From: Zhimin Huang <zhiminx.huang@intel.com>
To: dts@dpdk.org
Cc: Zhimin Huang <zhiminx.huang@intel.com>
Subject: [dts] [PATCH V2] tests/generic_filter: use flow api replace legancy
Date: Thu, 27 May 2021 23:30:47 +0800 [thread overview]
Message-ID: <20210527153047.24627-1-zhiminx.huang@intel.com> (raw)
*.use flow api replace legancy filter command
Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>
---
tests/TestSuite_generic_filter.py | 41 ++++++++++++++++++-------------
1 file changed, 24 insertions(+), 17 deletions(-)
diff --git a/tests/TestSuite_generic_filter.py b/tests/TestSuite_generic_filter.py
index d4ea8926..9990b234 100644
--- a/tests/TestSuite_generic_filter.py
+++ b/tests/TestSuite_generic_filter.py
@@ -119,6 +119,12 @@ class TestGeneric_filter(TestCase):
"""
Run before each test case.
"""
+ if self._suite_result.test_case == "test_128_queues":
+ self.logger.info('will rebuild dpdk')
+ self.dut.send_expect(
+ "sed -i -e 's/#define IXGBE_NONE_MODE_TX_NB_QUEUES 64$/#define IXGBE_NONE_MODE_TX_NB_QUEUES 128/' drivers/net/ixgbe/ixgbe_ethdev.h",
+ "# ", 30)
+ self.dut.build_install_dpdk(self.target)
pass
def filter_send_packet(self, type):
@@ -711,8 +717,6 @@ class TestGeneric_filter(TestCase):
set_filter_flag = 1
packet_flag = 1
if self.kdriver == "ixgbe":
- self.dut.send_expect("sed -i -e 's/#define IXGBE_NONE_MODE_TX_NB_QUEUES 64$/#define IXGBE_NONE_MODE_TX_NB_QUEUES 128/' drivers/net/ixgbe/ixgbe_ethdev.h", "# ",30)
- self.dut.build_install_dpdk(self.target)
global valports
total_mbufs = self.request_mbufs(128) * len(valports)
self.pmdout.start_testpmd(
@@ -729,7 +733,6 @@ class TestGeneric_filter(TestCase):
"vlan set filter off %s" % valports[0], "testpmd> ")
self.dut.send_expect(
"vlan set filter off %s" % valports[1], "testpmd> ")
- frames_to_send = 1
queue = ['64', '127', '128']
for i in [0, 1, 2]:
@@ -739,35 +742,34 @@ class TestGeneric_filter(TestCase):
if 'Invalid RX queue %s' % (queue[i]) not in out:
set_filter_flag = 0
break
- out = self.dut.send_expect(
- "5tuple_filter %s add dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port %s src_port 1 protocol 0x06 mask 0x1f tcp_flags 0x0 priority 3 queue %s " % (valports[0], (i + 1), queue[i]), "testpmd> ")
- if 'error' not in out:
+ cmd = "flow create {} ingress pattern eth / ".format(
+ valports[0]) + "ipv4 dst is 2.2.2.5 src is 2.2.2.4 / tcp dst is {} src is 1 / ".format(
+ i + 1) + "end actions queue index {} / end".format(queue[i])
+ out = self.dut.send_expect(cmd, "testpmd> ")
+ if 'Invalid argument' not in out:
set_filter_flag = 0
break
continue
else:
self.dut.send_expect("set stat_qmap rx %s %s %s" %
(valports[0], queue[i], (i + 1)), "testpmd> ")
- out = self.dut.send_expect("5tuple_filter %s add dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port %s src_port 1 protocol 0x06 mask 0x1f tcp_flags 0x0 priority %d queue %s " % (
- valports[0], (i + 1), (3 - i), queue[i]), "testpmd> ")
+ cmd = "flow create {} ingress pattern eth / ".format(
+ valports[0]) + "ipv4 dst is 2.2.2.5 src is 2.2.2.4 / tcp dst is {} src is 1 / ".format(
+ i + 1) + "end actions queue index {} / end".format(queue[i])
+ self.dut.send_expect(cmd, "testpmd> ")
self.dut.send_expect("start", "testpmd> ", 120)
global filters_index
filters_index = i
self.filter_send_packet("packet")
time.sleep(1)
out = self.dut.send_expect("stop", "testpmd> ")
- cmd = "Stats reg %s RX-packets: ([0-9]+)" % (
- i + 1)
- result_scanner = r"%s" % cmd
- scanner = re.compile(result_scanner, re.DOTALL)
- m = scanner.search(out)
- cur_pkt = m.group(1)
- if int(cur_pkt) != frames_to_send:
+ p = re.compile(r"Forward Stats for RX Port= \d+/Queue=(\s?\d+)")
+ res = p.findall(out)
+ queues = [int(i) for i in res]
+ if queues[0] != int(queue[i]):
packet_flag = 0
break
self.dut.send_expect("quit", "#", timeout=30)
- self.dut.send_expect("sed -i -e 's/#define IXGBE_NONE_MODE_TX_NB_QUEUES 128$/#define IXGBE_NONE_MODE_TX_NB_QUEUES 64/' drivers/net/ixgbe/ixgbe_ethdev.h", "# ",30)
- self.dut.build_install_dpdk(self.target)
self.verify(set_filter_flag == 1, "set filters error")
self.verify(packet_flag == 1, "packet pass assert error")
else:
@@ -853,6 +855,11 @@ class TestGeneric_filter(TestCase):
Run after each test case.
"""
self.dut.kill_all()
+ if self._suite_result.test_case == "test_128_queues":
+ self.dut.send_expect(
+ "sed -i -e 's/#define IXGBE_NONE_MODE_TX_NB_QUEUES 128$/#define IXGBE_NONE_MODE_TX_NB_QUEUES 64/' drivers/net/ixgbe/ixgbe_ethdev.h",
+ "# ", 30)
+ self.dut.build_install_dpdk(self.target)
def tear_down_all(self):
pass
--
2.17.1
next reply other threads:[~2021-05-27 6:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-27 15:30 Zhimin Huang [this message]
2021-05-27 7:00 ` Huang, ZhiminX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210527153047.24627-1-zhiminx.huang@intel.com \
--to=zhiminx.huang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).