[dts] [PATCH V1 1/2] test_plans/ftag_test_plan: remove ftag_test_plan

[dts] [PATCH V1 1/2] test_plans/ftag_test_plan: remove ftag_test_plan

[Yan Xia]

Signed-off-by: Yan Xia <yanx.xia@intel.com>
---
 test_plans/ftag_test_plan.rst | 110 ----------------------------------
 1 file changed, 110 deletions(-)
 delete mode 100644 test_plans/ftag_test_plan.rst

diff --git a/test_plans/ftag_test_plan.rst b/test_plans/ftag_test_plan.rst
deleted file mode 100644
index 413d0cee..00000000
--- a/test_plans/ftag_test_plan.rst
+++ /dev/null
@@ -1,110 +0,0 @@
-.. Copyright (c) <2016-2017>, Intel Corporation
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   - Neither the name of Intel Corporation nor the names of its
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-   OF THE POSSIBILITY OF SUCH DAMAGE.
-
-===========================
-FM10k FTAG Forwarding Tests
-===========================
-
-FM10000 supports the addition of a Fabric Tag (FTAG) to carry special
-information between Switches, between Switch and PCIe Host Interface or
-between Switch and Tunneling Engines. This tag is essential for a set of
-switches to behave like one switch (switch aggregation).
-
-The FTAG is placed at the beginning of the frame.  The case will validate
-packet forwarding function based on FTAG.
-
-Prerequisites
-=============
-
-Turn on CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD in common_linuxapp configuration file.
-Startup testpoint and export Port0 and Port1's GLORT ID.
-
-Strip port logic value from mac table information.
-There's the sample output from RubyRapid. From the output, port0's logic
-value is 4122 and port1's logic value is 4123::
-
-    <0>% show mac table all
-    MAC                Mode      FID1 FID2 Type   Value  Trig ...
-    ------------------ --------- ---- ---- ------ ------ -----
-    00:00:00:00:01:01  Dynamic   1    NA   Local  1      1
-    a0:36:9f:60:b6:6e  Static    1    NA   PF/VF  4506   1
-    a0:36:9f:60:b6:68  Static    1    NA   PF/VF  4123   1
-    00:00:00:00:01:00  Dynamic   1    NA   Local  1      1
-    a0:36:9f:60:b6:66  Static    1    NA   PF/VF  4122   1
-
-
-Strip port glort ID from stacking information.
-There's the sample output from RubyRapid. Logic port0's GLORT ID is 0x4000.
-Logic port1's GLORT ID is 0x4200::
-
-    show stacking logical-port all
-    <0>% show stacking logical-port all
-
-    SW  GLORT  LOGICAL PORT   PORT TYPE
-    ---- ----- --------------- ---------
-    ...
-    0 0x4000         4122    ?
-    0 0x4200         4123    ?
-
-Add port's GLORT ID into environment variables::
-
-    export PORT1_GLORT=0x4200
-    export PORT0_GLORT=0x4000
-
-Test Case: Ftag forwarding unit test
-====================================
-
-1. port 0 pci 85:00.0, port 1 pci 87:00.0,start test application::
-
-       ./x86_64-native-linuxapp-gcc/app/test -c f -n 4 -w 0000:85:00.0,enable_ftag=1 -w 0000:87:00.0,enable_ftag=1
-
-2. Run FTAG test function::
-
-    RTE>>fm10k_ftag_autotest
-
-3. Send one packet to Port0 and verify packet with ftag forwarded to Port1::
-
-    Receive 1 packets on port 0
-    test for FTAG RX passed
-    Send out 1 packets with FTAG on port 0
-    Receive 1 packets on port 1
-    test for FTAG TX passed
-    Test OK
-
-4. Send one packet to Port1 and verify packet with ftag forwarded to Port0::
-
-    Receive 1 packets on port 0
-    test for FTAG RX passed
-    Send out 1 packets with FTAG on port 0
-    Receive 1 packets on port 1
-    test for FTAG TX passed
-    Test OK
-- 
2.17.1

[dts] [PATCH V1 2/2] tests/ftag: remove TestSuite_ftag

[Yan Xia]

Signed-off-by: Yan Xia <yanx.xia@intel.com>
---
 tests/TestSuite_ftag.py | 172 ----------------------------------------
 1 file changed, 172 deletions(-)
 delete mode 100644 tests/TestSuite_ftag.py

diff --git a/tests/TestSuite_ftag.py b/tests/TestSuite_ftag.py
deleted file mode 100644
index 2f5c6c78..00000000
--- a/tests/TestSuite_ftag.py
+++ /dev/null
@@ -1,172 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-#   * Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-#   * Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-#   * Neither the name of Intel Corporation nor the names of its
-#     contributors may be used to endorse or promote products derived
-#     from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-
-"""
-DPDK Test suite.
-
-Test ftag feature
-
-"""
-
-import re
-import os
-import time
-import dut
-from config import PortConf
-from test_case import TestCase
-from pmd_output import PmdOutput
-from settings import FOLDERS
-from packet import Packet
-
-#
-#
-# Test class.
-#
-
-
-class TestFtag(TestCase):
-    #
-    # Test cases.
-    #
-
-    def set_up_all(self):
-        """
-        Run at the start of each test suite.
-        """
-        self.verify(self.nic in ['redrockcanyou','atwood','boulderrapid'], 'ftag test can not support %s nic'%self.nic) 
-        self.ports = self.dut.get_ports(self.nic)
-        self.verify(len(self.ports) >= 2, "Insufficient number of ports.")
-        patch_file = r'dep/fm10k-add-a-unit-test-for-FTAG-based-forwarding.patch'
-        patch_dst = "/tmp/"
-        self.dut.session.copy_file_to(patch_file, patch_dst)
-        self.patch_hotfix_dpdk(patch_dst + "fm10k-add-a-unit-test-for-FTAG-based-forwarding.patch", True)
-        self.dut.send_expect("sed -i -e '/CONFIG_RTE_VIRTIO_USER=y/a\CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD=y' config/common_linux", "# ")
-        self.dut.send_expect("sed -i -e '/SRCS-y += test_pmd_perf.c/a\SRCS-y += test_fm10k_ftag.c' app/test/Makefile", "# ")
-        self.dut.build_install_dpdk(self.dut.target)
-
-         
-    def set_up(self):
-        """
-        Run before each test case.
-        """
-        pass
-
-
-    def check_forwarding(self, txPort, rxPort, nic, received=True):
-        self.send_packet(txPort, rxPort, self.nic, received)
-   
-    def send_packet(self, txPort, rxPort, nic, received=True): 
-        """
-        Send packets according to parameters.
-        """
-        rxitf = self.tester.get_interface(self.tester.get_local_port(rxPort))
-        txitf = self.tester.get_interface(self.tester.get_local_port(txPort))
-
-        dmac_tx = self.dut.get_mac_address(txPort)
-        dmac_rx = self.dut.get_mac_address(rxPort)
-
-        pkg = 'Ether(dst="%s",src="52:00:00:00:00:00")/IP()/TCP()/("X"*46)' %dmac_rx 
-        self.tester.scapy_foreground()
-        self.tester.scapy_append('sendp(%s, iface="%s")' % (pkg, txitf))
-        self.tester.scapy_execute()
-        time.sleep(3)
-
-    def patch_hotfix_dpdk(self, patch_dir, on = True):
-        """
-        This function is to apply or remove patch for dpdk.
-        patch_dir: the abs path of the patch
-        on: True for apply, False for remove
-        """
-        if on:
-            self.dut.send_expect("patch -p1 < %s" % patch_dir, "#")
-        else:
-            self.dut.send_expect("patch -p1 -R < %s" % patch_dir, "#")
-
-
-    def test_ftag_function(self):
-        """
-        ftag functional test
-        """
-        self.dut.send_expect("./%s/app/testpmd -c f -n 4 -- -i" %self.dut.target,"testpmd", 60)
-        self.tx_port = self.ports[0]
-        self.rx_port = self.ports[1]
-
-        dmac_tx = self.dut.get_mac_address(self.tx_port)
-        dmac_rx = self.dut.get_mac_address(self.rx_port)
-        """
-        get port glort id in the mac table of testpoint switch
-        """
-        if self.kdriver == "fm10k": 
-            netobj = self.dut.ports_info[self.tx_port]['port']
-            port0_glortid = netobj.get_glortid_bymac(dmac_tx)
-            port1_glortid = netobj.get_glortid_bymac(dmac_rx)
-        
-        self.dut.send_expect("quit", "# ")
-        """
-        export port glort id
-        """
-        self.dut.send_expect("export PORT0_GLORT=%s" %port0_glortid, "#", 2)        
-        self.dut.send_expect("export PORT1_GLORT=%s" %port1_glortid, "#", 2)   
-        enable_ftag_ports = ''
-        for port in range(0,len(self.ports)):
-            pci_bus = self.dut.ports_info[port]['pci']
-            enable_ftag_ports += '-w %s,enable_ftag=1 ' % pci_bus
-        self.dut.send_expect("./%s/app/test -c f -n 4 %s" %(self.dut.target,enable_ftag_ports),"R.*T.*E.*>.*>", 60)
-
-        #fm10k ftag auto test
-        for txport in range(0,len(self.ports)):
-            for rxport in range(0,len(self.ports)):
-                self.dut.send_expect("fm10k_ftag_autotest", "Dump", 100)
-                self.check_forwarding(txport, rxport, self.nic, received=False)
-                out = self.dut.get_session_output()
-                print(("out:%s" %out))
-                self.verify("Test OK" in out, "Fail to do fm10k ftag test")
-        self.dut.send_expect("quit", "# ")
-
-    def tear_down(self):
-        """
-        Run after each test case. 
-        """    
-        pass
-
-        
-    def tear_down_all(self):
-        """
-        Run after each test suite.
-        """
-        self.dut.kill_all() 
-        self.dut.send_expect("sed -i  '/CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD=y/d' config/common_linux", "# ")
-        self.dut.send_expect("sed -i  '/SRCS-y += test_fm10k_ftag.c/d' app/test/Makefile", "# ")
-        patch_dst = "/tmp/"
-        self.patch_hotfix_dpdk(patch_dst + "fm10k-add-a-unit-test-for-FTAG-based-forwarding.patch", False)
-        self.dut.build_install_dpdk(self.dut.target)
-- 
2.17.1