* [dts][PATCH V1 1/3] test_plans/vm2vm_virtio_net_perf: modify and add cases
@ 2021-12-06 9:28 Wei Ling
0 siblings, 0 replies; 4+ messages in thread
From: Wei Ling @ 2021-12-06 9:28 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
case 5: Add test step to test exchange CBDMA channel and PA mode.
case 13 and 14: Add new test case to cover the packed ring and PA mode.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
.../vm2vm_virtio_net_perf_test_plan.rst | 367 +++++++++++++-----
1 file changed, 275 insertions(+), 92 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index d4c49851..e5037ca8 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -38,14 +38,17 @@ Description
===========
This test plan test several features in VM2VM topo:
-1. Check Vhost tx offload (TSO and UFO) function by verifing the TSO/cksum in the TCP/IP stack and UFO/cksum
+1. Check Vhost tx offload (TSO and UFO) function by verifying the TSO/cksum in the TCP/IP stack and UFO/cksum
in the UDP/IP stack with vm2vm split ring and packed ring vhost-user/virtio-net mergeable path.
2. Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring
and packed ring vhost-user/virtio-net mergeable and non-mergeable path.
+3. Check Vhost tx offload function by verifing the TSO/cksum in the TCP/IP stack with vm2vm split ring and
+packed ring vhost-user/virtio-net mergeable path with CBDMA channel.
3. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring when vhost enqueue operation with multi-CBDMA channels.
Note:
1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version > LTS 4.2.1, dut to old qemu exist reconnect issue when multi-queues test.
+3.For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
Test flow
=========
@@ -58,8 +61,10 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
1. Launch the Vhost sample on socket 0 by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2 on socket 1::
@@ -75,7 +80,7 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -86,12 +91,12 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -110,14 +115,16 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp traffic
======================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1]' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:80:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:80:04.1]' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 on socket 1::
+2. Launch VM1 and VM2::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -130,7 +137,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -141,12 +148,12 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -170,8 +177,10 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2::
@@ -198,12 +207,12 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -225,8 +234,10 @@ Test Case 4: Check split ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2,set TSO and UFO on in qemu command::
@@ -242,7 +253,7 @@ Test Case 4: Check split ring virtio-net device capability
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -267,17 +278,19 @@ Test Case 4: Check split ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test with large packet payload valid check
-====================================================================================================================
+Test Case 5: VM2VM split ring vhost-user/virtio-net mergeable 8 queues CBDMA enable test with large packet payload valid check
+==============================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 using qemu 5.2.0::
+2. Launch VM1 and VM2 using qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -290,7 +303,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -301,13 +314,13 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.8
@@ -322,52 +335,86 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+7. Quit and relaunch vhost w/ diff CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+8. Rerun step 5-6.
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+9. Quit and relaunch vhost w/ iova=pa::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+10. Rerun step 5-6.
+
+11. Quit and relaunch vhost w/o CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd>start
-8. Scp 1MB file form VM1 to VM2::
+12. On VM1, set virtio device::
+
+ ethtool -L ens5 combined 4
+
+13. On VM2, set virtio device::
+
+ ethtool -L ens5 combined 4
+
+14. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-9. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
+15. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-10. Quit vhost ports and relaunch vhost ports with 1 queues::
+16. Quit and relaunch vhost with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
-11. On VM1, set virtio device::
+17. On VM1, set virtio device::
ethtool -L ens5 combined 1
-12. On VM2, set virtio device::
+18. On VM2, set virtio device::
ethtool -L ens5 combined 1
-13. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+19. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-14. Check the iperf performance, ensure queue0 can work from vhost side::
+20. Check the iperf performance, ensure queue0 can work from vhost side::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
-========================================================================================================================
+Test Case 6: VM2VM split ring vhost-user/virtio-net non-mergeable 8 queues CBDMA enable test with large packet payload valid check
+==================================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu 5.2.0::
@@ -383,7 +430,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -394,13 +441,13 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.8
@@ -415,10 +462,12 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+7. Quit and relaunch vhost ports w/o CBDMA channels::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
8. Scp 1MB file form VM1 to VM2::
@@ -430,10 +479,12 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-10. Quit vhost ports and relaunch vhost ports with 1 queues::
+10. Quit and relaunch vhost ports with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
11. On VM1, set virtio device::
@@ -456,14 +507,16 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
==========================================================================
-1. Launch the Vhost sample by below commands::,packed=on
+1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -476,7 +529,7 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -487,12 +540,12 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -511,14 +564,16 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic
=======================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1]' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:00:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:00:04.1]' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 on socket 1 with qemu 5.2.0::
+2. Launch VM1 and VM2 on socket 1 with qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -531,7 +586,7 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -542,12 +597,12 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -571,11 +626,13 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 40 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -588,7 +645,7 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -599,12 +656,12 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -626,11 +683,13 @@ Test Case 10: Check packed ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0,set TSO and UFO on in qemu command::
+2. Launch VM1 and VM2 with qemu,set TSO and UFO on in qemu command::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -643,7 +702,7 @@ Test Case 10: Check packed ring virtio-net device capability
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -671,14 +730,16 @@ Test Case 10: Check packed ring virtio-net device capability
Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test with large packet payload valid check
=====================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -691,7 +752,7 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -702,13 +763,13 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.8
@@ -728,11 +789,13 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
=========================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2::
@@ -748,7 +811,7 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -759,13 +822,133 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocol::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Rerun step 5-6 five times.
+
+Test Case 13: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic when set iova=pa
+=========================================================================================================
+
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:00:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:00:04.1]' \
+ --iova=pa -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2 on socket 1 with qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocol::
+
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocol::
+
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Check 2VMs can receive and send big packets to each other::
+
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
+
+Test Case 14: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable and PA mode test with large packet payload valid check
+=================================================================================================================================
+
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+2. Launch VM1 and VM2 with qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.8
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts][PATCH V1 1/3] test_plans/vm2vm_virtio_net_perf: modify and add cases
@ 2021-12-06 9:46 Wei Ling
0 siblings, 0 replies; 4+ messages in thread
From: Wei Ling @ 2021-12-06 9:46 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
case 5: Add test step to test exchange CBDMA channel and PA mode.
case 13 and 14: Add new test case to cover the packed ring and PA mode.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
.../vm2vm_virtio_net_perf_test_plan.rst | 367 +++++++++++++-----
1 file changed, 275 insertions(+), 92 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index d4c49851..7dcf77c7 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -38,14 +38,17 @@ Description
===========
This test plan test several features in VM2VM topo:
-1. Check Vhost tx offload (TSO and UFO) function by verifing the TSO/cksum in the TCP/IP stack and UFO/cksum
+1. Check Vhost tx offload (TSO and UFO) function by verifying the TSO/cksum in the TCP/IP stack and UFO/cksum
in the UDP/IP stack with vm2vm split ring and packed ring vhost-user/virtio-net mergeable path.
2. Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring
and packed ring vhost-user/virtio-net mergeable and non-mergeable path.
+3. Check Vhost tx offload function by verifying the TSO/cksum in the TCP/IP stack with vm2vm split ring and
+packed ring vhost-user/virtio-net mergeable path with CBDMA channel.
3. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring when vhost enqueue operation with multi-CBDMA channels.
Note:
1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version > LTS 4.2.1, dut to old qemu exist reconnect issue when multi-queues test.
+3.For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
Test flow
=========
@@ -58,8 +61,10 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
1. Launch the Vhost sample on socket 0 by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2 on socket 1::
@@ -75,7 +80,7 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -86,12 +91,12 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -110,14 +115,16 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp traffic
======================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1]' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:80:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:80:04.1]' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 on socket 1::
+2. Launch VM1 and VM2::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -130,7 +137,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -141,12 +148,12 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -170,8 +177,10 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2::
@@ -198,12 +207,12 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -225,8 +234,10 @@ Test Case 4: Check split ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2,set TSO and UFO on in qemu command::
@@ -242,7 +253,7 @@ Test Case 4: Check split ring virtio-net device capability
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -267,17 +278,19 @@ Test Case 4: Check split ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test with large packet payload valid check
-====================================================================================================================
+Test Case 5: VM2VM split ring vhost-user/virtio-net mergeable 8 queues CBDMA enable test with large packet payload valid check
+==============================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 using qemu 5.2.0::
+2. Launch VM1 and VM2 using qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -290,7 +303,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -301,13 +314,13 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.8
@@ -322,52 +335,86 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+7. Quit and relaunch vhost w/ diff CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+8. Rerun step 5-6.
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+9. Quit and relaunch vhost w/ iova=pa::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+10. Rerun step 5-6.
+
+11. Quit and relaunch vhost w/o CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd>start
-8. Scp 1MB file form VM1 to VM2::
+12. On VM1, set virtio device::
+
+ ethtool -L ens5 combined 4
+
+13. On VM2, set virtio device::
+
+ ethtool -L ens5 combined 4
+
+14. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-9. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
+15. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-10. Quit vhost ports and relaunch vhost ports with 1 queues::
+16. Quit and relaunch vhost with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
-11. On VM1, set virtio device::
+17. On VM1, set virtio device::
ethtool -L ens5 combined 1
-12. On VM2, set virtio device::
+18. On VM2, set virtio device::
ethtool -L ens5 combined 1
-13. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+19. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-14. Check the iperf performance, ensure queue0 can work from vhost side::
+20. Check the iperf performance, ensure queue0 can work from vhost side::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
-========================================================================================================================
+Test Case 6: VM2VM split ring vhost-user/virtio-net non-mergeable 8 queues CBDMA enable test with large packet payload valid check
+==================================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu 5.2.0::
@@ -383,7 +430,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -394,13 +441,13 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.8
@@ -415,10 +462,12 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+7. Quit and relaunch vhost ports w/o CBDMA channels::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
8. Scp 1MB file form VM1 to VM2::
@@ -430,10 +479,12 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-10. Quit vhost ports and relaunch vhost ports with 1 queues::
+10. Quit and relaunch vhost ports with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
11. On VM1, set virtio device::
@@ -456,14 +507,16 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
==========================================================================
-1. Launch the Vhost sample by below commands::,packed=on
+1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -476,7 +529,7 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -487,12 +540,12 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -511,14 +564,16 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic
=======================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1]' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:00:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:00:04.1]' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 on socket 1 with qemu 5.2.0::
+2. Launch VM1 and VM2 on socket 1 with qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -531,7 +586,7 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -542,12 +597,12 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -571,11 +626,13 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 40 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -588,7 +645,7 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -599,12 +656,12 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
@@ -626,11 +683,13 @@ Test Case 10: Check packed ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0,set TSO and UFO on in qemu command::
+2. Launch VM1 and VM2 with qemu,set TSO and UFO on in qemu command::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -643,7 +702,7 @@ Test Case 10: Check packed ring virtio-net device capability
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -671,14 +730,16 @@ Test Case 10: Check packed ring virtio-net device capability
Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test with large packet payload valid check
=====================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -691,7 +752,7 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -702,13 +763,13 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.8
@@ -728,11 +789,13 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
=========================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2::
@@ -748,7 +811,7 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -759,13 +822,133 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
-3. On VM1, set virtio device IP and run arp protocal::
+3. On VM1, set virtio device IP and run arp protocol::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocol::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Rerun step 5-6 five times.
+
+Test Case 13: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic when set iova=pa
+=========================================================================================================
+
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:00:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:00:04.1]' \
+ --iova=pa -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2 on socket 1 with qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocol::
+
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocol::
+
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Check 2VMs can receive and send big packets to each other::
+
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
+
+Test Case 14: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable and PA mode test with large packet payload valid check
+=================================================================================================================================
+
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+2. Launch VM1 and VM2 with qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
-4. On VM2, set virtio device IP and run arp protocal::
+4. On VM2, set virtio device IP and run arp protocol::
ethtool -L ens5 combined 8
ifconfig ens5 1.1.1.8
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts][PATCH V1 1/3] test_plans/vm2vm_virtio_net_perf: modify and add cases
@ 2021-12-06 9:35 Wei Ling
0 siblings, 0 replies; 4+ messages in thread
From: Wei Ling @ 2021-12-06 9:35 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
case 5: Add test step to test exchange CBDMA channel and PA mode.
case 13 and 14: Add new test case to cover the packed ring and PA mode.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
.../vm2vm_virtio_net_perf_test_plan.rst | 325 ++++++++++++++----
1 file changed, 254 insertions(+), 71 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index d4c49851..b6144120 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -42,10 +42,13 @@ This test plan test several features in VM2VM topo:
in the UDP/IP stack with vm2vm split ring and packed ring vhost-user/virtio-net mergeable path.
2. Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring
and packed ring vhost-user/virtio-net mergeable and non-mergeable path.
+3. Check Vhost tx offload function by verifying the TSO/cksum in the TCP/IP stack with vm2vm split ring and
+packed ring vhost-user/virtio-net mergeable path with CBDMA channel.
3. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring when vhost enqueue operation with multi-CBDMA channels.
Note:
1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version > LTS 4.2.1, dut to old qemu exist reconnect issue when multi-queues test.
+3.For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
Test flow
=========
@@ -58,8 +61,10 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
1. Launch the Vhost sample on socket 0 by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2 on socket 1::
@@ -75,7 +80,7 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -110,14 +115,16 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp traffic
======================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1]' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:80:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:80:04.1]' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 on socket 1::
+2. Launch VM1 and VM2::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -130,7 +137,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -170,8 +177,10 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2::
@@ -225,8 +234,10 @@ Test Case 4: Check split ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2,set TSO and UFO on in qemu command::
@@ -242,7 +253,7 @@ Test Case 4: Check split ring virtio-net device capability
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -267,17 +278,19 @@ Test Case 4: Check split ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test with large packet payload valid check
-====================================================================================================================
+Test Case 5: VM2VM split ring vhost-user/virtio-net mergeable 8 queues CBDMA enable test with large packet payload valid check
+==============================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 using qemu 5.2.0::
+2. Launch VM1 and VM2 using qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -290,7 +303,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -322,52 +335,86 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+7. Quit and relaunch vhost w/ diff CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+8. Rerun step 5-6.
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+9. Quit and relaunch vhost w/ iova=pa::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+10. Rerun step 5-6.
+
+11. Quit and relaunch vhost w/o CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd>start
-8. Scp 1MB file form VM1 to VM2::
+12. On VM1, set virtio device::
+
+ ethtool -L ens5 combined 4
+
+13. On VM2, set virtio device::
+
+ ethtool -L ens5 combined 4
+
+14. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-9. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
+15. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-10. Quit vhost ports and relaunch vhost ports with 1 queues::
+16. Quit and relaunch vhost with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
-11. On VM1, set virtio device::
+17. On VM1, set virtio device::
ethtool -L ens5 combined 1
-12. On VM2, set virtio device::
+18. On VM2, set virtio device::
ethtool -L ens5 combined 1
-13. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+19. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-14. Check the iperf performance, ensure queue0 can work from vhost side::
+20. Check the iperf performance, ensure queue0 can work from vhost side::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
-========================================================================================================================
+Test Case 6: VM2VM split ring vhost-user/virtio-net non-mergeable 8 queues CBDMA enable test with large packet payload valid check
+==================================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu 5.2.0::
@@ -383,7 +430,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -415,10 +462,12 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+7. Quit and relaunch vhost ports w/o CBDMA channels::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
8. Scp 1MB file form VM1 to VM2::
@@ -430,10 +479,12 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-10. Quit vhost ports and relaunch vhost ports with 1 queues::
+10. Quit and relaunch vhost ports with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
11. On VM1, set virtio device::
@@ -456,14 +507,16 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
==========================================================================
-1. Launch the Vhost sample by below commands::,packed=on
+1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -476,7 +529,7 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -511,14 +564,16 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic
=======================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1]' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:00:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:00:04.1]' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 on socket 1 with qemu 5.2.0::
+2. Launch VM1 and VM2 on socket 1 with qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -531,7 +586,7 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -571,11 +626,13 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 40 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -588,7 +645,7 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -626,11 +683,13 @@ Test Case 10: Check packed ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0,set TSO and UFO on in qemu command::
+2. Launch VM1 and VM2 with qemu,set TSO and UFO on in qemu command::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -643,7 +702,7 @@ Test Case 10: Check packed ring virtio-net device capability
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -671,14 +730,16 @@ Test Case 10: Check packed ring virtio-net device capability
Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test with large packet payload valid check
=====================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -691,7 +752,7 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -728,11 +789,13 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
=========================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2::
@@ -748,7 +811,7 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -781,3 +844,123 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
7. Rerun step 5-6 five times.
+
+Test Case 13: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic when set iova=pa
+=========================================================================================================
+
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:00:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:00:04.1]' \
+ --iova=pa -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2 on socket 1 with qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Check 2VMs can receive and send big packets to each other::
+
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
+
+Test Case 14: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable and PA mode test with large packet payload valid check
+=================================================================================================================================
+
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+2. Launch VM1 and VM2 with qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Rerun step 5-6 five times.
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts][PATCH V1 1/3] test_plans/vm2vm_virtio_net_perf: modify and add cases
@ 2021-12-06 9:07 Wei Ling
0 siblings, 0 replies; 4+ messages in thread
From: Wei Ling @ 2021-12-06 9:07 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
case 5: Add test step to test exchange CBDMA channel and PA mode.
case 13 and 14: Add new test case to cover the packed ring and PA mode.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
.../vm2vm_virtio_net_perf_test_plan.rst | 325 ++++++++++++++----
1 file changed, 254 insertions(+), 71 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index d4c49851..d2819e03 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -42,10 +42,13 @@ This test plan test several features in VM2VM topo:
in the UDP/IP stack with vm2vm split ring and packed ring vhost-user/virtio-net mergeable path.
2. Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring
and packed ring vhost-user/virtio-net mergeable and non-mergeable path.
+3. Check Vhost tx offload function by verifing the TSO/cksum in the TCP/IP stack with vm2vm split ring and
+packed ring vhost-user/virtio-net mergeable path with CBDMA channel.
3. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring when vhost enqueue operation with multi-CBDMA channels.
Note:
1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version > LTS 4.2.1, dut to old qemu exist reconnect issue when multi-queues test.
+3.For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
Test flow
=========
@@ -58,8 +61,10 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
1. Launch the Vhost sample on socket 0 by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2 on socket 1::
@@ -75,7 +80,7 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -110,14 +115,16 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp traffic
======================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1]' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:80:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:80:04.1]' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 on socket 1::
+2. Launch VM1 and VM2::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -130,7 +137,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -170,8 +177,10 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2::
@@ -225,8 +234,10 @@ Test Case 4: Check split ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2,set TSO and UFO on in qemu command::
@@ -242,7 +253,7 @@ Test Case 4: Check split ring virtio-net device capability
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -267,17 +278,19 @@ Test Case 4: Check split ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test with large packet payload valid check
-====================================================================================================================
+Test Case 5: VM2VM split ring vhost-user/virtio-net mergeable 8 queues CBDMA enable test with large packet payload valid check
+==============================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 using qemu 5.2.0::
+2. Launch VM1 and VM2 using qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -290,7 +303,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -322,52 +335,86 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+7. Quit and relaunch vhost w/ diff CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+8. Rerun step 5-6.
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+9. Quit and relaunch vhost w/ iova=pa::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+10. Rerun step 5-6.
+
+11. Quit and relaunch vhost w/o CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd>start
-8. Scp 1MB file form VM1 to VM2::
+12. On VM1, set virtio device::
+
+ ethtool -L ens5 combined 4
+
+13. On VM2, set virtio device::
+
+ ethtool -L ens5 combined 4
+
+14. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-9. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
+15. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-10. Quit vhost ports and relaunch vhost ports with 1 queues::
+16. Quit and relaunch vhost with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
-11. On VM1, set virtio device::
+17. On VM1, set virtio device::
ethtool -L ens5 combined 1
-12. On VM2, set virtio device::
+18. On VM2, set virtio device::
ethtool -L ens5 combined 1
-13. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+19. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-14. Check the iperf performance, ensure queue0 can work from vhost side::
+20. Check the iperf performance, ensure queue0 can work from vhost side::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
-========================================================================================================================
+Test Case 6: VM2VM split ring vhost-user/virtio-net non-mergeable 8 queues CBDMA enable test with large packet payload valid check
+==================================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu 5.2.0::
@@ -383,7 +430,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -415,10 +462,12 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+7. Quit and relaunch vhost ports w/o CBDMA channels::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
8. Scp 1MB file form VM1 to VM2::
@@ -430,10 +479,12 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-10. Quit vhost ports and relaunch vhost ports with 1 queues::
+10. Quit and relaunch vhost ports with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
11. On VM1, set virtio device::
@@ -456,14 +507,16 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
==========================================================================
-1. Launch the Vhost sample by below commands::,packed=on
+1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -476,7 +529,7 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -511,14 +564,16 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic
=======================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1]' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:00:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:00:04.1]' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 on socket 1 with qemu 5.2.0::
+2. Launch VM1 and VM2 on socket 1 with qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -531,7 +586,7 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -571,11 +626,13 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 40 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -588,7 +645,7 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -626,11 +683,13 @@ Test Case 10: Check packed ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' \
+ -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0,set TSO and UFO on in qemu command::
+2. Launch VM1 and VM2 with qemu,set TSO and UFO on in qemu command::
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -643,7 +702,7 @@ Test Case 10: Check packed ring virtio-net device capability
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -671,14 +730,16 @@ Test Case 10: Check packed ring virtio-net device capability
Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test with large packet payload valid check
=====================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 with qemu 5.2.0::
+2. Launch VM1 and VM2 with qemu::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -691,7 +752,7 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -728,11 +789,13 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
=========================================================================================================================
-1. Launch the Vhost sample by below commands::
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7]' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2::
@@ -748,7 +811,7 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -781,3 +844,123 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
7. Rerun step 5-6 five times.
+
+Test Case 13: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic when set iova=pa
+=========================================================================================================
+
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@0000:00:04.0]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@0000:00:04.1]' \
+ --iova=pa -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2 on socket 1 with qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Check 2VMs can receive and send big packets to each other::
+
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
+
+Test Case 14: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable and PA mode test with large packet payload valid check
+=================================================================================================================================
+
+1. Bind 16 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.5;txq6@0000:00:04.6;txq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7]' \
+ --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+2. Launch VM1 and VM2 with qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Rerun step 5-6 five times.
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-12-06 9:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-06 9:28 [dts][PATCH V1 1/3] test_plans/vm2vm_virtio_net_perf: modify and add cases Wei Ling
-- strict thread matches above, loose matches on Subject: below --
2021-12-06 9:46 Wei Ling
2021-12-06 9:35 Wei Ling
2021-12-06 9:07 Wei Ling
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).