[dts] [PATCH V1] framework/dut: fix getting nic info failed in FreeBSD

test suite reviews and discussions
 help / color / mirror / Atom feed

* [dts] [PATCH V1] framework/dut: fix getting nic info failed in FreeBSD
@ 2021-04-01  7:38 Haiyang Zhao
  2021-04-01  7:51 ` Zhao, HaiyangX
  2021-04-07  2:12 ` Tu, Lijuan
  0 siblings, 2 replies; 3+ messages in thread
From: Haiyang Zhao @ 2021-04-01  7:38 UTC (permalink / raw)
  To: dts; +Cc: Haiyang Zhao

Getting pci_id will be failed in FreeBSD and it causes get nic name 
and default_driver failed, and will cause many cases failed, fix it 
by assign the pci_id and reget the nic and driver name.

Signed-off-by: Haiyang Zhao <haiyangx.zhao@intel.com>
---
 framework/dut.py | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/framework/dut.py b/framework/dut.py
index 6216166d..ca1c9089 100644
--- a/framework/dut.py
+++ b/framework/dut.py
@@ -1061,6 +1061,9 @@ class Dut(Crb):
             bus_id = addr_array[1]
             devfun_id = addr_array[2]
             port = GetNicObj(self, domain_id, bus_id, devfun_id)
+            port.pci_id= pci_id
+            port.name = settings.get_nic_name(pci_id)
+            port.default_driver = settings.get_nic_driver(pci_id)
             intf = port.get_interface_name()
 
             macaddr = port.get_mac_addr()
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dts] [PATCH V1] framework/dut: fix getting nic info failed in FreeBSD
  2021-04-01  7:38 [dts] [PATCH V1] framework/dut: fix getting nic info failed in FreeBSD Haiyang Zhao
@ 2021-04-01  7:51 ` Zhao, HaiyangX
  2021-04-07  2:12 ` Tu, Lijuan
  1 sibling, 0 replies; 3+ messages in thread
From: Zhao, HaiyangX @ 2021-04-01  7:51 UTC (permalink / raw)
  To: dts

[-- Attachment #1: Type: text/plain, Size: 330 bytes --]

> -----Original Message-----
> From: Zhao, HaiyangX <haiyangx.zhao@intel.com>
> Sent: Thursday, April 1, 2021 15:39
> To: dts@dpdk.org
> Cc: Zhao, HaiyangX <haiyangx.zhao@intel.com>
> Subject: [dts][PATCH V1] framework/dut: fix getting nic info failed in
> FreeBSD

Tested-by:  Haiyang Zhao <haiyangx.zhao@intel.com>

[-- Attachment #2: TestCoremask.log --]
[-- Type: application/octet-stream, Size: 356327 bytes --]

01/04/2021 23:05:29                            dts: 
TEST SUITE : TestCoremask
01/04/2021 23:05:29                            dts: NIC :        fortville_eagle
01/04/2021 23:05:29             dut.10.240.183.134: 
01/04/2021 23:05:29                         tester: 
01/04/2021 23:05:29                   TestCoremask: Test Case test_all_cores_coremask Begin
01/04/2021 23:05:30             dut.10.240.183.134: 
01/04/2021 23:05:30                         tester: 
01/04/2021 23:05:30             dut.10.240.183.134: cat config/defconfig_x86_64-native-bsdapp-gcc | sed '/^#/d' | sed '/^\s*$/d'
01/04/2021 23:05:30             dut.10.240.183.134: cat: config/defconfig_x86_64-native-bsdapp-gcc: No such file or directory
01/04/2021 23:05:30             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0xfffffffffe -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:31             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 1 is ready (tid=0x801942000;cpuset=[1])
EAL: lcore 2 is ready (tid=0x801942f00;cpuset=[2])
EAL: lcore 3 is ready (tid=0x801943400;cpuset=[3])
EAL: lcore 4 is ready (tid=0x801943900;cpuset=[4])
EAL: lcore 5 is ready (tid=0x801943e00;cpuset=[5])
EAL: lcore 6 is ready (tid=0x801944300;cpuset=[6])
EAL: lcore 7 is ready (tid=0x801944800;cpuset=[7])
EAL: lcore 8 is ready (tid=0x801944d00;cpuset=[8])
EAL: lcore 9 is ready (tid=0x801945200;cpuset=[9])
EAL: lcore 10 is ready (tid=0x801945700;cpuset=[10])
EAL: lcore 11 is ready (tid=0x801945c00;cpuset=[11])
EAL: lcore 12 is ready (tid=0x801946100;cpuset=[12])
EAL: lcore 13 is ready (tid=0x801946600;cpuset=[13])
EAL: lcore 14 is ready (tid=0x801946b00;cpuset=[14])
EAL: lcore 15 is ready (tid=0x8019f2000;cpuset=[15])
EAL: lcore 16 is ready (tid=0x8019f2500;cpuset=[16])
EAL: lcore 17 is ready (tid=0x8019f2a00;cpuset=[17])
EAL: lcore 18 is ready (tid=0x8019f2f00;cpuset=[18])
EAL: lcore 19 is ready (tid=0x8019f3400;cpuset=[19])
EAL: lcore 20 is ready (tid=0x8019f3900;cpuset=[20])
EAL: lcore 21 is ready (tid=0x8019f3e00;cpuset=[21])
EAL: lcore 22 is ready (tid=0x8019f4300;cpuset=[22])
EAL: lcore 23 is ready (tid=0x8019f4800;cpuset=[23])
EAL: lcore 24 is ready (tid=0x8019f4d00;cpuset=[24])
EAL: lcore 25 is ready (tid=0x8019f5200;cpuset=[25])
EAL: lcore 26 is ready (tid=0x8019f5700;cpuset=[26])
EAL: lcore 27 is ready (tid=0x8019f5c00;cpuset=[27])
EAL: lcore 28 is ready (tid=0x8019f6100;cpuset=[28])
EAL: lcore 29 is ready (tid=0x8019f6600;cpuset=[29])
EAL: lcore 30 is ready (tid=0x8019f6b00;cpuset=[30])
EAL: lcore 31 is ready (tid=0x8019f7000;cpuset=[31])
EAL: lcore 32 is ready (tid=0x8019f7500;cpuset=[32])
EAL: lcore 33 is ready (tid=0x8019f7a00;cpuset=[33])
EAL: lcore 34 is ready (tid=0x8019f7f00;cpuset=[34])
EAL: lcore 35 is ready (tid=0x8019f8400;cpuset=[35])
EAL: lcore 36 is ready (tid=0x8019f8900;cpuset=[36])
EAL: lcore 37 is ready (tid=0x8019f8e00;cpuset=[37])
EAL: lcore 38 is ready (tid=0x8019f9300;cpuset=[38])
EAL: lcore 39 is ready (tid=0x8019f9800;cpuset=[39])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x802869000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 163 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x802879000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 164 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:31             dut.10.240.183.134: quit
01/04/2021 23:05:32             dut.10.240.183.134: 
01/04/2021 23:05:32                   TestCoremask: Test Case test_all_cores_coremask Result PASSED:
01/04/2021 23:05:32             dut.10.240.183.134: kill_all: called by dut and has no prefix list.
01/04/2021 23:05:33             dut.10.240.183.134: There are some dpdk process not free hugepage
01/04/2021 23:05:33             dut.10.240.183.134: **************************************
01/04/2021 23:05:33             dut.10.240.183.134: lsof: WARNING: compiled for FreeBSD release 12.1-RELEASE-p3; this is 12.1-RELEASE.
01/04/2021 23:05:33             dut.10.240.183.134: **************************************
01/04/2021 23:05:33                   TestCoremask: Test Case test_big_coremask Begin
01/04/2021 23:05:33             dut.10.240.183.134: 
01/04/2021 23:05:33                         tester: 
01/04/2021 23:05:33             dut.10.240.183.134: cat config/defconfig_x86_64-native-bsdapp-gcc | sed '/^#/d' | sed '/^\s*$/d'
01/04/2021 23:05:33             dut.10.240.183.134: cat: config/defconfig_x86_64-native-bsdapp-gcc: No such file or directory
01/04/2021 23:05:33             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0xffffffffff -n 4 --log-level="lib.eal,8" 2>&1 |tee out
01/04/2021 23:05:35             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 0 is ready (tid=0x801942000;cpuset=[0])
EAL: lcore 1 is ready (tid=0x801942f00;cpuset=[1])
EAL: lcore 2 is ready (tid=0x801943400;cpuset=[2])
EAL: lcore 3 is ready (tid=0x801943900;cpuset=[3])
EAL: lcore 4 is ready (tid=0x801943e00;cpuset=[4])
EAL: lcore 5 is ready (tid=0x801944300;cpuset=[5])
EAL: lcore 6 is ready (tid=0x801944800;cpuset=[6])
EAL: lcore 7 is ready (tid=0x801944d00;cpuset=[7])
EAL: lcore 8 is ready (tid=0x801945200;cpuset=[8])
EAL: lcore 9 is ready (tid=0x801945700;cpuset=[9])
EAL: lcore 10 is ready (tid=0x801945c00;cpuset=[10])
EAL: lcore 11 is ready (tid=0x801946100;cpuset=[11])
EAL: lcore 12 is ready (tid=0x801946600;cpuset=[12])
EAL: lcore 13 is ready (tid=0x801946b00;cpuset=[13])
EAL: lcore 14 is ready (tid=0x8019f2000;cpuset=[14])
EAL: lcore 15 is ready (tid=0x8019f2500;cpuset=[15])
EAL: lcore 16 is ready (tid=0x8019f2a00;cpuset=[16])
EAL: lcore 17 is ready (tid=0x8019f2f00;cpuset=[17])
EAL: lcore 18 is ready (tid=0x8019f3400;cpuset=[18])
EAL: lcore 19 is ready (tid=0x8019f3900;cpuset=[19])
EAL: lcore 20 is ready (tid=0x8019f3e00;cpuset=[20])
EAL: lcore 21 is ready (tid=0x8019f4300;cpuset=[21])
EAL: lcore 22 is ready (tid=0x8019f4800;cpuset=[22])
EAL: lcore 23 is ready (tid=0x8019f4d00;cpuset=[23])
EAL: lcore 24 is ready (tid=0x8019f5200;cpuset=[24])
EAL: lcore 25 is ready (tid=0x8019f5700;cpuset=[25])
EAL: lcore 26 is ready (tid=0x8019f5c00;cpuset=[26])
EAL: lcore 27 is ready (tid=0x8019f6100;cpuset=[27])
EAL: lcore 28 is ready (tid=0x8019f6600;cpuset=[28])
EAL: lcore 29 is ready (tid=0x8019f6b00;cpuset=[29])
EAL: lcore 30 is ready (tid=0x8019f7000;cpuset=[30])
EAL: lcore 31 is ready (tid=0x8019f7500;cpuset=[31])
EAL: lcore 32 is ready (tid=0x8019f7a00;cpuset=[32])
EAL: lcore 33 is ready (tid=0x8019f7f00;cpuset=[33])
EAL: lcore 34 is ready (tid=0x8019f8400;cpuset=[34])
EAL: lcore 35 is ready (tid=0x8019f8900;cpuset=[35])
EAL: lcore 36 is ready (tid=0x8019f8e00;cpuset=[36])
EAL: lcore 37 is ready (tid=0x8019f9300;cpuset=[37])
EAL: lcore 38 is ready (tid=0x8019f9800;cpuset=[38])
EAL: lcore 39 is ready (tid=0x8019f9d00;cpuset=[39])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x802869000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 167 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x802879000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 168 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:35             dut.10.240.183.134: quit
01/04/2021 23:05:35             dut.10.240.183.134: 
01/04/2021 23:05:35                   TestCoremask: Test Case test_big_coremask Result PASSED:
01/04/2021 23:05:35             dut.10.240.183.134: kill_all: called by dut and has no prefix list.
01/04/2021 23:05:36             dut.10.240.183.134: There are some dpdk process not free hugepage
01/04/2021 23:05:36             dut.10.240.183.134: **************************************
01/04/2021 23:05:36             dut.10.240.183.134: lsof: WARNING: compiled for FreeBSD release 12.1-RELEASE-p3; this is 12.1-RELEASE.
01/04/2021 23:05:36             dut.10.240.183.134: **************************************
01/04/2021 23:05:36                   TestCoremask: Test Case test_individual_coremask Begin
01/04/2021 23:05:36             dut.10.240.183.134: 
01/04/2021 23:05:36                         tester: 
01/04/2021 23:05:36             dut.10.240.183.134: cat config/defconfig_x86_64-native-bsdapp-gcc | sed '/^#/d' | sed '/^\s*$/d'
01/04/2021 23:05:36             dut.10.240.183.134: cat: config/defconfig_x86_64-native-bsdapp-gcc: No such file or directory
01/04/2021 23:05:36             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x2 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:38             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 1 is ready (tid=0x801942000;cpuset=[1])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:38             dut.10.240.183.134: quit
01/04/2021 23:05:38             dut.10.240.183.134: 
01/04/2021 23:05:38             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x4 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:40             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 2 is ready (tid=0x801942000;cpuset=[2])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:40             dut.10.240.183.134: quit
01/04/2021 23:05:40             dut.10.240.183.134: 
01/04/2021 23:05:40             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x8 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:41             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 3 is ready (tid=0x801942000;cpuset=[3])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:41             dut.10.240.183.134: quit
01/04/2021 23:05:42             dut.10.240.183.134: 
01/04/2021 23:05:42             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x10 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:43             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 4 is ready (tid=0x801942000;cpuset=[4])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:43             dut.10.240.183.134: quit
01/04/2021 23:05:44             dut.10.240.183.134: 
01/04/2021 23:05:44             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x20 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:45             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 5 is ready (tid=0x801942000;cpuset=[5])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:45             dut.10.240.183.134: quit
01/04/2021 23:05:46             dut.10.240.183.134: 
01/04/2021 23:05:46             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x40 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:47             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 6 is ready (tid=0x801942000;cpuset=[6])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:47             dut.10.240.183.134: quit
01/04/2021 23:05:47             dut.10.240.183.134: 
01/04/2021 23:05:47             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x80 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:49             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 7 is ready (tid=0x801942000;cpuset=[7])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:49             dut.10.240.183.134: quit
01/04/2021 23:05:49             dut.10.240.183.134: 
01/04/2021 23:05:49             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x100 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 8 is ready (tid=0x801942000;cpuset=[8])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:51             dut.10.240.183.134: quit
01/04/2021 23:05:51             dut.10.240.183.134: 
01/04/2021 23:05:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x200 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:53             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 9 is ready (tid=0x801942000;cpuset=[9])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:53             dut.10.240.183.134: quit
01/04/2021 23:05:53             dut.10.240.183.134: 
01/04/2021 23:05:53             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x400 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:55             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 10 is ready (tid=0x801942000;cpuset=[10])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:55             dut.10.240.183.134: quit
01/04/2021 23:05:55             dut.10.240.183.134: 
01/04/2021 23:05:55             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x800 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:57             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 11 is ready (tid=0x801942000;cpuset=[11])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:57             dut.10.240.183.134: quit
01/04/2021 23:05:57             dut.10.240.183.134: 
01/04/2021 23:05:57             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x1000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:05:58             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 12 is ready (tid=0x801942000;cpuset=[12])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:05:58             dut.10.240.183.134: quit
01/04/2021 23:05:59             dut.10.240.183.134: 
01/04/2021 23:05:59             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x2000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:00             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 13 is ready (tid=0x801942000;cpuset=[13])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:00             dut.10.240.183.134: quit
01/04/2021 23:06:01             dut.10.240.183.134: 
01/04/2021 23:06:01             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x4000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:02             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 14 is ready (tid=0x801942000;cpuset=[14])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:02             dut.10.240.183.134: quit
01/04/2021 23:06:03             dut.10.240.183.134: 
01/04/2021 23:06:03             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x8000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:04             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 15 is ready (tid=0x801942000;cpuset=[15])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:04             dut.10.240.183.134: quit
01/04/2021 23:06:04             dut.10.240.183.134: 
01/04/2021 23:06:04             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x10000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:06             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 16 is ready (tid=0x801942000;cpuset=[16])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:06             dut.10.240.183.134: quit
01/04/2021 23:06:06             dut.10.240.183.134: 
01/04/2021 23:06:06             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x20000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:08             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 17 is ready (tid=0x801942000;cpuset=[17])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:08             dut.10.240.183.134: quit
01/04/2021 23:06:08             dut.10.240.183.134: 
01/04/2021 23:06:08             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x40000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:10             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 18 is ready (tid=0x801942000;cpuset=[18])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:10             dut.10.240.183.134: quit
01/04/2021 23:06:10             dut.10.240.183.134: 
01/04/2021 23:06:10             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x80000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:12             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 19 is ready (tid=0x801942000;cpuset=[19])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:12             dut.10.240.183.134: quit
01/04/2021 23:06:12             dut.10.240.183.134: 
01/04/2021 23:06:12             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x100000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:14             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 20 is ready (tid=0x801942000;cpuset=[20])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:14             dut.10.240.183.134: quit
01/04/2021 23:06:14             dut.10.240.183.134: 
01/04/2021 23:06:14             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x200000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:15             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 21 is ready (tid=0x801942000;cpuset=[21])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:15             dut.10.240.183.134: quit
01/04/2021 23:06:16             dut.10.240.183.134: 
01/04/2021 23:06:16             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x400000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:17             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 22 is ready (tid=0x801942000;cpuset=[22])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:17             dut.10.240.183.134: quit
01/04/2021 23:06:18             dut.10.240.183.134: 
01/04/2021 23:06:18             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x800000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:19             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 23 is ready (tid=0x801942000;cpuset=[23])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:19             dut.10.240.183.134: quit
01/04/2021 23:06:19             dut.10.240.183.134: 
01/04/2021 23:06:19             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x1000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:21             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 24 is ready (tid=0x801942000;cpuset=[24])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:21             dut.10.240.183.134: quit
01/04/2021 23:06:21             dut.10.240.183.134: 
01/04/2021 23:06:21             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x2000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:23             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 25 is ready (tid=0x801942000;cpuset=[25])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:23             dut.10.240.183.134: quit
01/04/2021 23:06:23             dut.10.240.183.134: 
01/04/2021 23:06:23             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x4000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:25             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 26 is ready (tid=0x801942000;cpuset=[26])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:25             dut.10.240.183.134: quit
01/04/2021 23:06:25             dut.10.240.183.134: 
01/04/2021 23:06:25             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x8000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:27             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 27 is ready (tid=0x801942000;cpuset=[27])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:27             dut.10.240.183.134: quit
01/04/2021 23:06:27             dut.10.240.183.134: 
01/04/2021 23:06:27             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x10000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:29             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 28 is ready (tid=0x801942000;cpuset=[28])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:29             dut.10.240.183.134: quit
01/04/2021 23:06:29             dut.10.240.183.134: 
01/04/2021 23:06:29             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x20000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:30             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 29 is ready (tid=0x801942000;cpuset=[29])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:30             dut.10.240.183.134: quit
01/04/2021 23:06:31             dut.10.240.183.134: 
01/04/2021 23:06:31             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x40000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:32             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 30 is ready (tid=0x801942000;cpuset=[30])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:32             dut.10.240.183.134: quit
01/04/2021 23:06:33             dut.10.240.183.134: 
01/04/2021 23:06:33             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x80000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:34             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 31 is ready (tid=0x801942000;cpuset=[31])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:34             dut.10.240.183.134: quit
01/04/2021 23:06:34             dut.10.240.183.134: 
01/04/2021 23:06:34             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x100000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:36             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 32 is ready (tid=0x801942000;cpuset=[32])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:36             dut.10.240.183.134: quit
01/04/2021 23:06:36             dut.10.240.183.134: 
01/04/2021 23:06:36             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x200000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:38             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 33 is ready (tid=0x801942000;cpuset=[33])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:38             dut.10.240.183.134: quit
01/04/2021 23:06:38             dut.10.240.183.134: 
01/04/2021 23:06:38             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x400000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:40             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 34 is ready (tid=0x801942000;cpuset=[34])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:40             dut.10.240.183.134: quit
01/04/2021 23:06:40             dut.10.240.183.134: 
01/04/2021 23:06:40             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x800000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:42             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 35 is ready (tid=0x801942000;cpuset=[35])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:42             dut.10.240.183.134: quit
01/04/2021 23:06:42             dut.10.240.183.134: 
01/04/2021 23:06:42             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x1000000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:43             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 36 is ready (tid=0x801942000;cpuset=[36])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:43             dut.10.240.183.134: quit
01/04/2021 23:06:44             dut.10.240.183.134: 
01/04/2021 23:06:44             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x2000000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:45             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 37 is ready (tid=0x801942000;cpuset=[37])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:45             dut.10.240.183.134: quit
01/04/2021 23:06:46             dut.10.240.183.134: 
01/04/2021 23:06:46             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x4000000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:47             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 38 is ready (tid=0x801942000;cpuset=[38])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:47             dut.10.240.183.134: quit
01/04/2021 23:06:47             dut.10.240.183.134: 
01/04/2021 23:06:47             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x8000000000 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:49             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Checking presence of .so 'librte_eal.so.21.2'
EAL: Checking presence of .so 'librte_eal.so.21'
EAL: Checking presence of .so 'librte_eal.so'
EAL: Detected static linkage of DPDK
EAL: Ask a virtual area of 0x7000 bytes
EAL: Virtual area found at 0x1000000000 (size = 0x7000)
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: PCI scan found 140 devices
EAL: PCI driver net_e1000_igb for device 0000:05:00.0 wants IOVA as 'PA'
EAL: PCI driver net_e1000_igb for device 0000:05:00.1 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.0 wants IOVA as 'PA'
EAL: PCI driver net_i40e for device 0000:84:00.1 wants IOVA as 'PA'
EAL: Bus pci wants IOVA as 'PA'
EAL: Bus vdev wants IOVA as 'DC'
EAL: Selected IOVA mode 'PA'
EAL: Contigmem driver has 4 buffers, each of size 1GB
EAL: Ask a virtual area of 0x2e000 bytes
EAL: Virtual area found at 0x1000007000 (size = 0x2e000)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x1000 bytes
EAL: Virtual area found at 0x1000035000 (size = 0x1000)
EAL: Memseg list allocated at socket 0, page size 0x100000kB
EAL: Ask a virtual area of 0x1c0000000 bytes
EAL: Virtual area found at 0x1040000000 (size = 0x1c0000000)
EAL: VA reserved for memseg list at 0x1040000000, size 1c0000000
EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x6c0000000, len 1073741824
EAL: Mapped memory segment 1 @ 0x10c0000000: physaddr:0x1c0000000, len 1073741824
EAL: Mapped memory segment 2 @ 0x1140000000: physaddr:0x740000000, len 1073741824
EAL: Mapped memory segment 3 @ 0x11c0000000: physaddr:0x300000000, len 1073741824
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: Added 1024M to heap on socket 0
EAL: TSC frequency is ~2793330 KHz
EAL: Main lcore 39 is ready (tid=0x801942000;cpuset=[39])
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL:   0000:05:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:84:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x802a00000
EAL:   PCI memory mapped at 0x8019f2000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.0 (socket 0)
EAL: Interrupt handle 11 not supported
EAL: PCI device 0000:84:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1572 net_i40e
EAL:   PCI memory mapped at 0x803200000
EAL:   PCI memory mapped at 0x80282d000
EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:84:00.1 (socket 0)
EAL: Interrupt handle 12 not supported
APP: HPET is not enabled, using TSC as default timer
01/04/2021 23:06:49             dut.10.240.183.134: quit
01/04/2021 23:06:49             dut.10.240.183.134: 
01/04/2021 23:06:49                   TestCoremask: Test Case test_individual_coremask Result PASSED:
01/04/2021 23:06:49             dut.10.240.183.134: kill_all: called by dut and has no prefix list.
01/04/2021 23:06:50             dut.10.240.183.134: There are some dpdk process not free hugepage
01/04/2021 23:06:50             dut.10.240.183.134: **************************************
01/04/2021 23:06:50             dut.10.240.183.134: lsof: WARNING: compiled for FreeBSD release 12.1-RELEASE-p3; this is 12.1-RELEASE.
01/04/2021 23:06:50             dut.10.240.183.134: **************************************
01/04/2021 23:06:50                   TestCoremask: Test Case test_wrong_coremask Begin
01/04/2021 23:06:50             dut.10.240.183.134: 
01/04/2021 23:06:50                         tester: 
01/04/2021 23:06:50             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c GARBAGE -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0xJF -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0xFJF -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0xFFJ -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0xJ11 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x1J1 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x11J -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c JF -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c FJF -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c FFJ -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c J11 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 1J1 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 11J -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c jf -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c fjf -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:51             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:51             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c ffj -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:52             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:52             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c FF0x -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:52             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:52             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c ff0x -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:52             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:52             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c  -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:52             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:52             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0x -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:52             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:52             dut.10.240.183.134: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test  -c 0 -n 4 --log-level="lib.eal,8" 
01/04/2021 23:06:52             dut.10.240.183.134: EAL: Sysctl reports 40 cpus
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 0 on socket 0
EAL: Detected lcore 4 as core 0 on socket 0
EAL: Detected lcore 5 as core 0 on socket 0
EAL: Detected lcore 6 as core 0 on socket 0
EAL: Detected lcore 7 as core 0 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 0 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 0 on socket 0
EAL: Detected lcore 12 as core 0 on socket 0
EAL: Detected lcore 13 as core 0 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 0 on socket 0
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 0
EAL: Detected lcore 18 as core 0 on socket 0
EAL: Detected lcore 19 as core 0 on socket 0
EAL: Detected lcore 20 as core 0 on socket 0
EAL: Detected lcore 21 as core 0 on socket 0
EAL: Detected lcore 22 as core 0 on socket 0
EAL: Detected lcore 23 as core 0 on socket 0
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 0 on socket 0
EAL: Detected lcore 26 as core 0 on socket 0
EAL: Detected lcore 27 as core 0 on socket 0
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 0
EAL: Detected lcore 30 as core 0 on socket 0
EAL: Detected lcore 31 as core 0 on socket 0
EAL: Detected lcore 32 as core 0 on socket 0
EAL: Detected lcore 33 as core 0 on socket 0
EAL: Detected lcore 34 as core 0 on socket 0
EAL: Detected lcore 35 as core 0 on socket 0
EAL: Detected lcore 36 as core 0 on socket 0
EAL: Detected lcore 37 as core 0 on socket 0
EAL: Detected lcore 38 as core 0 on socket 0
EAL: Detected lcore 39 as core 0 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid coremask syntax

Usage: ./x86_64-native-bsdapp-gcc/app/test/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 128
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<int>   Set global log level
  --log-level=<type-match>:<int>
                      Set specific log level
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink       Unlink hugepage files after init
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
01/04/2021 23:06:52                   TestCoremask: Test Case test_wrong_coremask Result PASSED:
01/04/2021 23:06:52             dut.10.240.183.134: kill_all: called by dut and has no prefix list.
01/04/2021 23:06:53                            dts: 
TEST SUITE ENDED: TestCoremask

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dts] [PATCH V1] framework/dut: fix getting nic info failed in FreeBSD
  2021-04-01  7:38 [dts] [PATCH V1] framework/dut: fix getting nic info failed in FreeBSD Haiyang Zhao
  2021-04-01  7:51 ` Zhao, HaiyangX
@ 2021-04-07  2:12 ` Tu, Lijuan
  1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2021-04-07  2:12 UTC (permalink / raw)
  To: Zhao, HaiyangX, dts; +Cc: Zhao, HaiyangX

> Getting pci_id will be failed in FreeBSD and it causes get nic name and
> default_driver failed, and will cause many cases failed, fix it by assign the pci_id
> and reget the nic and driver name.
> 
> Signed-off-by: Haiyang Zhao <haiyangx.zhao@intel.com>

Applied

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-04-07  2:12 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-01  7:38 [dts] [PATCH V1] framework/dut: fix getting nic info failed in FreeBSD Haiyang Zhao
2021-04-01  7:51 ` Zhao, HaiyangX
2021-04-07  2:12 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).