From: Yinan Wang <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Yinan Wang <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans/vm2vm_virtio_pmd_test_plan
Date: Wed, 16 Jun 2021 05:40:50 -0400 [thread overview]
Message-ID: <20210616094050.193455-1-yinan.wang@intel.com> (raw)
Add three cbdma cases in vm2vm virtio-pmd suite.
Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
test_plans/vm2vm_virtio_pmd_test_plan.rst | 230 +++++++++++++++++++++-
1 file changed, 229 insertions(+), 1 deletion(-)
diff --git a/test_plans/vm2vm_virtio_pmd_test_plan.rst b/test_plans/vm2vm_virtio_pmd_test_plan.rst
index db410e48..20314d41 100644
--- a/test_plans/vm2vm_virtio_pmd_test_plan.rst
+++ b/test_plans/vm2vm_virtio_pmd_test_plan.rst
@@ -593,4 +593,232 @@ Test Case 8: VM2VM vhost-user/virtio1.1-pmd with normal path
xxxxx
Throughput (since last show)
RX-pps: xxx
- TX-pps: xxx
+ TX-pps: xxx
+
+Test Case 9: VM2VM virtio-pmd split ring mergeable path 8 queues CBDMA enable with server mode stable test
+==========================================================================================================
+
+1. Bind 16 cbdma channels to igb_uio driver, then launch the testpmd with 2 vhost port and 8 queues by below commands::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+2. Launch VM1 and VM2 using qemu5.2.0::
+
+ taskset -c 6-16 /home/qemu-install/qemu-5.2/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 17-27 /home/qemu-install/qemu-5.2/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+3. On VM1 and VM2, bind virtio device with vfio-pci driver::
+
+ modprobe vfio
+ modprobe vfio-pci
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+
+4. Launch testpmd in VM1::
+
+ ./dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>start
+
+5. Launch testpmd in VM2, sent imix pkts from VM2::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
+ testpmd>start tx_first 1
+
+6. Check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ testpmd>show port stats all
+ testpmd>stop
+
+7. Relaunch and start vhost side testpmd with below cmd, change cbdma threshold for one vhost port's cbdma channels::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=64' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+8. Send pkts by testpmd in VM2, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ testpmd>stop
+ testpmd>start tx_first 1
+ testpmd>show port stats all
+ testpmd>stop
+
+9. Rerun step 7-8 for 10 times.
+
+Test Case 10: VM2VM virtio-pmd split ring mergeable path dynamic queue size CBDMA enable with server mode test
+==============================================================================================================
+
+1. Bind 16 cbdma channels to igb_uio driver, then launch the testpmd with 2 vhost ports below commands::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
+ testpmd>vhost enable tx all
+ testpmd>start
+
+2. Launch VM1 and VM2 using qemu5.2.0::
+
+ taskset -c 6-16 /home/qemu-install/qemu-5.2/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 17-27 /home/qemu-install/qemu-5.2/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+3. On VM1 and VM2, bind virtio device with vfio-pci driver::
+
+ modprobe vfio
+ modprobe vfio-pci
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+
+4. Launch testpmd in VM1::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>start
+
+5. Launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins and 4 queues (queue0 to queue3) have packets rx/tx::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+ testpmd>stop
+
+6. Relaunch and start vhost side testpmd with eight queues, change cbdma threshold for one vhost port's cbdma channels::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=64' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+7. Send pkts by testpmd in VM2, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ testpmd>stop
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+ testpmd>stop
+
+8. Rerun step 6-7 for 10 times.
+
+Test Case 11: VM2VM virtio-pmd packed ring mergeable path 8 queues CBDMA enable test
+=====================================================================================
+
+1. Bind 16 cbdma channels to igb_uio driver, then launch the testpmd with 2 vhost port and 8 queues by below commands::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+2. Launch VM1 and VM2 with qemu 5.2.0::
+
+ taskset -c 6-16 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+ taskset -c 17-27 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+3. On VM1 and VM2, bind virtio device with vfio-pci driver::
+
+ modprobe vfio
+ modprobe vfio-pci
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+
+4. Launch testpmd in VM1::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>start
+
+5. Launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>set txpkts 64,256,512,1024,20000,64,256,512,1024,20000
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+ testpmd>stop
+
+6. Quit VM2 and relaunch VM2 with split ring::
+
+ taskset -c 6-16 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+7. Bind virtio device with vfio-pci driver, launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ modprobe vfio
+ modprobe vfio-pci
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>set txpkts 64,256,512,1024,20000,64,256,512,1024,20000
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+ testpmd>stop
--
2.25.1
reply other threads:[~2021-06-16 0:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210616094050.193455-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).