From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 1522AA0032; Tue, 28 Sep 2021 12:04:32 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 0B8B6410DC; Tue, 28 Sep 2021 12:04:32 +0200 (CEST) Received: from mga11.intel.com (mga11.intel.com [192.55.52.93]) by mails.dpdk.org (Postfix) with ESMTP id 000E440DF6 for ; Tue, 28 Sep 2021 12:04:29 +0200 (CEST) X-IronPort-AV: E=McAfee;i="6200,9189,10120"; a="221459613" X-IronPort-AV: E=Sophos;i="5.85,329,1624345200"; d="scan'208";a="221459613" Received: from orsmga007.jf.intel.com ([10.7.209.58]) by fmsmga102.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 28 Sep 2021 03:04:29 -0700 X-IronPort-AV: E=Sophos;i="5.85,329,1624345200"; d="scan'208";a="476235154" Received: from unknown (HELO localhost.localdomain) ([10.240.183.77]) by orsmga007-auth.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 28 Sep 2021 03:04:28 -0700 From: Yan Xia To: dts@dpdk.org Cc: Yan Xia Date: Tue, 28 Sep 2021 18:05:30 +0000 Message-Id: <20210928180533.143020-2-yanx.xia@intel.com> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20210928180533.143020-1-yanx.xia@intel.com> References: <20210928180533.143020-1-yanx.xia@intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Subject: [dts] [PATCH V1 3/5] test_plans/generic_flow_api_test_plan: move two cases from generic_filter to generic_flow_api X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org Sender: "dts" move two cases from generic_filter to generic_flow_api Signed-off-by: Yan Xia --- test_plans/generic_flow_api_test_plan.rst | 112 ++++++++++++++++++++++ 1 file changed, 112 insertions(+) diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst index d1fa33bd..760f8e82 100644 --- a/test_plans/generic_flow_api_test_plan.rst +++ b/test_plans/generic_flow_api_test_plan.rst @@ -2042,3 +2042,115 @@ Test case: create different rule after destroy pkt2 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20) verify match pkt2 to queue 2, verify mismatch pkt1 to queue 0. + +Test Case: 10GB Multiple filters +====================================== + +1. config testpmd on DUT + + 1. set up testpmd with Fortville NICs:: + + ./testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i --disable-rss --rxq=16 --txq=16 + + 2. verbose configuration:: + + testpmd> set verbose 1 + + 3. PMD fwd only receive the packets:: + + testpmd> set fwd rxonly + + 4. start packet receive:: + + testpmd> start + + 5. create rule,Enable ethertype filter, SYN filter and 5-tuple Filter on the port 0 at same + time. Assigning different filters to different queues on port 0:: + + testpmd> flow validate 0 ingress pattern eth / ipv4 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index 1 / end + testpmd> flow validate 0 ingress pattern eth type is 0x0806 / end actions queue index 2 / end + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is 2.2.2.5 src is 2.2.2.4 proto is 17 / udp dst is 1 src is 1 / end actions queue index 3 / end + testpmd> flow create 0 ingress pattern eth / ipv4 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index 1 / end + testpmd> flow create 0 ingress pattern eth type is 0x0806 / end actions queue index 2 / end + testpmd> flow create 0 ingress pattern eth / ipv4 dst is 2.2.2.5 src is 2.2.2.4 proto is 17 / udp dst is 1 src is 1 / end actions queue index 3 / end + +2. Configure the traffic generator to send different packets. Such as,SYN packets, ARP packets, IP packets and +packets with(`dst_ip` = 2.2.2.5 `src_ip` = 2.2.2.4 `dst_port` = 1 `src_port` = 1 `protocol` = udp):: + + sendp([Ether(dst="90:e2:ba:36:99:34")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(dport=80,flags="S")/Raw("x" * 20)],iface="ens224f0",count=1,inter=0,verbose=False) + sendp([Ether(dst="ff:ff:ff:ff:ff:ff")/ARP(pdst="192.168.1.1")/Raw("x" * 20)],iface="ens224f0",count=1,inter=0,verbose=False) + sendp([Ether(dst="90:e2:ba:36:99:34")/Dot1Q(prio=3)/IP(src="2.2.2.4",dst="2.2.2.5")/UDP(sport=1,dport=1)],iface="ens224f0",count=1,inter=0,verbose=False) + +3. Verify that all packets are received (RX-packets incremented)on the assigned +queue, remove 5-tuple filter:: + + testpmd> stop + testpmd> start + testpmd> flow destroy 0 rule 2 +4. Send different packets such as,SYN packets, ARP packets, packets with +(`dst_ip` = 2.2.2.5 `src_ip` = 2.2.2.4 `dst_port` = 1 `src_port` = 1 +`protocol` = udp):: + + testpmd> stop + +5. Verify that different packets are received (RX-packets incremented)on the +assigned queue export 5-tuple filter, remove ethertype filter:: + + testpmd> start + testpmd> flow destroy 0 rule 1 + +Send different packets such as,SYN packets, ARP packets, packets with +(`dst_ip` = 2.2.2.5 `src_ip` = 2.2.2.4 `dst_port` = 1 `src_port` = 1 +`protocol` = udp):: + + testpmd>stop + +Verify that only SYN packets are received (RX-packets incremented)on the +assigned queue set off SYN filter,remove syn filter:: + + testpmd>start + testpmd>flow destroy 0 rule 0 + +Configure the traffic generator to send SYN packets:: + + testpmd>stop + +Verify that the packets are not received (RX-packets do not increased)on the +queue 1. + +Test Case: jumbo framesize filter +=================================== + +This case is designed for NIC (niantic,I350, 82576 and 82580). Since +``Testpmd`` could transmits packets with jumbo frame size , it also could +transmit above packets on assigned queue. Launch the app ``testpmd`` with the +following arguments:: + + testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i --disable-rss --rxq=4 --txq=4 --portmask=0x3 --nb-cores=4 --nb-ports=1 --mbcache=200 --mbuf-size=2048 --max-pkt-len=9600 + testpmd> set fwd rxonly + testpmd> set verbose 1 + testpmd> start + +Enable the syn filters with large size:: + + testpmd> flow validate 0 ingress pattern eth / ipv4 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index 2 / end + testpmd> flow create 0 ingress pattern eth / ipv4 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index 2 / end + +Configure the traffic generator to send syn packets:: + + sendp([Ether(dst="90:e2:ba:36:99:34")/IP(src="2.2.2.5",dst="2.2.2.4")/TCP(dport=80,flags="S")/Raw(load="P"*8962)],iface="ens224f0",count=1,inter=0,verbose=False) + testpmd> stop + +Then Verify that the packet are received on the queue 2. Configure the traffic generator to send arp packets:: + + testpmd> start + sendp([Ether(dst="ff:ff:ff:ff:ff:ff")/ARP(pdst="192.168.1.1")],iface="ens224f0",count=1,inter=0,verbose=False) + +Then Verify that the packet are not received on the queue 2. Remove the filter:: + + testpmd> flow destroy 0 rule 0 + +Configure the traffic generator to send syn packets. Then Verify that +the packet are not received on the queue 2:: + + testpmd> stop -- 2.32.0