From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 2B081A054F; Wed, 17 Mar 2021 03:33:52 +0100 (CET) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 1E086242A3A; Wed, 17 Mar 2021 03:33:52 +0100 (CET) Received: from mga17.intel.com (mga17.intel.com [192.55.52.151]) by mails.dpdk.org (Postfix) with ESMTP id 2A766242A4B for ; Wed, 17 Mar 2021 03:33:50 +0100 (CET) IronPort-SDR: 3HRV3UIE9CUatD2eOzGMpK+Tbqt9mDyjl8AbJWrZYWshVluD+gfi/68t9JfnWKVZSnl7YwmUq7 GxosAeZp3U6Q== X-IronPort-AV: E=McAfee;i="6000,8403,9925"; a="169288424" X-IronPort-AV: E=Sophos;i="5.81,254,1610438400"; d="scan'208";a="169288424" Received: from fmsmga005.fm.intel.com ([10.253.24.32]) by fmsmga107.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 16 Mar 2021 19:33:48 -0700 IronPort-SDR: PfEJs7zDERllvBoMkPRHC/2/KSvOlfpDymvTUC/q+HC0e1zqqk3v9U4czm7Himw/dzAM1TLV8w 5zcAhWj1D5Mg== X-IronPort-AV: E=Sophos;i="5.81,254,1610438400"; d="scan'208";a="605510245" Received: from unknown (HELO localhost.localdomain) ([10.240.183.103]) by fmsmga005-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 16 Mar 2021 19:33:46 -0700 From: xiewei To: dts@dpdk.org Cc: xiewei Date: Wed, 17 Mar 2021 18:58:48 +0800 Message-Id: <20210317105848.6913-3-weix.xie@intel.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210317105848.6913-1-weix.xie@intel.com> References: <20210317105848.6913-1-weix.xie@intel.com> Subject: [dts] [PATCH 2/2] test_plans/cvl_switch_filter_pppoe_test_plan: add new test plan X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org Sender: "dts" add new test plan for cvl swicth filter pppoe cases. Signed-off-by: xiewei --- .../cvl_switch_filter_pppoe_test_plan.rst | 5720 +++++++++++++++++ 1 file changed, 5720 insertions(+) create mode 100644 test_plans/cvl_switch_filter_pppoe_test_plan.rst diff --git a/test_plans/cvl_switch_filter_pppoe_test_plan.rst b/test_plans/cvl_switch_filter_pppoe_test_plan.rst new file mode 100644 index 00000000..a2854276 --- /dev/null +++ b/test_plans/cvl_switch_filter_pppoe_test_plan.rst @@ -0,0 +1,5720 @@ +.. Copyright (c) <2019-2020>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + +======================= +CVL Switch Filter Tests +======================= + +Description +=========== + +This document provides the plan for testing switch filter feature of CVL, including: + +* Enable switch filter for PPPOE in non-pipeline/pipeline mode (comm #1 package) + +In pipeline mode, a flow can be set at one specific stage by setting parameter ``priority``. Currently, +we support two stages: priority = 0 or !0. Flows with priority 0 located at the first pipeline stage +which typically be used as a firewall. At this stage, flow rules are created for the device's exact +match engine: switch. Flows with priority !0 located at the second stage, typically packets are +classified here and be steered to specific queue or queue group. At this stage, flow rules are created +for device's flow director engine. + +In non-pipeline mode, ``priority`` is ignored, a flow rule can be created as a flow director rule or a +switch rule depends on its pattern/action. If a rule is supported by switch or fdir at the same time, it +will be created in the fdir table first. Therefore, to test switch filter in non-pipeline mode, we need to +fill the fdir table first, and then the rules are created in the switch filter table. The capacity of fdir +table is 16K, of which 14K is shared by all pfs and vfs, and the remaining 2K is gurantee for pfs. If 4*25G +NIC, the gurantee for each pf is 512. If 2*100G NIC, the gurantee of each pf is 1024. so 1 pf can create at +most 14848 rules on 4 ports card and 15360 rules on 2 ports card. + +Pattern and input set +--------------------- + + +---------------------+-------------------------------+---------------------------------------------------------------------------------------+ + | | | Input Set | + | Packet Types | Pattern +-------------------------------------------+-------------------------------------------+ + | | | non-pipeline mode | pipeline mode | + +=====================+===============================+===========================================+===========================================+ + | ethertype filter | ethertype filter_PPPOES | [Ether type] | [Ether type] | + +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV4_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], | + | | _session_id_proto_id | [pppoe_proto_id] | [pppoe_proto_id] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV6_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], | + | | _session_id_proto_id | [pppoe_proto_id] | [pppoe_proto_id] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV4_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] | + | | _proto_id | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV6_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] | + | | _proto_id | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV4_PAY_IP_address | [Source IP], [Dest IP] | [Source IP], [Dest IP] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV4_UDP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | + | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV4_UDP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] | + | | _non_src_dst_port | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV4_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | + | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV4_TCP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] | + | | _non_src_dst_port | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV6_PAY_IP_address | [Source IP], [Dest IP] | [Source IP], [Dest IP] | + | PPPOES +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV6_UDP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | + | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV6_UDP_PAY | [Source IP], [Dest IP] | [Source IP], [Dest IP] | + | | _non_src_dst_port | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV6_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | + | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPV6_TCP_PAY | [Source IP], [Dest IP], | [Source IP], [Dest IP], | + | | _non_src_dst_port | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV4_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | _IP_address | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV4_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV4_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | _non_src_dst_port | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV4_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV4_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | _non_src_dst_port | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV6_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | _IP_address | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV6_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV6_UDP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | _non_src_dst_port | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV6_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | | [Source Port], [Dest Port] | [Source Port], [Dest Port] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPV6_TCP_PAY | [VLAN], [Source IP], [Dest IP] | [VLAN], [Source IP], [Dest IP] | + | | _non_src_dst_port | | | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_LCP_PAY | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_PPPOE_IPCP_PAY | [Dest MAC], [seid], [pppoe_proto_id] | [Dest MAC], [seid], [pppoe_proto_id] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_LCP_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], | + | | | [pppoe_proto_id] | [pppoe_proto_id] | + | +-------------------------------+-------------------------------------------+-------------------------------------------+ + | | MAC_VLAN_PPPOE_IPCP_PAY | [Dest MAC], [VLAN], [seid], | [Dest MAC], [VLAN], [seid], | + | | | [pppoe_proto_id] | [pppoe_proto_id] | + +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+ + +.. note:: + + 1. The maximum input set length of a switch rule is 32 bytes, and src ipv6, + dst ipv6 account for 32 bytes. Therefore, for ipv6 cases, if need to test + fields other than src, dst ip, we create rule by removing src or dst ip in + the test plan. + + 2. For MAC_IPV4_TUN_IPV4_FRAG/MAC_IPV4_TUN_IPV4_PAY cases and + MAC_IPV4_TUN_MAC_IPV4_FRAG/MAC_IPV4_TUN_MAC_IPV4_PAY cases, the input set + of each pair is the same, so use MAC_IPV4_TUN_IPV4 and MAC_IPV4_TUN_MAC_IPV4 + pattern to replace them in the test plan. + +Supported function type +----------------------- + +* validate +* create +* destroy +* flush +* list + +Supported action type +--------------------- + +* to queue +* to queue group +* drop + +Prerequisites +============= + +1. Hardware: + columbiaville_25g/columbiaville_100g + design the cases with 2 ports card. + +2. software: + + - dpdk: http://dpdk.org/git/dpdk + - scapy: http://www.secdev.org/projects/scapy/ + +3. Copy comm #1 package to /lib/firmware/intel/ice/ddp/ice.pkg, + then load driver:: + + rmmod ice + insmod ice.ko + +4. Compile DPDK:: + + make -j install T=x86_64-native-linuxapp-gcc + +5. Bind pf to dpdk driver:: + + ./usertools/dpdk-devbind.py -b vfio-pci 18:00.2 + +6. Launch dpdk with the following arguments in non-pipeline mode:: + + ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 --log-level="ice,8" -- -i --txq=16 --rxq=16 --cmdline-file=testpmd_fdir_rules + testpmd> port config 0 rss-hash-key ipv4 1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd + testpmd> set fwd rxonly + testpmd> set verbose 1 + testpmd> start + + If set VXLAN flow rule:: + + testpmd> rx_vxlan_port add 4789 0 + + Note: file ``testpmd_fdir_rules`` contains 15,360 fdir rules to make fdir table full. + + Launch dpdk in pipeline mode with the following testpmd command line:: + + ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0,pipeline-mode-support=1 --log-level="ice,8" -- -i --txq=16 --rxq=16 + +Test case: Ethertype filter +=========================== + +Ethertype filter_PPPOES +----------------------- + +create PPPOE rule to enable RSS for PPPOE packets:: + + testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55", type=0x8864)/PPPoE(sessionid=3)/Raw("x" *80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55", type=0x8863)/PPPoED()/Raw("x" *80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 4 or 5. + send mismatched packets, check the packets are not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 0 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id +====================================================== + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x"*80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +--------------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +--------------------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 4 or 5. + send mismatched packets, check the packets are not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +----------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id +====================================================== + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +--------------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +---------------------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 4 or 5. + send mismatched packets, check the packets are not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +----------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id +================================================= + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +--------------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +--------------------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 4 or 5. + send mismatched packets, check the packets are not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +------------ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id +================================================= + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +--------------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packet are distributed to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +--------------------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packet to queue 4 or 5. + send mismatched packets, check the packet not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +----------- + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packet is dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Test case: PPPoE data +===================== + +Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address +---------------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 2: MAC_PPPOE_IPV4_UDP_PAY +--------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 7 or 8. + send mismatched packets, check the packets are not to queue 7 and 8. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 7 and 8. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port +-------------------------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 4: MAC_PPPOE_IPV4_TCP_PAY +--------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 7 or 8. + send mismatched packets, check the packets are not to queue 7 and 8. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 7 and 8. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port +-------------------------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 7 or 8. + send mismatched packets, check the packets are not to queue 7 and 8. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 7 and 8. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address +---------------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/Raw("x"*80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 7: MAC_PPPOE_IPV6_UDP_PAY +--------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 4 or 5. + send mismatched packets, check the packets are not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port +-------------------------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 9: MAC_PPPOE_IPV6_TCP_PAY +--------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 4 or 5. + send mismatched packets, check the packets are not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port +--------------------------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address +---------------------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY +--------------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end + + create a rule:: + + flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 7 or 8. + send mismatched packets, check the packets are not to queue 7 and 8. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 7 and 8. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port +-------------------------------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 7 or 8. + send mismatched packets, check the packets are not to queue 7 and 8. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 7 and 8. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY +--------------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 7 or 8. + send mismatched packets, check the packets are not to queue 7 and 8. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 7 and 8. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port +-------------------------------------------------------- + +matched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2. + send mismatched packets, check the packets are not to queue 2. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 7 or 8. + send mismatched packets, check the packets are not to queue 7 and 8. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 7 and 8. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address +---------------------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY +--------------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 4 or 5. + send mismatched packets, check the packets are not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port +-------------------------------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY +--------------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 4 or 5. + send mismatched packets, check the packets are not to queue 4 and 5. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 4 and 5. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port +-------------------------------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Test case: PPPoE Control +======================== + +create a PPPOE rule to enable RSS for PPPOE_control packets:: + + testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end + +Subcase 1: MAC_PPPOE_LCP_PAY +---------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow destroy 0 rule 15361 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 2: MAC_PPPOE_IPCP_PAY +----------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow destroy 0 rule 15361 + testpmd> flow list 0 + + check the rules not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 3: MAC_VLAN_PPPOE_LCP_PAY +--------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow destroy 0 rule 15361 + testpmd> flow list 0 + + check the rules not exist in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY +---------------------------------- + +matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) + +mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1) + +to queue action +................ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 1. + send mismatched packets, check the packets are not to queue 1. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end + + repeat step 1-4 to check the pattern in pipeline mode. + +to queue group action +...................... + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are to queue 2 or 3. + send mismatched packets, check the packets are not to queue 2 and 3. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow destroy 0 rule 15361 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 2 and 3. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end + + repeat step 1-4 to check the pattern in pipeline mode. + +drop action +............ + +1. validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end + + get the message:: + + Flow rule validated + + check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +2. create a rule:: + + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end + + get the message:: + + Succeeded to create (2) flow + + check the flow list:: + + testpmd> flow list 0 + + check the rule exists in the list. + +3. send matched packets, check the packets are dropped. + send mismatched packets, check the packets are not dropped. + +4. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not dropped. + +5. check the pattern in pipeline mode + + validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end + + create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end + + repeat step 1-4 to check the pattern in pipeline mode. + +Test case: negative cases +========================= +Note: some of the error messages may be differernt. + +Subcase 1: invalid parameters of queue index +-------------------------------------------- + +1. create a rule with invalid queue index:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end + + Failed to create flow, report message:: + + Invalid action type or queue number: Invalid argument + +2. check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +Subcase 2: invalid parameters of rss queues +------------------------------------------- + +1. Invalid number of queues:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end + + Failed to create flow, report messag:: + + Invalid action type or queue number: Invalid argument + +2. Discontinuous queues:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end + + Failed to create flow, report message:: + + Discontinuous queue region: Invalid argument + +3. Invalid queue index:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end + + Failed to create flow, report message:: + + Invalid queue region indexes: Invalid argument + +4. set queue group 17 queues:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 end / end + + Failed to create flow, report message:: + + Invalid action type or queue number: Invalid argument + +5. check the flow list:: + + testpmd> flow list 0 + + check the rules not exist in the list. + +Subcase 4: unsupported input set +-------------------------------- + +1. create an nvgre rule with unsupported input set field [inner tos]:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end + +2. Failed to create flow, report message:: + + Invalid input set: Invalid argument + +3. check the rule list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +Subcase 5: duplicated rules +--------------------------- + +1. create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end + testpmd> flow list 0 + + check the rule exists in the list. + +2. create the same rule again, Failed to create flow, report message:: + + switch filter create flow fail: Invalid argument + +3. check the flow list:: + + testpmd> flow list 0 + + check only the first rule exists in the list. + +Subcase 6: conflicted rules +--------------------------- + +1. create a rule:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end + testpmd> flow list 0 + + check the rule exists in the list. + +2. create a rule with same input set but different actions:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 2 / end + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions drop / end + + Failed to create the two rules, report message:: + + switch filter create flow fail: Invalid argument + +3. check the flow list:: + + testpmd> flow list 0 + + check only the first rule exists in the list. + +Subcase 7: multiple actions +--------------------------- + +1. create a rule with two conflicted actions:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end + + Failed to create flow, report message:: + + Invalid input action number: Invalid argument + +2. check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +Subcase 8: void action +---------------------- + +1. create a rule with void action:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end + + Failed to create flow, report message:: + + NULL action.: Invalid argument + +2. check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +Subcase 9: unsupported action +----------------------------- + +1. create a rule with void action:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end + + Failed to create flow, report message:: + + Invalid action type: Invalid argument + +2. check the flow list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +Subcase 10: delete a non-existing rule +-------------------------------------- + +1. check the rule list:: + + testpmd> flow list 0 + + check no switch filter rule exists in the list. + +2. destroy the rule 20000:: + + testpmd> flow destroy 0 rule 20000 + + check no error reports. + +Subcase 11: add long switch rule +-------------------------------- + +Description: A recipe has 5 words, one of which is reserved for switch ID, +so a recipe can use 4 words, and a maximum of 5 recipes can be chained, +one of which is reserved. Therefore, a rule can use up to 4*4*2 = 32 bytes. +This case is used to test that a rule whose input set is longer than 32 +bytes can not be created successfully, and will not affect the creation of +other rules. + +1. create a rule with input set length longer than 32 bytes:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + Failed to create flow, report message:: + + Invalid input set: Invalid argument + +2. check the rule list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +3. create a MAC_PPPOE_IPV6_UDP_PAY rule with to queue action:: + + testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + testpmd> flow list 0 + + check the rule exists in the list. + +4. send matched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + + check queue 1 receive the packet. + send mismatched packets:: + + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1) + sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1) + + check the packets are not to queue 1. + +5. verify rules can be destroyed:: + + testpmd> flow destroy 0 rule 15360 + testpmd> flow list 0 + + check the rule not exists in the list. + send matched packets, check the packets are not to queue 1. + +Subcase 12: void input set value +-------------------------------- + +1. create a IPV4_PAY rule with void input set value:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end + + Failed to create flow, report message:: + + Invalid input set: Invalid argument + +2. check the rule list:: + + testpmd> flow list 0 + + check the rule not exists in the list. + +Subcase 13: invalid port +------------------------ + +1. create a rule with invalid port:: + + testpmd> flow create 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end + + Failed to create flow, report message:: + + No such device: No such device + +2. check the rule list on port 0:: + + testpmd> flow list 0 + + check the rule not exists in the list. + check on port 1:: + + testpmd> flow list 1 + + get the message:: + + Invalid port 1 + +Test case: negative validation +============================== +Note: some of the error messages may be different. + +1. invalid parameters of queue index + + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end + + get the error message:: + + Invalid action type or queue number: Invalid argument + +2. invalid parameters of rss queues + + Invalid number of queues:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end + + get the error message:: + + Invalid action type or queue number: Invalid argument + + Discontinuous queues:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end + + get the error message:: + + Discontinuous queue region: Invalid argument + + Invalid rss queues index:: + + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end + + get the error message:: + + Invalid queue region indexes: Invalid argument + +4. unsupported input set + + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end + + get the error message:: + + Invalid input set: Invalid argument + +5. multiple actions + + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end + + get the error message:: + + Invalid input action number: Invalid argument + +6. void action + + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end + + get the error message:: + + NULL action.: Invalid argument + +7. unsupported action + + testpmd> flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end + + get the error message:: + + Invalid action type: Invalid argument + +8. long switch rule + + testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end + + get the error message:: + + Invalid input set: Invalid argument + +9. void input set value + + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end + + get the error message:: + + Invalid input set: Invalid argument + +10. invalid port + + testpmd> flow validate 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end + + get the error message:: + + No such device: No such device + +11. check the rule list:: + + testpmd> flow list 0 + + no rule exists in the list. -- 2.17.1