From: Zhimin Huang <zhiminx.huang@intel.com>
To: dts@dpdk.org
Cc: Zhimin Huang <zhiminx.huang@intel.com>
Subject: [dts] [PATCH V1 1/2] test_plans/cvl_fdir:remove shared conter to adapt dpdk changed
Date: Fri, 29 Oct 2021 00:08:36 +0800 [thread overview]
Message-ID: <20211028160837.3575-1-zhiminx.huang@intel.com> (raw)
acorrding to dpdk commit 92ef4b8f1688ded571fb2085727e5e82f2afe5d6 code change.
remove shared on/off in fdir rule, sync testcase and testplan to adapt dpdk changed.
Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>
---
test_plans/cvl_fdir_test_plan.rst | 38 +++++++++++++++----------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/test_plans/cvl_fdir_test_plan.rst b/test_plans/cvl_fdir_test_plan.rst
index b5052578..4c4526d8 100644
--- a/test_plans/cvl_fdir_test_plan.rst
+++ b/test_plans/cvl_fdir_test_plan.rst
@@ -593,10 +593,10 @@ Test case: flow validation
flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions count / end
flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions queue index 1 / mark / count / end
- flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions rss queues 0 1 end / mark id 1 / count identifier 0x1234 shared on / end
- flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions passthru / mark id 2 / count identifier 0x34 shared off / end
- flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions mark id 3 / rss / count shared on / end
- flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions drop / count shared off / end
+ flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions rss queues 0 1 end / mark id 1 / count identifier 0x1234 / end
+ flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions passthru / mark id 2 / count identifier 0x34 / end
+ flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions mark id 3 / rss / count / end
+ flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions drop / count / end
get the message::
@@ -3670,13 +3670,13 @@ Subcase 2: count query identifier share
1. create filter rules::
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 / end actions queue index 1 / count identifier 0x1234 shared on / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.2 / end actions rss queues 2 3 end / count identifier 0x1234 shared on / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 / end actions passthru / mark / count identifier 0x1234 shared off / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 / end actions queue index 1 / count identifier 0x1234 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.2 / end actions rss queues 2 3 end / count identifier 0x1234 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 / end actions passthru / mark / count identifier 0x1234 / end
flow create 0 ingress pattern eth / ipv4 src is 192.168.0.4 / end actions mark id 1 / rss / count identifier 0x1234 / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.5 / end actions queue index 5 / count shared on / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.6 / end actions drop / count shared on / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.7 / end actions drop / count identifier 0x1235 shared on / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.5 / end actions queue index 5 / count / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.6 / end actions drop / count / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.7 / end actions drop / count identifier 0x1235 / end
flow create 0 ingress pattern eth / ipv4 src is 192.168.0.8 / end actions rss / count / end
2. send matched packets::
@@ -3704,13 +3704,13 @@ Subcase 2: count query identifier share
COUNT:
hits_set: 1
bytes_set: 0
- hits: 20
+ hits: 10
bytes: 0
testpmd> flow query 0 1 count
COUNT:
hits_set: 1
bytes_set: 0
- hits: 20
+ hits: 10
bytes: 0
testpmd> flow query 0 2 count
COUNT:
@@ -3728,13 +3728,13 @@ Subcase 2: count query identifier share
COUNT:
hits_set: 1
bytes_set: 0
- hits: 20
+ hits: 10
bytes: 0
testpmd> flow query 0 5 count
COUNT:
hits_set: 1
bytes_set: 0
- hits: 20
+ hits: 10
bytes: 0
testpmd> flow query 0 6 count
COUNT:
@@ -3986,13 +3986,13 @@ Subcase 3: two ports multi patterns count query
1. create filter rules::
- flow create 1 ingress pattern eth / ipv4 dst is 192.168.0.21 proto is 255 tos is 4 / end actions queue index 1 / mark id 1 / count identifier 0x1234 shared on / end
- flow create 1 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 hop is 2 tc is 1 / sctp src is 22 dst is 23 / end actions rss queues 6 7 end / mark id 2 / count identifier 0x1234 shared on / end
+ flow create 1 ingress pattern eth / ipv4 dst is 192.168.0.21 proto is 255 tos is 4 / end actions queue index 1 / mark id 1 / count identifier 0x1234 / end
+ flow create 1 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 hop is 2 tc is 1 / sctp src is 22 dst is 23 / end actions rss queues 6 7 end / mark id 2 / count identifier 0x1234 / end
flow create 1 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 hop is 2 tc is 1 / udp src is 22 dst is 23 / end actions rss queues 6 7 end / mark id 1 / count / end
flow create 1 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 hop is 2 tc is 1 / tcp src is 22 dst is 23 / end actions queue index 2 / mark / count / end
flow create 1 ingress pattern eth / ipv4 / udp / vxlan / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / end actions drop / count / end
flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 tos is 4 / tcp src is 22 dst is 23 / end actions drop / count / end
- flow create 0 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions queue index 1 / mark id 1 / count identifier 0x1234 shared on / end
+ flow create 0 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions queue index 1 / mark id 1 / count identifier 0x1234 / end
2. send matched packets::
@@ -4018,13 +4018,13 @@ Subcase 3: two ports multi patterns count query
COUNT:
hits_set: 1
bytes_set: 0
- hits: 20
+ hits: 10
bytes: 0
testpmd> flow query 1 1 count
COUNT:
hits_set: 1
bytes_set: 0
- hits: 20
+ hits: 10
bytes: 0
testpmd> flow query 1 2 count
COUNT:
--
2.17.1
next reply other threads:[~2021-10-28 7:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-28 16:08 Zhimin Huang [this message]
2021-10-28 16:08 ` [dts] [PATCH V1 2/2] tests/cvl_fdir:remove " Zhimin Huang
2021-10-28 7:43 ` Huang, ZhiminX
2021-11-05 13:31 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211028160837.3575-1-zhiminx.huang@intel.com \
--to=zhiminx.huang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).