* [dts][PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: modify for case coverage improvement
2021-11-11 17:32 [dts][PATCH V1 0/2] loopback_virtio_user_server_mode: modify for case coverage improvement Lingli Chen
@ 2021-11-11 17:32 ` Lingli Chen
2021-11-11 17:32 ` [dts][PATCH V1 2/2] tests/loopback_virtio_user_server_mode: Modify case sync with testplan Lingli Chen
1 sibling, 0 replies; 6+ messages in thread
From: Lingli Chen @ 2021-11-11 17:32 UTC (permalink / raw)
To: dts; +Cc: Lingli Chen
1. Case 3, Case 10 change to 8 queues.
2. Case 3, 4, 8, 10 add 8k packets.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
...back_virtio_user_server_mode_test_plan.rst | 136 +++++++++++-------
1 file changed, 81 insertions(+), 55 deletions(-)
diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
index 18d580f4..f3e9f1de 100644
--- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
+++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
@@ -84,35 +84,38 @@ Test Case 2: Basic test for split ring server mode
Test Case 3: loopback reconnect test with split ring mergeable path and server mode
===================================================================================
-1. launch vhost as client mode with 2 queues::
+1. launch vhost as client mode with 8 queues::
rm -rf vhost-net*
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 8 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
testpmd> show port info 0
#it should show "down"
-4. Relaunch vhost and send packets::
+4. Relaunch vhost and send chain packets::
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -130,22 +133,24 @@ Test Case 3: loopback reconnect test with split ring mergeable path and server m
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -164,13 +169,15 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues, check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -182,9 +189,10 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -205,19 +213,21 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1\
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -236,13 +246,14 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -256,7 +267,7 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -279,13 +290,13 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -308,13 +319,14 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -328,7 +340,7 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -351,13 +363,13 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -380,13 +392,14 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -400,7 +413,7 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -423,13 +436,13 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -452,13 +465,15 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -470,9 +485,10 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -493,19 +509,21 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -524,13 +542,14 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -544,7 +563,7 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -567,13 +586,13 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -588,21 +607,23 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
Test Case 10: loopback reconnect test with packed ring inorder mergeable path and server mode
=============================================================================================
-1. launch vhost as client mode with 2 queues::
+1. launch vhost as client mode with 8 queues::
rm -rf vhost-net*
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 8 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -612,11 +633,12 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
4. Relaunch vhost and send packets::
./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=8' -- -i --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -634,22 +656,24 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=8 --txq=8
>set fwd mac
+ >set txpkts 2000,2000,2000,2000
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
+ testpmd>set txpkts 2000,2000,2000,2000
testpmd>start tx_first 32
testpmd>show port stats all
@@ -668,13 +692,14 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -688,7 +713,7 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -711,13 +736,13 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
@@ -740,13 +765,14 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start
-2. Launch virtio-user as server mode with 2 queues::
+2. Launch virtio-user as server mode with 2 queues and check throughput can get expected::
./testpmd -n 4 -l 5-7 --log-level=pmd.net.virtio.driver,8 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
+ >show port stats all
3. Quit vhost side testpmd, check the virtio-user side link status::
@@ -760,7 +786,7 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start tx_first 32
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+5. Check the virtio-user side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
@@ -783,13 +809,13 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
>set fwd mac
>start tx_first 32
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+9. Check the vhost side link status and run below command to get throughput, check throughput can get expected::
testpmd> show port info 0
#it should show up"
testpmd>show port stats all
-10. Port restart at vhost side by below command and re-calculate the average throughput::
+10. Port restart at vhost side by below command and check throughput can get expected::
testpmd>stop
testpmd>port stop 0
--
2.33.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [dts][PATCH V1 2/2] tests/loopback_virtio_user_server_mode: Modify case sync with testplan
2021-11-11 17:32 [dts][PATCH V1 0/2] loopback_virtio_user_server_mode: modify for case coverage improvement Lingli Chen
2021-11-11 17:32 ` [dts][PATCH V1 1/2] test_plans/loopback_virtio_user_server_mode: " Lingli Chen
@ 2021-11-11 17:32 ` Lingli Chen
2021-11-11 9:34 ` Chen, LingliX
1 sibling, 1 reply; 6+ messages in thread
From: Lingli Chen @ 2021-11-11 17:32 UTC (permalink / raw)
To: dts; +Cc: Lingli Chen
Modify case 3, 4, 8, 10 sync with testplan.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
...tSuite_loopback_virtio_user_server_mode.py | 170 ++++++++++++------
1 file changed, 112 insertions(+), 58 deletions(-)
diff --git a/tests/TestSuite_loopback_virtio_user_server_mode.py b/tests/TestSuite_loopback_virtio_user_server_mode.py
index 7fbfe804..ed01de2f 100644
--- a/tests/TestSuite_loopback_virtio_user_server_mode.py
+++ b/tests/TestSuite_loopback_virtio_user_server_mode.py
@@ -37,11 +37,10 @@ Test loopback virtio-user server mode
"""
import re
import time
-
import framework.utils as utils
from framework.pmd_output import PmdOutput
from framework.test_case import TestCase
-
+from framework.packet import Packet
class TestLoopbackVirtioUserServerMode(TestCase):
@@ -61,6 +60,12 @@ class TestLoopbackVirtioUserServerMode(TestCase):
self.core_list_host = self.core_list[3:6]
self.path=self.dut.apps_name['test-pmd']
self.testpmd_name = self.path.split("/")[-1]
+ self.app_pdump = self.dut.apps_name['pdump']
+ self.dump_pcap = "/root/pdump-rx.pcap"
+ self.device_str = ''
+ self.dut_ports = self.dut.get_ports()
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+ self.cbdma_dev_infos = []
def set_up(self):
"""
@@ -108,13 +113,17 @@ class TestLoopbackVirtioUserServerMode(TestCase):
if set_fwd_mac:
self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
- def lanuch_vhost_testpmd_with_multi_queue(self, extern_params=""):
+ def lanuch_vhost_testpmd_with_multi_queue(self, extern_params="", set_fwd_mac=True):
"""
start testpmd with multi qeueue
"""
- self.lanuch_vhost_testpmd(self.queue_number, self.nb_cores, extern_params=extern_params)
+ eal_params = "--vdev 'eth_vhost0,iface=vhost-net,client=1,queues={}'".format(self.queue_number)
+ param = "--rxq={} --txq={} --nb-cores={} {}".format(self.queue_number, self.queue_number, self.nb_cores, extern_params)
+ self.vhost_pmd.start_testpmd(self.core_list_host, param=param, no_pci=True, ports=[], eal_param=eal_params, prefix='vhost', fixed_prefix=True)
+ if set_fwd_mac:
+ self.vhost_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
- def lanuch_virtio_user_testpmd_with_multi_queue(self, mode, extern_params=""):
+ def lanuch_virtio_user_testpmd_with_multi_queue(self, mode, extern_params="", set_fwd_mac=True):
"""
start testpmd of vhost user
"""
@@ -126,7 +135,8 @@ class TestLoopbackVirtioUserServerMode(TestCase):
param = "{} --nb-cores={} --rxq={} --txq={}".format(extern_params, self.nb_cores, self.queue_number, self.queue_number)
self.virtio_user_pmd.start_testpmd(cores=self.core_list_user, param=param, eal_param=eal_param, \
no_pci=True, ports=[], prefix="virtio", fixed_prefix=True)
- self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
+ if set_fwd_mac:
+ self.virtio_user_pmd.execute_cmd("set fwd mac", "testpmd> ", 120)
def start_to_send_packets(self, session_rx, session_tx):
"""
@@ -136,6 +146,35 @@ class TestLoopbackVirtioUserServerMode(TestCase):
session_rx.send_command("start", 3)
session_tx.send_expect("start tx_first 32", "testpmd> ", 30)
+ def start_to_send_8k_packets(self, session_rx, session_tx):
+ """
+ start the testpmd of vhost-user and virtio-user
+ start to send 8k packets
+ """
+ session_rx.send_command("start", 3)
+ session_tx.send_expect("set txpkts 2000,2000,2000,2000", "testpmd> ", 30)
+ session_tx.send_expect("start tx_first 32", "testpmd> ", 30)
+
+ def start_to_send_8k_packets_csum(self, session_tx):
+ """
+ start the testpmd of vhost-user, start to send 8k packets
+ """
+ session_tx.send_expect("set fwd csum", "testpmd> ", 30)
+ session_tx.send_expect("set txpkts 2000,2000,2000,2000", "testpmd> ", 30)
+ session_tx.send_expect("set burst 1", "testpmd> ", 30)
+ session_tx.send_expect("start tx_first 1", "testpmd> ", 10)
+ session_tx.send_expect("stop", "testpmd> ", 30)
+
+ def start_to_send_8k_packets_csum_cbdma(self, session_tx):
+ """
+ start the testpmd of vhost-user, start to send 8k packets
+ """
+ session_tx.send_expect("vhost enable tx all", "testpmd> ", 30)
+ session_tx.send_expect("set fwd csum", "testpmd> ", 30)
+ session_tx.send_expect("set txpkts 64,64,64,2000,2000,2000", "testpmd> ", 30)
+ session_tx.send_expect("start tx_first 32", "testpmd> ", 5)
+ session_tx.send_expect("stop", "testpmd> ", 30)
+
def check_port_throughput_after_port_stop(self):
"""
check the throughput after port stop
@@ -182,6 +221,16 @@ class TestLoopbackVirtioUserServerMode(TestCase):
self.check_port_link_status_after_port_restart()
self.vhost_pmd.execute_cmd("start tx_first 32", "testpmd> ", 120)
+ def port_restart_send_8k_packets(self):
+ self.vhost_pmd.execute_cmd("stop", "testpmd> ", 120)
+ self.vhost_pmd.execute_cmd("port stop 0", "testpmd> ", 120)
+ self.check_port_throughput_after_port_stop()
+ self.vhost_pmd.execute_cmd("clear port stats all", "testpmd> ", 120)
+ self.vhost_pmd.execute_cmd("port start 0", "testpmd> ", 120)
+ self.check_port_link_status_after_port_restart()
+ self.vhost_pmd.execute_cmd("set txpkts 2000,2000,2000,2000", "testpmd> ", 120)
+ self.vhost_pmd.execute_cmd("start tx_first 32", "testpmd> ", 120)
+
def relanuch_vhost_testpmd_with_multi_queue(self):
self.vhost_pmd.execute_cmd("quit", "#", 60)
self.check_link_status(self.virtio_user, "down")
@@ -192,7 +241,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
self.check_link_status(self.vhost, "down")
self.lanuch_virtio_user_testpmd_with_multi_queue(mode, extern_params)
- def calculate_avg_throughput(self, case_info, cycle):
+ def calculate_avg_throughput(self, case_info, cycle, Pkt_size=True):
"""
calculate the average throughput
"""
@@ -206,14 +255,19 @@ class TestLoopbackVirtioUserServerMode(TestCase):
result = lines.group(1)
results += float(result)
Mpps = results / (1000000 * 10)
- self.verify(Mpps > 5, "port can not receive packets")
-
results_row.append(case_info)
- results_row.append('64')
+ if Pkt_size:
+ self.verify(Mpps > 5, "port can not receive packets")
+ results_row.append('64')
+ else:
+ self.verify(Mpps > 1, "port can not receive packets")
+ results_row.append('8k')
+
results_row.append(Mpps)
results_row.append(self.queue_number)
results_row.append(cycle)
self.result_table_add(results_row)
+ self.logger.info(results_row)
def check_packets_of_each_queue(self):
"""
@@ -247,7 +301,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_launch_virtio_first(self):
"""
- basic test for virtio-user server mode, launch virtio-user first
+ Test Case 2: basic test for split ring server mode, launch virtio-user first
"""
self.queue_number = 1
self.nb_cores = 1
@@ -263,7 +317,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_launch_virtio11_first(self):
"""
- basic test for virtio-user server mode, launch virtio-user first
+ Test Case 1: basic test for packed ring server mode, launch virtio-user first
"""
self.queue_number = 1
self.nb_cores = 1
@@ -279,7 +333,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_mergeable_path(self):
"""
- reconnect test with virtio 1.1 mergeable path and server mode
+ Test Case 8: reconnect test with virtio 1.1 mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -288,25 +342,25 @@ class TestLoopbackVirtioUserServerMode(TestCase):
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "before reconnet")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "before reconnet", Pkt_size=False)
# reconnect from vhost
self.logger.info('now reconnet from vhost')
self.relanuch_vhost_testpmd_with_multi_queue()
- self.start_to_send_packets(self.virtio_user, self.vhost)
- self.calculate_avg_throughput(case_info, "reconnet from vhost")
+ self.start_to_send_8k_packets(self.virtio_user, self.vhost)
+ self.calculate_avg_throughput(case_info, "reconnet from vhost", Pkt_size=False)
# reconnet from virtio
self.logger.info('now reconnet from virtio_user')
self.relanuch_virtio_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "reconnet from virtio user")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "reconnet from virtio user", Pkt_size=False)
# port restart
self.logger.info('now vhost port restart')
- self.port_restart()
- self.calculate_avg_throughput(case_info, "after port restart")
+ self.port_restart_send_8k_packets()
+ self.calculate_avg_throughput(case_info, "after port restart", Pkt_size=False)
self.result_table_print()
self.check_packets_of_each_queue()
@@ -314,7 +368,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_non_mergeable_path(self):
"""
- reconnect test with virtio 1.1 non_mergeable path and server mode
+ Test Case 9: reconnect test with virtio 1.1 non_mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -349,34 +403,34 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_inorder_mergeable_path(self):
"""
- reconnect test with virtio 1.1 inorder mergeable path and server mode
+ Test Case 10: reconnect test with virtio 1.1 inorder mergeable path and server mode
"""
- self.queue_number = 2
+ self.queue_number = 8
self.nb_cores = 2
case_info = 'virtio1.1 inorder mergeable path'
mode = "packed_vq=1,in_order=1,mrg_rxbuf=1"
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "before reconnet")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "before reconnet", Pkt_size=False)
# reconnect from vhost
self.logger.info('now reconnet from vhost')
self.relanuch_vhost_testpmd_with_multi_queue()
- self.start_to_send_packets(self.virtio_user, self.vhost)
- self.calculate_avg_throughput(case_info, "reconnet from vhost")
+ self.start_to_send_8k_packets(self.virtio_user, self.vhost)
+ self.calculate_avg_throughput(case_info, "reconnet from vhost", Pkt_size=False)
# reconnet from virtio
self.logger.info('now reconnet from virtio_user')
self.relanuch_virtio_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "reconnet from virtio user")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "reconnet from virtio user", Pkt_size=False)
# port restart
self.logger.info('now vhost port restart')
- self.port_restart()
- self.calculate_avg_throughput(case_info, "after port restart")
+ self.port_restart_send_8k_packets()
+ self.calculate_avg_throughput(case_info, "after port restart", Pkt_size=False)
self.result_table_print()
self.check_packets_of_each_queue()
@@ -384,11 +438,11 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_inorder_non_mergeable_path(self):
"""
- reconnect test with virtio 1.1 inorder non_mergeable path and server mode
+ Test Case 11: reconnect test with virtio 1.1 inorder non_mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
- case_info = 'virtio1.1 non_mergeable path'
+ case_info = 'virtio1.1 inorder non_mergeable path'
mode = "packed_vq=1,in_order=1,mrg_rxbuf=0,vectorized=1"
extern_params = '--rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
@@ -419,11 +473,11 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio11_inorder_vectorized_path(self):
"""
- reconnect test with virtio 1.1 inorder non_mergeable path and server mode
+ Test Case 12: reconnect test with virtio 1.1 inorder vectorized path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
- case_info = 'virtio1.1 non_mergeable path'
+ case_info = 'virtio1.1 inorder vectorized path'
mode = "packed_vq=1,in_order=1,mrg_rxbuf=0,vectorized=1"
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
@@ -454,7 +508,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_inorder_mergeable_path(self):
"""
- reconnect test with virtio 1.0 inorder mergeable path and server mode
+ Test Case 4: reconnect test with virtio 1.0 inorder mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -463,25 +517,25 @@ class TestLoopbackVirtioUserServerMode(TestCase):
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "before reconnet")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "before reconnet", Pkt_size=False)
# reconnet from vhost
self.logger.info('now reconnet from vhost')
self.relanuch_vhost_testpmd_with_multi_queue()
- self.start_to_send_packets(self.virtio_user, self.vhost)
- self.calculate_avg_throughput(case_info, "reconnet from vhost")
+ self.start_to_send_8k_packets(self.virtio_user, self.vhost)
+ self.calculate_avg_throughput(case_info, "reconnet from vhost", Pkt_size=False)
# reconnet from virtio
self.logger.info('now reconnet from virtio_user')
self.relanuch_virtio_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "reconnet from virtio_user")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "reconnet from virtio_user", Pkt_size=False)
# port restart
self.logger.info('now vhost port restart')
- self.port_restart()
- self.calculate_avg_throughput(case_info, "after port restart")
+ self.port_restart_send_8k_packets()
+ self.calculate_avg_throughput(case_info, "after port restart", Pkt_size=False)
self.result_table_print()
self.check_packets_of_each_queue()
@@ -489,7 +543,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_inorder_non_mergeable_path(self):
"""
- reconnect test with virtio 1.0 inorder non_mergeable path and server mode
+ Test Case 5: reconnect test with virtio 1.0 inorder non_mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -524,34 +578,34 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_mergeable_path(self):
"""
- reconnect test with virtio 1.0 mergeable path and server mode
+ Test Case 3: reconnect test with virtio 1.0 mergeable path and server mode
"""
- self.queue_number = 2
+ self.queue_number = 8
self.nb_cores = 2
case_info = 'virtio1.0 mergeable path'
mode = "in_order=0,mrg_rxbuf=1"
extern_params = '--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip'
self.lanuch_vhost_testpmd_with_multi_queue()
self.lanuch_virtio_user_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "before reconnet")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "before reconnet", Pkt_size=False)
# reconnet from vhost
self.logger.info('now reconnet from vhost')
self.relanuch_vhost_testpmd_with_multi_queue()
- self.start_to_send_packets(self.virtio_user, self.vhost)
- self.calculate_avg_throughput(case_info, "reconnet from vhost")
+ self.start_to_send_8k_packets(self.virtio_user, self.vhost)
+ self.calculate_avg_throughput(case_info, "reconnet from vhost", Pkt_size=False)
# reconnet from virtio
self.logger.info('now reconnet from virtio_user')
self.relanuch_virtio_testpmd_with_multi_queue(mode=mode, extern_params=extern_params)
- self.start_to_send_packets(self.vhost, self.virtio_user)
- self.calculate_avg_throughput(case_info, "reconnet from virtio_user")
+ self.start_to_send_8k_packets(self.vhost, self.virtio_user)
+ self.calculate_avg_throughput(case_info, "reconnet from virtio_user", Pkt_size=False)
# port restart
self.logger.info('now vhost port restart')
- self.port_restart()
- self.calculate_avg_throughput(case_info, "after port restart")
+ self.port_restart_send_8k_packets()
+ self.calculate_avg_throughput(case_info, "after port restart", Pkt_size=False)
self.result_table_print()
self.check_packets_of_each_queue()
@@ -559,7 +613,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_non_mergeable_path(self):
"""
- reconnect test with virtio 1.0 non_mergeable path and server mode
+ Test Case 6: reconnect test with virtio 1.0 non_mergeable path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
@@ -594,7 +648,7 @@ class TestLoopbackVirtioUserServerMode(TestCase):
def test_server_mode_reconnect_with_virtio10_vector_rx_path(self):
"""
- reconnect test with virtio 1.0 vector_rx path and server mode
+ Test Case 7: reconnect test with virtio 1.0 vector_rx path and server mode
"""
self.queue_number = 2
self.nb_cores = 2
--
2.33.1
^ permalink raw reply [flat|nested] 6+ messages in thread