[dts] [PATCH v2] test_plans/vswitch_sample_cbdma: improve test coverage

[dts] [PATCH v2] test_plans/vswitch_sample_cbdma: improve test coverage

[Yinan Wang]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 24731 bytes --]

Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
 test_plans/vswitch_sample_cbdma_test_plan.rst | 329 ++++++++++++------
 1 file changed, 227 insertions(+), 102 deletions(-)

diff --git a/test_plans/vswitch_sample_cbdma_test_plan.rst b/test_plans/vswitch_sample_cbdma_test_plan.rst
index 974c2ee2..8fcf0b0a 100644
--- a/test_plans/vswitch_sample_cbdma_test_plan.rst
+++ b/test_plans/vswitch_sample_cbdma_test_plan.rst
@@ -1,3 +1,35 @@
+.. Copyright (c) <2021>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
 ========================================================
 Vswitch sample test with vhost async data path test plan
 ========================================================
@@ -6,17 +38,10 @@ Description
 ===========
 
 Vswitch sample can leverage IOAT to accelerate vhost async data-path from dpdk 20.11. This plan test
-vhost DMA operation callbacks for CBDMAV PMD and vhost async data-path in vhost sample. Also compare
-the performance between CPU copy, CBDMA copy and Sync copy. 
-CPU copy means vhost enqueue w/o cbdma channel; CBDMA copy needs vhost enqueue with cbdma channel
-using parameter '-dmas'; Sync copy needs vhost enqueue with cbdma channel, but threshold ( can be
-adjusted by change value of f.async_threshold in dpdk code) is larger than forwarding packet length.
-
-CBDMA performance indicator
-===========================
-
-(1)CPU copy vs. sync copy delta < 10% for 64B packet size
-(2)CBDMA copy vs sync copy delta > 5% for 1518 packet size
+vhost DMA operation callbacks for CBDMA PMD and vhost async data-path in vhost sample.
+From 20.11 to 21.02, only split ring support cbdma copy with vhost enqueue direction;
+from 21.05,packed ring also can support cbdma copy with vhost enqueue direction;
+from 21.08, split ring support cbdma copy both vhost enqueue and dequeue direction.
 
 Prerequisites
 =============
@@ -38,175 +63,152 @@ Modify the testpmd code as following::
 Test Case1: PVP performance check with CBDMA channel using vhost async driver
 =============================================================================
 
-1. Adjust dpdk code as below::
-
-	--- a/examples/vhost/main.c
-	+++ b/examples/vhost/main.c
-	@@ -1343,7 +1343,7 @@ new_device(int vid)
-
-        if (async_vhost_driver) {
-                	f.async_inorder = 1;
-	-               f.async_threshold = 256;
-	+               f.async_threshold = 1518;
-                	return rte_vhost_async_channel_register(vid, VIRTIO_RXQ,
-                        	f.intval, &channel_ops);
-        }
-
-2. Bind physical port to vfio-pci and CBDMA channel to igb_uio.
+1. Bind physical port to vfio-pci and CBDMA channel to igb_uio.
 
-3. On host, launch dpdk-vhost by below command::
+2. On host, launch dpdk-vhost by below command::
 
 	./dpdk-vhost -c 0x1c000000 -n 4 -- \
-	-p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat --stats 1 --socket-file /tmp/vhost-net --dmas [txd0@00:04.0]
+	-p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat --stats 1 --socket-file /tmp/vhost-net --dmas [txd0@0000:00:04.0] --client
 
-4. Launch virtio-user with testpmd::
+3. Launch virtio-user with packed ring::
 
 	./dpdk-testpmd -l 29-30 -n 4 --no-pci --file-prefix=testpmd0 \
-	--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
+	--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1,mrg_rxbuf=0,in_order=1,vectorized=1,packed_vq=1,server=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
 
-5. Start pkts from virtio-user side to let vswitch know the mac addr::
+4. Start pkts from virtio-user side to let vswitch know the mac addr::
 
-	testpmd>set fwd mac #if use io fwd ,ixia can't receive packets
+	testpmd>set fwd mac
 	testpmd>start tx_first
-	testpmd>stop
-	testpmd>start #start to forward
-
-6. Inject different length pkts (packets length=64,512,1024,1518) seperately with VLAN_id=1000 and dest_mac=virtio_mac_addresss ( specific in above cmd with 00:11:22:33:44:10) to NIC using packet generator, record performance number.
-
-7. Adjust vswitch code as below, re-test step 3-6 and record perfromance of different packet length::
-
-	--- a/examples/vhost/main.c
-	+++ b/examples/vhost/main.c
-	@@ -1343,7 +1343,7 @@ new_device(int vid)
-
-        if (async_vhost_driver) {
-                	f.async_inorder = 1;
-	-               f.async_threshold = 256;
-	+               f.async_threshold = 0;
-                	return rte_vhost_async_channel_register(vid, VIRTIO_RXQ,
-                        	f.intval, &channel_ops);
-        }
 
-8. Re-test step 3-6 except to launch dpdk-vhost by below command, record perfromance of different packet length::
+5. Inject pkts (packets length=64...1518) separately with VLAN_id=1000 and dest_mac=virtio_mac_addresss (specific in above cmd with 00:11:22:33:44:10) to NIC using packet generator, record pvp (PG>nic>vswitch>virtio-user>vswitch>nic>PG) performance number can get expected.
 
-	./dpdk-vhost -c 0x1c000000 -n 4 -- -p 0x1 --mergeable 1 --vm2vm 1 --stats 1 --socket-file /tmp/vhost-net
+6. Quit and re-launch virtio-user with split ring::
 
-9. Compare performance, check below two performance indicator::
+	./dpdk-testpmd -l 29-30 -n 4 --no-pci --file-prefix=testpmd0 \
+	--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1,mrg_rxbuf=1,in_order=1,vectorized=1,server=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
 
-	(1)CPU copy vs. sync copy delta < 10% for 64B packet size
-	(2)CBDMA copy vs sync copy delta > 5% for 1518 packet size
+7. Re-test step 4-5, record performance of different packet length.
 
-Test Case2: PV test with multiple CBDMA channels using vhost async driver
-==========================================================================
+Test Case2: PVP test with two VM and two CBDMA channels using vhost async driver
+=================================================================================
 
 1. Bind one physical ports to vfio-pci and two CBDMA channels to igb_uio.
 
 2. On host, launch dpdk-vhost by below command::
 
 	./dpdk-vhost -l 26-28 -n 4 -- \
-	-p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat --stats 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@00:04.0,txd1@00:04.1] --client
+	-p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat --stats 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@0000:00:04.0,txd1@0000:00:04.1] --client
 
 3. launch two virtio-user ports::
 
 	./dpdk-testpmd -l 29-30 -n 4 --no-pci --file-prefix=testpmd0 \
-	--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net0,queues=1,server=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
+	--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net0,queues=1,server=1,mrg_rxbuf=0,in_order=1,vectorized=1,packed_vq=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
 	
 	./dpdk-testpmd -l 31-32 -n 4 --no-pci --file-prefix=testpmd1 \
-	--vdev=net_virtio_user0,mac=00:11:22:33:44:11,path=/tmp/vhost-net1,queues=1,server=1,mrg_rxbuf=0,in_order=1,vectorized=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
+	--vdev=net_virtio_user0,mac=00:11:22:33:44:11,path=/tmp/vhost-net1,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
 
 4. Start pkts from two virtio-user side individually to let vswitch know the mac addr::
 
-	testpmd0>start tx_first
+	testpmd0>set fwd mac
+	testpmd1>set fwd mac
+	testpmd1>start tx_first
 	testpmd1>start tx_first
 
-5. Inject 1518B packets with VLAN_id=1000 and dest_mac=virtio_mac_addresss (00:11:22:33:44:10 and 00:11:22:33:44:11) to NIC using packet generator,check two virtio-user ports can receive according packets.
+5. Inject IMIX packets (64b...1518b) with VLAN_id=1000 and dest_mac=virtio_mac_addresss (00:11:22:33:44:10 and 00:11:22:33:44:11) to NIC using packet generator,record performance number can get expected from Packet generator rx side.
 
 6. Stop dpdk-vhost side and relaunch it with same cmd as step2.
 
-7.Start pkts from two virtio-user side individually to let vswitch know the mac addr, check two virtio-user ports still can receive according packets and get same throughput as step5::
+7. Start pkts from two virtio-user side individually to let vswitch know the mac addr::
+
+    testpmd0>stop
+    testpmd0>start tx_first
+    testpmd1>stop
+    testpmd1>start tx_first
 
-        testpmd0>stop
-        testpmd0>start tx_first
-        testpmd1>stop
-        testpmd1>start tx_first
+8. Inject IMIX packets (64b...1518b) to NIC using packet generator, ensure get same throughput as step5.
 
-Test Case3: VM2VM performance test with two CBDMA channels using vhost async driver
-====================================================================================
+Test Case3: VM2VM forwarding test with two CBDMA channels
+=========================================================
 
 1.Bind one physical ports to vfio-pci and two CBDMA channels to igb_uio.
 
 2. On host, launch dpdk-vhost by below command::
 
-	./dpdk-vhost -l 26-28 -n 4 -- -p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat \
-	--socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@00:04.0,txd1@00:04.1]
+	./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -- -p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat \
+	--socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@0000:00:04.0,txd1@0000:00:04.1]  --client
 
 3. Launch virtio-user::
 
-	./dpdk-testpmd -l 29-30 -n 4 --no-pci --file-prefix=testpmd0 \
-	--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net0,queues=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
+	./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-30 -n 4 --no-pci --file-prefix=testpmd0 \
+	--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net0,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1,packed_vq=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
 
-	./dpdk-testpmd -l 31-32 -n 4 --no-pci --file-prefix=testpmd1 \
-	--vdev=net_virtio_user0,mac=00:11:22:33:44:11,path=/tmp/vhost-net0,queues=1,mrg_rxbuf=0,in_order=1,vectorized=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
+	./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 31-32 -n 4 --no-pci --file-prefix=testpmd1 \
+	--vdev=net_virtio_user0,mac=00:11:22:33:44:11,path=/tmp/vhost-net1,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
 
-4. Start pkts from two virtio-user sides, record performance number with txpkts=256 and 2000 from testpmd1 seperately::
+4. Loop pkts between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected::
 
 	testpmd0>set fwd mac
 	testpmd0>start tx_first
 	testpmd0>stop
 	testpmd0>set eth-peer 0 00:11:22:33:44:11
 	testpmd0>start
-
 	testpmd1>set fwd mac
 	testpmd1>set eth-peer 0 00:11:22:33:44:10
+	testpmd1>set txpkts 64
+	testpmd1>start tx_first
+	testpmd1>show port stats all
+	testpmd1>stop
 	testpmd1>set txpkts 2000
 	testpmd1>start tx_first
 	testpmd1>show port stats all
 	testpmd1>stop
-	testpmd1>set txpkts 256
+	testpmd1>set txpkts 2000,2000,2000,2000
+	testpmd1>start tx_first
+	testpmd1>show port stats all
+	testpmd1>stop
+	testpmd1>set txpkts 64,256,2000,64,256,2000
 	testpmd1>start tx_first
 	testpmd1>show port stats all
 
-5. Re-test step 2-4 except to launch dpdk-vhost by below command, record perfromance::
-
-	./dpdk-vhost -l 27-28 -n 4 -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1
+5. Stop dpdk-vhost side and relaunch it with same cmd as step2.
 
-6. Compare perfromance number, when txpkts=2000, first test has better performance; while txpkts=256, the second test has better performance.
+6. Rerun step 4.
 
-Test Case4: VM2VM test with 2 vhost device using vhost async driver
-=======================================================================
+Test Case4: VM2VM test with cbdma channels register/unregister stable check
+============================================================================
 
 1. Bind one physical ports to vfio-pci and two CBDMA channels to igb_uio.
 
 2. On host, launch dpdk-vhost by below command::
 
-	./dpdk-vhost -l 26-28 -n 4 -- -p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat \
-	--socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@00:04.0,txd1@00:04.1]
+    ./dpdk-vhost -l 26-28 -n 4 -- -p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat \
+    --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@0000:00:04.0,txd1@0000:00:04.1] --client
 
-3. Start VM0::
+3. Start VM0 with qemu-5.2.0::
 
- 	/home/qemu-install/qemu-4.2.1/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
+ 	qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
         -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
         -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img  \
         -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
         -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
         -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
         -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-        -chardev socket,id=char0,path=/tmp/vhost-net0 \
+        -chardev socket,id=char0,path=/tmp/vhost-net0,server \
         -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-        -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+        -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
 
-4. Start VM1::
+4. Start VM1 with qemu-5.2.0::
 
-	/home/qemu-install/qemu-4.2.1/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
+	qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
         -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
         -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img  \
         -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
         -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
         -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-        -netdev user,id=nttsip1,hostfwd=tcp:10.67.119.61:6003-:22 \
-        -chardev socket,id=char0,path=/tmp/vhost-net1 \
+        -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+        -chardev socket,id=char0,path=/tmp/vhost-net1,server \
         -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-        -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+        -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
 
 5. Bind virtio port to vfio-pci in both two VMs::
 
@@ -219,30 +221,153 @@ Test Case4: VM2VM test with 2 vhost device using vhost async driver
 
 	./dpdk-testpmd -l 1-2 -n 4 -- -i --rxq=1 --txq=1 --nb-cores=1 --txd=1024 --rxd=1024
 
-7. Start pkts from two virtio-pmd, record performance number with txpkts=256 and 2000 from testpmd1 seperately::
+7. Loop pkts between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected::
 
 	testpmd0>set fwd mac
 	testpmd0>start tx_first
 	testpmd0>stop
 	testpmd0>set eth-peer 0 52:54:00:00:00:02
 	testpmd0>start
-
 	testpmd1>set fwd mac
 	testpmd1>set eth-peer 0 52:54:00:00:00:01
+	testpmd1>set txpkts 64
+	testpmd1>start tx_first
+	testpmd1>show port stats all
+	testpmd1>stop
 	testpmd1>set txpkts 2000
 	testpmd1>start tx_first
 	testpmd1>show port stats all
 	testpmd1>stop
-	testpmd1>set txpkts 256
+	testpmd1>set txpkts 2000,2000,2000,2000
+	testpmd1>start tx_first
+	testpmd1>show port stats all
+	testpmd1>stop
+	testpmd1>set txpkts 64,256,2000,64,256,2000
 	testpmd1>start tx_first
 	testpmd1>show port stats all
 
-8. Inject traffic with VLAN_id=1000 and dest_mac=virtio_mac_addresss (52:54:00:00:00:02 and 52:54:00:00:00:02) to NIC using packet generator, check two virtio-pmd can receive according packets.
-
-9. Quit two testpmd in two VMs, bind virtio-pmd port to virtio-pci,then bind port back to vfio-pci, rerun below cmd 50 times::
+8. Quit two testpmd in two VMs, bind virtio-pmd port to virtio-pci,then bind port back to vfio-pci, rerun below cmd 50 times::
 
 	./usertools/dpdk-devbind.py -u 00:05.0
 	./usertools/dpdk-devbind.py --bind=virtio-pci 00:05.0
 	./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
 
-10. Rerun step 6-8，check vhost can stable work.
+9. Restart vhost, then rerun step 7，check vhost can stable work and get expected throughput.
+
+Test Case5: VM2VM split ring test with iperf and reconnect stable check
+=======================================================================
+
+1. Bind one physical ports to vfio-pci and two CBDMA channels to igb_uio.
+
+2. On host, launch dpdk-vhost by below command::
+
+	./dpdk-vhost -l 26-28 -n 4 -- -p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat \
+	--socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@0000:00:04.0,txd1@0000:00:04.1] --client
+
+3. Start VM0 with qemu-5.2.0::
+
+ 	qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
+        -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+        -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img  \
+        -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+        -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+        -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+        -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+        -chardev socket,id=char0,path=/tmp/vhost-net0,server \
+        -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+        -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+4. Start VM1 with qemu-5.2.0::
+
+	qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
+        -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+        -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img  \
+        -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+        -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+        -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+        -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+        -chardev socket,id=char0,path=/tmp/vhost-net1,server \
+        -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+        -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+
+5. On VM1, set virtio device IP and run arp protocal::
+
+    ifconfig ens5 1.1.1.2
+    arp -s 1.1.1.8 52:54:00:00:00:02
+
+6. On VM2, set virtio device IP and run arp protocal::
+
+    ifconfig ens5 1.1.1.8
+    arp -s 1.1.1.2 52:54:00:00:00:01
+
+7. Check the iperf performance between two VMs by below commands::
+
+    Under VM1, run: `iperf -s -i 1`
+    Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+8. Check iperf throughput can get x Gbits/sec.
+
+9. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+
+     Under VM1, run: `scp [xxx] root@1.1.1.8:/`   [xxx] is the file name
+
+10. Relaunch vhost-dpdk, then rerun step 7-9 five times.
+
+Test Case6: VM2VM packed ring test with iperf and reconnect stable test
+=======================================================================
+
+1. Bind one physical ports to vfio-pci and two CBDMA channels to igb_uio.
+
+2. On host, launch dpdk-vhost by below command::
+
+	./dpdk-vhost -l 26-28 -n 4 -- -p 0x1 --mergeable 1 --vm2vm 1 --dma-type ioat \
+	--socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@0000:00:04.0,txd1@0000:00:04.1]
+
+3. Start VM0 with qemu-5.2.0::
+
+ 	qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
+        -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+        -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img  \
+        -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+        -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+        -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+        -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+        -chardev socket,id=char0,path=/tmp/vhost-net0 \
+        -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+        -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+4. Start VM1 with qemu-5.2.0::
+
+	qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
+        -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+        -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img  \
+        -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+        -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+        -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+        -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+        -chardev socket,id=char0,path=/tmp/vhost-net1 \
+        -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+        -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+5. On VM1, set virtio device IP and run arp protocal::
+
+    ifconfig ens5 1.1.1.2
+    arp -s 1.1.1.8 52:54:00:00:00:02
+
+6. On VM2, set virtio device IP and run arp protocal::
+
+    ifconfig ens5 1.1.1.8
+    arp -s 1.1.1.2 52:54:00:00:00:01
+
+7. Check the iperf performance between two VMs by below commands::
+
+    Under VM1, run: `iperf -s -i 1`
+    Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+8. Check iperf throughput can get x Gbits/sec.
+
+9. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+
+     Under VM1, run: `scp [xxx] root@1.1.1.8:/`   [xxx] is the file name
+
+10. Rerun step 7-9 five times.
\ No newline at end of file
-- 
2.25.1

Re: [dts] [PATCH v2] test_plans/vswitch_sample_cbdma: improve test coverage

[Tu, Lijuan]

> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Yinan Wang
> Sent: 2021年7月3日 1:27
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v2] test_plans/vswitch_sample_cbdma: improve test
> coverage
> 
> Signed-off-by: Yinan Wang <yinan.wang@intel.com>

Applied, thanks