flow list 0 - - check only the first rule exists in the list. - -Subcase 7: multiple actions ---------------------------- - -1. create a rule with two conflicted actions:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end - - Failed to create flow, report message:: - - Invalid input action number: Invalid argument - -2. check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -Subcase 8: void action ----------------------- - -1. create a rule with void action:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end - - Failed to create flow, report message:: - - NULL action.: Invalid argument - -2. check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -Subcase 9: unsupported action ------------------------------ - -1. create a rule with void action:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end - - Failed to create flow, report message:: - - Invalid action type: Invalid argument - -2. check the flow list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -Subcase 10: delete a non-existing rule --------------------------------------- - -1. check the rule list:: - - testpmd> flow list 0 - - check no switch filter rule exists in the list. - -2. destroy the rule 20000:: - - testpmd> flow destroy 0 rule 20000 - - check no error reports. - -Subcase 11: add long switch rule --------------------------------- - -Description: A recipe has 5 words, one of which is reserved for switch ID, -so a recipe can use 4 words, and a maximum of 5 recipes can be chained, -one of which is reserved. Therefore, a rule can use up to 4*4*2 = 32 bytes. -This case is used to test that a rule whose input set is longer than 32 -bytes can not be created successfully, and will not affect the creation of -other rules. - -1. create a rule with input set length longer than 32 bytes:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - Failed to create flow, report message:: - - Invalid input set: Invalid argument - -2. check the rule list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -3. create a MAC_PPPOE_IPV6_UDP_PAY rule with to queue action:: - - testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - testpmd> flow list 0 - - check the rule exists in the list. - -4. send matched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - - check queue 1 receive the packet. - send mismatched packets:: - - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) - sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) - - check the packets are not to queue 1. - -5. verify rules can be destroyed:: - - testpmd> flow destroy 0 rule 15360 - testpmd> flow list 0 - - check the rule not exists in the list. - send matched packets, check the packets are not to queue 1. - -Subcase 12: void input set value --------------------------------- - -1. create a IPV4_PAY rule with void input set value:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end - - Failed to create flow, report message:: - - Invalid input set: Invalid argument - -2. check the rule list:: - - testpmd> flow list 0 - - check the rule not exists in the list. - -Subcase 13: invalid port ------------------------- - -1. create a rule with invalid port:: - - testpmd> flow create 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end - - Failed to create flow, report message:: - - No such device: No such device - -2. check the rule list on port 0:: - - testpmd> flow list 0 - - check the rule not exists in the list. - check on port 1:: - - testpmd> flow list 1 - - get the message:: - - Invalid port 1 - -Test case: negative validation -============================== -Note: some of the error messages may be different. - -1. invalid parameters of queue index - - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end - - get the error message:: - - Invalid action type or queue number: Invalid argument - -2. invalid parameters of rss queues - - Invalid number of queues:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end - - get the error message:: - - Invalid action type or queue number: Invalid argument - - Discontinuous queues:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end - - get the error message:: - - Discontinuous queue region: Invalid argument - - Invalid rss queues index:: - - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end - - get the error message:: - - Invalid queue region indexes: Invalid argument - -3. unsupported pattern in os default package:: - - testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 1 / end - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp / gtpu teid is 0x12345678 / gtp_psc qfi is 0x34 / end actions drop / end - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 1 / end - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / l2tpv3oip session_id is 17 / end actions rss queues 2 3 end / end - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv6 / udp / esp spi is 8 / end actions rss queues 2 3 end / end - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / ah spi is 1 / end actions queue index 1 / end - - get the error message:: - - Invalid input pattern: Invalid argument - -4. unsupported input set - - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end - - get the error message:: - - Invalid input set: Invalid argument - -5. multiple actions - - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end - - get the error message:: - - Invalid input action number: Invalid argument - -6. void action - - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end - - get the error message:: - - NULL action.: Invalid argument - -7. unsupported action - - testpmd> flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end - - get the error message:: - - Invalid action type: Invalid argument - -8. long switch rule - - testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end - - get the error message:: - - Invalid input set: Invalid argument - -9. void input set value - - testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end - - get the error message:: - - Invalid input set: Invalid argument - -10. invalid port - - testpmd> flow validate 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end - - get the error message:: - - No such device: No such device - -11. check the rule list:: - - testpmd> flow list 0 - - no rule exists in the list. -- 2.17.1