test suite reviews and discussions
 help / color / mirror / Atom feed
From: Yan Xia <yanx.xia@intel.com>
To: dts@dpdk.org
Cc: Yan Xia <yanx.xia@intel.com>
Subject: [dts] [PATCH V3] tests/generic_flow_api: add test case dual_vlan
Date: Fri, 30 Jul 2021 14:19:03 +0000	[thread overview]
Message-ID: <20210730141903.26737-1-yanx.xia@intel.com> (raw)

move test_dual_vlan in TestSuite_fortville_rss_granularity_config to TestSuite_generic_flow_api, then modify lengacy command.

Signed-off-by: Yan Xia <yanx.xia@intel.com>
---
 tests/TestSuite_generic_flow_api.py | 136 ++++++++++++++++++++++++++++
 1 file changed, 136 insertions(+)

diff --git a/tests/TestSuite_generic_flow_api.py b/tests/TestSuite_generic_flow_api.py
index e8171589..b97b49f2 100644
--- a/tests/TestSuite_generic_flow_api.py
+++ b/tests/TestSuite_generic_flow_api.py
@@ -59,6 +59,8 @@ from scapy.utils import rdpcap
 
 MAX_VLAN = 4095
 MAX_QUEUE = 15
+testQueues = [16]
+reta_lines = []
 MAX_VFQUEUE = 3
 MAX_PORT = 65535
 MAX_TTL = 255
@@ -642,6 +644,78 @@ class TestGeneric_flow_api(TestCase):
         self.pkt_obj.append_pkt(pktstr)
         self.pkt_obj.send_pkt(self.tester, tx_port=self.tester_itf, count=count)
 
+    def send_packet(self, itf, tran_type, enable=None):
+        """
+        Sends packets for l2_payload.
+        """
+        global reta_lines
+        self.tester.scapy_foreground()
+        self.dut.send_expect("start", "testpmd>")
+        mac = self.dut.get_mac_address(0)
+
+        # send packet with different source and dest ip
+        if tran_type == "l2_payload":
+            if enable == "ovlan":
+                packet = r'sendp([Ether(dst="%s", src=get_if_hwaddr("%s"))/Dot1Q(id=0x8100,vlan=4)/Dot1Q(id=0x8100,vlan=2,type=0xaaaa)/Raw(load="x"*60)], iface="%s")' % (
+                mac, itf, itf)
+            elif enable == "ivlan":
+                packet = r'sendp([Ether(dst="%s", src=get_if_hwaddr("%s"))/Dot1Q(id=0x8100,vlan=1)/Dot1Q(id=0x8100,vlan=3,type=0xaaaa)/Raw(load="x"*60)], iface="%s")' % (
+                mac, itf, itf)
+            else:
+                packet = r'sendp([Ether(dst="%s", src=get_if_hwaddr("%s"))/Dot1Q(id=0x8100,vlan=1)/Dot1Q(id=0x8100,vlan=2,type=0xaaaa)/Raw(load="x"*60)], iface="%s")' % (
+                mac, itf, itf)
+            self.tester.scapy_append(packet)
+            self.tester.scapy_execute()
+            time.sleep(.5)
+        else:
+            print("\ntran_type error!\n")
+
+        out = self.dut.get_session_output(timeout=1)
+        self.dut.send_expect("stop", "testpmd>")
+        lines = out.split("\r\n")
+        reta_line = {}
+        # collect the hash result and the queue id
+        for line in lines:
+            line = line.strip()
+            if len(line) != 0 and line.strip().startswith("port "):
+                reta_line = {}
+                rexp = r"port (\d)/queue (\d{1,2}): received (\d) packets"
+                m = re.match(rexp, line.strip())
+                if m:
+                    reta_line["port"] = m.group(1)
+                    reta_line["queue"] = m.group(2)
+
+            elif len(line) != 0 and line.startswith(("src=",)):
+                for item in line.split("-"):
+                    item = item.strip()
+                    if(item.startswith("RSS hash")):
+                        name, value = item.split("=", 1)
+
+                reta_line[name.strip()] = value.strip()
+                reta_lines.append(reta_line)
+
+        self.append_result_table()
+
+    def append_result_table(self):
+        """
+        Append the hash value and queue id into table.
+        """
+
+        global reta_lines
+
+        # append the the hash value and queue id into table
+        self.result_table_create(
+            ['packet index', 'hash value', 'hash index', 'queue id'])
+        i = 0
+
+        for tmp_reta_line in reta_lines:
+
+            # compute the hash result of five tuple into the 7 LSBs value.
+            hash_index = int(tmp_reta_line["RSS hash"], 16)
+            self.result_table_add(
+                [i, tmp_reta_line["RSS hash"], hash_index, tmp_reta_line["queue"]])
+            i = i + 1
+
     def test_syn_filter(self):
         """
         Only supported by ixgbe and igb.
@@ -2351,6 +2425,68 @@ class TestGeneric_flow_api(TestCase):
         rule_num = extrapkt_rulenum['rulenum']
         self.verify_rulenum(rule_num)
 
+    def test_dual_vlan(self):
+        """
+        Test with flow type dual vlan(QinQ).
+        """
+        flag = 1
+
+        for queue in testQueues:
+            self.pmdout.start_testpmd(
+                "Default", "  --portmask=0x1 --rxq=%d --txq=%d" % (queue, queue))
+
+            self.dut.send_expect("set verbose 8", "testpmd> ")
+            self.dut.send_expect("set fwd rxonly", "testpmd> ")
+
+            self.dut.send_expect("port stop all", "testpmd> ")
+            self.dut.send_expect("vlan set extend on 0", "testpmd> ")
+            self.dut.send_expect(
+                "flow create 0 ingress pattern eth / end actions rss types l2-payload end queues end func toeplitz / end", "testpmd> ")
+            self.dut.send_expect("port start all", "testpmd> ")
+            res = self.pmdout.wait_link_status_up("all")
+            self.verify(res is True, "link is down")
+
+            self.send_packet(self.tester_itf, "l2_payload")
+
+            # set flow rss type s-vlan c-vlan set by testpmd on dut
+            self.dut.send_expect("flow create 0 ingress pattern eth / end actions rss types s-vlan c-vlan end key_len 0 queues end / end", "testpmd> ")
+            self.send_packet(self.tester_itf, "l2_payload")
+
+            self.send_packet(self.tester_itf, "l2_payload", enable="ovlan")
+
+            self.send_packet(self.tester_itf, "l2_payload", enable="ivlan")
+
+            self.dut.send_expect("quit", "# ", 30)
+
+        self.result_table_print()
+        result_rows = self.result_table_getrows()
+        self.verify(len(result_rows) > 1, "There is no data in the table, testcase failed!")
+
+        # check the results
+        if result_rows[1][1] == result_rows[2][1]:
+            flag = 0
+            self.verify(flag, "The packet index %d and %d hash values are same, rss_granularity_config failed!" %(result_rows[1][0],result_rows[2][0]))
+
+        elif result_rows[1][1] == result_rows[3][1]:
+            flag = 0
+            self.verify(flag, "The packet index %d and %d hash values are same, rss_granularity_config failed!" %(result_rows[1][0],result_rows[3][0]))
+
+        elif result_rows[1][1] == result_rows[4][1]:
+            flag = 0
+            self.verify(flag, "The packet index %d and %d hash values are same, rss_granularity_config failed!" %(result_rows[1][0],result_rows[4][0]))
+
+        elif result_rows[2][1] == result_rows[3][1]:
+            flag = 0
+            self.verify(flag, "The packet index %d and %d hash values are same, rss_granularity_config failed!" %(result_rows[2][0],result_rows[3][0]))
+
+        elif result_rows[2][1] == result_rows[4][1]:
+            flag = 0
+            self.verify(flag, "The packet index %d and %d hash values are same, rss_granularity_config failed!" %(result_rows[2][0],result_rows[4][0]))
+
+        elif result_rows[3][1] == result_rows[4][1]:
+            flag = 0
+            self.verify(flag, "The packet index %d and %d hash values are same, rss_granularity_config failed!" %(result_rows[3][0],result_rows[4][0]))
+
     def tear_down(self):
         """
         Run after each test case.
-- 
2.17.1


             reply	other threads:[~2021-07-30  5:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-30 14:19 Yan Xia [this message]
2021-07-30  8:28 ` Peng, Yuan
2021-08-10  6:58 ` Tu, Lijuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210730141903.26737-1-yanx.xia@intel.com \
    --to=yanx.xia@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).