* [dts] [PATCH V2] test_plans/cvl_dcf_acl_filter_test_plan.rst: modified max entries cases in testplan
@ 2021-08-05 23:49 Peng Yuan
2021-08-10 5:48 ` Tu, Lijuan
2021-09-14 9:47 ` Tu, Lijuan
0 siblings, 2 replies; 3+ messages in thread
From: Peng Yuan @ 2021-08-05 23:49 UTC (permalink / raw)
To: dts; +Cc: Peng Yuan
Max entry is changed from 512 to 256, so modified the related cases.
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/test_plans/cvl_dcf_acl_filter_test_plan.rst b/test_plans/cvl_dcf_acl_filter_test_plan.rst
index cdccb690..378514dd 100644
--- a/test_plans/cvl_dcf_acl_filter_test_plan.rst
+++ b/test_plans/cvl_dcf_acl_filter_test_plan.rst
@@ -508,11 +508,11 @@ so there is some difference to UDP/TCP case.
Test Case 5: max entry number
=============================
-Note: now the default entry number is 512.
+Note: now the default entry number is 256.
if create a IPv4 rule, will generate 4 entries:
ipv4, ipv4-udp, ipv4-tcp, ipv4-sctp
-So we can create 128 IPv4 rules at most.
-while we can create 512 ipv4-udp/ipv4-tcp/ipv4-sctp rules at most.
+So we can create 64 IPv4 rules at most.
+while we can create 256 ipv4-udp/ipv4-tcp/ipv4-sctp rules at most.
1. launch DPDK on VF0, request DCF mode::
@@ -526,55 +526,67 @@ while we can create 512 ipv4-udp/ipv4-tcp/ipv4-sctp rules at most.
flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.255 / udp / end actions drop / end
-3. create 512 ipv4-udp ACL rules::
+3. create 256 ipv4-udp ACL rules::
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.0 src mask 255.255.255.254 / udp / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.254 / udp / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.2 src mask 255.255.255.254 / udp / end actions drop / end
- ......
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.255 src mask 255.255.255.254 / udp / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.0 src mask 255.255.255.254 / udp / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.1 src mask 255.255.255.254 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.0 src mask 255.254.255.255 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.254.255.255 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.2 src mask 255.254.255.255 / udp / end actions drop / end
......
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.255 src mask 255.255.255.254 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.255 src mask 255.254.255.255 / udp / end actions drop / end
all the rules can be created successfully as ACL rules.
-4. list the rules, there are rule 0-512 listed.
+4. list the rules, there are rule 0-256 listed.
5. send packet1::
- sendp([Ether(dst="00:01:23:45:67:89")/IP(src="192.168.0.0", dst="192.168.100.2")/UDP(sport=8010,dport=8017)/Raw(load='X'*30)], iface="enp134s0f1")
+ sendp([Ether(dst="00:01:23:45:67:89")/IP(src="192.168.0.255", dst="192.168.100.2")/UDP(sport=8010,dport=8017)/Raw(load='X'*30)], iface="enp134s0f1")
- check the packet dropped.
+ check the packet dropped. stop the forward::
+
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 1 RX-total: 1
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
6. create one more rule::
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.2.1 src mask 255.255.255.254 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.0 src mask 255.254.255.255 / udp / end actions drop / end
- check the rule can't be created as an ACL rule successfully.
+ the rule is created as a switch rule.
7. send packet2::
- sendp([Ether(dst="00:01:23:45:67:89")/IP(src="192.168.2.1", dst="192.168.100.2")/UDP(sport=8010,dport=8017)/Raw(load='X'*30)], iface="enp134s0f1")
+ sendp([Ether(dst="00:01:23:45:67:89")/IP(src="192.168.1.0", dst="192.168.100.2")/UDP(sport=8010,dport=8017)/Raw(load='X'*30)], iface="enp134s0f1")
- check the packet can be received by VF1.
+ check the packet can't be received by VF1. stop the forward::
+
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 0 RX-total: 0
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
-8. delete the rule 512::
-
- flow destroy 0 rule 512
+8. delete the rule 256 and 257::
+
+ flow destroy 0 rule 256
+ flow destroy 0 rule 257
list the rules::
flow list 0
- there are rule 0-511 listed.
+ there are rule 0-255 listed.
9. create the rule in the step6 again,
- check the rule can be created successfully.
- list the rules, there are rule 0-512 listed.
+ check the rule can be created as acl rule successfully.
+ list the rules, there are rule 0-256 listed.
+
+10.send packet2 again, check the packet dropped. stop the forward::
-10. send packet2 again, check the packet dropped.
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 1 RX-total: 1
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
Test Case 6: max entry number ipv4-other
========================================
@@ -590,51 +602,68 @@ Test Case 6: max entry number ipv4-other
flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.255 / end actions drop / end
-3. create 128 ipv4-other ACL rules::
-
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.1 src mask 255.255.255.254 / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.2 src mask 255.255.255.254 / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.3 src mask 255.255.255.254 / end actions drop / end
- ......
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.128 src mask 255.255.255.254 / end actions drop / end
+3. create 64 ipv4-other ACL rules::
+
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.1 src mask 255.255.0.255 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.2 src mask 255.255.0.255 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.3 src mask 255.255.0.255 / end actions drop / end
+ ......
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.1.64 src mask 255.255.0.255 / end actions drop / end
all the rules can be created successfully as ACL rules.
-4. list the rules, there are rule 0-128 listed.
+4. list the rules, there are rule 0-64 listed.
5. send packet1::
- sendp([Ether(dst="00:01:23:45:67:89")/IP(src="192.168.1.1", dst="192.168.0.2")/Raw(load='X'*30)], iface="enp134s0f1")
+ sendp([Ether(dst="00:01:23:45:67:89")/IP(src="192.168.1.64", dst="192.168.0.2")/Raw(load='X'*30)], iface="enp134s0f1")
- check the packet dropped.
+ check the packet dropped. stop the forward::
+
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 1 RX-total: 1
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
6. create one more rule::
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.2 src mask 255.255.255.254 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.2 src mask 255.255.0.255 / udp / end actions drop / end
check the rule can't be created as an ACL rule successfully.
+ it's created as a switch rule.
7. send packet2::
sendp([Ether(dst="00:01:23:45:67:89")/IP(src="192.168.0.2", dst="192.168.1.2")/Raw(load='X'*30)], iface="enp134s0f1")
- check the packet can be received by VF1.
-
-8. delete the rule 128::
+ check the packet can't be received by vf1. stop forward::
+
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 0 RX-total: 0
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
+
+8. delete the rule 64 and 65::
- flow destroy 0 rule 128
+ flow destroy 0 rule 64
+ flow destroy 0 rule 65
list the rules::
flow list 0
- there are rule 0-127 listed.
+ there are rule 0-63 listed.
9. create the rule in the step6 again,
- check the rule can be created successfully.
- list the rules, there are rule 0-128 listed.
+ check the rule can be created as an ACL rule successfully.
+ list the rules, there are rule 0-64 listed.
-10. send packet2 again, check the packet dropped.
+10.send packet2 again, check the packet dropped. stop the forward::
+
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 1 RX-total: 1
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
Test Case 7: max entry number combined patterns
===============================================
@@ -646,27 +675,27 @@ Test Case 7: max entry number combined patterns
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -w 86:01.1 --file-prefix=vf1 -- -i
-2. create 64 ipv4-other ACL rules::
+2. create 32 ipv4-other ACL rules::
- flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.0 dst mask 255.255.255.0 / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.0 dst mask 255.255.0.255 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.0.255 / end actions drop / end
......
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.62 src mask 255.255.255.0 / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.63 src mask 255.255.255.0 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.30 src mask 255.255.0.255 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.31 src mask 255.255.0.255 / end actions drop / end
all the rules can be created successfully as ACL rules.
-3. create 256 ipv4-udp ACL rules::
+3. create 128 ipv4-udp ACL rules::
- flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.0 dst mask 255.255.255.254 / udp / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.254 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.0 dst mask 255.255.0.255 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.0.255 / udp / end actions drop / end
......
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.254 src mask 255.255.255.254 / udp / end actions drop / end
- flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.255 src mask 255.255.255.254 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.126 src mask 255.255.0.255 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.127 src mask 255.255.0.255 / udp / end actions drop / end
all the rules can be created successfully as ACL rules.
-4. list the rules, there are rule 0-319 listed.
+4. list the rules, there are rule 0-159 listed.
5. create one more ACl rule failed, it is created as a switch rule::
@@ -678,7 +707,12 @@ Test Case 7: max entry number combined patterns
sendp([Ether(dst="00:01:23:45:67:89")/IP(src="192.168.2.255", dst="192.168.0.2")/UDP(sport=8010,dport=8017)/Raw(load='X'*30)], iface="enp134s0f1")
- check the packet dropped.
+ check the packet dropped. stop the forward::
+
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 1 RX-total: 1
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
8. delete all the rules, check the packet is received by vf1.
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V2] test_plans/cvl_dcf_acl_filter_test_plan.rst: modified max entries cases in testplan
2021-08-05 23:49 [dts] [PATCH V2] test_plans/cvl_dcf_acl_filter_test_plan.rst: modified max entries cases in testplan Peng Yuan
@ 2021-08-10 5:48 ` Tu, Lijuan
2021-09-14 9:47 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2021-08-10 5:48 UTC (permalink / raw)
To: Peng, Yuan, dts; +Cc: Peng, Yuan
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Peng Yuan
> Sent: 2021年8月6日 7:50
> To: dts@dpdk.org
> Cc: Peng, Yuan <yuan.peng@intel.com>
> Subject: [dts] [PATCH V2] test_plans/cvl_dcf_acl_filter_test_plan.rst: modified
> max entries cases in testplan
>
> Max entry is changed from 512 to 256, so modified the related cases.
>
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
Test plans and test suites with coupled changes should be put in the same series.
So could you please re-submit your patches in the same series:
http://patchwork.dpdk.org/project/dts/patch/20210805234931.70531-1-yuan.peng@intel.com/
http://patchwork.dpdk.org/project/dts/patch/20210730032644.29349-1-yuan.peng@intel.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V2] test_plans/cvl_dcf_acl_filter_test_plan.rst: modified max entries cases in testplan
2021-08-05 23:49 [dts] [PATCH V2] test_plans/cvl_dcf_acl_filter_test_plan.rst: modified max entries cases in testplan Peng Yuan
2021-08-10 5:48 ` Tu, Lijuan
@ 2021-09-14 9:47 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2021-09-14 9:47 UTC (permalink / raw)
To: Peng, Yuan, dts; +Cc: Peng, Yuan
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Peng Yuan
> Sent: 2021年8月6日 7:50
> To: dts@dpdk.org
> Cc: Peng, Yuan <yuan.peng@intel.com>
> Subject: [dts] [PATCH V2] test_plans/cvl_dcf_acl_filter_test_plan.rst: modified
> max entries cases in testplan
>
> Max entry is changed from 512 to 256, so modified the related cases.
>
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
Applied
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-09-14 9:48 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-05 23:49 [dts] [PATCH V2] test_plans/cvl_dcf_acl_filter_test_plan.rst: modified max entries cases in testplan Peng Yuan
2021-08-10 5:48 ` Tu, Lijuan
2021-09-14 9:47 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).