* [dts] [PATCH V1 0/1] tests/cvl_dcf_qos: upload script
@ 2021-10-15 7:08 Yufen Mo
2021-10-15 7:08 ` [dts] [PATCH V1 1/1] " Yufen Mo
0 siblings, 1 reply; 2+ messages in thread
From: Yufen Mo @ 2021-10-15 7:08 UTC (permalink / raw)
To: dts, yuan.peng; +Cc: Yufen Mo
v1:
- CVL configure QoS for vf/vsi in DCF.
Yufen Mo (1):
tests/cvl_dcf_qos: upload script
tests/TestSuite_cvl_dcf_qos.py | 2695 ++++++++++++++++++++++++++++++++
1 file changed, 2695 insertions(+)
create mode 100644 tests/TestSuite_cvl_dcf_qos.py
--
2.21.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* [dts] [PATCH V1 1/1] tests/cvl_dcf_qos: upload script
2021-10-15 7:08 [dts] [PATCH V1 0/1] tests/cvl_dcf_qos: upload script Yufen Mo
@ 2021-10-15 7:08 ` Yufen Mo
0 siblings, 0 replies; 2+ messages in thread
From: Yufen Mo @ 2021-10-15 7:08 UTC (permalink / raw)
To: dts, yuan.peng; +Cc: Yufen Mo
CVL configure QoS for vf/vsi in DCF.
Signed-off-by: Yufen Mo <yufengx.mo@intel.com>
---
tests/TestSuite_cvl_dcf_qos.py | 2695 ++++++++++++++++++++++++++++++++
1 file changed, 2695 insertions(+)
create mode 100644 tests/TestSuite_cvl_dcf_qos.py
diff --git a/tests/TestSuite_cvl_dcf_qos.py b/tests/TestSuite_cvl_dcf_qos.py
new file mode 100644
index 00000000..8efcc1d4
--- /dev/null
+++ b/tests/TestSuite_cvl_dcf_qos.py
@@ -0,0 +1,2695 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2021 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+"""
+DPDK Test suite cvl_dcf_qos
+CVL configure QoS for vf/vsi in DCF
+Support ETS-based QoS configuration, including Arbiters configuration (strict priority, WFQ)
+and BW Allocation and limitation.
+"""
+import os
+import re
+import time
+import traceback
+import operator
+from copy import deepcopy
+from pprint import pformat
+
+
+from test_case import TestCase
+from packet import Packet
+from pktgen import TRANSMIT_CONT
+from pmd_output import PmdOutput
+from settings import NICS, get_nic_name, HEADER_SIZE
+from exception import VerifyFailure
+
+
+class TestCvlDcfQos(TestCase):
+
+ def d_con(self, cmd):
+ _cmd = [cmd, '# ', 15] if isinstance(cmd, str) else cmd
+ return self.dut.send_expect(*_cmd)
+
+ def d_a_con(self, cmds):
+ prompt = "# "
+ if isinstance(cmds, str):
+ _cmd = [cmds, prompt, 20]
+ return self.dut.alt_session.send_expect(*_cmd)
+ else:
+ return [self.dut.alt_session.send_expect(_cmd, prompt, 20) for _cmd in cmds]
+
+ def pmd_con(self, cmds):
+ prompt = "testpmd> "
+ if isinstance(cmds, str):
+ _cmd = [cmds, prompt, 20]
+ return self.d_con(_cmd)
+ else:
+ return [self.d_con([_cmd, prompt, 10]) for _cmd in cmds]
+
+ def get_pkt_len(self, frame_size):
+ HEADER_SIZE['vlan'] = 4
+ headers_size = sum([HEADER_SIZE[x] for x in ['eth', 'ip', 'vlan', 'udp']])
+ pktlen = frame_size - headers_size
+ return pktlen
+
+ def config_stream(self, fields, frame_size):
+ vlan_id, pri, mac = fields + [None] * (3 - len(fields))
+ dmac = mac or "00:11:22:33:44:55"
+ pkt_name = 'VLAN_UDP'
+ pkt_config = {
+ 'type': pkt_name.upper(),
+ 'pkt_layers': {
+ 'ether': {'dst': dmac},
+ 'vlan': {'vlan': vlan_id, 'prio': pri},
+ 'raw': {'payload': ['58'] * self.get_pkt_len(frame_size)}}}
+ values = pkt_config
+ pkt_type = values.get('type')
+ pkt_layers = values.get('pkt_layers')
+ pkt = Packet(pkt_type=pkt_type)
+ for layer in list(pkt_layers.keys()):
+ pkt.config_layer(layer, pkt_layers[layer])
+ return pkt.pktgen.pkt
+
+ def add_stream_to_pktgen(self, txport, rxport, send_pkts, option):
+ stream_ids = []
+ for pkt in send_pkts:
+ _option = deepcopy(option)
+ _option['pcap'] = pkt
+ stream_id = self.tester.pktgen.add_stream(txport, rxport, send_pkts[0])
+ self.tester.pktgen.config_stream(stream_id, _option)
+ stream_ids.append(stream_id)
+ return stream_ids
+
+ def traffic(self, option):
+ txport = option.get('tx_intf')
+ rxport = option.get('rx_intf')
+ rate_percent = option.get('rate_percent', float(100))
+ duration = option.get('duration', 20)
+ send_pkts = option.get('stream') or []
+ self.tester.pktgen.clear_streams()
+ s_option = {
+ 'stream_config': {
+ 'txmode': {},
+ 'transmit_mode': TRANSMIT_CONT,
+ 'rate': rate_percent, }
+ }
+ stream_ids = self.add_stream_to_pktgen(
+ txport, rxport, send_pkts, s_option)
+ traffic_opt = {
+ 'method': 'throughput',
+ 'duration': duration,
+ 'interval': duration - 5,
+ 'callback': self.testpmd_query_stats,
+ }
+ result = self.tester.pktgen.measure(stream_ids, traffic_opt)
+ return result
+
+ def check_traffic(self, stream_configs, traffic_tasks, frame_size=68):
+ tester_rx_port_id = tester_tx_port_id = self.tester.get_local_port(self.dut_ports[0])
+ duration = 20
+ results = []
+ _traffic_tasks = traffic_tasks[:]
+ for index, traffic_task in enumerate(_traffic_tasks):
+ stream_ids, rate_percent, _ = traffic_task
+ streams = []
+ for idx in stream_ids:
+ streams.append(self.config_stream(stream_configs[idx], frame_size))
+ ports_topo = {
+ 'tx_intf': tester_tx_port_id,
+ 'rx_intf': tester_rx_port_id,
+ 'stream': streams,
+ 'duration': duration,
+ 'rate_percent': rate_percent,
+ }
+ result = self.traffic(ports_topo)
+ queue_stats = self.get_queue_packets_stats()
+ results.append([result, self.pmd_stat, queue_stats])
+ time.sleep(5)
+
+ for traffic_task, _result in zip(_traffic_tasks, results):
+ stream_ids, _, expected_t = traffic_task
+ result, pmd_stat, queue_stats = _result
+
+ if not isinstance(expected_t, list):
+ expected_t = [expected_t]
+ for _expected_t in expected_t:
+ _expected_t = list(_expected_t) + [None] * (3 - len(_expected_t))
+ status = self.is_expected_throughput(_expected_t, pmd_stat)
+ msg = (
+ f'{pformat(traffic_task)}'
+ " not get expected throughput value, real is: "
+ f'{pformat(pmd_stat)}')
+ self.verify(status, msg)
+
+ def is_expected_throughput(self, expected, pmd_stat):
+ _expected, unit, port = expected
+ port = port or 1
+ real_stat = pmd_stat.get(f'port {port}', {})
+ if unit == "rGbps":
+ key = 'rx_bps'
+ else:
+ key = 'tx_bps'
+ real_bps = real_stat.get(key) or 0
+ if real_bps == 0 and _expected == 0:
+ return True
+ if not _expected:
+ return False
+ bias = 10
+ if unit == "MBps":
+ return (100 * (real_bps / 8 / 1e6 - _expected) / _expected) > -bias
+ elif unit == "-MBps":
+ return real_bps / 8 / 1e6 < _expected
+ elif unit in ["Gbps", "rGbps"]:
+ if _expected == 100:
+ bias = 20
+ return (100 * (real_bps / 1e9 - _expected) / _expected) > -bias
+
+ def get_custom_nic_port(self, nic_name):
+ for dut_port_id in self.dut.get_ports():
+ port_type = self.dut.ports_info[dut_port_id]['type']
+ intf = self.dut.ports_info[dut_port_id]['intf']
+ pci = self.dut.ports_info[dut_port_id]['pci']
+ _nic_name = get_nic_name(port_type)
+ if _nic_name in nic_name:
+ return dut_port_id, intf, pci
+ return None, None, None
+
+ def pf_preset(self):
+ self.nic_100g, self.nic100G_intf, self.nic100g_pci = self.get_custom_nic_port([
+ 'columbiaville_100g', ])
+ self.nic_25g, self.nic25G_intf, self.nic25g_pci = self.get_custom_nic_port([
+ 'columbiaville_25gx2', ])
+ msg = "not enough nics for testing"
+ self.verify(self.nic_100g is not None and self.nic_25g is not None, msg)
+ port_obj = self.dut.ports_info[self.nic_100g]['port']
+ port_obj.bind_driver(port_obj.default_driver)
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"lldptool -T -i {self.nic25G_intf} -V ETS-CFG willing=no",
+ f"lldptool -T -i {self.nic100G_intf} -V ETS-CFG willing=no", ]
+ self.d_a_con(cmds)
+ port_obj = self.dut.ports_info[self.nic_25g]['port']
+ port_obj.bind_driver(port_obj.default_driver)
+
+ def pf_restore(self):
+ port_obj = self.dut.ports_info[self.nic_100g]['port']
+ port_obj.bind_driver(self.drivername)
+ port_obj = self.dut.ports_info[self.nic_25g]['port']
+ port_obj.bind_driver(self.drivername)
+
+ def vf_init(self):
+ self.cur_vf_config = {}
+ self.vf_ports_info = {}
+ self.valports = []
+
+ def vf_create(self, valports, vf_num=2):
+ vf_config = {
+ "valports": valports or [self.nic_100g],
+ "vf_num": vf_num,
+ }
+ if operator.eq(vf_config, self.cur_vf_config) and self.vf_ports_info:
+ return
+ elif self.vf_ports_info:
+ self.vf_destroy()
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"rmmod {self.drivername}",
+ f"modprobe {self.drivername}", ]
+ self.d_a_con(cmds)
+ for index, port_id in enumerate(valports):
+ port_obj = self.dut.ports_info[port_id]['port']
+ pf_driver = port_obj.default_driver
+ self.dut.generate_sriov_vfs_by_port(port_id, vf_num, driver=pf_driver)
+ pf_pci = port_obj.pci
+ sriov_vfs_port = self.dut.ports_info[port_id].get('vfs_port')
+ if not sriov_vfs_port:
+ msg = f"failed to create vf on dut port {pf_pci}"
+ self.logger.error(msg)
+ continue
+ for port in sriov_vfs_port:
+ port.bind_driver(driver=self.drivername)
+ self.vf_ports_info[port_id] = {
+ 'pf_pci': pf_pci,
+ 'vfs_pci': port_obj.get_sriov_vfs_pci(), }
+ time.sleep(1)
+ pf_intf = port_obj.get_interface_name()
+ cmd = ';'.join([
+ f"ifconfig {pf_intf} up",
+ f"ethtool {pf_intf} | grep Speed", ])
+ self.d_a_con(cmd)
+ set_mac = "00:11:22:33:44:55" if index == 0 else "00:11:22:33:44:66"
+ set_mac_cmd = f"ip link set {pf_intf} vf 1 mac {set_mac}"
+ cmds = [
+ set_mac_cmd if vf_num == 2 else "echo 'set mac in next step'",
+ f"ip link set dev {pf_intf} vf 0 trust on", ]
+ self.d_a_con(cmds)
+ self.cur_vf_config = vf_config
+
+ def vf_destroy(self):
+ if not self.vf_ports_info:
+ return
+ for port_id, _ in self.vf_ports_info.items():
+ port_obj = self.dut.ports_info[port_id]['port']
+ pf_intf = port_obj.get_interface_name()
+ cmd = f"ip link set dev {pf_intf} vf 0 trust off"
+ self.d_a_con(cmd)
+ self.dut.destroy_sriov_vfs_by_port(port_id)
+ pf_driver = port_obj.default_driver
+ port_obj.bind_driver(pf_driver)
+ self.vf_ports_info = {}
+ self.cur_vf_config = {}
+ cmds = [
+ "rmmod ice",
+ "modprobe ice", ]
+ self.d_a_con(cmds)
+
+ def testpmd_query_stats(self):
+ output = self.pmd_con('show port stats all')
+ if not output:
+ return
+ port_pat = '.*NIC statistics for (port \d+) .*'
+ rx_pat = '.*Rx-pps:\s+(\d+)\s+Rx-bps:\s+(\d+).*'
+ tx_pat = '.*Tx-pps:\s+(\d+)\s+Tx-bps:\s+(\d+).*'
+ port = re.findall(port_pat, output, re.M)
+ rx = re.findall(rx_pat, output, re.M)
+ tx = re.findall(tx_pat, output, re.M)
+ if not port or not rx or not tx:
+ return
+ stat = {}
+ for port_id, (rx_pps, rx_bps), (tx_pps, tx_bps) in zip(port, rx, tx):
+ stat[port_id] = {
+ 'rx_pps': float(rx_pps),
+ 'rx_bps': float(rx_bps),
+ 'tx_pps': float(tx_pps),
+ 'tx_bps': float(tx_bps),
+ }
+ self.pmd_stat = stat
+
+ def get_queue_packets_stats(self):
+ output = self.pmd_con('stop')
+ self.pmd_con('start')
+ pat_k = r"Forward Stats for RX Port= ([0-9]+)/Queue= ([0-9]+)\s+-> TX Port= ([0-9]+)/Queue= ([0-9]+)"
+ pat_v = r"RX-packets: ([0-9]+)\s+TX-packets: ([0-9]+)\s+TX-dropped: ([0-9]+)"
+ k_result = re.findall(pat_k, output, re.M)
+ v_result = re.findall(pat_v, output, re.M)
+ if not k_result or not v_result:
+ return {}
+ stats = dict(zip(k_result, v_result))
+ return stats
+
+ def testpmd_init(self):
+ self.pmd_output = PmdOutput(self.dut)
+ self.is_pmd_on = False
+
+ def testpmd_start(self, vfs_group):
+ allow_list = []
+ for vfs in vfs_group:
+ for idx, vf in enumerate(vfs):
+ addr = f"{vf},cap=dcf" if idx == 0 else vf
+ allow_list.append(addr)
+ eal_param = " ".join(allow_list)
+ param = (
+ "{xq} "
+ "{nb-cores} "
+ "{topo}").format(**{
+ "xq": "--txq=8 --rxq=8",
+ "nb-cores": "--nb-cores=8",
+ "topo": "--port-topology=loop" if len(vfs_group) == 1 else "",
+ })
+ self.pmd_output.start_testpmd(
+ cores="1S/9C/1T",
+ param=param,
+ **{"ports": allow_list}
+ )
+ self.is_pmd_on = True
+
+ def testpmd_close(self):
+ if not self.is_pmd_on:
+ return
+ try:
+ self.pmd_con('stop')
+ self.d_con(['quit', '# ', 30])
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ self.is_pmd_on = False
+
+ def check_output(self, expected, output):
+ if isinstance(expected, str):
+ expected = [expected]
+ for _expected in expected:
+ self.verify(
+ _expected in output,
+ f"expected <{_expected}> message not display")
+
+ def strict_mode_check_peak_tb_rate_preset(self, vfs_grp, dcb_cmd=None, if_op='up'):
+ cmds = [
+ dcb_cmd or f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} {if_op}", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+
+ def verify_strict_mode_check_peak_tb_rate(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 2],
+ [0, 5],
+ [0, 3],
+ [0, 4], ]
+ traffic_tasks = [
+ [[0], 25, (2, 'MBps')],
+ [[1], 25, (2, 'MBps')],
+ [[2], 25, (4, 'MBps')],
+ [[3], 25, (4, 'MBps')],
+ [[0, 1, 2, 3], 25, (10, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "port start all",
+ "set fwd mac",
+ "start",
+ ]
+ self.pmd_con(cmds)
+ traffic_tasks = [
+ [[0], 25, (2, 'MBps')],
+ [[1], 25, (2, 'MBps')],
+ [[2], 25, (4, 'MBps')],
+ [[3], 25, (0, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+
+ def verify_ets_mode_check_peak_tb_rate(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,0,1,1,1,1 --tcbw 20,80,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"{self.dcbgetset} {self.nic25G_intf} --ieee --up2tc 0,0,0,0,1,1,1,1 --tcbw 20,80,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ifconfig {self.nic25G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+
+ def pmd_cmds(pir=None):
+ return [
+ "set portlist 0,2,1,3",
+ "show config fwd",
+ "port stop all",
+ f"add port tm node shaper profile 0 1 10000000 0 {pir or 4000000000} 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ f"add port tm node shaper profile 2 1 10000000 0 {pir or 1000000000} 0 0 0",
+ "add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 800 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 2 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 2 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 2 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 3 yes",
+ "port start all",
+ "set fwd mac",
+ "start",
+ ]
+
+ self.pmd_con(pmd_cmds())
+ stream_configs = [
+ [0, 0],
+ [0, 4], ]
+ traffic_tasks = [
+ [[0], 50, (7.3, 'Gbps', 3)],
+ [[1], 50, (7.3, 'Gbps', 3)],
+ [[0, 1], 50, (7.3, 'Gbps', 3)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.pmd_con('stop')
+ self.testpmd_close()
+ time.sleep(5)
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,0,1,1,1,1 --tcbw 20,80,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"{self.dcbgetset} {self.nic25G_intf} --ieee --up2tc 0,0,0,0,1,1,1,1 --tcbw 20,80,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ifconfig {self.nic25G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ self.pmd_con(pmd_cmds(500000000))
+ traffic_tasks = [
+ [[0], 50, (3.95, 'Gbps', 3)],
+ [[1], 50, (3.95, 'Gbps', 3)],
+ [[0, 1], 50, (7.27, 'Gbps', 3)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.pmd_con('stop')
+ self.testpmd_close()
+
+ def verify_strict_mode_check_cmit_tb_rate(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 10,90,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"{self.dcbgetset} {self.nic25G_intf} --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 10,90,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ifconfig {self.nic25G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "set portlist 0,2,1,3",
+ "show config fwd",
+ "port stop all",
+ "add port tm node shaper profile 0 1 10000000 0 4000000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm node shaper profile 2 1 10000000 0 1000000000 0 0 0",
+ "add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 800 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 2 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 2 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 2 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 3 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 0],
+ [0, 3], ]
+ traffic_tasks = [
+ [[0], 50, (7.3, 'Gbps', 3)],
+ [[1], 50, (7.3, 'Gbps', 3)],
+ [[0, 1], 50, (7.3, 'Gbps', 3)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.pmd_con('stop')
+ self.testpmd_close()
+
+ def verify_ets_mode_check_cmit_tb_rate(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,1,1,2,2,2,2 --tcbw 1,10,89,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"{self.dcbgetset} {self.nic25G_intf} --ieee --up2tc 0,0,1,1,2,2,2,2 --tcbw 1,10,89,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ifconfig {self.nic25G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "set portlist 0,2,1,3",
+ "show config fwd",
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000000 0 4000000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm node shaper profile 2 1 100000000 0 1000000000 0 0 0",
+ "add port tm node shaper profile 2 2 100000000 0 150000000 0 0 0",
+ "add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 2 0 900 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 2 1 900 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 2 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 2 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 2 4 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 5 700 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 2 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 3 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 0],
+ [0, 1],
+ [0, 2],
+ [0, 3],
+ [0, 4],
+ [0, 5],
+ [0, 6],
+ [0, 7], ]
+ traffic_tasks = [
+ [[0], 12.5, (1, 'Gbps', 3)],
+ [[1], 12.5, (1, 'Gbps', 3)],
+ [[2], 12.5, (1, 'Gbps', 3)],
+ [[3], 12.5, (1, 'Gbps', 3)],
+ [[4], 12.5, (8, 'Gbps', 3)],
+ [[5], 12.5, (8, 'Gbps', 3)],
+ [[6], 12.5, (8, 'Gbps', 3)],
+ [[7], 12.5, (8, 'Gbps', 3)],
+ [[0, 1, 2, 3, 4, 5, 6, 7], 12.5, (9.7, 'rGbps', 1)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=1024)
+ time.sleep(10)
+ traffic_tasks = [
+ [[0, 1, 2, 3, 4, 5, 6, 7], 12.5, (7.273, 'rGbps', 1)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=68)
+ self.testpmd_close()
+
+ def verify_iavf_VFs_strict_mode_check_peak_tb_rate(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ip link set dev {self.nic100G_intf} vf 0 trust on",
+ f"ip link set {self.nic100G_intf} vf 1 mac 00:11:22:33:44:55",
+ f"ip link set {self.nic100G_intf} vf 2 mac 00:11:22:33:44:66", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 6 700 0 1 2 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 7 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 8 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "add port tm nonleaf node 2 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 2 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 2 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 2 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 2 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 2 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 0, '00:11:22:33:44:55'],
+ [0, 1, '00:11:22:33:44:55'],
+ [0, 2, '00:11:22:33:44:55'],
+ [0, 3, '00:11:22:33:44:55'],
+ [0, 0, '00:11:22:33:44:66'],
+ [0, 1, '00:11:22:33:44:66'],
+ [0, 2, '00:11:22:33:44:66'],
+ [0, 3, '00:11:22:33:44:66'], ]
+ traffic_tasks = [
+ [[0], 12.5, (2, 'MBps')],
+ [[1], 12.5, (2, 'MBps')],
+ [[2], 12.5, (4, 'MBps')],
+ [[3], 12.5, (2, 'MBps')],
+ [[4], 12.5, (2, 'MBps', 2)],
+ [[5], 12.5, (2, 'MBps', 2)],
+ [[6], 12.5, (2, 'MBps', 2)],
+ [[7], 12.5, (4, 'MBps', 2)],
+ [[0, 1, 2, 3, 4, 5, 6, 7], 12.5, (16, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+
+ def verify_iavf_VFs_strict_mode_check_cmit_tb_rate(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 20,80,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"{self.dcbgetset} {self.nic25G_intf} --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 20,80,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ "sleep 5",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ifconfig {self.nic25G_intf} up",
+ "sleep 5",
+ f"ip link set dev {self.nic100G_intf} vf 0 trust on",
+ "sleep 5",
+ f"ip link set {self.nic100G_intf} vf 1 mac 00:11:22:33:44:55",
+ f"ip link set {self.nic100G_intf} vf 2 mac 00:11:22:33:44:66",
+ "sleep 5",
+ f"ip link set dev {self.nic25G_intf} vf 0 trust on",
+ "sleep 5",
+ f"ip link set {self.nic25G_intf} vf 1 mac 00:11:22:33:44:77",
+ f"ip link set {self.nic25G_intf} vf 2 mac 00:11:22:33:44:88",
+ "sleep 5",
+ ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "set portlist 0,3,1,4,2,5",
+ "show config fwd",
+ "port stop all",
+ "add port tm node shaper profile 0 1 100000000 0 4000000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 800 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no",
+ "add port tm node shaper profile 3 1 100000000 0 500000000 0 0 0",
+ "add port tm nonleaf node 3 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 3 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 3 800 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 3 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 2 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 4 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 5 800 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 3 no",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "add port tm nonleaf node 4 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 4 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 4 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 4 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 4 no",
+ "add port tm nonleaf node 2 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 2 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 2 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 2 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 2 no",
+ "add port tm nonleaf node 5 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 5 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 5 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 5 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 5 no", ]
+ self.pmd_con(cmds)
+ time.sleep(15)
+ cmds = [
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ time.sleep(15)
+ stream_configs = [
+ [0, 2, '00:11:22:33:44:55'],
+ [0, 3, '00:11:22:33:44:66'],
+ [0, 2, '00:11:22:33:44:77'],
+ [0, 3, '00:11:22:33:44:88'],
+ ]
+ traffic_tasks = [
+ [[0], 25, (3.64, 'Gbps', 4)],
+ [[1], 25, (3.64, 'Gbps', 5)],
+ [[0, 1, 2, 3, ], 25, (3.64, 'Gbps', 4)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.pmd_con('stop')
+ self.testpmd_close()
+
+ def verify_iavf_VFs_ets_mode(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"{self.dcbgetset} {self.nic25G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ifconfig {self.nic25G_intf} up", ]
+ self.d_a_con(cmds)
+ cmds = [
+ f"ip link set dev {self.nic100G_intf} vf 0 trust on",
+ f"ip link set {self.nic100G_intf} vf 1 mac 00:11:22:33:44:55",
+ f"ip link set {self.nic100G_intf} vf 2 mac 00:11:22:33:44:66",
+ f"ip link set dev {self.nic25G_intf} vf 0 trust on",
+ f"ip link set {self.nic25G_intf} vf 1 mac 00:11:22:33:44:77",
+ f"ip link set {self.nic25G_intf} vf 2 mac 00:11:22:33:44:88",
+ ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "set portlist 0,3,1,4,2,5",
+ "show config fwd",
+ "port stop all",
+ "add port tm node shaper profile 0 1 0 0 0 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 6 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 7 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 8 700 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm node shaper profile 3 1 0 0 0 0 0 0",
+ "add port tm nonleaf node 3 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 3 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 3 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 3 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 3 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 2 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 4 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 5 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 6 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 7 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 3 8 700 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 3 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "add port tm nonleaf node 2 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 2 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 2 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 2 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 2 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 2 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 2 yes",
+ "add port tm nonleaf node 4 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 4 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 4 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 4 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 4 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 4 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 5 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 4 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 4 yes",
+ "add port tm nonleaf node 5 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 5 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 5 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 5 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 5 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 5 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 5 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ time.sleep(25)
+ stream_configs = [
+ [0, 0, '00:11:22:33:44:55'],
+ [0, 1, '00:11:22:33:44:66'],
+ [0, 2, '00:11:22:33:44:55'],
+ [0, 3, '00:11:22:33:44:66'],
+ [0, 0, '00:11:22:33:44:77'],
+ [0, 1, '00:11:22:33:44:88'],
+ [0, 2, '00:11:22:33:44:77'],
+ [0, 3, '00:11:22:33:44:88'], ]
+ traffic_tasks = [
+ [[0, 1, 2, 3, 4, 5, 6, 7], 100, [(5.3, 'Gbps', 4), (10.6, 'Gbps', 5)]],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+
+ def verify_strict_mode_8_TCs(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,1,2,3,4,5,6,7 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 400000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 200000000 0 0 0",
+ "add port tm node shaper profile 0 3 1000000 0 100000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 600 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 500 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 400 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 300 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 200 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 6 600 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 7 600 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 8 500 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 9 500 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 10 400 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 11 400 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 12 300 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 13 300 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 14 200 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 15 200 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 600 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 500 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 400 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 300 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 200 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 600 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 500 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 400 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 300 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 200 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 0],
+ [0, 1],
+ [0, 2],
+ [0, 3],
+ [0, 4],
+ [0, 5],
+ [0, 6],
+ [0, 7], ]
+ traffic_tasks = [
+ [[0], 12.5, (100, 'MBps')],
+ [[1], 12.5, (100, 'MBps')],
+ [[2], 12.5, (100, 'MBps')],
+ [[3], 12.5, (100, 'MBps')],
+ [[4], 12.5, (100, 'MBps')],
+ [[5], 12.5, (200, 'MBps')],
+ [[6], 12.5, (200, 'MBps')],
+ [[7], 12.5, (400, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=68)
+ self.testpmd_close()
+ time.sleep(10)
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,1,2,3,4,5,6,7 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 1780000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 600 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 500 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 400 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 300 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 200 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 6 600 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 7 600 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 8 500 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 9 500 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 10 400 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 11 400 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 12 300 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 13 300 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 14 200 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 15 200 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 600 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 500 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 400 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 300 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 200 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 600 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 500 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 400 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 300 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 200 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ traffic_tasks = [
+ [[0], 12.5, (1000, 'MBps')],
+ [[1], 12.5, (1000, 'MBps')],
+ [[2], 12.5, (1000, 'MBps')],
+ [[3], 12.5, (1000, 'MBps')],
+ [[4], 12.5, (1000, 'MBps')],
+ [[5], 12.5, (1000, 'MBps')],
+ [[6], 12.5, (1000, 'MBps')],
+ [[7], 12.5, (1000, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=68)
+ self.pmd_con('stop')
+ time.sleep(5)
+ self.pmd_con('start')
+ time.sleep(10)
+ traffic_tasks = [
+ [[0], 12.5, (1500, 'MBps')],
+ [[1], 12.5, (1500, 'MBps')],
+ [[2], 12.5, (1500, 'MBps')],
+ [[3], 12.5, (1500, 'MBps')],
+ [[4], 12.5, (1500, 'MBps')],
+ [[5], 12.5, (1500, 'MBps')],
+ [[6], 12.5, (1500, 'MBps')],
+ [[7], 12.5, (1500, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=1024)
+ self.testpmd_close()
+
+ def verify_strict_mode_1_TC(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,0,0,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 1000000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 900 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 0],
+ [0, 1],
+ [0, 2],
+ [0, 3],
+ [0, 4],
+ [0, 5],
+ [0, 6],
+ [0, 7], ]
+ traffic_tasks = [
+ [[0, 1, 2, 3, 4, 5, 6, 7], 12.5, (8, 'Gbps')],
+ [[0], 12.5, (8, 'Gbps')], ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=1024)
+ self.testpmd_close()
+
+ def verify_ets_mode_8_TCs(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,1,2,3,4,5,6,7 --tcbw 5,10,15,10,20,1,30,9 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"{self.dcbgetset} {self.nic25G_intf} --ieee --up2tc 0,1,2,3,4,5,6,7 --tcbw 5,10,15,10,20,1,30,9 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ifconfig {self.nic25G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+
+ def pmd_cmds(opts):
+ return [
+ "set portlist 0,2,1,3",
+ "show config fwd",
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 4000000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 2000000000 0 0 0",
+ "add port tm node shaper profile 0 3 1000000 0 1000000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 600 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 500 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 400 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 300 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 200 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 6 600 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 7 600 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 8 500 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 9 500 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 0 10 400 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 11 400 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 12 300 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 13 300 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 14 200 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 15 200 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ opts[0],
+ opts[1],
+ opts[2],
+ "add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 700 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 600 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 500 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 400 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 300 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 2 200 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 2 0 900 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 1 900 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 2 800 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 3 800 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 4 700 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 5 700 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 6 600 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 7 600 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 8 500 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 9 500 0 1 2 3 0 0xffffffff 0 0",
+ "add port tm leaf node 2 10 400 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 2 11 400 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 2 12 300 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 2 13 300 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 2 14 200 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 15 200 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 2 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 600 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 500 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 400 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 300 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 200 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 600 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 500 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 400 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 300 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 200 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 700 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 600 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 500 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 400 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 300 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 3 200 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 1 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 2 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 3 600 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 4 500 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 5 400 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 6 300 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 7 200 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 3 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+
+ opts = [
+ "add port tm node shaper profile 2 1 1000000 0 400000000 0 0 0",
+ "add port tm node shaper profile 2 2 1000000 0 200000000 0 0 0",
+ "add port tm node shaper profile 2 3 1000000 0 100000000 0 0 0", ]
+ self.pmd_con(pmd_cmds(opts))
+ stream_configs = [
+ [0, 0],
+ [0, 1],
+ [0, 2],
+ [0, 3],
+ [0, 4],
+ [0, 5],
+ [0, 6],
+ [0, 7], ]
+ traffic_tasks = [
+ [[0], 12.5, (100, 'MBps', 3)],
+ [[1], 12.5, (100, 'MBps', 3)],
+ [[2], 12.5, (100, 'MBps', 3)],
+ [[3], 12.5, (100, 'MBps', 3)],
+ [[4], 12.5, (100, 'MBps', 3)],
+ [[5], 12.5, (100, 'MBps', 3)],
+ [[6], 12.5, (200, 'MBps', 3)],
+ [[7], 12.5, (400, 'MBps', 3)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=68)
+ self.testpmd_close()
+ time.sleep(5)
+ self.testpmd_start(vfs_grp)
+ opts = [
+ "add port tm node shaper profile 2 1 1000000 0 100000000 0 0 0",
+ "add port tm node shaper profile 2 2 1000000 0 250000000 0 0 0",
+ "add port tm node shaper profile 2 3 1000000 0 100000000 0 0 0", ]
+ self.pmd_con(pmd_cmds(opts))
+ traffic_tasks = [
+ [[0], 12.5, (100, 'MBps', 3)],
+ [[1], 12.5, (100, 'MBps', 3)],
+ [[2], 12.5, (100, 'MBps', 3)],
+ [[3], 12.5, (100, 'MBps', 3)],
+ [[4], 12.5, (100, 'MBps', 3)],
+ [[5], 12.5, (250, 'MBps', 3)],
+ [[6], 12.5, (250, 'MBps', 3)],
+ [[7], 12.5, (100, 'MBps', 3)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=68)
+ self.testpmd_close()
+ time.sleep(5)
+ self.testpmd_start(vfs_grp)
+ opts = [
+ "add port tm node shaper profile 2 1 0 0 0 0 0 0",
+ "add port tm node shaper profile 2 2 0 0 0 0 0 0",
+ "add port tm node shaper profile 2 3 0 0 0 0 0 0", ]
+ self.pmd_con(pmd_cmds(opts))
+ traffic_tasks = [
+ [[0], 12.5, (1000, 'MBps', 3)],
+ [[1], 12.5, (1000, 'MBps', 3)],
+ [[2], 12.5, (1000, 'MBps', 3)],
+ [[3], 12.5, (1000, 'MBps', 3)],
+ [[4], 12.5, (1000, 'MBps', 3)],
+ [[5], 12.5, (1000, 'MBps', 3)],
+ [[6], 12.5, (1000, 'MBps', 3)],
+ [[7], 12.5, (1000, 'MBps', 3)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=68)
+ self.testpmd_close()
+
+ def verify_ets_mode_1_TC(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,0,0,0,0,0 --tcbw 100,0,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"{self.dcbgetset} {self.nic25G_intf} --ieee --up2tc 0,0,0,0,0,0,0,0 --tcbw 100,0,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ifconfig {self.nic25G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "set portlist 0,2,1,3",
+ "show config fwd",
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 10000000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 900 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "add port tm node shaper profile 2 1 1000000 0 1000000000 0 0 0",
+ "add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 2 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 2 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 2 yes",
+ "add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 4 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 5 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 6 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 3 7 900 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 3 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 0],
+ [0, 1],
+ [0, 2],
+ [0, 3],
+ [0, 4],
+ [0, 5],
+ [0, 6],
+ [0, 7], ]
+ traffic_tasks = [
+ [[0], 12.5, (7.3, 'Gbps', 3)],
+ [[0, 1, 2, 3, 4, 5, 6, 7], 12.5, (7.3, 'Gbps', 3)],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=1024)
+ self.testpmd_close()
+
+ def verify_query_qos_setting(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "port start all", ]
+ self.pmd_con(cmds)
+ cmds = [
+ "show port tm cap 1", ]
+ self.pmd_con(cmds)
+ cmds = [
+ "show port tm level cap 1 0",
+ "show port tm level cap 1 1",
+ "show port tm level cap 1 2", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ 'cap.nonleaf.shaper_private_rate_min 0',
+ 'cap.nonleaf.shaper_private_rate_max 12500000000', ]
+ [self.check_output(expected, output) for output in outputs]
+ cmds = [
+ "show port tm node cap 1 900",
+ "show port tm node cap 1 800", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ ['cap.shaper_private_rate_min 1000000',
+ 'cap.shaper_private_rate_max 2000000', ],
+ ['cap.shaper_private_rate_min 1000000',
+ 'cap.shaper_private_rate_max 4000000', ]]
+ [self.check_output(_expected, output)
+ for _expected, output in zip(expected, outputs)]
+ cmds = [
+ "show port tm node type 1 0",
+ "show port tm node type 1 900",
+ "show port tm node type 1 1000", ]
+ outputs = self.pmd_con(cmds)
+ expected_types = ['leaf node', 'nonleaf node', 'nonleaf node']
+ [self.check_output(_expected, output)
+ for _expected, output in zip(expected_types, outputs)]
+ self.testpmd_close()
+
+ def verify_pf_reset(self, vfs_grp):
+ self.strict_mode_check_peak_tb_rate_preset(vfs_grp)
+ stream_configs = [
+ [0, 2], ]
+ traffic_tasks = [
+ [[0], 25, (2, 'MBps')], ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+ pci = str(int(self.nic100g_pci[5:7]) - 1)
+ cmds = [
+ f"echo 1 > /sys/devices/pci0000:{pci}/0000:{pci}:00.0/{self.nic100g_pci}/reset", ]
+ self.d_a_con(cmds)
+ self.strict_mode_check_peak_tb_rate_preset(vfs_grp)
+ stream_configs = [
+ [0, 2], ]
+ traffic_tasks = [
+ [[0], 25, (0, 'MBps')], ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+
+ def verify_vf_reset(self, vfs_grp):
+ cmds = [
+ f"ip link set {self.nic100G_intf} vf 1 mac 00:11:22:33:44:66", ]
+ self.d_a_con(cmds)
+ self.strict_mode_check_peak_tb_rate_preset(vfs_grp)
+ cmds = [
+ "port stop 1",
+ "port reset 1",
+ "port start 1",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 2, "00:11:22:33:44:66"],
+ [0, 5, "00:11:22:33:44:66"],
+ [0, 3, "00:11:22:33:44:66"],
+ [0, 4, "00:11:22:33:44:66"], ]
+ traffic_tasks = [
+ [[0], 25, (2, 'MBps')],
+ [[1], 25, (2, 'MBps')],
+ [[2], 25, (4, 'MBps')],
+ [[3], 25, (4, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+ cmds = [
+ f"ip link set {self.nic100G_intf} vf 1 mac 00:11:22:33:44:55", ]
+ self.d_a_con(cmds)
+ self.strict_mode_check_peak_tb_rate_preset(vfs_grp)
+ stream_configs = [
+ [0, 2],
+ [0, 5],
+ [0, 3],
+ [0, 4], ]
+ traffic_tasks = [
+ [[0], 25, (2, 'MBps')],
+ [[1], 25, (2, 'MBps')],
+ [[2], 25, (4, 'MBps')],
+ [[3], 25, (4, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+
+ def verify_link_status_change(self, vfs_grp):
+ cmds = [
+ f"ifconfig {self.nic100G_intf} down", ]
+ self.strict_mode_check_peak_tb_rate_preset(vfs_grp, if_op='down')
+ stream_configs = [
+ [0, 2], ]
+ traffic_tasks = [
+ [[0], 25, (2, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+ cmds = [
+ f"ifconfig {self.nic100G_intf} up", ]
+ self.strict_mode_check_peak_tb_rate_preset(vfs_grp)
+ stream_configs = [
+ [0, 2], ]
+ traffic_tasks = [
+ [[0], 25, (2, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+
+ def verify_DCB_setting_TC_change(self, vfs_grp):
+ cmd = f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,40,50,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0"
+ self.strict_mode_check_peak_tb_rate_preset(vfs_grp, dcb_cmd=cmd)
+ stream_configs = [
+ [0, 2],
+ [0, 5],
+ [0, 3],
+ [0, 4], ]
+ traffic_tasks = [
+ [[0], 25, (2, 'MBps')],
+ [[1], 25, (2, 'MBps')],
+ [[2], 25, (4, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks)
+ self.testpmd_close()
+
+ def negative_case_for_requested_vf_preset(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 20,80,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ip link set dev {self.nic100G_intf} vf 0 trust on",
+ f"ip link set {self.nic100G_intf} vf 1 mac 00:11:22:33:44:55", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmd = "port stop all"
+ self.pmd_con(cmd)
+
+ def verify_Requested_VF_id_is_valid(self, vfs_grp):
+ self.negative_case_for_requested_vf_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0",
+ ]
+ outputs = self.pmd_con(cmds)
+ expected = "node id: too many VSI for one TC (error 33)"
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+
+ def verify_Valid_number_of_TCs_for_the_target_VF(self, vfs_grp):
+ self.negative_case_for_requested_vf_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 63000 0 12500000000 0 0 0",
+ "add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ "ice_dcf_commit_check(): Not all enabled TC nodes are set",
+ "no error: (no stated reason) (error 0)", ]
+ self.check_output(expected, outputs[-1])
+ cmds = [
+ "add port tm node shaper profile 0 1 63000 0 12500000000 0 0 0",
+ "add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800000 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ "ice_dcf_commit_check(): Not all VFs are binded to TC1",
+ "no error: (no stated reason) (error 0)", ]
+ self.check_output(expected, outputs[-1])
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0", ]
+ outputs = self.pmd_con(cmds)
+ expected = "shaper profile id field (node params): shaper profile not exist (error 23)"
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+
+ def verify_Valid_Min_and_Max_values(self, vfs_grp):
+ self.negative_case_for_requested_vf_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 62999 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800000 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800000 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ "ice_dcf_execute_virtchnl_cmd(): No response (1 times) or return failure (-5) for cmd 37",
+ "ice_dcf_set_vf_bw(): fail to execute command VIRTCHNL_OP_DCF_CONFIG_BW",
+ "no error: (no stated reason) (error 0)", ]
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+ self.negative_case_for_requested_vf_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 63000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800000 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800000 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no", ]
+ outputs = self.pmd_con(cmds)
+ self.testpmd_close()
+ msg = "failed to set commands"
+ self.verify(all(['error' not in output.lower() for output in outputs]), msg)
+ self.negative_case_for_requested_vf_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 2001000 0 2000000 0 0 0",
+ "add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800000 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ "ice_dcf_execute_virtchnl_cmd(): No response (1 times) or return failure (-5) for cmd 37",
+ "ice_dcf_set_vf_bw(): fail to execute command VIRTCHNL_OP_DCF_CONFIG_BW",
+ "no error: (no stated reason) (error 0)", ]
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+ self.negative_case_for_requested_vf_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 2000000 0 2000000 0 0 0",
+ "add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800000 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes", ]
+ outputs = self.pmd_con(cmds)
+ self.testpmd_close()
+ msg = "failed to set commands"
+ self.verify(all(['error' not in output.lower() for output in outputs]), msg)
+ self.negative_case_for_requested_vf_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000000 0 12000000000 0 0 0",
+ "add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800000 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = "ice_dcf_validate_tc_bw(): Total value of TC0 min bandwidth and other TCs' max bandwidth 104000000kbps should be less than port link speed 100000000kbps"
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+
+ def verify_Valid_Min_and_Max_values_02(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 20,80,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ip link set dev {self.nic100G_intf} vf 0 trust on",
+ f"ip link set {self.nic100G_intf} vf 1 mac 00:11:22:33:44:55",
+ f"ip link set {self.nic100G_intf} vf 2 mac 00:11:22:33:44:66", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 10000000 0 1000000000 0 0 0",
+ "add port tm node shaper profile 0 2 10000000 0 8500000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 800 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ "ice_dcf_commit_check(): Not all VFs are binded to TC0",
+ "no error: (no stated reason) (error 0)", ]
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "add port tm node shaper profile 0 1 0 0 0 0 0 0",
+ "add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800000 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800000 0 1 2 1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 0],
+ [0, 3], ]
+ traffic_tasks = [
+ [[0], 100, (100, 'Gbps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=1024)
+ self.testpmd_close()
+
+ def negative_case_for_req_vf_to_update_its_queue_to_tc_mapping_preset(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up",
+ f"ip link set dev {self.nic100G_intf} vf 0 trust on",
+ f"ip link set {self.nic100G_intf} vf 1 mac 00:11:22:33:44:55", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmd = "port stop all"
+ self.pmd_con(cmd)
+
+ def verify_Total_number_of_queue_pairs_match_to_what_the_VF_is_allocated(self, vfs_grp):
+ self.negative_case_for_req_vf_to_update_its_queue_to_tc_mapping_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ "iavf_hierarchy_commit(): queue node is less than allocated queue pairs",
+ "no error: (no stated reason) (error 0)", ]
+ self.check_output(expected, outputs[-1])
+ cmds = [
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 8 700 0 1 2 0 0 0xffffffff 0 0",
+ ]
+ outputs = self.pmd_con(cmds)
+ expected = "num strict priorities field (node params): SP priority not supported (error 27)"
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+
+ def verify_Number_of_TCs_match_is_less_than_TC_enabled_on_the_VF(self, vfs_grp):
+ self.negative_case_for_req_vf_to_update_its_queue_to_tc_mapping_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ "ice_dcf_commit_check(): Not all VFs are binded to TC2",
+ "no error: (no stated reason) (error 0)", ]
+ self.check_output(expected, outputs[-1])
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes", ]
+ outputs = self.pmd_con(cmds)
+ expected = [
+ "iavf_hierarchy_commit(): Does not set VF vsi nodes to all TCs",
+ "no error: (no stated reason) (error 0)", ]
+ self.check_output(expected, outputs[-1])
+ cmds = [
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes", ]
+ outputs = self.pmd_con(cmds)
+ msg = "failed to set commands"
+ self.verify(all(['error' not in output.lower() for output in outputs]), msg)
+ stream_configs = [
+ [0, 0],
+ [0, 3], ]
+ traffic_tasks = [
+ [[0], 100, (100, 'rGbps')],
+ [[1], 100, (100, 'rGbps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=1024)
+ self.testpmd_close()
+
+ def verify_Number_of_TCs_match_is_more_than_TC_enabled_on_the_VF(self, vfs_grp):
+ self.negative_case_for_req_vf_to_update_its_queue_to_tc_mapping_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 600 1000 0 1 1 -1 1 0 0", ]
+ outputs = self.pmd_con(cmds)
+ expected = "node id: too many TCs (error 33)"
+ self.check_output(expected, outputs[-1])
+ cmds = [
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 6 600 0 1 2 2 0 0xffffffff 0 0", ]
+ outputs = self.pmd_con(cmds)
+ expected = "parent node id: parent not exist (error 19)"
+ self.check_output(expected, outputs[-1])
+ cmds = [
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 600 1000 0 1 1 0 1 0 0", ]
+ outputs = self.pmd_con(cmds)
+ expected = "node id: too many TCs (error 33)"
+ self.check_output(expected, outputs[-1])
+ cmds = [
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600 0 1 2 0 0 0xffffffff 0 0", ]
+ outputs = self.pmd_con(cmds)
+ expected = "parent node id: parent not exist (error 19)"
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+
+ def verify_overlap_between_queue_to_TC_mapping(self, vfs_grp):
+ self.negative_case_for_req_vf_to_update_its_queue_to_tc_mapping_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0", ]
+ outputs = self.pmd_con(cmds)
+ expected = "node id: node id already used (error 33)"
+ self.check_output(expected, outputs[-1])
+ self.testpmd_close()
+
+ def verify_Non_contiguous_TC_setting_in_queue_mapping(self, vfs_grp):
+ self.negative_case_for_req_vf_to_update_its_queue_to_tc_mapping_preset(vfs_grp)
+ cmds = [
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 yes",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 yes",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 2],
+ [0, 5],
+ [0, 3],
+ [0, 4], ]
+ traffic_tasks = [
+ [[0, 1], 25, (2, 'MBps')],
+ [[2], 25, (4, 'MBps')],
+ [[3], 25, (4, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=68)
+ self.testpmd_close()
+
+ def verify_different_vlan_ID(self, vfs_grp):
+ cmds = [
+ f"{self.dcbgetset} {self.nic100G_intf} --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0",
+ f"ifconfig {self.nic100G_intf} up", ]
+ self.d_a_con(cmds)
+ self.testpmd_start(vfs_grp)
+ cmds = [
+ "port stop all",
+ "vlan set filter on 1",
+ "rx_vlan add 1 1",
+ "rx_vlan add 2 1",
+ "add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0",
+ "add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0",
+ "add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0",
+ "add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0",
+ "add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0",
+ "add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0",
+ "port tm hierarchy commit 0 no",
+ "add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0",
+ "add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0",
+ "add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0",
+ "add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "port start all",
+ "set fwd mac",
+ "start", ]
+ self.pmd_con(cmds)
+ stream_configs = [
+ [0, 0],
+ [0, 1],
+ [0, 3],
+ [0, 4],
+ [1, 0],
+ [1, 3],
+ [2, 2],
+ [2, 4], ]
+ traffic_tasks = [
+ [[0, 1, 4, 6], 25, (2, 'MBps')],
+ [[2, 5], 25, (4, 'MBps')],
+ [[3, 7], 25, (4, 'MBps')],
+ [[0, 1, 2, 3, 4, 5, 6, 7], 25, (10, 'MBps')],
+ ]
+ self.check_traffic(stream_configs, traffic_tasks, frame_size=1024)
+ self.testpmd_close()
+
+ def suite_init(self):
+ self.dcbgetset = 'dcbgetset'
+ self.pf_preset()
+ self.vf_init()
+ self.testpmd_init()
+ self.pmd_stat = None
+
+ #
+ # Test cases.
+ #
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.suite_init()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ self.pf_restore()
+
+ def test_perf_strict_mode_check_peak_tb_rate(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_strict_mode_check_peak_tb_rate(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_ets_mode_check_peak_tb_rate(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g, self.nic_25g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_ets_mode_check_peak_tb_rate(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_strict_mode_check_cmit_tb_rate(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g, self.nic_25g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_strict_mode_check_cmit_tb_rate(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_ets_mode_check_cmit_tb_rate(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g, self.nic_25g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_ets_mode_check_cmit_tb_rate(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_iavf_VFs_strict_mode_check_peak_tb_rate(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 4])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_iavf_VFs_strict_mode_check_peak_tb_rate(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_iavf_VFs_strict_mode_check_cmit_tb_rate(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g, self.nic_25g], 3])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_iavf_VFs_strict_mode_check_cmit_tb_rate(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_iavf_VFs_ets_mode(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g, self.nic_25g], 3])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_iavf_VFs_ets_mode(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_strict_mode_8_TCs(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_strict_mode_8_TCs(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_strict_mode_1_TC(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_strict_mode_1_TC(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_ets_mode_8_TCs(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g, self.nic_25g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_ets_mode_8_TCs(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_ets_mode_1_TC(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g, self.nic_25g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_ets_mode_1_TC(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_query_qos_setting(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_query_qos_setting(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_pf_reset(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_pf_reset(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_vf_reset(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_vf_reset(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_link_status_change(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_link_status_change(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_DCB_setting_TC_change(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_DCB_setting_TC_change(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_Requested_VF_id_is_valid(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_Requested_VF_id_is_valid(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_Valid_number_of_TCs_for_the_target_VF(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_Valid_number_of_TCs_for_the_target_VF(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_Valid_Min_and_Max_values(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_Valid_Min_and_Max_values(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+ try:
+ self.vf_create(*[[self.nic_100g], 4])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_Valid_Min_and_Max_values_02(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_Total_number_of_queue_pairs_match_to_what_the_VF_is_allocated(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_Total_number_of_queue_pairs_match_to_what_the_VF_is_allocated(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_Number_of_TCs_match_is_less_than_TC_enabled_on_the_VF(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_Number_of_TCs_match_is_less_than_TC_enabled_on_the_VF(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_Number_of_TCs_match_is_more_than_TC_enabled_on_the_VF(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_Number_of_TCs_match_is_more_than_TC_enabled_on_the_VF(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_overlap_between_queue_to_TC_mapping(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_overlap_between_queue_to_TC_mapping(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_Non_contiguous_TC_setting_in_queue_mapping(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_Non_contiguous_TC_setting_in_queue_mapping(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def test_perf_different_vlan_ID(self):
+ except_content = None
+ try:
+ self.vf_create(*[[self.nic_100g], 2])
+ vfs_group = [
+ info.get('vfs_pci') for _, info in self.vf_ports_info.items()]
+ self.verify_different_vlan_ID(vfs_group)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.testpmd_close()
+ self.vf_destroy()
+ if except_content:
+ raise VerifyFailure(except_content)
--
2.21.0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-10-15 7:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-15 7:08 [dts] [PATCH V1 0/1] tests/cvl_dcf_qos: upload script Yufen Mo
2021-10-15 7:08 ` [dts] [PATCH V1 1/1] " Yufen Mo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).