From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts] [PATCH V1 1/2] test_plans/perf_virtio_user_pvp_test_plan: delete test plan
Date: Sun, 26 Sep 2021 15:23:04 +0800 [thread overview]
Message-ID: <20210926072304.3413495-1-weix.ling@intel.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 8596 bytes --]
Delete test plan and test suite because this testplan and
testsuite is include by pvp_multi_paths_performance.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
test_plans/perf_virtio_user_pvp_test_plan.rst | 191 ------------------
1 file changed, 191 deletions(-)
delete mode 100644 test_plans/perf_virtio_user_pvp_test_plan.rst
diff --git a/test_plans/perf_virtio_user_pvp_test_plan.rst b/test_plans/perf_virtio_user_pvp_test_plan.rst
deleted file mode 100644
index 8021c9db..00000000
--- a/test_plans/perf_virtio_user_pvp_test_plan.rst
+++ /dev/null
@@ -1,191 +0,0 @@
-.. Copyright (c) <2019>, Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-======================================
-vhost/virtio pvp performance test plan
-======================================
-
-Benchmark PVP performance with split ring mergeable path and packed ring mergeable path.
-For basic pvp test，give 1 core for vhost and virtio respectively.
-For virtio single core performance test，give 2 cores for vhost and 1 core for virtio,
-set io fwd at vhost side to lower the vhost workload.
-For vhost single core performance test，give 2 cores for virtio and 1 core for vhost,
-set io fwd at virtio side to lower the virtio workload.
-
-Test flow
-=========
-
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
-Test Case 1: pvp test with packed ring mergeable path
-=====================================================
-
-1. Bind one port to igb_uio, then launch vhost by below command::
-
- rm -rf vhost-net*
- ./testpmd -n 4 -l 2-3 \
- --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
- -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-2. Launch virtio-user by below command::
-
- ./testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
- >start
-
-3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
-
- testpmd>show port stats all
-
-Test Case 2: virtio single core performance test with packed ring mergeable path
-=================================================================================
-
-1. Bind one port to igb_uio, then launch vhost by below command::
-
- rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 \
- --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
- testpmd>set fwd io
- testpmd>start
-
-2. Launch virtio-user by below command::
-
- ./testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
- >start
-
-3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
-
- testpmd>show port stats all
-
-Test Case 3: vhost single core performance test with packed ring mergeable path
-===============================================================================
-
-1. Bind one port to igb_uio, then launch vhost by below command::
-
- rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-2. Launch virtio-user by below command::
-
- ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
- --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
- >set fwd io
- >start
-
-3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
-
- testpmd>show port stats all
-
-Test Case 4: pvp test with split ring mergeable path
-====================================================
-
-1. Bind one port to igb_uio, then launch vhost by below command::
-
- rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 \
- --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
- -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-2. Launch virtio-user by below command::
-
- ./testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
- >start
-
-3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
-
- testpmd>show port stats all
-
-Test Case 5: virtio single core performance test with split ring mergeable path
-===============================================================================
-
-1. Bind one port to igb_uio, then launch vhost by below command::
-
- rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 \
- --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
- testpmd>set fwd io
- testpmd>start
-
-2. Launch virtio-user by below command::
-
- ./testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
- >start
-
-3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
-
- testpmd>show port stats all
-
-Test Case 6: vhost single core performance test with split ring mergeable path
-==============================================================================
-
-1. Bind one port to igb_uio, then launch vhost by below command::
-
- rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-2. Launch virtio-user by below command::
-
- ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
- --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
- >set fwd io
- >start
-
-3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
-
- testpmd>show port stats all
\ No newline at end of file
--
2.25.1
reply other threads:[~2021-09-26 7:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210926072304.3413495-1-weix.ling@intel.com \
--to=weix.ling@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).