* Re: [dts] [PATCH V1 2/2] tests/loopback_virtio_user_server_mode: add two new cases
2021-11-05 15:07 ` [dts] [PATCH V1 2/2] tests/loopback_virtio_user_server_mode: " Lingli Chen
@ 2021-11-05 7:17 ` Chen, LingliX
2021-11-05 9:10 ` Wang, Yinan
2021-11-22 8:32 ` [dts][PATCH " Wang, Yinan
1 sibling, 1 reply; 11+ messages in thread
From: Chen, LingliX @ 2021-11-05 7:17 UTC (permalink / raw)
To: dts; +Cc: Wang, Yinan
[-- Attachment #1: Type: text/plain, Size: 619 bytes --]
> -----Original Message-----
> From: Chen, LingliX <linglix.chen@intel.com>
> Sent: Friday, November 5, 2021 11:07 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Chen, LingliX
> <linglix.chen@intel.com>
> Subject: [dts][PATCH V1 2/2] tests/loopback_virtio_user_server_mode: add
> two new cases
>
> 1. Add 2 new cases: case 13, 14.
> 2. Modify case 3, 4, 8, 10 sync with testplan.
>
> Signed-off-by: Lingli Chen <linglix.chen@intel.com>
The new case 13, 14 are failed because dpdk bug: the payload are different in receive packets.
Tested-by: Lingli Chen <linglix.chen@intel.com>
[-- Attachment #2: TestLoopbackVirtioUserServerMode.log --]
[-- Type: application/octet-stream, Size: 46914 bytes --]
04/11/2021 19:26:43 dts:
TEST SUITE : TestLoopbackVirtioUserServerMode
04/11/2021 19:26:43 dts: NIC : fortville_spirit
04/11/2021 19:26:43 dut.10.240.183.214:
04/11/2021 19:26:44 tester:
04/11/2021 19:26:44 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:26:44 dut.10.240.183.214: 2048
04/11/2021 19:26:44 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_launch_virtio11_first Begin
04/11/2021 19:26:44 dut.10.240.183.214:
04/11/2021 19:26:44 tester:
04/11/2021 19:26:44 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:26:44 dut.10.240.183.214:
04/11/2021 19:26:44 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:26:44 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:26:48 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:26:48 dut.10.240.183.214: 2048
04/11/2021 19:27:23 TestLoopbackVirtioUserServerMode: ['lanuch virtio first', '64', 12.0547738, 1, '']
04/11/2021 19:27:23 TestLoopbackVirtioUserServerMode:
+---------------------+----------+------------------+--------------+-------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+=====================+==========+==================+==============+=======+
| lanuch virtio first | 64 | 12.055 | 1 | |
+---------------------+----------+------------------+--------------+-------+
04/11/2021 19:27:24 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_launch_virtio11_first Result PASSED:
04/11/2021 19:27:24 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:27:24 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:27:25 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:27:25 dut.10.240.183.214:
04/11/2021 19:27:25 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:27:25 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:27:25 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:27:26 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:27:28 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_launch_virtio_first Begin
04/11/2021 19:27:28 dut.10.240.183.214:
04/11/2021 19:27:28 tester:
04/11/2021 19:27:28 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:27:28 dut.10.240.183.214:
04/11/2021 19:27:28 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:27:28 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:27:32 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:27:32 dut.10.240.183.214: 2048
04/11/2021 19:28:07 TestLoopbackVirtioUserServerMode: ['lanuch virtio first', '64', 9.7538473, 1, '']
04/11/2021 19:28:07 TestLoopbackVirtioUserServerMode:
+---------------------+----------+------------------+--------------+-------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+=====================+==========+==================+==============+=======+
| lanuch virtio first | 64 | 9.754 | 1 | |
+---------------------+----------+------------------+--------------+-------+
04/11/2021 19:28:08 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_launch_virtio_first Result PASSED:
04/11/2021 19:28:08 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:28:09 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:28:09 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:28:09 dut.10.240.183.214:
04/11/2021 19:28:09 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:28:09 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:28:09 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:28:10 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:28:12 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_packed_and_split_mergeable_path_cbdma_payload_check Result SKIPPED:
04/11/2021 19:28:12 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_packed_and_split_mergeable_path_payload_check Begin
04/11/2021 19:28:12 dut.10.240.183.214:
04/11/2021 19:28:12 tester:
04/11/2021 19:28:12 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:28:12 dut.10.240.183.214:
04/11/2021 19:28:12 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:28:12 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:28:27 TestLoopbackVirtioUserServerMode: packed ring mergeable inorder path
04/11/2021 19:28:27 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:28:27 dut.10.240.183.214: 2048
04/11/2021 19:28:45 dut.10.240.183.214: scp -v root@10.240.183.214:/root/pdump-rx.pcap /root/pdump-rx.pcap
04/11/2021 19:28:59 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_packed_and_split_mergeable_path_payload_check Result FAILED: 'the payload in receive packets has been changed from 1'
04/11/2021 19:28:59 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:28:59 dut.10.240.183.214:
04/11/2021 19:29:00 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:29:00 dut.10.240.183.214:
04/11/2021 19:29:00 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:29:00 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:29:00 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:29:00 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:29:02 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_inorder_mergeable_path Begin
04/11/2021 19:29:02 dut.10.240.183.214:
04/11/2021 19:29:03 tester:
04/11/2021 19:29:03 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:29:03 dut.10.240.183.214:
04/11/2021 19:29:03 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:29:03 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:29:18 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:29:18 dut.10.240.183.214: 2048
04/11/2021 19:29:43 TestLoopbackVirtioUserServerMode: ['virtio1.0 inorder mergeable path', '8k', 1.5769919, 2, 'before reconnet']
04/11/2021 19:29:43 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:30:08 TestLoopbackVirtioUserServerMode: ['virtio1.0 inorder mergeable path', '8k', 1.5732103, 2, 'reconnet from vhost']
04/11/2021 19:30:08 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:30:09 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:30:09 dut.10.240.183.214: 2048
04/11/2021 19:30:34 TestLoopbackVirtioUserServerMode: ['virtio1.0 inorder mergeable path', '8k', 1.5740613, 2, 'reconnet from virtio_user']
04/11/2021 19:30:34 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:30:48 TestLoopbackVirtioUserServerMode: ['virtio1.0 inorder mergeable path', '8k', 1.5719376, 2, 'after port restart']
04/11/2021 19:30:48 TestLoopbackVirtioUserServerMode:
+----------------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+==================================+==========+==================+==============+===========================+
| virtio1.0 inorder mergeable path | 8k | 1.577 | 2 | before reconnet |
+----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 inorder mergeable path | 8k | 1.573 | 2 | reconnet from vhost |
+----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 inorder mergeable path | 8k | 1.574 | 2 | reconnet from virtio_user |
+----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 inorder mergeable path | 8k | 1.572 | 2 | after port restart |
+----------------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:30:50 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_inorder_mergeable_path Result PASSED:
04/11/2021 19:30:50 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:30:50 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:30:50 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:30:51 dut.10.240.183.214:
04/11/2021 19:30:51 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:30:51 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:30:51 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:30:51 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:30:53 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_inorder_non_mergeable_path Begin
04/11/2021 19:30:53 dut.10.240.183.214:
04/11/2021 19:30:53 tester:
04/11/2021 19:30:53 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:30:53 dut.10.240.183.214:
04/11/2021 19:30:53 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:30:53 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:31:08 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:31:08 dut.10.240.183.214: 2048
04/11/2021 19:31:33 TestLoopbackVirtioUserServerMode: ['virtio1.0 inorder non_mergeable path', '64', 20.7149378, 2, 'before reconnet']
04/11/2021 19:31:33 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:31:58 TestLoopbackVirtioUserServerMode: ['virtio1.0 inorder non_mergeable path', '64', 20.8325929, 2, 'reconnet from vhost']
04/11/2021 19:31:58 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:31:59 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:31:59 dut.10.240.183.214: 2048
04/11/2021 19:32:24 TestLoopbackVirtioUserServerMode: ['virtio1.0 inorder non_mergeable path', '64', 20.7243801, 2, 'reconnet from virtio_user']
04/11/2021 19:32:24 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:32:38 TestLoopbackVirtioUserServerMode: ['virtio1.0 inorder non_mergeable path', '64', 20.7297647, 2, 'after port restart']
04/11/2021 19:32:38 TestLoopbackVirtioUserServerMode:
+--------------------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+======================================+==========+==================+==============+===========================+
| virtio1.0 inorder non_mergeable path | 64 | 20.715 | 2 | before reconnet |
+--------------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 inorder non_mergeable path | 64 | 20.833 | 2 | reconnet from vhost |
+--------------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 inorder non_mergeable path | 64 | 20.724 | 2 | reconnet from virtio_user |
+--------------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 inorder non_mergeable path | 64 | 20.730 | 2 | after port restart |
+--------------------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:32:40 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_inorder_non_mergeable_path Result PASSED:
04/11/2021 19:32:40 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:32:40 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:32:41 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:32:41 dut.10.240.183.214:
04/11/2021 19:32:41 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:32:41 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:32:41 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:32:41 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:32:43 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_mergeable_path Begin
04/11/2021 19:32:43 dut.10.240.183.214:
04/11/2021 19:32:43 tester:
04/11/2021 19:32:43 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:32:43 dut.10.240.183.214:
04/11/2021 19:32:43 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:32:43 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:32:58 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:32:58 dut.10.240.183.214: 2048
04/11/2021 19:33:23 TestLoopbackVirtioUserServerMode: ['virtio1.0 mergeable path', '8k', 1.5073549, 8, 'before reconnet']
04/11/2021 19:33:23 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:33:48 TestLoopbackVirtioUserServerMode: ['virtio1.0 mergeable path', '8k', 1.4860629, 8, 'reconnet from vhost']
04/11/2021 19:33:48 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:33:49 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:33:49 dut.10.240.183.214: 2048
04/11/2021 19:34:14 TestLoopbackVirtioUserServerMode: ['virtio1.0 mergeable path', '8k', 1.5081543, 8, 'reconnet from virtio_user']
04/11/2021 19:34:14 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:34:29 TestLoopbackVirtioUserServerMode: ['virtio1.0 mergeable path', '8k', 1.4775541, 8, 'after port restart']
04/11/2021 19:34:29 TestLoopbackVirtioUserServerMode:
+--------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+==========================+==========+==================+==============+===========================+
| virtio1.0 mergeable path | 8k | 1.507 | 8 | before reconnet |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 mergeable path | 8k | 1.486 | 8 | reconnet from vhost |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 mergeable path | 8k | 1.508 | 8 | reconnet from virtio_user |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 mergeable path | 8k | 1.478 | 8 | after port restart |
+--------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:34:30 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_mergeable_path Result PASSED:
04/11/2021 19:34:30 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:34:30 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:34:31 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:34:31 dut.10.240.183.214:
04/11/2021 19:34:31 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:34:31 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:34:31 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:34:31 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:34:33 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_non_mergeable_path Begin
04/11/2021 19:34:33 dut.10.240.183.214:
04/11/2021 19:34:33 tester:
04/11/2021 19:34:33 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:34:34 dut.10.240.183.214:
04/11/2021 19:34:34 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:34:34 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:34:48 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:34:49 dut.10.240.183.214: 2048
04/11/2021 19:35:13 TestLoopbackVirtioUserServerMode: ['virtio1.0 non_mergeable path', '64', 20.2022327, 2, 'before reconnet']
04/11/2021 19:35:13 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:35:39 TestLoopbackVirtioUserServerMode: ['virtio1.0 non_mergeable path', '64', 20.3624433, 2, 'reconnet from vhost']
04/11/2021 19:35:39 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:35:39 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:35:39 dut.10.240.183.214: 2048
04/11/2021 19:36:05 TestLoopbackVirtioUserServerMode: ['virtio1.0 non_mergeable path', '64', 20.2223749, 2, 'reconnet from virtio_user']
04/11/2021 19:36:05 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:36:19 TestLoopbackVirtioUserServerMode: ['virtio1.0 non_mergeable path', '64', 20.2294573, 2, 'after port restart']
04/11/2021 19:36:19 TestLoopbackVirtioUserServerMode:
+------------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+==============================+==========+==================+==============+===========================+
| virtio1.0 non_mergeable path | 64 | 20.202 | 2 | before reconnet |
+------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 non_mergeable path | 64 | 20.362 | 2 | reconnet from vhost |
+------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 non_mergeable path | 64 | 20.222 | 2 | reconnet from virtio_user |
+------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 non_mergeable path | 64 | 20.229 | 2 | after port restart |
+------------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:36:20 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_non_mergeable_path Result PASSED:
04/11/2021 19:36:20 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:36:20 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:36:21 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:36:21 dut.10.240.183.214:
04/11/2021 19:36:21 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:36:21 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:36:21 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:36:21 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:36:23 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_vector_rx_path Begin
04/11/2021 19:36:24 dut.10.240.183.214:
04/11/2021 19:36:24 tester:
04/11/2021 19:36:24 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:36:24 dut.10.240.183.214:
04/11/2021 19:36:24 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:36:24 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:36:39 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:36:39 dut.10.240.183.214: 2048
04/11/2021 19:37:04 TestLoopbackVirtioUserServerMode: ['virtio1.0 vector_rx path', '64', 20.3121131, 2, 'before reconnet']
04/11/2021 19:37:04 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:37:29 TestLoopbackVirtioUserServerMode: ['virtio1.0 vector_rx path', '64', 20.3934441, 2, 'reconnet from vhost']
04/11/2021 19:37:29 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:37:30 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:37:30 dut.10.240.183.214: 2048
04/11/2021 19:37:55 TestLoopbackVirtioUserServerMode: ['virtio1.0 vector_rx path', '64', 20.3703938, 2, 'reconnet from virtio_user']
04/11/2021 19:37:55 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:38:09 TestLoopbackVirtioUserServerMode: ['virtio1.0 vector_rx path', '64', 20.3601064, 2, 'after port restart']
04/11/2021 19:38:09 TestLoopbackVirtioUserServerMode:
+--------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+==========================+==========+==================+==============+===========================+
| virtio1.0 vector_rx path | 64 | 20.312 | 2 | before reconnet |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 vector_rx path | 64 | 20.393 | 2 | reconnet from vhost |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 vector_rx path | 64 | 20.370 | 2 | reconnet from virtio_user |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.0 vector_rx path | 64 | 20.360 | 2 | after port restart |
+--------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:38:11 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio10_vector_rx_path Result PASSED:
04/11/2021 19:38:11 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:38:11 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:38:11 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:38:11 dut.10.240.183.214:
04/11/2021 19:38:11 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:38:12 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:38:12 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:38:12 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:38:14 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_inorder_mergeable_path Begin
04/11/2021 19:38:14 dut.10.240.183.214:
04/11/2021 19:38:14 tester:
04/11/2021 19:38:14 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:38:14 dut.10.240.183.214:
04/11/2021 19:38:14 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:38:14 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:38:29 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:38:29 dut.10.240.183.214: 2048
04/11/2021 19:38:54 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder mergeable path', '8k', 1.4453443, 8, 'before reconnet']
04/11/2021 19:38:54 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:39:19 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder mergeable path', '8k', 1.4279112, 8, 'reconnet from vhost']
04/11/2021 19:39:19 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:39:20 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:39:20 dut.10.240.183.214: 2048
04/11/2021 19:39:45 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder mergeable path', '8k', 1.4523686, 8, 'reconnet from virtio user']
04/11/2021 19:39:45 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:39:59 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder mergeable path', '8k', 1.4518755, 8, 'after port restart']
04/11/2021 19:39:59 TestLoopbackVirtioUserServerMode:
+----------------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+==================================+==========+==================+==============+===========================+
| virtio1.1 inorder mergeable path | 8k | 1.445 | 8 | before reconnet |
+----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder mergeable path | 8k | 1.428 | 8 | reconnet from vhost |
+----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder mergeable path | 8k | 1.452 | 8 | reconnet from virtio user |
+----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder mergeable path | 8k | 1.452 | 8 | after port restart |
+----------------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:40:01 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_inorder_mergeable_path Result PASSED:
04/11/2021 19:40:01 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:40:01 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:40:02 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:40:02 dut.10.240.183.214:
04/11/2021 19:40:02 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:40:02 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:40:02 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:40:02 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:40:04 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_inorder_non_mergeable_path Begin
04/11/2021 19:40:04 dut.10.240.183.214:
04/11/2021 19:40:04 tester:
04/11/2021 19:40:04 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:40:04 dut.10.240.183.214:
04/11/2021 19:40:04 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:40:04 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:40:19 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:40:19 dut.10.240.183.214: 2048
04/11/2021 19:40:44 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder non_mergeable path', '64', 28.0632728, 2, 'before reconnet']
04/11/2021 19:40:44 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:41:09 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder non_mergeable path', '64', 28.5540349, 2, 'reconnet from vhost']
04/11/2021 19:41:09 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:41:10 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:41:10 dut.10.240.183.214: 2048
04/11/2021 19:41:35 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder non_mergeable path', '64', 28.0308287, 2, 'reconnet from virtio_user']
04/11/2021 19:41:35 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:41:50 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder non_mergeable path', '64', 28.6723201, 2, 'after port restart']
04/11/2021 19:41:50 TestLoopbackVirtioUserServerMode:
+--------------------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+======================================+==========+==================+==============+===========================+
| virtio1.1 inorder non_mergeable path | 64 | 28.063 | 2 | before reconnet |
+--------------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder non_mergeable path | 64 | 28.554 | 2 | reconnet from vhost |
+--------------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder non_mergeable path | 64 | 28.031 | 2 | reconnet from virtio_user |
+--------------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder non_mergeable path | 64 | 28.672 | 2 | after port restart |
+--------------------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:41:51 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_inorder_non_mergeable_path Result PASSED:
04/11/2021 19:41:51 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:41:51 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:41:52 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:41:52 dut.10.240.183.214:
04/11/2021 19:41:52 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:41:52 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:41:52 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:41:52 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:41:54 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_inorder_vectorized_path Begin
04/11/2021 19:41:54 dut.10.240.183.214:
04/11/2021 19:41:55 tester:
04/11/2021 19:41:55 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:41:55 dut.10.240.183.214:
04/11/2021 19:41:55 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:41:55 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:42:10 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:42:10 dut.10.240.183.214: 2048
04/11/2021 19:42:35 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder vectorized path', '64', 28.1734528, 2, 'before reconnet']
04/11/2021 19:42:35 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:43:00 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder vectorized path', '64', 28.1326546, 2, 'reconnet from vhost']
04/11/2021 19:43:00 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:43:00 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:43:01 dut.10.240.183.214: 2048
04/11/2021 19:43:26 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder vectorized path', '64', 28.1661324, 2, 'reconnet from virtio_user']
04/11/2021 19:43:26 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:43:40 TestLoopbackVirtioUserServerMode: ['virtio1.1 inorder vectorized path', '64', 28.2289345, 2, 'after port restart']
04/11/2021 19:43:40 TestLoopbackVirtioUserServerMode:
+-----------------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+===================================+==========+==================+==============+===========================+
| virtio1.1 inorder vectorized path | 64 | 28.173 | 2 | before reconnet |
+-----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder vectorized path | 64 | 28.133 | 2 | reconnet from vhost |
+-----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder vectorized path | 64 | 28.166 | 2 | reconnet from virtio_user |
+-----------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 inorder vectorized path | 64 | 28.229 | 2 | after port restart |
+-----------------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:43:41 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_inorder_vectorized_path Result PASSED:
04/11/2021 19:43:41 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:43:41 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:43:42 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:43:42 dut.10.240.183.214:
04/11/2021 19:43:42 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:43:42 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:43:42 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:43:43 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:43:45 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_mergeable_path Begin
04/11/2021 19:43:45 dut.10.240.183.214:
04/11/2021 19:43:45 tester:
04/11/2021 19:43:45 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:43:45 dut.10.240.183.214:
04/11/2021 19:43:45 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:43:45 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:44:00 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:44:00 dut.10.240.183.214: 2048
04/11/2021 19:44:25 TestLoopbackVirtioUserServerMode: ['virtio1.1 mergeable path', '8k', 1.4523455, 2, 'before reconnet']
04/11/2021 19:44:25 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:44:50 TestLoopbackVirtioUserServerMode: ['virtio1.1 mergeable path', '8k', 1.4243256, 2, 'reconnet from vhost']
04/11/2021 19:44:50 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:44:51 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:44:51 dut.10.240.183.214: 2048
04/11/2021 19:45:16 TestLoopbackVirtioUserServerMode: ['virtio1.1 mergeable path', '8k', 1.454213, 2, 'reconnet from virtio user']
04/11/2021 19:45:16 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:45:30 TestLoopbackVirtioUserServerMode: ['virtio1.1 mergeable path', '8k', 1.4461724, 2, 'after port restart']
04/11/2021 19:45:30 TestLoopbackVirtioUserServerMode:
+--------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+==========================+==========+==================+==============+===========================+
| virtio1.1 mergeable path | 8k | 1.452 | 2 | before reconnet |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 mergeable path | 8k | 1.424 | 2 | reconnet from vhost |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 mergeable path | 8k | 1.454 | 2 | reconnet from virtio user |
+--------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 mergeable path | 8k | 1.446 | 2 | after port restart |
+--------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:45:32 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_mergeable_path Result PASSED:
04/11/2021 19:45:32 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:45:32 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:45:33 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:45:33 dut.10.240.183.214:
04/11/2021 19:45:33 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:45:33 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:45:33 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:45:33 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:45:35 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_non_mergeable_path Begin
04/11/2021 19:45:35 dut.10.240.183.214:
04/11/2021 19:45:35 tester:
04/11/2021 19:45:35 dut.10.240.183.214: rm -rf ./vhost-net*
04/11/2021 19:45:35 dut.10.240.183.214:
04/11/2021 19:45:35 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:45:35 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:45:50 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:45:50 dut.10.240.183.214: 2048
04/11/2021 19:46:15 TestLoopbackVirtioUserServerMode: ['virtio1.1 non_mergeable path', '64', 27.8852362, 2, 'before reconnet']
04/11/2021 19:46:15 TestLoopbackVirtioUserServerMode: now reconnet from vhost
04/11/2021 19:46:40 TestLoopbackVirtioUserServerMode: ['virtio1.1 non_mergeable path', '64', 27.9878911, 2, 'reconnet from vhost']
04/11/2021 19:46:40 TestLoopbackVirtioUserServerMode: now reconnet from virtio_user
04/11/2021 19:46:41 dut.10.240.183.214: cat /proc/meminfo |grep Hugepagesize|awk '{print($2)}'
04/11/2021 19:46:41 dut.10.240.183.214: 2048
04/11/2021 19:47:06 TestLoopbackVirtioUserServerMode: ['virtio1.1 non_mergeable path', '64', 27.9131878, 2, 'reconnet from virtio_user']
04/11/2021 19:47:06 TestLoopbackVirtioUserServerMode: now vhost port restart
04/11/2021 19:47:20 TestLoopbackVirtioUserServerMode: ['virtio1.1 non_mergeable path', '64', 28.042067, 2, 'after port restart']
04/11/2021 19:47:20 TestLoopbackVirtioUserServerMode:
+------------------------------+----------+------------------+--------------+---------------------------+
| Mode | Pkt_size | Throughput(Mpps) | Queue Number | Cycle |
+==============================+==========+==================+==============+===========================+
| virtio1.1 non_mergeable path | 64 | 27.885 | 2 | before reconnet |
+------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 non_mergeable path | 64 | 27.988 | 2 | reconnet from vhost |
+------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 non_mergeable path | 64 | 27.913 | 2 | reconnet from virtio_user |
+------------------------------+----------+------------------+--------------+---------------------------+
| virtio1.1 non_mergeable path | 64 | 28.042 | 2 | after port restart |
+------------------------------+----------+------------------+--------------+---------------------------+
04/11/2021 19:47:22 TestLoopbackVirtioUserServerMode: Test Case test_server_mode_reconnect_with_virtio11_non_mergeable_path Result PASSED:
04/11/2021 19:47:22 dut.10.240.183.214: killall -s INT dpdk-testpmd
04/11/2021 19:47:22 dut.10.240.183.214: dpdk-testpmd: no process found
04/11/2021 19:47:23 dut.10.240.183.214: modprobe ioatdma
04/11/2021 19:47:23 dut.10.240.183.214:
04/11/2021 19:47:23 dut.10.240.183.214: ./usertools/dpdk-devbind.py -u
04/11/2021 19:47:23 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:47:23 dut.10.240.183.214: ./usertools/dpdk-devbind.py --force --bind=ioatdma
04/11/2021 19:47:23 dut.10.240.183.214: Error: No devices specified.
usage: dpdk-devbind.py [-h] [-s] [--status-dev {baseband,compress,crypto,dma,event,mempool,misc,net,regex}] [-b DRIVER | -u] [--force] [DEVICE [DEVICE ...]]
04/11/2021 19:47:25 dts:
TEST SUITE ENDED: TestLoopbackVirtioUserServerMode
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dts] [PATCH V1 2/2] tests/loopback_virtio_user_server_mode: add two new cases
2021-11-05 7:17 ` Chen, LingliX
@ 2021-11-05 9:10 ` Wang, Yinan
0 siblings, 0 replies; 11+ messages in thread
From: Wang, Yinan @ 2021-11-05 9:10 UTC (permalink / raw)
To: Chen, LingliX, dts
Acked-by: Yinan Wang <yinan.wang@intel.com>
> -----Original Message-----
> From: Chen, LingliX <linglix.chen@intel.com>
> Sent: 2021?11?5? 15:18
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: RE: [dts][PATCH V1 2/2] tests/loopback_virtio_user_server_mode:
> add two new cases
>
>
> > -----Original Message-----
> > From: Chen, LingliX <linglix.chen@intel.com>
> > Sent: Friday, November 5, 2021 11:07 PM
> > To: dts@dpdk.org
> > Cc: Wang, Yinan <yinan.wang@intel.com>; Chen, LingliX
> > <linglix.chen@intel.com>
> > Subject: [dts][PATCH V1 2/2] tests/loopback_virtio_user_server_mode: add
> > two new cases
> >
> > 1. Add 2 new cases: case 13, 14.
> > 2. Modify case 3, 4, 8, 10 sync with testplan.
> >
> > Signed-off-by: Lingli Chen <linglix.chen@intel.com>
>
> The new case 13, 14 are failed because dpdk bug: the payload are different in
> receive packets.
>
> Tested-by: Lingli Chen <linglix.chen@intel.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: add two new cases
2021-11-05 15:07 ` [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: " Lingli Chen
@ 2021-11-05 14:38 ` Tu, Lijuan
2021-11-08 6:31 ` Chen, LingliX
0 siblings, 1 reply; 11+ messages in thread
From: Tu, Lijuan @ 2021-11-05 14:38 UTC (permalink / raw)
To: Chen, LingliX, dts; +Cc: Wang, Yinan, Chen, LingliX
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Lingli Chen
> Sent: 2021年11月5日 23:07
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Chen, LingliX
> <linglix.chen@intel.com>
> Subject: [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode:
> add two new cases
>
> 1. Case 3, Case 10 change to 8 queues.
> 2. Case 4, Case 8 add 8k packets.
> 3. Add 2 new cases: case 13, 14.
Could you please explain why do these changes ?
^ permalink raw reply [flat|nested] 11+ messages in thread
* [dts] [PATCH V1 0/2] loopback_virtio_user_server_mode: add two new cases
@ 2021-11-05 15:07 Lingli Chen
2021-11-05 15:07 ` [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: " Lingli Chen
2021-11-05 15:07 ` [dts] [PATCH V1 2/2] tests/loopback_virtio_user_server_mode: " Lingli Chen
0 siblings, 2 replies; 11+ messages in thread
From: Lingli Chen @ 2021-11-05 15:07 UTC (permalink / raw)
To: dts; +Cc: yinan.wang, Lingli Chen
loopback_virtio_user_server_mode test_plans and test suite add two new cases
Lingli Chen (2):
test_plans/loopback_virtio_user_server_mode: add two new cases
tests/loopback_virtio_user_server_mode: add two new cases
...back_virtio_user_server_mode_test_plan.rst | 242 +++++++++---
...tSuite_loopback_virtio_user_server_mode.py | 353 +++++++++++++++---
2 files changed, 482 insertions(+), 113 deletions(-)
--
2.33.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: add two new cases
2021-11-05 15:07 [dts] [PATCH V1 0/2] loopback_virtio_user_server_mode: add two new cases Lingli Chen
@ 2021-11-05 15:07 ` Lingli Chen
2021-11-05 14:38 ` Tu, Lijuan
2021-11-05 15:07 ` [dts] [PATCH V1 2/2] tests/loopback_virtio_user_server_mode: " Lingli Chen
1 sibling, 1 reply; 11+ messages in thread
From: Lingli Chen @ 2021-11-05 15:07 UTC (permalink / raw)
To: dts; +Cc: yinan.wang, Lingli Chen
1. Case 3, Case 10 change to 8 queues.
2. Case 4, Case 8 add 8k packets.
3. Add 2 new cases: case 13, 14.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
...back_virtio_user_server_mode_test_plan.rst | 242 ++++++++++++++----
1 file changed, 187 insertions(+), 55 deletions(-)
diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
index 18d580f4..810db9ea 100644
--- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
+++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
@@ -84,35 +84,38 @@ Test Case 2: Basic test for split ring server mode
Test Case 3: loopback reconnect test with split ring mergeable path and server mode
===================================================================================
-1. launch vhost as client mode with 2 queues::
+1. launch vhost as client mode with 8 queues::
rm -rf vhost-net*
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 8 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
testpmd> show port info 0
#it should show "down"
-4. Relaunch vhost and send packets::
+4. Relaunch vhost and send chain packets::
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -130,22 +133,24 @@ Test Case 3: loopback reconnect test with split ring mergeable path and server m
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -164,13 +169,15 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues, check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -182,9 +189,10 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -205,19 +213,21 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1\
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -236,13 +246,14 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -256,7 +267,7 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -279,13 +290,13 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -308,13 +319,14 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -328,7 +340,7 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -351,13 +363,13 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -380,13 +392,14 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -400,7 +413,7 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -423,13 +436,13 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -452,13 +465,15 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -470,9 +485,10 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -493,19 +509,21 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -524,13 +542,14 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -544,7 +563,7 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -567,13 +586,13 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -588,21 +607,23 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
Test Case 10: loopback reconnect test with packed ring inorder mergeable path and server mode
=============================================================================================
-1. launch vhost as client mode with 2 queues::
+1. launch vhost as client mode with 8 queues::
rm -rf vhost-net*
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 8 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -612,11 +633,12 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
4. Relaunch vhost and send packets::
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -634,22 +656,24 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -668,13 +692,14 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -688,7 +713,7 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -711,13 +736,13 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -740,13 +765,14 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --log-level=pmd.net.virtio.driver,8 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -760,7 +786,7 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -783,13 +809,13 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -800,3 +826,109 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
11. Check each RX/TX queue has packets::
testpmd>stop
+
+Test Case 13: loopback packed ring and split ring mergeable path payload check test using server mode and multi-queues
+======================================================================================================================
+
+1. launch vhost::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32-33 --no-pci --file-prefix=vhost -n 4 --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1' -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+
+2. Launch virtio-user with packed ring mergeable inorder path::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio -- --pdump 'device_id=net_virtio_user0,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
+
+4. Send large pkts from vhost::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 2000,2000,2000,2000
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> stop
+
+5. Quit pdump, check all the packets length are 8000 Byte in the pcap file, and the payload in receive packets are same.
+
+6. Quit and relaunch vhost and rerun step3-5.
+
+7. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+8. Rerun step3-6.
+
+9. Quit and relaunch virtio with split ring mergeable inorder path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+10. Rerun step3-6.
+
+11. Quit and relaunch virtio with split ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+12. Rerun step3-6.
+
+Test Case 14: loopback packed ring and split ring mergeable path cbdma test payload check with server mode and multi-queues
+===========================================================================================================================
+
+1. bind 8 cbdma port to vfio-pci and launch vhost::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32-33 -n 4 --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+
+2. Launch virtio-user with packed ring mergeable inorder path::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio-user0 -- --pdump 'device_id=net_virtio_user0,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
+
+4. Send large pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> vhost enable tx all
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,64,64,2000,2000,2000
+ testpmd> start tx_first 32
+ testpmd> stop
+
+5. Quit pdump, check all the packets length are 6192 Byte in the pcap file, and the payload in receive packets are same.
+
+6. Quit and relaunch vhost and rerun step3-5.
+
+7. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+8. Rerun step3-6.
+
+9. Quit and relaunch virtio with split ring mergeable inorder path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+10. Rerun step3-6.
+
+11. Quit and relaunch virtio with split ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+12. Rerun step3-6.
--
2.33.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [dts] [PATCH V1 2/2] tests/loopback_virtio_user_server_mode: add two new cases
2021-11-05 15:07 [dts] [PATCH V1 0/2] loopback_virtio_user_server_mode: add two new cases Lingli Chen
2021-11-05 15:07 ` [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: " Lingli Chen
@ 2021-11-05 15:07 ` Lingli Chen
2021-11-05 7:17 ` Chen, LingliX
2021-11-22 8:32 ` [dts][PATCH " Wang, Yinan
1 sibling, 2 replies; 11+ messages in thread
From: Lingli Chen @ 2021-11-05 15:07 UTC (permalink / raw)
To: dts; +Cc: yinan.wang, Lingli Chen
1. Add 2 new cases: case 13, 14.
2. Modify case 3, 4, 8, 10 sync with testplan.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
...tSuite_loopback_virtio_user_server_mode.py | 353 +++++++++++++++---
1 file changed, 295 insertions(+), 58 deletions(-)
diff --git a/tests/TestSuite_loopback_virtio_user_server_mode.py b/tests/TestSuite_loopback_virtio_user_server_mode.py
index 7fbfe804..119b178f 100644
--- a/tests/TestSuite_loopback_virtio_user_server_mode.py
+++ b/tests/TestSuite_loopback_virtio_user_server_mode.py
@@ -37,11 +37,10 @@ Test loopback virtio-user server mode
"""
import re
import time
-
import framework.utils as utils
from framework.pmd_output import PmdOutput
from framework.test_case import TestCase
-
+from framework.packet import Packet
class TestLoopbackVirtioUserServerMode(TestCase):
@@ -61,6 +60,12 @@ class TestLoopbackVirtioUserServerMode(TestCase):
self.core_list_host = self.core_list[3:6]
self.path=self.dut.apps_name['test-pmd']
self.testpmd_name = self.path.split("/")[-1]
+ self.app_pdump = self.dut.apps_name['pdump']
+ self.dump_pcap = "/root/pdump-rx.pcap"
+ self.device_str = ''
+ self.dut_ports = self.dut.get_ports()
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+ self.cbdma_dev_infos = []
def set_up(self):
"""
@@ -108,13 +113,17 @@ class TestLoopbackVirtioUserServerMode(TestCase):
if set_fwd_mac:
self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
- def lanuch_vhost_testpmd_with_multi_queue(self, extern_params=""):
+ def lanuch_vhost_testpmd_with_multi_queue(self, extern_params="", set_fwd_mac=True):
"""
start testpmd with multi qeueue
"""
- self.lanuch_vhost_testpmd(self.queue_number, self.nb_cores, extern_params=extern_params)
+ eal_params = "--vdev 'eth_vhost0,iface=vhost-net,client=1,queues={}'".format(self.queue_number)
+ param = "--rxq={} --txq={} --nb-cores={} {}".format(self.queue_number, self.queue_number, self.nb_cores, extern_params)
+ self.vhost_pmd.start_testpmd(self.core_list_host, param=param, no_pci=True, ports=[], eal_param=eal_params, prefix='vhost', fixed_prefix=True)
+ if set_fwd_mac:
+ self.vhost_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
- def lanuch_virtio_user_testpmd_with_multi_queue(self, mode, extern_params=""):
+ def lanuch_virtio_user_testpmd_with_multi_queue(self, mode, extern_params="", set_fwd_mac=True):
"""
start testpmd of vhost user
"""
@@ -126,7 +135,8 @@ class TestLoopbackVirtioUserServerMode(TestCase):
param = "{} --nb-cores={} --rxq={} --txq={}".format(extern_params, self.nb_cores, self.queue_number, self.queue_number)
self.virtio_user_pmd.start_testpmd(cores=self.core_list_user, param=param, eal_param=eal_param, \
no_pci=True, ports=[], prefix="virtio", fixed_prefix=True)
- self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
+ if set_fwd_mac:
+ self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
def start_to_send_packets(self, session_rx, session_tx):
"""
@@ -136,6 +146,35 @@ class TestLoopbackVirtioUserServerMode(TestCase):
session_rx.send_command("start", 3)
session_tx.send_expect("start tx_first 32", "testpmd> ", 30)
+ def start_to_send_8k_packets(self, session_rx, session_tx):
+ """
+ start the testpmd of vhost-user and virtio-user
+ start to send 8k packets
+ """
+ session_rx.send_command("start", 3)
+ session_tx.send_expect("set txpkts 2000,2000,2000,2000", "testpmd> ", 30)
+ session_tx.send_expect("start tx_first 32", "testpmd> ", 30)
+
+ def start_to_send_8k_packets_csum(self, session_tx):
+ """
+ start the testpmd of vhost-user, start to send 8k packets
+ """
+ session_tx.send_expect("set fwd csum", "testpmd> ", 30)
+ session_tx.send_expect("set txpkts 2000,2000,2000,2000", "testpmd> ", 30)
+ session_tx.send_expect("set burst 1", "testpmd> ", 30)
+ session_tx.send_expect("start tx_first 1", "testpmd> ", 10)
+ session_tx.send_expect("stop", "testpmd> ", 30)
+
+ def start_to_send_8k_packets_csum_cbdma(self, session_tx):
+ """
+ start the testpmd of vhost-user, start to send 8k packets
+ """
+ session_tx.send_expect("vhost enable tx all", "testpmd> ", 30)
+ session_tx.send_expect("set fwd csum", "testpmd> ", 30)
+ session_tx.send_expect("set txpkts 64,64,64,2000,2000,2000", "testpmd> ", 30)
+ session_tx.send_expect("start tx_first 32", "testpmd> ", 5)
+ session_tx.send_expect("stop", "testpmd> ", 30)
+
def check_port_throughput_after_port_stop(self):
"""
check the throughput after port stop
@@ -182,6 +221,74 @@ class TestLoopbackVirtioUserServerMode(TestCase):
self.check_port_link_status_after_port_restart()
self.vhost_pmd.execute_cmd("start tx_first 32", "testpmd> ", 120)
+ def port_restart_send_8k_packets(self):
+ self.vhost_pmd.execute_cmd("stop", "testpmd> ", 120)
+ self.vhost_pmd.execute_cmd("port stop 0", "testpmd> ", 120)
+ self.check_port_throughput_after_port_stop()
+ self.vhost_pmd.execute_cmd("clear port stats all", "testpmd> ", 120)
+ self.vhost_pmd.execute_cmd("port start 0", "testpmd> ", 120)
+ self.check_port_link_status_after_port_restart()
+ self.vhost_pmd.execute_cmd("set txpkts 2000,2000,2000,2000", "testpmd> ", 120)
+ self.vhost_pmd.execute_cmd("start tx_first 32", "testpmd> ", 120)
+
+ def launch_pdump_to_capture_pkt(self, dump_port):
+ """
+ bootup pdump in dut
+ """
+ self.pdump_session = self.dut.new_session(suite="pdump")
+ cmd = self.app_pdump + " " + \
+ "-v --file-prefix=virtio -- " + \
+ "--pdump 'device_id=%s,queue=*,rx-dev=%s,mbuf-size=8000'"
+ self.pdump_session.send_expect(cmd % (dump_port, self.dump_pcap), 'Port')
+
+ def check_packet_payload_valid(self, pkt_len):
+ """
+ check the payload is valid
+ """
+ self.pdump_session.send_expect('^c', '# ', 60)
+ time.sleep(3)
+ self.dut.session.copy_file_from(src="%s" % self.dump_pcap, dst="%s" % self.dump_pcap)
+ pkt = Packet()
+ pkts = pkt.read_pcapfile(self.dump_pcap)
+ data = str(pkts[0]['Raw'])
+
+ for i in range(len(pkts)):
+ self.verify(len(pkts[i]) == pkt_len, "virtio-user0 receive packet's length not equal %s Byte" %pkt_len)
+ value = str(pkts[i]['Raw'])
+ self.verify(data == value, "the payload in receive packets has been changed from %s" %i)
+ self.dut.send_expect("rm -rf %s" % self.dump_pcap, "#")
+
+ def relanuch_vhost_testpmd_send_8k_packets(self, extern_params, cbdma=False):
+
+ self.vhost_pmd.execute_cmd("quit", "#", 60)
+ self.logger.info('now reconnet from vhost')
+ if cbdma:
+ self.lanuch_vhost_testpmd_with_cbdma(extern_params=extern_params)
+ else:
+ self.lanuch_vhost_testpmd_with_multi_queue(extern_params=extern_params, set_fwd_mac=False)
+ self.launch_pdump_to_capture_pkt(self.vuser0_port)
+ if cbdma:
+ self.start_to_send_8k_packets_csum_cbdma(self.vhost)
+ else:
+ self.start_to_send_8k_packets_csum(self.vhost)
+ self.check_packet_payload_valid(self.pkt_len)
+
+ def relanuch_virtio_testpmd_with_multi_path(self, mode, case_info, extern_params, cbdma=False):
+
+ self.virtio_user_pmd.execute_cmd("quit", "#", 60)
+ self.logger.info(case_info)
+ self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params, set_fwd_mac=False)
+ self.virtio_user_pmd.execute_cmd("set fwd csum")
+ self.virtio_user_pmd.execute_cmd("start")
+ self.launch_pdump_to_capture_pkt(self.vuser0_port)
+ if cbdma:
+ self.start_to_send_8k_packets_csum_cbdma(self.vhost)
+ else:
+ self.start_to_send_8k_packets_csum(self.vhost)
+ self.check_packet_payload_valid(self.pkt_len)
+
+ self.relanuch_vhost_testpmd_send_8k_packets(extern_params, cbdma)
+
def relanuch_vhost_testpmd_with_multi_queue(self):
self.vhost_pmd.execute_cmd("quit", "#", 60)
self.check_link_status(self.virtio_user, "down")
@@ -192,7 +299,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
self.check_link_status(self.vhost, "down")
self.lanuch_virtio_user_testpmd_with_multi_queue(mode, extern_params)
- def calculate_avg_throughput(self, case_info, cycle):
+ def calculate_avg_throughput(self, case_info, cycle, Pkt_size=True):
"""
calculate the average throughput
"""
@@ -206,14 +313,19 @@ class TestLoopbackVirtioUserServerMode(TestCase):
result = lines.group(1)
results += float(result)
Mpps = results / (1000000 * 10)
- self.verify(Mpps > 5, "port can not receive packets")
-
results_row.append(case_info)
- results_row.append('64')
+ if Pkt_size:
+ self.verify(Mpps > 5, "port can not receive packets")
+ results_row.append('64')
+ else:
+ self.verify(Mpps > 1, "port can not receive packets")
+ results_row.append('8k')
+
results_row.append(Mpps)
results_row.append(self.queue_number)
results_row.append(cycle)
self.result_table_add(results_row)
+ self.logger.info(results_row)
def check_packets_of_each_queue(self):
"""
@@ -247,7 +359,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_launch_virtio_first(self):
"""
- basic test for virtio-user server mode, launch virtio-user first
+ Test Case 2: basic test for split ring server mode, launch virtio-user first
"""
self.queue_number = 1
self.nb_cores = 1
@@ -263,7 +375,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_launch_virtio11_first(self):
"""
- basic test for virtio-user server mode, launch virtio-user first
+ Test Case 1: basic test for packed ring server mode, launch virtio-user first
"""
self.queue_number = 1
self.nb_cores = 1
@@ -279,7 +391,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_mergeable_path(self):
"""
- reconnect test with virtio 1.1 mergeable path and server mode
+ Test Case 8: reconnect test with virtio 1.1 mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -288,25 +400,25 @@ class TestLoopbackVirtioUserServerMode(TestCase):
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "before reconnet")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "before reconnet", Pkt_size=False)
# reconnect from vhost
self.logger.info('now reconnet from vhost')
self.relanuch_vhost_testpmd_with_multi_queue()
- self.start_to_send_packets(self.virtio_user, self.vhost)
- self.calculate_avg_throughput(case_info, "reconnet from vhost")
+ self.start_to_send_8k_packets(self.virtio_user, self.vhost)
+ self.calculate_avg_throughput(case_info, "reconnet from vhost", Pkt_size=False)
# reconnet from virtio
self.logger.info('now reconnet from virtio_user')
self.relanuch_virtio_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "reconnet from virtio user")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "reconnet from virtio user", Pkt_size=False)
# port restart
self.logger.info('now vhost port restart')
- self.port_restart()
- self.calculate_avg_throughput(case_info, "after port restart")
+ self.port_restart_send_8k_packets()
+ self.calculate_avg_throughput(case_info, "after port restart", Pkt_size=False)
self.result_table_print()
self.check_packets_of_each_queue()
@@ -314,7 +426,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_non_mergeable_path(self):
"""
- reconnect test with virtio 1.1 non_mergeable path and server mode
+ Test Case 9: reconnect test with virtio 1.1 non_mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -349,34 +461,34 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_inorder_mergeable_path(self):
"""
- reconnect test with virtio 1.1 inorder mergeable path and server mode
+ Test Case 10: reconnect test with virtio 1.1 inorder mergeable path and server mode
"""
- self.queue_number = 2
+ self.queue_number = 8
self.nb_cores = 2
case_info = 'virtio1.1 inorder mergeable path'
mode = "packed_vq=1,in_order=1,mrg_rxbuf=1"
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "before reconnet")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "before reconnet", Pkt_size=False)
# reconnect from vhost
self.logger.info('now reconnet from vhost')
self.relanuch_vhost_testpmd_with_multi_queue()
- self.start_to_send_packets(self.virtio_user, self.vhost)
- self.calculate_avg_throughput(case_info, "reconnet from vhost")
+ self.start_to_send_8k_packets(self.virtio_user, self.vhost)
+ self.calculate_avg_throughput(case_info, "reconnet from vhost", Pkt_size=False)
# reconnet from virtio
self.logger.info('now reconnet from virtio_user')
self.relanuch_virtio_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "reconnet from virtio user")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "reconnet from virtio user", Pkt_size=False)
# port restart
self.logger.info('now vhost port restart')
- self.port_restart()
- self.calculate_avg_throughput(case_info, "after port restart")
+ self.port_restart_send_8k_packets()
+ self.calculate_avg_throughput(case_info, "after port restart", Pkt_size=False)
self.result_table_print()
self.check_packets_of_each_queue()
@@ -384,11 +496,11 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_inorder_non_mergeable_path(self):
"""
- reconnect test with virtio 1.1 inorder non_mergeable path and server mode
+ Test Case 11: reconnect test with virtio 1.1 inorder non_mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
- case_info = 'virtio1.1 non_mergeable path'
+ case_info = 'virtio1.1 inorder non_mergeable path'
mode = "packed_vq=1,in_order=1,mrg_rxbuf=0,vectorized=1"
extern_params = '--rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
@@ -419,11 +531,11 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_inorder_vectorized_path(self):
"""
- reconnect test with virtio 1.1 inorder non_mergeable path and server mode
+ Test Case 12: reconnect test with virtio 1.1 inorder vectorized path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
- case_info = 'virtio1.1 non_mergeable path'
+ case_info = 'virtio1.1 inorder vectorized path'
mode = "packed_vq=1,in_order=1,mrg_rxbuf=0,vectorized=1"
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
@@ -454,7 +566,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_inorder_mergeable_path(self):
"""
- reconnect test with virtio 1.0 inorder mergeable path and server mode
+ Test Case 4: reconnect test with virtio 1.0 inorder mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -463,25 +575,25 @@ class TestLoopbackVirtioUserServerMode(TestCase):
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "before reconnet")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "before reconnet", Pkt_size=False)
# reconnet from vhost
self.logger.info('now reconnet from vhost')
self.relanuch_vhost_testpmd_with_multi_queue()
- self.start_to_send_packets(self.virtio_user, self.vhost)
- self.calculate_avg_throughput(case_info, "reconnet from vhost")
+ self.start_to_send_8k_packets(self.virtio_user, self.vhost)
+ self.calculate_avg_throughput(case_info, "reconnet from vhost", Pkt_size=False)
# reconnet from virtio
self.logger.info('now reconnet from virtio_user')
self.relanuch_virtio_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "reconnet from virtio_user")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "reconnet from virtio_user", Pkt_size=False)
# port restart
self.logger.info('now vhost port restart')
- self.port_restart()
- self.calculate_avg_throughput(case_info, "after port restart")
+ self.port_restart_send_8k_packets()
+ self.calculate_avg_throughput(case_info, "after port restart", Pkt_size=False)
self.result_table_print()
self.check_packets_of_each_queue()
@@ -489,7 +601,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_inorder_non_mergeable_path(self):
"""
- reconnect test with virtio 1.0 inorder non_mergeable path and server mode
+ Test Case 5: reconnect test with virtio 1.0 inorder non_mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -524,34 +636,34 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_mergeable_path(self):
"""
- reconnect test with virtio 1.0 mergeable path and server mode
+ Test Case 3: reconnect test with virtio 1.0 mergeable path and server mode
"""
- self.queue_number = 2
+ self.queue_number = 8
self.nb_cores = 2
case_info = 'virtio1.0 mergeable path'
mode = "in_order=0,mrg_rxbuf=1"
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "before reconnet")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "before reconnet", Pkt_size=False)
# reconnet from vhost
self.logger.info('now reconnet from vhost')
self.relanuch_vhost_testpmd_with_multi_queue()
- self.start_to_send_packets(self.virtio_user, self.vhost)
- self.calculate_avg_throughput(case_info, "reconnet from vhost")
+ self.start_to_send_8k_packets(self.virtio_user, self.vhost)
+ self.calculate_avg_throughput(case_info, "reconnet from vhost", Pkt_size=False)
# reconnet from virtio
self.logger.info('now reconnet from virtio_user')
self.relanuch_virtio_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "reconnet from virtio_user")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "reconnet from virtio_user", Pkt_size=False)
# port restart
self.logger.info('now vhost port restart')
- self.port_restart()
- self.calculate_avg_throughput(case_info, "after port restart")
+ self.port_restart_send_8k_packets()
+ self.calculate_avg_throughput(case_info, "after port restart", Pkt_size=False)
self.result_table_print()
self.check_packets_of_each_queue()
@@ -559,7 +671,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_non_mergeable_path(self):
"""
- reconnect test with virtio 1.0 non_mergeable path and server mode
+ Test Case 6: reconnect test with virtio 1.0 non_mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -594,7 +706,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_vector_rx_path(self):
"""
- reconnect test with virtio 1.0 vector_rx path and server mode
+ Test Case 7: reconnect test with virtio 1.0 vector_rx path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -626,12 +738,137 @@ class TestLoopbackVirtioUserServerMode(TestCase):
self.check_packets_of_each_queue()
self.close_all_testpmd()
+ def test_server_mode_reconnect_with_packed_and_split_mergeable_path_payload_check(self):
+ """
+ Test Case 13: loopback packed ring and split ring mergeable path payload check test using server mode and multi-queues
+ """
+ self.queue_number = 8
+ self.nb_cores = 1
+ extern_params = '--txd=1024 --rxd=1024'
+ case_info = 'packed ring mergeable inorder path'
+ mode = "mrg_rxbuf=1,in_order=1,packed_vq=1"
+
+ self.lanuch_vhost_testpmd_with_multi_queue(extern_params=extern_params, set_fwd_mac=False)
+ self.logger.info(case_info)
+ self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params, set_fwd_mac=False)
+ self.virtio_user_pmd.execute_cmd("set fwd csum")
+ self.virtio_user_pmd.execute_cmd("start")
+ #3. Attach pdump secondary process to primary process by same file-prefix
+ self.vuser0_port = 'net_virtio_user0'
+ self.launch_pdump_to_capture_pkt(self.vuser0_port)
+ self.start_to_send_8k_packets_csum(self.vhost)
+
+ #5. Check all the packets length is 8000 Byte in the pcap file
+ self.pkt_len = 8000
+ self.check_packet_payload_valid(self.pkt_len)
+
+ # reconnet from vhost
+ self.relanuch_vhost_testpmd_send_8k_packets(extern_params)
+
+ # reconnet from virtio
+ self.logger.info('now reconnet from virtio_user with other path')
+ case_info = 'packed ring mergeable path'
+ mode = "mrg_rxbuf=1,in_order=0,packed_vq=1"
+ self.relanuch_virtio_testpmd_with_multi_path(mode, case_info, extern_params)
+
+ case_info = 'split ring mergeable inorder path'
+ mode = "mrg_rxbuf=1,in_order=1"
+ self.relanuch_virtio_testpmd_with_multi_path(mode, case_info, extern_params)
+
+ case_info = 'split ring mergeable path'
+ mode = "mrg_rxbuf=1,in_order=0"
+ self.relanuch_virtio_testpmd_with_multi_path(mode, case_info, extern_params)
+
+ self.close_all_testpmd()
+
+ def test_server_mode_reconnect_with_packed_and_split_mergeable_path_cbdma_payload_check(self):
+ """
+ Test Case 14: loopback packed ring and split ring mergeable path cbdma test payload check with server mode and multi-queues
+ """
+ self.cbdma_nic_dev_num = 8
+ self.get_cbdma_ports_info_and_bind_to_dpdk()
+ self.queue_number = 8
+ self.vdev = f"--vdev 'eth_vhost0,iface=vhost-net,queues={self.queue_number},client=1,dmas=[txq0@{self.cbdma_dev_infos[0]};txq1@{self.cbdma_dev_infos[1]};txq2@{self.cbdma_dev_infos[2]};txq3@{self.cbdma_dev_infos[3]};txq4@{self.cbdma_dev_infos[4]};txq5@{self.cbdma_dev_infos[5]};txq6@{self.cbdma_dev_infos[6]};txq7@{self.cbdma_dev_infos[7]}]' "
+
+ self.nb_cores = 1
+ extern_params = '--txd=1024 --rxd=1024'
+ case_info = 'packed ring mergeable inorder path'
+ mode = "mrg_rxbuf=1,in_order=1,packed_vq=1"
+
+ self.lanuch_vhost_testpmd_with_cbdma(extern_params=extern_params)
+ self.logger.info(case_info)
+ self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params, set_fwd_mac=False)
+ self.virtio_user_pmd.execute_cmd("set fwd csum")
+ self.virtio_user_pmd.execute_cmd("start")
+ # 3. Attach pdump secondary process to primary process by same file-prefix
+ self.vuser0_port = 'net_virtio_user0'
+ self.launch_pdump_to_capture_pkt(self.vuser0_port)
+ self.start_to_send_8k_packets_csum_cbdma(self.vhost)
+
+ # 5. Check all the packets length is 6192 Byte in the pcap file
+ self.pkt_len = 6192
+ self.check_packet_payload_valid(self.pkt_len)
+ #reconnet from vhost
+ self.relanuch_vhost_testpmd_send_8k_packets(extern_params, cbdma=True)
+
+ # reconnet from virtio
+ self.logger.info('now reconnet from virtio_user with other path')
+ case_info = 'packed ring mergeable path'
+ mode = "mrg_rxbuf=1,in_order=0,packed_vq=1"
+ self.relanuch_virtio_testpmd_with_multi_path(mode, case_info, extern_params, cbdma=True)
+
+ case_info = 'split ring mergeable inorder path'
+ mode = "mrg_rxbuf=1,in_order=1"
+ self.relanuch_virtio_testpmd_with_multi_path(mode, case_info, extern_params, cbdma=True)
+
+ case_info = 'split ring mergeable path'
+ mode = "mrg_rxbuf=1,in_order=0"
+ self.relanuch_virtio_testpmd_with_multi_path(mode, case_info, extern_params, cbdma=True)
+
+ self.close_all_testpmd()
+
+ def lanuch_vhost_testpmd_with_cbdma(self, extern_params=""):
+ """
+ start testpmd with cbdma
+ """
+ param = "--rxq={} --txq={} --nb-cores={} {}".format(self.queue_number, self.queue_number, self.nb_cores, extern_params)
+ self.vhost_pmd.start_testpmd(self.core_list_host, param=param, no_pci=False, ports=[], eal_param=self.vdev, prefix='vhost', fixed_prefix=True)
+
+ def get_cbdma_ports_info_and_bind_to_dpdk(self):
+ """
+ get all cbdma ports
+ """
+ out = self.dut.send_expect('./usertools/dpdk-devbind.py --status-dev dma', '# ', 30)
+ device_info = out.split('\n')
+ for device in device_info:
+ pci_info = re.search('\s*(0000:\S*:\d*.\d*)', device)
+ if pci_info is not None:
+ dev_info = pci_info.group(1)
+ # the numa id of ioat dev, only add the device which on same socket with nic dev
+ bus = int(dev_info[5:7], base=16)
+ if bus >= 128:
+ cur_socket = 1
+ else:
+ cur_socket = 0
+ if self.ports_socket == cur_socket:
+ self.cbdma_dev_infos.append(pci_info.group(1))
+ self.verify(len(self.cbdma_dev_infos) >= 8, 'There no enough cbdma device to run this suite')
+ self.device_str = ' '.join(self.cbdma_dev_infos[0:self.cbdma_nic_dev_num])
+ self.dut.send_expect('./usertools/dpdk-devbind.py --force --bind=%s %s' % (self.drivername, self.device_str), '# ', 60)
+
+ def bind_cbdma_device_to_kernel(self):
+ if self.device_str is not None:
+ self.dut.send_expect('modprobe ioatdma', '# ')
+ self.dut.send_expect('./usertools/dpdk-devbind.py -u %s' % self.device_str, '# ', 30)
+ self.dut.send_expect('./usertools/dpdk-devbind.py --force --bind=ioatdma %s' % self.device_str, '# ', 60)
+
def tear_down(self):
"""
Run after each test case.
"""
self.dut.send_expect("killall -s INT %s" % self.testpmd_name, "#")
self.close_all_session()
+ self.bind_cbdma_device_to_kernel()
time.sleep(2)
def tear_down_all(self):
--
2.33.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: add two new cases
2021-11-05 14:38 ` Tu, Lijuan
@ 2021-11-08 6:31 ` Chen, LingliX
2021-11-09 9:14 ` Tu, Lijuan
0 siblings, 1 reply; 11+ messages in thread
From: Chen, LingliX @ 2021-11-08 6:31 UTC (permalink / raw)
To: Tu, Lijuan, dts; +Cc: Wang, Yinan
> -----Original Message-----
> From: Tu, Lijuan <lijuan.tu@intel.com>
> Sent: Friday, November 5, 2021 10:39 PM
> To: Chen, LingliX <linglix.chen@intel.com>; dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Chen, LingliX
> <linglix.chen@intel.com>
> Subject: RE: [dts] [PATCH V1 1/2]
> test_plans/loopback_virtio_user_server_mode: add two new cases
>
> > -----Original Message-----
> > From: dts <dts-bounces@dpdk.org> On Behalf Of Lingli Chen
> > Sent: 2021年11月5日 23:07
> > To: dts@dpdk.org
> > Cc: Wang, Yinan <yinan.wang@intel.com>; Chen, LingliX
> > <linglix.chen@intel.com>
> > Subject: [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode:
> > add two new cases
> >
> > 1. Case 3, Case 10 change to 8 queues.
> > 2. Case 4, Case 8 add 8k packets.
> > 3. Add 2 new cases: case 13, 14.
>
> Could you please explain why do these changes ?
These changes for case coverage improvement.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: add two new cases
2021-11-08 6:31 ` Chen, LingliX
@ 2021-11-09 9:14 ` Tu, Lijuan
0 siblings, 0 replies; 11+ messages in thread
From: Tu, Lijuan @ 2021-11-09 9:14 UTC (permalink / raw)
To: Chen, LingliX, dts; +Cc: Wang, Yinan
> -----Original Message-----
> From: Chen, LingliX <linglix.chen@intel.com>
> Sent: 2021年11月8日 14:31
> To: Tu, Lijuan <lijuan.tu@intel.com>; dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: RE: [dts] [PATCH V1 1/2]
> test_plans/loopback_virtio_user_server_mode: add two new cases
>
>
> > -----Original Message-----
> > From: Tu, Lijuan <lijuan.tu@intel.com>
> > Sent: Friday, November 5, 2021 10:39 PM
> > To: Chen, LingliX <linglix.chen@intel.com>; dts@dpdk.org
> > Cc: Wang, Yinan <yinan.wang@intel.com>; Chen, LingliX
> > <linglix.chen@intel.com>
> > Subject: RE: [dts] [PATCH V1 1/2]
> > test_plans/loopback_virtio_user_server_mode: add two new cases
> >
> > > -----Original Message-----
> > > From: dts <dts-bounces@dpdk.org> On Behalf Of Lingli Chen
> > > Sent: 2021年11月5日 23:07
> > > To: dts@dpdk.org
> > > Cc: Wang, Yinan <yinan.wang@intel.com>; Chen, LingliX
> > > <linglix.chen@intel.com>
> > > Subject: [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode:
> > > add two new cases
> > >
> > > 1. Case 3, Case 10 change to 8 queues.
> > > 2. Case 4, Case 8 add 8k packets.
> > > 3. Add 2 new cases: case 13, 14.
> >
> > Could you please explain why do these changes ?
>
> These changes for case coverage improvement.
Please split new cases to another patch, they are for different purpose.
^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [dts][PATCH V1 2/2] tests/loopback_virtio_user_server_mode: add two new cases
2021-11-05 15:07 ` [dts] [PATCH V1 2/2] tests/loopback_virtio_user_server_mode: " Lingli Chen
2021-11-05 7:17 ` Chen, LingliX
@ 2021-11-22 8:32 ` Wang, Yinan
1 sibling, 0 replies; 11+ messages in thread
From: Wang, Yinan @ 2021-11-22 8:32 UTC (permalink / raw)
To: Chen, LingliX, dts
Acked-by: Yinan Wang <yinan.wang@intel.com>
> -----Original Message-----
> From: Chen, LingliX <linglix.chen@intel.com>
> Sent: 2021?11?5? 23:07
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Chen, LingliX
> <linglix.chen@intel.com>
> Subject: [dts][PATCH V1 2/2] tests/loopback_virtio_user_server_mode: add
> two new cases
>
> 1. Add 2 new cases: case 13, 14.
> 2. Modify case 3, 4, 8, 10 sync with testplan.
>
> Signed-off-by: Lingli Chen <linglix.chen@intel.com>
> ---
> ...tSuite_loopback_virtio_user_server_mode.py | 353 +++++++++++++++---
> 1 file changed, 295 insertions(+), 58 deletions(-)
>
> diff --git a/tests/TestSuite_loopback_virtio_user_server_mode.py
> b/tests/TestSuite_loopback_virtio_user_server_mode.py
> index 7fbfe804..119b178f 100644
> --- a/tests/TestSuite_loopback_virtio_user_server_mode.py
> +++ b/tests/TestSuite_loopback_virtio_user_server_mode.py
> @@ -37,11 +37,10 @@ Test loopback virtio-user server mode
> """
> import re
> import time
> -
> import framework.utils as utils
> from framework.pmd_output import PmdOutput
> from framework.test_case import TestCase
> -
> +from framework.packet import Packet
>
> class TestLoopbackVirtioUserServerMode(TestCase):
>
> @@ -61,6 +60,12 @@ class TestLoopbackVirtioUserServerMode(TestCase):
> self.core_list_host = self.core_list[3:6]
> self.path=self.dut.apps_name['test-pmd']
> self.testpmd_name = self.path.split("/")[-1]
> + self.app_pdump = self.dut.apps_name['pdump']
> + self.dump_pcap = "/root/pdump-rx.pcap"
> + self.device_str = ''
> + self.dut_ports = self.dut.get_ports()
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + self.cbdma_dev_infos = []
>
> def set_up(self):
> """
> @@ -108,13 +113,17 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
> if set_fwd_mac:
> self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
>
> - def lanuch_vhost_testpmd_with_multi_queue(self, extern_params=""):
> + def lanuch_vhost_testpmd_with_multi_queue(self, extern_params="",
> set_fwd_mac=True):
> """
> start testpmd with multi qeueue
> """
> - self.lanuch_vhost_testpmd(self.queue_number, self.nb_cores,
> extern_params=extern_params)
> + eal_params = "--vdev 'eth_vhost0,iface=vhost-
> net,client=1,queues={}'".format(self.queue_number)
> + param = "--rxq={} --txq={} --nb-cores={} {}".format(self.queue_number,
> self.queue_number, self.nb_cores, extern_params)
> + self.vhost_pmd.start_testpmd(self.core_list_host, param=param,
> no_pci=True, ports=[], eal_param=eal_params, prefix='vhost',
> fixed_prefix=True)
> + if set_fwd_mac:
> + self.vhost_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
>
> - def lanuch_virtio_user_testpmd_with_multi_queue(self, mode,
> extern_params=""):
> + def lanuch_virtio_user_testpmd_with_multi_queue(self, mode,
> extern_params="", set_fwd_mac=True):
> """
> start testpmd of vhost user
> """
> @@ -126,7 +135,8 @@ class TestLoopbackVirtioUserServerMode(TestCase):
> param = "{} --nb-cores={} --rxq={} --txq={}".format(extern_params,
> self.nb_cores, self.queue_number, self.queue_number)
> self.virtio_user_pmd.start_testpmd(cores=self.core_list_user,
> param=param, eal_param=eal_param, \
> no_pci=True, ports=[], prefix="virtio", fixed_prefix=True)
> - self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
> + if set_fwd_mac:
> + self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
>
> def start_to_send_packets(self, session_rx, session_tx):
> """
> @@ -136,6 +146,35 @@ class TestLoopbackVirtioUserServerMode(TestCase):
> session_rx.send_command("start", 3)
> session_tx.send_expect("start tx_first 32", "testpmd> ", 30)
>
> + def start_to_send_8k_packets(self, session_rx, session_tx):
> + """
> + start the testpmd of vhost-user and virtio-user
> + start to send 8k packets
> + """
> + session_rx.send_command("start", 3)
> + session_tx.send_expect("set txpkts 2000,2000,2000,2000", "testpmd>
> ", 30)
> + session_tx.send_expect("start tx_first 32", "testpmd> ", 30)
> +
> + def start_to_send_8k_packets_csum(self, session_tx):
> + """
> + start the testpmd of vhost-user, start to send 8k packets
> + """
> + session_tx.send_expect("set fwd csum", "testpmd> ", 30)
> + session_tx.send_expect("set txpkts 2000,2000,2000,2000", "testpmd>
> ", 30)
> + session_tx.send_expect("set burst 1", "testpmd> ", 30)
> + session_tx.send_expect("start tx_first 1", "testpmd> ", 10)
> + session_tx.send_expect("stop", "testpmd> ", 30)
> +
> + def start_to_send_8k_packets_csum_cbdma(self, session_tx):
> + """
> + start the testpmd of vhost-user, start to send 8k packets
> + """
> + session_tx.send_expect("vhost enable tx all", "testpmd> ", 30)
> + session_tx.send_expect("set fwd csum", "testpmd> ", 30)
> + session_tx.send_expect("set txpkts 64,64,64,2000,2000,2000",
> "testpmd> ", 30)
> + session_tx.send_expect("start tx_first 32", "testpmd> ", 5)
> + session_tx.send_expect("stop", "testpmd> ", 30)
> +
> def check_port_throughput_after_port_stop(self):
> """
> check the throughput after port stop
> @@ -182,6 +221,74 @@ class TestLoopbackVirtioUserServerMode(TestCase):
> self.check_port_link_status_after_port_restart()
> self.vhost_pmd.execute_cmd("start tx_first 32", "testpmd> ", 120)
>
> + def port_restart_send_8k_packets(self):
> + self.vhost_pmd.execute_cmd("stop", "testpmd> ", 120)
> + self.vhost_pmd.execute_cmd("port stop 0", "testpmd> ", 120)
> + self.check_port_throughput_after_port_stop()
> + self.vhost_pmd.execute_cmd("clear port stats all", "testpmd> ", 120)
> + self.vhost_pmd.execute_cmd("port start 0", "testpmd> ", 120)
> + self.check_port_link_status_after_port_restart()
> + self.vhost_pmd.execute_cmd("set txpkts 2000,2000,2000,2000",
> "testpmd> ", 120)
> + self.vhost_pmd.execute_cmd("start tx_first 32", "testpmd> ", 120)
> +
> + def launch_pdump_to_capture_pkt(self, dump_port):
> + """
> + bootup pdump in dut
> + """
> + self.pdump_session = self.dut.new_session(suite="pdump")
> + cmd = self.app_pdump + " " + \
> + "-v --file-prefix=virtio -- " + \
> + "--pdump 'device_id=%s,queue=*,rx-dev=%s,mbuf-size=8000'"
> + self.pdump_session.send_expect(cmd % (dump_port,
> self.dump_pcap), 'Port')
> +
> + def check_packet_payload_valid(self, pkt_len):
> + """
> + check the payload is valid
> + """
> + self.pdump_session.send_expect('^c', '# ', 60)
> + time.sleep(3)
> + self.dut.session.copy_file_from(src="%s" % self.dump_pcap, dst="%s" %
> self.dump_pcap)
> + pkt = Packet()
> + pkts = pkt.read_pcapfile(self.dump_pcap)
> + data = str(pkts[0]['Raw'])
> +
> + for i in range(len(pkts)):
> + self.verify(len(pkts[i]) == pkt_len, "virtio-user0 receive packet's
> length not equal %s Byte" %pkt_len)
> + value = str(pkts[i]['Raw'])
> + self.verify(data == value, "the payload in receive packets has been
> changed from %s" %i)
> + self.dut.send_expect("rm -rf %s" % self.dump_pcap, "#")
> +
> + def relanuch_vhost_testpmd_send_8k_packets(self, extern_params,
> cbdma=False):
> +
> + self.vhost_pmd.execute_cmd("quit", "#", 60)
> + self.logger.info('now reconnet from vhost')
> + if cbdma:
> +
> self.lanuch_vhost_testpmd_with_cbdma(extern_params=extern_params)
> + else:
> +
> self.lanuch_vhost_testpmd_with_multi_queue(extern_params=extern_para
> ms, set_fwd_mac=False)
> + self.launch_pdump_to_capture_pkt(self.vuser0_port)
> + if cbdma:
> + self.start_to_send_8k_packets_csum_cbdma(self.vhost)
> + else:
> + self.start_to_send_8k_packets_csum(self.vhost)
> + self.check_packet_payload_valid(self.pkt_len)
> +
> + def relanuch_virtio_testpmd_with_multi_path(self, mode, case_info,
> extern_params, cbdma=False):
> +
> + self.virtio_user_pmd.execute_cmd("quit", "#", 60)
> + self.logger.info(case_info)
> + self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params, set_fwd_mac=False)
> + self.virtio_user_pmd.execute_cmd("set fwd csum")
> + self.virtio_user_pmd.execute_cmd("start")
> + self.launch_pdump_to_capture_pkt(self.vuser0_port)
> + if cbdma:
> + self.start_to_send_8k_packets_csum_cbdma(self.vhost)
> + else:
> + self.start_to_send_8k_packets_csum(self.vhost)
> + self.check_packet_payload_valid(self.pkt_len)
> +
> + self.relanuch_vhost_testpmd_send_8k_packets(extern_params,
> cbdma)
> +
> def relanuch_vhost_testpmd_with_multi_queue(self):
> self.vhost_pmd.execute_cmd("quit", "#", 60)
> self.check_link_status(self.virtio_user, "down")
> @@ -192,7 +299,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
> self.check_link_status(self.vhost, "down")
> self.lanuch_virtio_user_testpmd_with_multi_queue(mode,
> extern_params)
>
> - def calculate_avg_throughput(self, case_info, cycle):
> + def calculate_avg_throughput(self, case_info, cycle, Pkt_size=True):
> """
> calculate the average throughput
> """
> @@ -206,14 +313,19 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
> result = lines.group(1)
> results += float(result)
> Mpps = results / (1000000 * 10)
> - self.verify(Mpps > 5, "port can not receive packets")
> -
> results_row.append(case_info)
> - results_row.append('64')
> + if Pkt_size:
> + self.verify(Mpps > 5, "port can not receive packets")
> + results_row.append('64')
> + else:
> + self.verify(Mpps > 1, "port can not receive packets")
> + results_row.append('8k')
> +
> results_row.append(Mpps)
> results_row.append(self.queue_number)
> results_row.append(cycle)
> self.result_table_add(results_row)
> + self.logger.info(results_row)
>
> def check_packets_of_each_queue(self):
> """
> @@ -247,7 +359,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
>
> def test_server_mode_launch_virtio_first(self):
> """
> - basic test for virtio-user server mode, launch virtio-user first
> + Test Case 2: basic test for split ring server mode, launch virtio-user
> first
> """
> self.queue_number = 1
> self.nb_cores = 1
> @@ -263,7 +375,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
>
> def test_server_mode_launch_virtio11_first(self):
> """
> - basic test for virtio-user server mode, launch virtio-user first
> + Test Case 1: basic test for packed ring server mode, launch virtio-user
> first
> """
> self.queue_number = 1
> self.nb_cores = 1
> @@ -279,7 +391,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
>
> def test_server_mode_reconnect_with_virtio11_mergeable_path(self):
> """
> - reconnect test with virtio 1.1 mergeable path and server mode
> + Test Case 8: reconnect test with virtio 1.1 mergeable path and server
> mode
> """
> self.queue_number = 2
> self.nb_cores = 2
> @@ -288,25 +400,25 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
> extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
> self.lanuch_vhost_testpmd_with_multi_queue()
> self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params)
> - self.start_to_send_packets(self.vhost, self.virtio_user)
> - self.calculate_avg_throughput(case_info, "before reconnet")
> + self.start_to_send_8k_packets(self.vhost, self.virtio_user)
> + self.calculate_avg_throughput(case_info, "before reconnet",
> Pkt_size=False)
>
> # reconnect from vhost
> self.logger.info('now reconnet from vhost')
> self.relanuch_vhost_testpmd_with_multi_queue()
> - self.start_to_send_packets(self.virtio_user, self.vhost)
> - self.calculate_avg_throughput(case_info, "reconnet from vhost")
> + self.start_to_send_8k_packets(self.virtio_user, self.vhost)
> + self.calculate_avg_throughput(case_info, "reconnet from vhost",
> Pkt_size=False)
>
> # reconnet from virtio
> self.logger.info('now reconnet from virtio_user')
> self.relanuch_virtio_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params)
> - self.start_to_send_packets(self.vhost, self.virtio_user)
> - self.calculate_avg_throughput(case_info, "reconnet from virtio user")
> + self.start_to_send_8k_packets(self.vhost, self.virtio_user)
> + self.calculate_avg_throughput(case_info, "reconnet from virtio user",
> Pkt_size=False)
>
> # port restart
> self.logger.info('now vhost port restart')
> - self.port_restart()
> - self.calculate_avg_throughput(case_info, "after port restart")
> + self.port_restart_send_8k_packets()
> + self.calculate_avg_throughput(case_info, "after port restart",
> Pkt_size=False)
>
> self.result_table_print()
> self.check_packets_of_each_queue()
> @@ -314,7 +426,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
>
> def
> test_server_mode_reconnect_with_virtio11_non_mergeable_path(self):
> """
> - reconnect test with virtio 1.1 non_mergeable path and server mode
> + Test Case 9: reconnect test with virtio 1.1 non_mergeable path and
> server mode
> """
> self.queue_number = 2
> self.nb_cores = 2
> @@ -349,34 +461,34 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
>
> def
> test_server_mode_reconnect_with_virtio11_inorder_mergeable_path(self):
> """
> - reconnect test with virtio 1.1 inorder mergeable path and server mode
> + Test Case 10: reconnect test with virtio 1.1 inorder mergeable path
> and server mode
> """
> - self.queue_number = 2
> + self.queue_number = 8
> self.nb_cores = 2
> case_info = 'virtio1.1 inorder mergeable path'
> mode = "packed_vq=1,in_order=1,mrg_rxbuf=1"
> extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
> self.lanuch_vhost_testpmd_with_multi_queue()
> self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params)
> - self.start_to_send_packets(self.vhost, self.virtio_user)
> - self.calculate_avg_throughput(case_info, "before reconnet")
> + self.start_to_send_8k_packets(self.vhost, self.virtio_user)
> + self.calculate_avg_throughput(case_info, "before reconnet",
> Pkt_size=False)
>
> # reconnect from vhost
> self.logger.info('now reconnet from vhost')
> self.relanuch_vhost_testpmd_with_multi_queue()
> - self.start_to_send_packets(self.virtio_user, self.vhost)
> - self.calculate_avg_throughput(case_info, "reconnet from vhost")
> + self.start_to_send_8k_packets(self.virtio_user, self.vhost)
> + self.calculate_avg_throughput(case_info, "reconnet from vhost",
> Pkt_size=False)
>
> # reconnet from virtio
> self.logger.info('now reconnet from virtio_user')
> self.relanuch_virtio_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params)
> - self.start_to_send_packets(self.vhost, self.virtio_user)
> - self.calculate_avg_throughput(case_info, "reconnet from virtio user")
> + self.start_to_send_8k_packets(self.vhost, self.virtio_user)
> + self.calculate_avg_throughput(case_info, "reconnet from virtio user",
> Pkt_size=False)
>
> # port restart
> self.logger.info('now vhost port restart')
> - self.port_restart()
> - self.calculate_avg_throughput(case_info, "after port restart")
> + self.port_restart_send_8k_packets()
> + self.calculate_avg_throughput(case_info, "after port restart",
> Pkt_size=False)
>
> self.result_table_print()
> self.check_packets_of_each_queue()
> @@ -384,11 +496,11 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
>
> def
> test_server_mode_reconnect_with_virtio11_inorder_non_mergeable_path(
> self):
> """
> - reconnect test with virtio 1.1 inorder non_mergeable path and server
> mode
> + Test Case 11: reconnect test with virtio 1.1 inorder non_mergeable
> path and server mode
> """
> self.queue_number = 2
> self.nb_cores = 2
> - case_info = 'virtio1.1 non_mergeable path'
> + case_info = 'virtio1.1 inorder non_mergeable path'
> mode = "packed_vq=1,in_order=1,mrg_rxbuf=0,vectorized=1"
> extern_params = '--rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip'
> self.lanuch_vhost_testpmd_with_multi_queue()
> @@ -419,11 +531,11 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
>
> def
> test_server_mode_reconnect_with_virtio11_inorder_vectorized_path(self):
> """
> - reconnect test with virtio 1.1 inorder non_mergeable path and server
> mode
> + Test Case 12: reconnect test with virtio 1.1 inorder vectorized path
> and server mode
> """
> self.queue_number = 2
> self.nb_cores = 2
> - case_info = 'virtio1.1 non_mergeable path'
> + case_info = 'virtio1.1 inorder vectorized path'
> mode = "packed_vq=1,in_order=1,mrg_rxbuf=0,vectorized=1"
> extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
> self.lanuch_vhost_testpmd_with_multi_queue()
> @@ -454,7 +566,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
>
> def
> test_server_mode_reconnect_with_virtio10_inorder_mergeable_path(self):
> """
> - reconnect test with virtio 1.0 inorder mergeable path and server mode
> + Test Case 4: reconnect test with virtio 1.0 inorder mergeable path and
> server mode
> """
> self.queue_number = 2
> self.nb_cores = 2
> @@ -463,25 +575,25 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
> extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
> self.lanuch_vhost_testpmd_with_multi_queue()
> self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params)
> - self.start_to_send_packets(self.vhost, self.virtio_user)
> - self.calculate_avg_throughput(case_info, "before reconnet")
> + self.start_to_send_8k_packets(self.vhost, self.virtio_user)
> + self.calculate_avg_throughput(case_info, "before reconnet",
> Pkt_size=False)
>
> # reconnet from vhost
> self.logger.info('now reconnet from vhost')
> self.relanuch_vhost_testpmd_with_multi_queue()
> - self.start_to_send_packets(self.virtio_user, self.vhost)
> - self.calculate_avg_throughput(case_info, "reconnet from vhost")
> + self.start_to_send_8k_packets(self.virtio_user, self.vhost)
> + self.calculate_avg_throughput(case_info, "reconnet from vhost",
> Pkt_size=False)
>
> # reconnet from virtio
> self.logger.info('now reconnet from virtio_user')
> self.relanuch_virtio_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params)
> - self.start_to_send_packets(self.vhost, self.virtio_user)
> - self.calculate_avg_throughput(case_info, "reconnet from virtio_user")
> + self.start_to_send_8k_packets(self.vhost, self.virtio_user)
> + self.calculate_avg_throughput(case_info, "reconnet from virtio_user",
> Pkt_size=False)
>
> # port restart
> self.logger.info('now vhost port restart')
> - self.port_restart()
> - self.calculate_avg_throughput(case_info, "after port restart")
> + self.port_restart_send_8k_packets()
> + self.calculate_avg_throughput(case_info, "after port restart",
> Pkt_size=False)
>
> self.result_table_print()
> self.check_packets_of_each_queue()
> @@ -489,7 +601,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
>
> def
> test_server_mode_reconnect_with_virtio10_inorder_non_mergeable_path(
> self):
> """
> - reconnect test with virtio 1.0 inorder non_mergeable path and server
> mode
> + Test Case 5: reconnect test with virtio 1.0 inorder non_mergeable
> path and server mode
> """
> self.queue_number = 2
> self.nb_cores = 2
> @@ -524,34 +636,34 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
>
> def test_server_mode_reconnect_with_virtio10_mergeable_path(self):
> """
> - reconnect test with virtio 1.0 mergeable path and server mode
> + Test Case 3: reconnect test with virtio 1.0 mergeable path and server
> mode
> """
> - self.queue_number = 2
> + self.queue_number = 8
> self.nb_cores = 2
> case_info = 'virtio1.0 mergeable path'
> mode = "in_order=0,mrg_rxbuf=1"
> extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
> self.lanuch_vhost_testpmd_with_multi_queue()
> self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params)
> - self.start_to_send_packets(self.vhost, self.virtio_user)
> - self.calculate_avg_throughput(case_info, "before reconnet")
> + self.start_to_send_8k_packets(self.vhost, self.virtio_user)
> + self.calculate_avg_throughput(case_info, "before reconnet",
> Pkt_size=False)
>
> # reconnet from vhost
> self.logger.info('now reconnet from vhost')
> self.relanuch_vhost_testpmd_with_multi_queue()
> - self.start_to_send_packets(self.virtio_user, self.vhost)
> - self.calculate_avg_throughput(case_info, "reconnet from vhost")
> + self.start_to_send_8k_packets(self.virtio_user, self.vhost)
> + self.calculate_avg_throughput(case_info, "reconnet from vhost",
> Pkt_size=False)
>
> # reconnet from virtio
> self.logger.info('now reconnet from virtio_user')
> self.relanuch_virtio_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params)
> - self.start_to_send_packets(self.vhost, self.virtio_user)
> - self.calculate_avg_throughput(case_info, "reconnet from virtio_user")
> + self.start_to_send_8k_packets(self.vhost, self.virtio_user)
> + self.calculate_avg_throughput(case_info, "reconnet from virtio_user",
> Pkt_size=False)
>
> # port restart
> self.logger.info('now vhost port restart')
> - self.port_restart()
> - self.calculate_avg_throughput(case_info, "after port restart")
> + self.port_restart_send_8k_packets()
> + self.calculate_avg_throughput(case_info, "after port restart",
> Pkt_size=False)
>
> self.result_table_print()
> self.check_packets_of_each_queue()
> @@ -559,7 +671,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
>
> def
> test_server_mode_reconnect_with_virtio10_non_mergeable_path(self):
> """
> - reconnect test with virtio 1.0 non_mergeable path and server mode
> + Test Case 6: reconnect test with virtio 1.0 non_mergeable path and
> server mode
> """
> self.queue_number = 2
> self.nb_cores = 2
> @@ -594,7 +706,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
>
> def test_server_mode_reconnect_with_virtio10_vector_rx_path(self):
> """
> - reconnect test with virtio 1.0 vector_rx path and server mode
> + Test Case 7: reconnect test with virtio 1.0 vector_rx path and server
> mode
> """
> self.queue_number = 2
> self.nb_cores = 2
> @@ -626,12 +738,137 @@ class
> TestLoopbackVirtioUserServerMode(TestCase):
> self.check_packets_of_each_queue()
> self.close_all_testpmd()
>
> + def
> test_server_mode_reconnect_with_packed_and_split_mergeable_path_pay
> load_check(self):
> + """
> + Test Case 13: loopback packed ring and split ring mergeable path
> payload check test using server mode and multi-queues
> + """
> + self.queue_number = 8
> + self.nb_cores = 1
> + extern_params = '--txd=1024 --rxd=1024'
> + case_info = 'packed ring mergeable inorder path'
> + mode = "mrg_rxbuf=1,in_order=1,packed_vq=1"
> +
> +
> self.lanuch_vhost_testpmd_with_multi_queue(extern_params=extern_para
> ms, set_fwd_mac=False)
> + self.logger.info(case_info)
> + self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params, set_fwd_mac=False)
> + self.virtio_user_pmd.execute_cmd("set fwd csum")
> + self.virtio_user_pmd.execute_cmd("start")
> + #3. Attach pdump secondary process to primary process by same file-
> prefix
> + self.vuser0_port = 'net_virtio_user0'
> + self.launch_pdump_to_capture_pkt(self.vuser0_port)
> + self.start_to_send_8k_packets_csum(self.vhost)
> +
> + #5. Check all the packets length is 8000 Byte in the pcap file
> + self.pkt_len = 8000
> + self.check_packet_payload_valid(self.pkt_len)
> +
> + # reconnet from vhost
> + self.relanuch_vhost_testpmd_send_8k_packets(extern_params)
> +
> + # reconnet from virtio
> + self.logger.info('now reconnet from virtio_user with other path')
> + case_info = 'packed ring mergeable path'
> + mode = "mrg_rxbuf=1,in_order=0,packed_vq=1"
> + self.relanuch_virtio_testpmd_with_multi_path(mode, case_info,
> extern_params)
> +
> + case_info = 'split ring mergeable inorder path'
> + mode = "mrg_rxbuf=1,in_order=1"
> + self.relanuch_virtio_testpmd_with_multi_path(mode, case_info,
> extern_params)
> +
> + case_info = 'split ring mergeable path'
> + mode = "mrg_rxbuf=1,in_order=0"
> + self.relanuch_virtio_testpmd_with_multi_path(mode, case_info,
> extern_params)
> +
> + self.close_all_testpmd()
> +
> + def
> test_server_mode_reconnect_with_packed_and_split_mergeable_path_cbd
> ma_payload_check(self):
> + """
> + Test Case 14: loopback packed ring and split ring mergeable path
> cbdma test payload check with server mode and multi-queues
> + """
> + self.cbdma_nic_dev_num = 8
> + self.get_cbdma_ports_info_and_bind_to_dpdk()
> + self.queue_number = 8
> + self.vdev = f"--vdev 'eth_vhost0,iface=vhost-
> net,queues={self.queue_number},client=1,dmas=[txq0@{self.cbdma_dev_in
> fos[0]};txq1@{self.cbdma_dev_infos[1]};txq2@{self.cbdma_dev_infos[2]};txq
> 3@{self.cbdma_dev_infos[3]};txq4@{self.cbdma_dev_infos[4]};txq5@{self.cb
> dma_dev_infos[5]};txq6@{self.cbdma_dev_infos[6]};txq7@{self.cbdma_dev_
> infos[7]}]' "
> +
> + self.nb_cores = 1
> + extern_params = '--txd=1024 --rxd=1024'
> + case_info = 'packed ring mergeable inorder path'
> + mode = "mrg_rxbuf=1,in_order=1,packed_vq=1"
> +
> +
> self.lanuch_vhost_testpmd_with_cbdma(extern_params=extern_params)
> + self.logger.info(case_info)
> + self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode,
> extern_params=extern_params, set_fwd_mac=False)
> + self.virtio_user_pmd.execute_cmd("set fwd csum")
> + self.virtio_user_pmd.execute_cmd("start")
> + # 3. Attach pdump secondary process to primary process by same file-
> prefix
> + self.vuser0_port = 'net_virtio_user0'
> + self.launch_pdump_to_capture_pkt(self.vuser0_port)
> + self.start_to_send_8k_packets_csum_cbdma(self.vhost)
> +
> + # 5. Check all the packets length is 6192 Byte in the pcap file
> + self.pkt_len = 6192
> + self.check_packet_payload_valid(self.pkt_len)
> + #reconnet from vhost
> + self.relanuch_vhost_testpmd_send_8k_packets(extern_params,
> cbdma=True)
> +
> + # reconnet from virtio
> + self.logger.info('now reconnet from virtio_user with other path')
> + case_info = 'packed ring mergeable path'
> + mode = "mrg_rxbuf=1,in_order=0,packed_vq=1"
> + self.relanuch_virtio_testpmd_with_multi_path(mode, case_info,
> extern_params, cbdma=True)
> +
> + case_info = 'split ring mergeable inorder path'
> + mode = "mrg_rxbuf=1,in_order=1"
> + self.relanuch_virtio_testpmd_with_multi_path(mode, case_info,
> extern_params, cbdma=True)
> +
> + case_info = 'split ring mergeable path'
> + mode = "mrg_rxbuf=1,in_order=0"
> + self.relanuch_virtio_testpmd_with_multi_path(mode, case_info,
> extern_params, cbdma=True)
> +
> + self.close_all_testpmd()
> +
> + def lanuch_vhost_testpmd_with_cbdma(self, extern_params=""):
> + """
> + start testpmd with cbdma
> + """
> + param = "--rxq={} --txq={} --nb-cores={} {}".format(self.queue_number,
> self.queue_number, self.nb_cores, extern_params)
> + self.vhost_pmd.start_testpmd(self.core_list_host, param=param,
> no_pci=False, ports=[], eal_param=self.vdev, prefix='vhost',
> fixed_prefix=True)
> +
> + def get_cbdma_ports_info_and_bind_to_dpdk(self):
> + """
> + get all cbdma ports
> + """
> + out = self.dut.send_expect('./usertools/dpdk-devbind.py --status-dev
> dma', '# ', 30)
> + device_info = out.split('\n')
> + for device in device_info:
> + pci_info = re.search('\s*(0000:\S*:\d*.\d*)', device)
> + if pci_info is not None:
> + dev_info = pci_info.group(1)
> + # the numa id of ioat dev, only add the device which on same
> socket with nic dev
> + bus = int(dev_info[5:7], base=16)
> + if bus >= 128:
> + cur_socket = 1
> + else:
> + cur_socket = 0
> + if self.ports_socket == cur_socket:
> + self.cbdma_dev_infos.append(pci_info.group(1))
> + self.verify(len(self.cbdma_dev_infos) >= 8, 'There no enough cbdma
> device to run this suite')
> + self.device_str = '
> '.join(self.cbdma_dev_infos[0:self.cbdma_nic_dev_num])
> + self.dut.send_expect('./usertools/dpdk-devbind.py --force --
> bind=%s %s' % (self.drivername, self.device_str), '# ', 60)
> +
> + def bind_cbdma_device_to_kernel(self):
> + if self.device_str is not None:
> + self.dut.send_expect('modprobe ioatdma', '# ')
> + self.dut.send_expect('./usertools/dpdk-devbind.py -u %s' %
> self.device_str, '# ', 30)
> + self.dut.send_expect('./usertools/dpdk-devbind.py --force --
> bind=ioatdma %s' % self.device_str, '# ', 60)
> +
> def tear_down(self):
> """
> Run after each test case.
> """
> self.dut.send_expect("killall -s INT %s" % self.testpmd_name, "#")
> self.close_all_session()
> + self.bind_cbdma_device_to_kernel()
> time.sleep(2)
>
> def tear_down_all(self):
> --
> 2.33.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [dts][PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: add two new cases
@ 2021-11-25 15:58 Lingli Chen
0 siblings, 0 replies; 11+ messages in thread
From: Lingli Chen @ 2021-11-25 15:58 UTC (permalink / raw)
To: dts; +Cc: Lingli Chen
Add 2 new cases: case 13, 14.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
...back_virtio_user_server_mode_test_plan.rst | 114 ++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
index f3e9f1de..13f28126 100644
--- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
+++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
@@ -826,3 +826,117 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
11. Check each RX/TX queue has packets::
testpmd>stop
+
+Test Case 13: loopback packed ring and split ring mergeable path payload check test using server mode and multi-queues
+======================================================================================================================
+
+1. launch vhost::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32-33 --no-pci --file-prefix=vhost -n 4 --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1' -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+
+2. Launch virtio-user with packed ring mergeable inorder path::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio -- --pdump 'device_id=net_virtio_user0,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
+
+4. Send large pkts from vhost::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 2000,2000,2000,2000
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> stop
+
+5. Quit pdump, check all the packets length are 8000 Byte in the pcap file, and the payload in receive packets are same.
+
+6. Quit and relaunch vhost and rerun step3-5.
+
+7. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+8. Rerun step3-6.
+
+9. Quit and relaunch virtio with split ring mergeable inorder path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+10. Rerun step3-6.
+
+11. Quit and relaunch virtio with split ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+12. Rerun step3-6.
+
+Test Case 14: loopback packed ring and split ring mergeable path cbdma test payload check with server mode and multi-queues
+===========================================================================================================================
+
+1. bind 8 cbdma port to vfio-pci and launch vhost::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32-33 -n 4 --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+
+2. Launch virtio-user with packed ring mergeable inorder path::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio-user0 -- --pdump 'device_id=net_virtio_user0,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
+
+4. Send large pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> vhost enable tx all
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,64,64,2000,2000,2000
+ testpmd> start tx_first 32
+ testpmd> stop
+
+5. Quit pdump, check all the packets length are 6192 Byte in the pcap file, and the payload in receive packets are same.
+
+6. Quit and relaunch vhost and rerun step3-5.
+
+7. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+8. Rerun step3-6.
+
+9. Quit and relaunch virtio with split ring mergeable inorder path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+10. Rerun step3-6.
+
+11. Quit and relaunch virtio with split ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+12. Rerun step3-6.
+
+13. Quit and relaunch vhost w/ iova=pa::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-3 --file-prefix=vhost -n 4 --vdev \
+ 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=pa -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+
+14. rerun step3-5.
--
2.33.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: add two new cases
2021-11-05 14:58 [dts] [PATCH V1 0/2] loopback_virtio_user_server_mode: " Lingli Chen
@ 2021-11-05 14:58 ` Lingli Chen
0 siblings, 0 replies; 11+ messages in thread
From: Lingli Chen @ 2021-11-05 14:58 UTC (permalink / raw)
To: dts; +Cc: yinan.wang, Lingli Chen
1. Case 3, Case 10 change to 8 queues.
2. Case 4, Case 8 add 8k packets.
3. Add 2 new cases: case 13, 14.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
...back_virtio_user_server_mode_test_plan.rst | 242 ++++++++++++++----
1 file changed, 187 insertions(+), 55 deletions(-)
diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
index 18d580f4..810db9ea 100644
--- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
+++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
@@ -84,35 +84,38 @@ Test Case 2: Basic test for split ring server mode
Test Case 3: loopback reconnect test with split ring mergeable path and server mode
===================================================================================
-1. launch vhost as client mode with 2 queues::
+1. launch vhost as client mode with 8 queues::
rm -rf vhost-net*
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 8 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
testpmd> show port info 0
#it should show "down"
-4. Relaunch vhost and send packets::
+4. Relaunch vhost and send chain packets::
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -130,22 +133,24 @@ Test Case 3: loopback reconnect test with split ring mergeable path and server m
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -164,13 +169,15 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues, check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -182,9 +189,10 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -205,19 +213,21 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1\
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -236,13 +246,14 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -256,7 +267,7 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -279,13 +290,13 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -308,13 +319,14 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -328,7 +340,7 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -351,13 +363,13 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -380,13 +392,14 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -400,7 +413,7 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -423,13 +436,13 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -452,13 +465,15 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -470,9 +485,10 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -493,19 +509,21 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -524,13 +542,14 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -544,7 +563,7 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -567,13 +586,13 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -588,21 +607,23 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
Test Case 10: loopback reconnect test with packed ring inorder mergeable path and server mode
=============================================================================================
-1. launch vhost as client mode with 2 queues::
+1. launch vhost as client mode with 8 queues::
rm -rf vhost-net*
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 8 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -612,11 +633,12 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
4. Relaunch vhost and send packets::
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -634,22 +656,24 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -668,13 +692,14 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -688,7 +713,7 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -711,13 +736,13 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -740,13 +765,14 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --log-level=pmd.net.virtio.driver,8 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -760,7 +786,7 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -783,13 +809,13 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -800,3 +826,109 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
11. Check each RX/TX queue has packets::
testpmd>stop
+
+Test Case 13: loopback packed ring and split ring mergeable path payload check test using server mode and multi-queues
+======================================================================================================================
+
+1. launch vhost::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32-33 --no-pci --file-prefix=vhost -n 4 --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1' -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+
+2. Launch virtio-user with packed ring mergeable inorder path::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio -- --pdump 'device_id=net_virtio_user0,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
+
+4. Send large pkts from vhost::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 2000,2000,2000,2000
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> stop
+
+5. Quit pdump, chcek all the packets length are 8000 Byte in the pcap file, and the payload in receive packets are same.
+
+6. Quit and relaunch vhost and rerun step3-5.
+
+7. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+8. Rerun step3-6.
+
+9. Quit and relaunch virtio with split ring mergeable inorder path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+10. Rerun step3-6.
+
+11. Quit and relaunch virtio with split ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+12. Rerun step3-6.
+
+Test Case 14: loopback packed ring and split ring mergeable path cbdma test payload check with server mode and multi-queues
+===========================================================================================================================
+
+1. bind 8 cbdma port to vfio-pci and launch vhost::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32-33 -n 4 --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+
+2. Launch virtio-user with packed ring mergeable inorder path::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+3. Attach pdump secondary process to primary process by same file-prefix::
+
+./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio-user0 -- --pdump 'device_id=net_virtio_user0,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
+
+4. Send large pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> vhost enable tx all
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,64,64,2000,2000,2000
+ testpmd> start tx_first 32
+ testpmd> stop
+
+5. Quit pdump, chcek all the packets length are 6192 Byte in the pcap file, and the payload in receive packets are same.
+
+6. Quit and relaunch vhost and rerun step3-5.
+
+7. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+8. Rerun step3-6.
+
+9. Quit and relaunch virtio with split ring mergeable inorder path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+10. Rerun step3-6.
+
+11. Quit and relaunch virtio with split ring mergeable path as below::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=testpmd0 --no-pci --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd> set fwd csum
+ testpmd> start
+
+12. Rerun step3-6.
--
2.33.1
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-11-25 7:58 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-05 15:07 [dts] [PATCH V1 0/2] loopback_virtio_user_server_mode: add two new cases Lingli Chen
2021-11-05 15:07 ` [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: " Lingli Chen
2021-11-05 14:38 ` Tu, Lijuan
2021-11-08 6:31 ` Chen, LingliX
2021-11-09 9:14 ` Tu, Lijuan
2021-11-05 15:07 ` [dts] [PATCH V1 2/2] tests/loopback_virtio_user_server_mode: " Lingli Chen
2021-11-05 7:17 ` Chen, LingliX
2021-11-05 9:10 ` Wang, Yinan
2021-11-22 8:32 ` [dts][PATCH " Wang, Yinan
-- strict thread matches above, loose matches on Subject: below --
2021-11-25 15:58 [dts][PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: " Lingli Chen
2021-11-05 14:58 [dts] [PATCH V1 0/2] loopback_virtio_user_server_mode: " Lingli Chen
2021-11-05 14:58 ` [dts] [PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: " Lingli Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).