* [dts][PATCH V1 0/1] test_plans: rename test plan bin name
@ 2021-12-13 1:40 Yufen.Mo
2021-12-13 1:40 ` [dts][PATCH V1 1/1] " Yufen.Mo
0 siblings, 1 reply; 2+ messages in thread
From: Yufen.Mo @ 2021-12-13 1:40 UTC (permalink / raw)
To: dts; +Cc: Yufen.Mo
rename test plan bin name.
Yufen.Mo (1):
rename test plan bin name
test_plans/distributor_test_plan.rst | 6 +-
test_plans/ipfrag_test_plan.rst | 5 +-
test_plans/l2fwd_test_plan.rst | 6 +-
test_plans/l3fwd_test_plan.rst | 104 +++++++++---------
test_plans/metrics_test_plan.rst | 12 +-
test_plans/multiprocess_test_plan.rst | 32 +++---
test_plans/nic_single_core_perf_test_plan.rst | 2 +-
test_plans/ntb_test_plan.rst | 24 ++--
test_plans/nvgre_test_plan.rst | 14 +--
test_plans/packet_capture_test_plan.rst | 30 ++---
test_plans/packet_ordering_test_plan.rst | 8 +-
test_plans/performance_thread_test_plan.rst | 24 ++--
test_plans/pmd_bonded_8023ad_test_plan.rst | 14 +--
test_plans/pmd_bonded_test_plan.rst | 10 +-
test_plans/pmd_stacked_bonded_test_plan.rst | 10 +-
test_plans/pmd_test_plan.rst | 8 +-
test_plans/pmdrss_hash_test_plan.rst | 2 +-
test_plans/pmdrssreta_test_plan.rst | 6 +-
test_plans/port_control_test_plan.rst | 4 +-
test_plans/port_representor_test_plan.rst | 6 +-
test_plans/power_negative_test_plan.rst | 12 +-
21 files changed, 170 insertions(+), 169 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* [dts][PATCH V1 1/1] test_plans: rename test plan bin name
2021-12-13 1:40 [dts][PATCH V1 0/1] test_plans: rename test plan bin name Yufen.Mo
@ 2021-12-13 1:40 ` Yufen.Mo
0 siblings, 0 replies; 2+ messages in thread
From: Yufen.Mo @ 2021-12-13 1:40 UTC (permalink / raw)
To: dts; +Cc: Yufen.Mo
rename test plan bin name.
Signed-off-by: Yufen.Mo <yufengx.mo@intel.com>
---
test_plans/distributor_test_plan.rst | 6 +-
test_plans/ipfrag_test_plan.rst | 5 +-
test_plans/l2fwd_test_plan.rst | 6 +-
test_plans/l3fwd_test_plan.rst | 104 +++++++++---------
test_plans/metrics_test_plan.rst | 12 +-
test_plans/multiprocess_test_plan.rst | 32 +++---
test_plans/nic_single_core_perf_test_plan.rst | 2 +-
test_plans/ntb_test_plan.rst | 24 ++--
test_plans/nvgre_test_plan.rst | 14 +--
test_plans/packet_capture_test_plan.rst | 30 ++---
test_plans/packet_ordering_test_plan.rst | 8 +-
test_plans/performance_thread_test_plan.rst | 24 ++--
test_plans/pmd_bonded_8023ad_test_plan.rst | 14 +--
test_plans/pmd_bonded_test_plan.rst | 10 +-
test_plans/pmd_stacked_bonded_test_plan.rst | 10 +-
test_plans/pmd_test_plan.rst | 8 +-
| 2 +-
| 6 +-
test_plans/port_control_test_plan.rst | 4 +-
test_plans/port_representor_test_plan.rst | 6 +-
test_plans/power_negative_test_plan.rst | 12 +-
21 files changed, 170 insertions(+), 169 deletions(-)
diff --git a/test_plans/distributor_test_plan.rst b/test_plans/distributor_test_plan.rst
index bc27985f..1e99a037 100644
--- a/test_plans/distributor_test_plan.rst
+++ b/test_plans/distributor_test_plan.rst
@@ -53,7 +53,7 @@ Test Case: Distributor unit test
================================
Start test application and run distributor unit test::
- ./x86_64-native-linuxapp-gcc/app/test -c f -n 4
+ ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -c f -n 4
RTE>>distributor_autotest
Verify burst distributor API unit test passed
@@ -62,7 +62,7 @@ Test Case: Distributor performance unit test
============================================
Start test application and run distributor unit test::
- ./x86_64-native-linuxapp-gcc/app/test -c f -n 4
+ ./x86_64-native-linuxapp-gcc/app/test/dpdk-test -c f -n 4
RTE>>distributor_perf_autotest
Compared CPU cycles for normal distributor and burst API
@@ -87,7 +87,7 @@ Test Case: Distributor with multiple input ports
================================================
Start distributor sample with two workers and two ports::
- ./examples/distributor/build/distributor_app -c 0x7c -n 4 -- -p 0x3
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-distributor -c 0x7c -n 4 -- -p 0x3
Send packets with sequence indicated in udp port id
diff --git a/test_plans/ipfrag_test_plan.rst b/test_plans/ipfrag_test_plan.rst
index 31dcc7bc..2178b4db 100644
--- a/test_plans/ipfrag_test_plan.rst
+++ b/test_plans/ipfrag_test_plan.rst
@@ -159,7 +159,8 @@ Prerequisites
And re-compile examples/ip_fragmentation::
- make -C examples/ip_fragmentation
+ meson configure -Dexamples=ip_fragmentation x86_64-native-linuxapp-gcc
+ ninja -C x86_64-native-linuxapp-gcc
Test Case 1: IP Fragmentation normal ip packet forward
======================================================
@@ -209,5 +210,5 @@ The following configurations should be tested:
Command line::
- ./ip_fragmentation -c <LCOREMASK> -n 4 -- [-P] -p PORTMASK
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ip_fragmentation -c <LCOREMASK> -n 4 -- [-P] -p PORTMASK
-q <NUM_OF_PORTS_PER_THREAD>
diff --git a/test_plans/l2fwd_test_plan.rst b/test_plans/l2fwd_test_plan.rst
index 6bbed760..f33bf118 100644
--- a/test_plans/l2fwd_test_plan.rst
+++ b/test_plans/l2fwd_test_plan.rst
@@ -75,7 +75,7 @@ Assume port 0 and 1 are connected to the traffic generator, to run the test
application in linuxapp environment with 4 lcores, 2 ports and 8 RX queues
per lcore::
- $ ./l2fwd -n 1 -c f -- -q 8 -p 0x3
+ $ ./x86_64-native-linuxapp-gcc/examples/dpdk-l2fwd -n 1 -c f -- -q 8 -p 0x3
Also, if the ports to be tested are different, the port mask should be changed.
The lcore used to run the test application and the number of queue used for a
@@ -92,7 +92,7 @@ of the packet stream to be sent out from ``port A`` to the mac address of
from ``port B`` to the mac address of ``port 1``. Other parameters of the packet
stream could be anything valid. Then run the test application as below::
- $ ./l2fwd -n 1 -c f -- -q 8 -p 0x3
+ $ ./x86_64-native-linuxapp-gcc/examples/dpdk-l2fwd -n 1 -c f -- -q 8 -p 0x3
Trigger the packet generator of bursting packets from ``port A``, then check if
``port 0`` could receive them and ``port 1`` could forward them back. Stop it
@@ -127,7 +127,7 @@ Set the packet stream to be sent out from packet generator before testing as bel
Then run the test application as below::
- $ ./l2fwd -n 2 -c f -- -q 1 -p 0x3
+ $ ./x86_64-native-linuxapp-gcc/examples/dpdk-l2fwd -n 2 -c f -- -q 1 -p 0x3
The -n command is used to select the number of memory channels. It should match the number of memory channels on that setup.
diff --git a/test_plans/l3fwd_test_plan.rst b/test_plans/l3fwd_test_plan.rst
index a342401f..f0b4c641 100644
--- a/test_plans/l3fwd_test_plan.rst
+++ b/test_plans/l3fwd_test_plan.rst
@@ -306,55 +306,55 @@ presented in the table below. The test report should present this table with
the actual command line used, replacing the PORTMASK and C{x.y.z} with their
actual values used during test execution.
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| # | Command Line |
-+=====+=======================================================================================================================+
-| 1 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.0}),(P2,0,C{0.1.0}),(P3,0,C{0.1.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 2 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.0}),(P2,0,C{0.1.1}),(P3,0,C{0.1.1})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 3 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.0}),(P2,0,C{0.2.0}),(P3,0,C{0.2.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 4 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.1}),(P2,0,C{0.2.0}),(P3,0,C{0.2.1})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 5 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.2.0}),(P2,0,C{0.3.0}),(P3,0,C{0.4.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 6 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.0}),(P2,0,C{1.1.0}),(P3,0,C{1.1.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 7 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.1}),(P2,0,C{1.1.0}),(P3,0,C{1.1.1})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 8 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.2.0}),(P2,0,C{1.1.0}),(P3,0,C{1.2.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 9 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.0}),(P1,1,C{0.1.0}), |
-| | (P2,0,C{0.1.0}),(P2,1,C{0.1.0}),(P3,0,C{0.1.0}),(P3,1,C{0.1.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 10 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.0}),(P1,1,C{0.1.0}), |
-| | (P2,0,C{0.1.1}),(P2,1,C{0.1.1}),(P3,0,C{0.1.1}),(P3,1,C{0.1.1})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 11 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.0}),(P1,1,C{0.1.0}), |
-| | (P2,0,C{0.2.0}),(P2,1,C{0.2.0}),(P3,0,C{0.2.0}),(P3,1,C{0.2.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 12 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.1}),(P1,1,C{0.1.1}), |
-| | (P2,0,C{0.2.0}),(P2,1,C{0.2.0}),(P3,0,C{0.2.1}),(P3,1,C{0.2.1})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 13 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.2.0}),(P1,1,C{0.2.0}), |
-| | (P2,0,C{0.3.0}),(P2,1,C{0.3.0}),(P3,0,C{0.4.0}),(P3,1,C{0.4.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 14 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.1}),(P1,0,C{0.2.0}),(P1,1,C{0.2.1}), |
-| | (P2,0,C{0.3.0}),(P2,1,C{0.3.1}),(P3,0,C{0.4.0}),(P3,1,C{0.4.1})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 15 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.0}),(P1,1,C{0.1.0}), |
-| | (P2,0,C{1.1.0}),(P2,1,C{1.1.0}),(P3,0,C{1.1.0}),(P3,1,C{1.1.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 16 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.1}),(P1,1,C{0.1.1}), |
-| | (P2,0,C{1.1.0}),(P2,1,C{1.1.0}),(P3,0,C{1.1.1}),(P3,1,C{1.1.1})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 17 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.2.0}),(P1,1,C{0.2.0}), |
-| | (P2,0,C{1.1.0}),(P2,1,C{1.1.0}),(P3,0,C{1.2.0}),(P3,1,C{1.2.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 18 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.1}),(P1,0,C{0.2.0}),(P1,1,C{0.2.1}), |
-| | (P2,0,C{1.1.0}),(P2,1,C{1.1.1}),(P3,0,C{1.2.0}),(P3,1,C{1.2.1})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
-| 19 | ./l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.2.0}),(P1,0,C{0.3.0}),(P1,1,C{0.4.0}), |
-| | (P2,0,C{1.1.0}),(P2,1,C{1.2.0}),(P3,0,C{1.3.0}),(P3,1,C{1.4.0})' |
-+-----+-----------------------------------------------------------------------------------------------------------------------+
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| # | Command Line |
++=====+============================================================================================================================+
+| 1 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.0}),(P2,0,C{0.1.0}),(P3,0,C{0.1.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 2 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.0}),(P2,0,C{0.1.1}),(P3,0,C{0.1.1})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 3 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.0}),(P2,0,C{0.2.0}),(P3,0,C{0.2.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 4 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.1}),(P2,0,C{0.2.0}),(P3,0,C{0.2.1})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 5 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.2.0}),(P2,0,C{0.3.0}),(P3,0,C{0.4.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 6 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.0}),(P2,0,C{1.1.0}),(P3,0,C{1.1.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 7 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.1.1}),(P2,0,C{1.1.0}),(P3,0,C{1.1.1})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 8 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P1,0,C{0.2.0}),(P2,0,C{1.1.0}),(P3,0,C{1.2.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 9 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.0}),(P1,1,C{0.1.0}), |
+| | (P2,0,C{0.1.0}),(P2,1,C{0.1.0}),(P3,0,C{0.1.0}),(P3,1,C{0.1.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 10 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.0}),(P1,1,C{0.1.0}), |
+| | (P2,0,C{0.1.1}),(P2,1,C{0.1.1}),(P3,0,C{0.1.1}),(P3,1,C{0.1.1})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 11 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.0}),(P1,1,C{0.1.0}), |
+| | (P2,0,C{0.2.0}),(P2,1,C{0.2.0}),(P3,0,C{0.2.0}),(P3,1,C{0.2.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 12 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.1}),(P1,1,C{0.1.1}), |
+| | (P2,0,C{0.2.0}),(P2,1,C{0.2.0}),(P3,0,C{0.2.1}),(P3,1,C{0.2.1})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 13 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.2.0}),(P1,1,C{0.2.0}), |
+| | (P2,0,C{0.3.0}),(P2,1,C{0.3.0}),(P3,0,C{0.4.0}),(P3,1,C{0.4.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 14 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.1}),(P1,0,C{0.2.0}),(P1,1,C{0.2.1}), |
+| | (P2,0,C{0.3.0}),(P2,1,C{0.3.1}),(P3,0,C{0.4.0}),(P3,1,C{0.4.1})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 15 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.0}),(P1,1,C{0.1.0}), |
+| | (P2,0,C{1.1.0}),(P2,1,C{1.1.0}),(P3,0,C{1.1.0}),(P3,1,C{1.1.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 16 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.1.1}),(P1,1,C{0.1.1}), |
+| | (P2,0,C{1.1.0}),(P2,1,C{1.1.0}),(P3,0,C{1.1.1}),(P3,1,C{1.1.1})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 17 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.0}),(P1,0,C{0.2.0}),(P1,1,C{0.2.0}), |
+| | (P2,0,C{1.1.0}),(P2,1,C{1.1.0}),(P3,0,C{1.2.0}),(P3,1,C{1.2.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 18 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.1.1}),(P1,0,C{0.2.0}),(P1,1,C{0.2.1}), |
+| | (P2,0,C{1.1.0}),(P2,1,C{1.1.1}),(P3,0,C{1.2.0}),(P3,1,C{1.2.1})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
+| 19 | ./dpdk-l3fwd -c 0xffffff -n 3 -- -P -p PORTMASK --config '(P0,0,C{0.1.0}),(P0,1,C{0.2.0}),(P1,0,C{0.3.0}),(P1,1,C{0.4.0}), |
+| | (P2,0,C{1.1.0}),(P2,1,C{1.2.0}),(P3,0,C{1.3.0}),(P3,1,C{1.4.0})' |
++-----+----------------------------------------------------------------------------------------------------------------------------+
diff --git a/test_plans/metrics_test_plan.rst b/test_plans/metrics_test_plan.rst
index 6dc051e9..22c31f34 100644
--- a/test_plans/metrics_test_plan.rst
+++ b/test_plans/metrics_test_plan.rst
@@ -167,7 +167,7 @@ Test Case : test latency stats
#. Start testpmd, set it in io fwd mode::
- ./testpmd -c 0x30 -n 4 -- -i --latencystats=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 -- -i --latencystats=2
testpmd> set fwd io
testpmd> start
@@ -178,7 +178,7 @@ Test Case : test latency stats
#. run dpdk-proc to get latency stats data, query data at a average interval and
get 5 times data::
- ./app/dpdk-procinfo -- --metrics
+ ./x86_64-native-linuxapp-gcc/app/dpdk-procinfo -- --metrics
#. latency stats has no reference standard data, only check non-zero and logic reasonable value.
@@ -192,7 +192,7 @@ Test Case : test bit rate
#. Start testpmd, set it in io fwd mode::
- ./testpmd -c 0x30 -n 4 -- -i --bitrate-stats=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 -- -i --bitrate-stats=2
testpmd> set fwd io
testpmd> start
@@ -203,7 +203,7 @@ Test Case : test bit rate
#. run dpdk-proc to get latency stats data, query data at a average interval and
get 5 times data::
- ./app/dpdk-procinfo -- --metrics
+ ./x86_64-native-linuxapp-gcc/app/dpdk-procinfo -- --metrics
#. Compare dpdk statistics data with packet generator statistics data.
@@ -217,7 +217,7 @@ Test Case : test bit rate peak value
#. Start testpmd, set it in io fwd mode::
- ./testpmd -c 0x30 -n 4 -- -i --bitrate-stats=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 -- -i --bitrate-stats=2
testpmd> set fwd io
testpmd> start
@@ -228,7 +228,7 @@ Test Case : test bit rate peak value
#. run dpdk-proc to get latency stats data, query data at a average interval and
get 5 times data::
- ./app/dpdk-procinfo -- --metrics
+ ./x86_64-native-linuxapp-gcc/app/dpdk-procinfo -- --metrics
#. decline packet generator rate percent from 100%/80%/60%/20%, loop step 5/6.
diff --git a/test_plans/multiprocess_test_plan.rst b/test_plans/multiprocess_test_plan.rst
index 89abe6c2..efb7fe05 100644
--- a/test_plans/multiprocess_test_plan.rst
+++ b/test_plans/multiprocess_test_plan.rst
@@ -67,11 +67,11 @@ Test Case: Basic operation
1. To run the application, start one copy of the simple_mp binary in one terminal,
passing at least two cores in the coremask, as follows::
- ./build/simple_mp -c 3 --proc-type=primary
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-simple_mp -c 3 --proc-type=primary
The process should start successfully and display a command prompt as follows::
- $ ./build/simple_mp -c 3 --proc-type=primary
+ $ ./x86_64-native-linuxapp-gcc/examples/dpdk-simple_mp -c 3 --proc-type=primary
EAL: coremask set to 3
EAL: Detected lcore 0 on socket 0
EAL: Detected lcore 1 on socket 0
@@ -94,7 +94,7 @@ Test Case: Basic operation
2. To run the secondary process to communicate with the primary process, again run the
same binary setting at least two cores in the coremask.::
- ./build/simple_mp -c C --proc-type=secondary
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-simple_mp -c C --proc-type=secondary
Once the process type is specified correctly, the process starts up, displaying largely
similar status messages to the primary instance as it initializes. Once again, you will be
@@ -216,10 +216,10 @@ For example, to run a set of four symmetric_mp instances, running on lcores 1-4,
performing level-2 forwarding of packets between ports 0 and 1, the following
commands can be used (assuming run as root)::
- ./build/symmetric_mp -c 2 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0
- ./build/symmetric_mp -c 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1
- ./build/symmetric_mp -c 8 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2
- ./build/symmetric_mp -c 10 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-symmetric_mp -c 2 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-symmetric_mp -c 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-symmetric_mp -c 8 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-symmetric_mp -c 10 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3
To run only 1 or 2 instances, the above parameters to the 1 or 2 instances being
run should remain the same, except for the ``num-procs`` value, which should be
@@ -283,7 +283,7 @@ The command line below is an example on how to start the server process on
logical core 2 to handle a maximum of 8 client processes configured to
run on socket 0 to handle traffic from NIC ports 0 and 1::
- root@host:mp_server# ./build/mp_server -c 2 -- -p 3 -n 8
+ root@host:mp_server# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_server -c 2 -- -p 3 -n 8
NOTE: If an additional second core is given in the coremask to the server process
that second core will be used to print statistics. When benchmarking, only a
@@ -297,14 +297,14 @@ Run the Client application:
An example commands to run 8 client processes is as follows::
- root@host:mp_client# ./build/mp_client -c 40 --proc-type=secondary -- -n 0 &
- root@host:mp_client# ./build/mp_client -c 100 --proc-type=secondary -- -n 1 &
- root@host:mp_client# ./build/mp_client -c 400 --proc-type=secondary -- -n 2 &
- root@host:mp_client# ./build/mp_client -c 1000 --proc-type=secondary -- -n 3 &
- root@host:mp_client# ./build/mp_client -c 4000 --proc-type=secondary -- -n 4 &
- root@host:mp_client# ./build/mp_client -c 10000 --proc-type=secondary -- -n 5 &
- root@host:mp_client# ./build/mp_client -c 40000 --proc-type=secondary -- -n 6 &
- root@host:mp_client# ./build/mp_client -c 100000 --proc-type=secondary -- -n 7 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 40 --proc-type=secondary -- -n 0 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 100 --proc-type=secondary -- -n 1 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 400 --proc-type=secondary -- -n 2 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 1000 --proc-type=secondary -- -n 3 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 4000 --proc-type=secondary -- -n 4 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 10000 --proc-type=secondary -- -n 5 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 40000 --proc-type=secondary -- -n 6 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 100000 --proc-type=secondary -- -n 7 &
Test Case: Performance Measurement
----------------------------------
diff --git a/test_plans/nic_single_core_perf_test_plan.rst b/test_plans/nic_single_core_perf_test_plan.rst
index 9fc5e01a..7f86312f 100644
--- a/test_plans/nic_single_core_perf_test_plan.rst
+++ b/test_plans/nic_single_core_perf_test_plan.rst
@@ -76,7 +76,7 @@ Test Case : Single Core Performance Measurement
2) Start testpmd::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4 -- -i \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i \
--portmask=0xf --txd=128 --rxd=128
testpmd> start
diff --git a/test_plans/ntb_test_plan.rst b/test_plans/ntb_test_plan.rst
index e8e2896d..b71ed97f 100644
--- a/test_plans/ntb_test_plan.rst
+++ b/test_plans/ntb_test_plan.rst
@@ -106,13 +106,13 @@ Test Case1: NTB test with file-trans fwd mode using igb_uio
2. Launch ntb_fwd sample on Machine1::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --buf-size=65407
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --buf-size=65407
>set fwd file-trans
>start
3. Launch ntb_fwd sample on Machine2::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --buf-size=65407
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --buf-size=65407
>set fwd file-trans
>start
@@ -136,12 +136,12 @@ Test Case2: NTB test with file-trans fwd mode using vfio-pci
2. Launch ntb_fwd sample on Machine1::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --buf-size=65407
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --buf-size=65407
>set fwd file-trans
3. Launch ntb_fwd sample on Machine2::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --buf-size=65407
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --buf-size=65407
>set fwd file-trans
4. Send file from Machine1::
@@ -160,14 +160,14 @@ Test Case3: NTB test with rxonly/txonly fwd mode using igb_uio
2. Launch ntb_fwd sample on Machine1::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --buf-size=65407
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --buf-size=65407
>set fwd rxonly
>start
>show port stats
3. Launch ntb_fwd sample on Machine2::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --buf-size=65407
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --buf-size=65407
>set fwd txonly
>start
>show port stats
@@ -188,14 +188,14 @@ Test Case4: NTB test with rxonly/txonly fwd mode using vfio-pci
2. Launch ntb_fwd sample on Machine1::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --buf-size=65407
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --buf-size=65407
>set fwd rxonly
>start
>show port stats
3. Launch ntb_fwd sample on Machine2::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --buf-size=65407
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --buf-size=65407
>set fwd txonly
>start
>show port stats
@@ -214,14 +214,14 @@ Test flow: TG <-> NIC1 <-> NTB1 <-> NTB2 <-> NIC2 <-> TG
2. Launch ntb_fwd sample on Machine1::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --fwd-mode=iofwd --burst=32
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --fwd-mode=iofwd --burst=32
>set fwd iofwd
>start
>show port stats
3. Launch ntb_fwd sample on Machine2::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --fwd-mode=iofwd --burst=32
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --fwd-mode=iofwd --burst=32
>set fwd iofwd
>start
>show port stats
@@ -244,14 +244,14 @@ Test flow: TG <-> NIC1 <-> NTB1 <-> NTB2 <-> NIC2 <-> TG
2. Launch ntb_fwd sample on Machine1::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --fwd-mode=iofwd --burst=32
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --fwd-mode=iofwd --burst=32
>set fwd iofwd
>start
>show port stats
3. Launch ntb_fwd sample on Machine2::
- ./examples/ntb/build/ntb_fwd -l 28-32 -n 6 -- -i --fwd-mode=iofwd --burst=32
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-ntb -l 28-32 -n 6 -- -i --fwd-mode=iofwd --burst=32
>set fwd iofwd
>start
>show port stats
diff --git a/test_plans/nvgre_test_plan.rst b/test_plans/nvgre_test_plan.rst
index 015182a8..c05292ee 100644
--- a/test_plans/nvgre_test_plan.rst
+++ b/test_plans/nvgre_test_plan.rst
@@ -63,7 +63,7 @@ Test Case: NVGRE ipv4 packet detect
Start testpmd with tunneling packet type to NVGRE::
- testpmd -c 0xffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set rxonly packet forwarding mode and enable verbose log::
@@ -96,7 +96,7 @@ Test Case: NVGRE ipv6 packet detect
Start testpmd with tunneling packet type to NVGRE::
- testpmd -c 0xffff -n 2 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xffff -n 2 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set rxonly packet forwarding mode and enable verbose log::
@@ -133,7 +133,7 @@ command line and the packet is sent again.
Start testpmd::
- testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set rxonly packet forwarding mode and enable verbose log::
@@ -181,7 +181,7 @@ result.
Start testpmd::
- testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set rxonly packet forwarding mode and enable verbose log::
@@ -217,7 +217,7 @@ command line and the packet is sent again.
Start testpmd::
- testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set rxonly packet forwarding mode and enable verbose log::
@@ -266,7 +266,7 @@ forwarded packet and checks the forwarded packet checksum correct or not.
Start testpmd with tunneling packet type to NVGRE::
- testpmd -c 0xffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --enable-rx-cksum
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --enable-rx-cksum
Set csum packet forwarding mode and enable verbose log::
@@ -309,7 +309,7 @@ forwarded packet and checks the forwarded packet checksum correct or not.
Start testpmd with tunneling packet type::
- testpmd -c ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --enable-rx-cksum
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --enable-rx-cksum
Set csum packet forwarding mode and enable verbose log::
diff --git a/test_plans/packet_capture_test_plan.rst b/test_plans/packet_capture_test_plan.rst
index 2f38b60a..e2be1430 100644
--- a/test_plans/packet_capture_test_plan.rst
+++ b/test_plans/packet_capture_test_plan.rst
@@ -117,7 +117,7 @@ square brackets represents optional
parameters::
- ./app/dpdk-pdump -- --pdump=
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-pdump -- --pdump=
'(port = <port_id> |device_id = <pci address>),
(queue=<queue number>),
(rx-dev=<iface/path to pcap file> | tx-dev=<iface/path to pcap file>),
@@ -204,7 +204,7 @@ steps:
#. Boot up dpdk's testpmd with chained option::
- ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --port-topology=chained
testpmd> set fwd io
testpmd> start
@@ -215,7 +215,7 @@ steps:
#. Boot up dpdk-pdump::
- ./app/dpdk-pdump -- --pdump '<port option>,queue=*,\
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-pdump -- --pdump '<port option>,queue=*,\
tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap'
#. Set up linux's tcpdump to receiver packet on tester::
@@ -257,7 +257,7 @@ steps:
#. Boot up dpdk's testpmd with chained option::
- ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --port-topology=chained
testpmd> set fwd io
testpmd> start
@@ -268,7 +268,7 @@ steps:
#. Boot up dpdk-pdump::
- ./app/dpdk-pdump -- --pdump 'port=0,<queue option>,\
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-pdump -- --pdump 'port=0,<queue option>,\
tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap'
#. Set up linux's tcpdump to receiver packet on tester::
@@ -311,7 +311,7 @@ steps:
#. Boot up dpdk's testpmd with chained option::
- ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --port-topology=chained
testpmd> set fwd io
testpmd> start
@@ -322,7 +322,7 @@ steps:
#. Boot up dpdk-pdump with pdump options::
- ./app/dpdk-pdump -- --pdump 'port=0,queue=*,<dump object>'
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-pdump -- --pdump 'port=0,queue=*,<dump object>'
#. Set up linux's tcpdump to receiver packet on tester::
@@ -366,7 +366,7 @@ steps:
#. Boot up dpdk's testpmd with chained option::
- ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --port-topology=chained
testpmd> set fwd io
testpmd> start
@@ -377,7 +377,7 @@ steps:
#. Boot up dpdk-pdump with pdump options::
- ./app/dpdk-pdump -- --pdump 'port=0,queue=*,<dump object>'
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-pdump -- --pdump 'port=0,queue=*,<dump object>'
#. Set up linux's tcpdump to receiver packet on tester::
@@ -420,7 +420,7 @@ steps:
#. Boot up dpdk's testpmd with chained option::
- ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --port-topology=chained
testpmd> set fwd io
testpmd> start
@@ -431,7 +431,7 @@ steps:
#. Boot up dpdk-pdump with pdump options::
- ./app/dpdk-pdump -- --pdump 'port=0,queue=*,\
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-pdump -- --pdump 'port=0,queue=*,\
tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,ring-size=1024'
#. Set up linux's tcpdump to receiver packet on tester::
@@ -469,7 +469,7 @@ steps:
#. Boot up dpdk's testpmd with chained option::
- ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --port-topology=chained
testpmd> set fwd io
testpmd> start
@@ -480,7 +480,7 @@ steps:
#. Boot up dpdk-pdump with pdump options::
- ./app/dpdk-pdump -- --pdump 'port=0,queue=*,\
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-pdump -- --pdump 'port=0,queue=*,\
tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,mbuf-size=2048'
#. Set up linux's tcpdump to receiver packet on tester::
@@ -517,7 +517,7 @@ steps:
#. Boot up dpdk's testpmd with chained option::
- ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --port-topology=chained
testpmd> set fwd io
testpmd> start
@@ -528,7 +528,7 @@ steps:
#. Boot up dpdk-pdump with pdump options::
- ./app/dpdk-pdump -- --pdump 'port=0,queue=*,\
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-pdump -- --pdump 'port=0,queue=*,\
tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,total-num-mbufs=8191'
#. Set up linux's tcpdump to receiver packet on tester::
diff --git a/test_plans/packet_ordering_test_plan.rst b/test_plans/packet_ordering_test_plan.rst
index 193aff41..6b39025c 100644
--- a/test_plans/packet_ordering_test_plan.rst
+++ b/test_plans/packet_ordering_test_plan.rst
@@ -52,14 +52,14 @@ Workers-TX is done by using rings. The flow of mbufs is the following:
Command Usage::
- ./packet_ordering [EAL options] -- [-p PORTMASK] [--insight-worker]
+ ./dpdk-packet_ordering [EAL options] -- [-p PORTMASK] [--insight-worker]
-p PORTMASK : hexadecimal bitmask of ports to configure
--insight-worker : print per core stats
For example::
- ./packet_ordering -l 30-35 -- -p 0x1 --insight-worker
+ ./dpdk-packet_ordering -l 30-35 -- -p 0x1 --insight-worker
RX thread stats:
- Pkts rxd: 17026944
@@ -151,7 +151,7 @@ Reordered ratio: ratio between out of order packets and total sent packets.
Run the app with below sample command::
- ./examples/packet_ordering/build/packet_ordering -c coremask -- -p portmask
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-packet_ordering -c coremask -- -p portmask
Test Case: keep the packet ordering
===================================
@@ -162,7 +162,7 @@ app is ordering.
1. Run the sample with below command::
- ./examples/packet_ordering/build/packet_ordering -c coremask -- -p portmask
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-packet_ordering -c coremask -- -p portmask
2. Send 1000 packets with the same 5-tuple traffic from Scapy
diff --git a/test_plans/performance_thread_test_plan.rst b/test_plans/performance_thread_test_plan.rst
index 33ef9bc7..fbed69f0 100644
--- a/test_plans/performance_thread_test_plan.rst
+++ b/test_plans/performance_thread_test_plan.rst
@@ -80,7 +80,7 @@ Prerequisites
4. The application options to be used in below test cases are listed as well as the
general description.::
- ./build/l3fwd-thread [EAL options] -- \
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-thread [EAL options] -- \
-p PORTMASK [-P]
--rx(port,queue,lcore,thread)[,(port,queue,lcore,thread)]
--tx(lcore,thread)[,(lcore,thread)]
@@ -129,7 +129,7 @@ Test Case: one_lcore_per_pcore performance
1. Launch app with descriptor parameters::
- ./examples/performance-thread/l3fwd-thread/x86_64-native-linuxapp-gcc/l3fwd-thread \
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-thread \
-c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \
--rx="(0,0,0,0)(1,0,0,0)" --tx="(1,0)" --no-lthread
@@ -142,15 +142,15 @@ Test Case: one_lcore_per_pcore performance
+-----+---------------------------------------------------------------------------------------------------+
| # | Command Line |
+=====+===================================================================================================+
- | 1 | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
+ | 1 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(1,0,1,1) --tx="(2,0)(3,1) \ |
| | --no-lthread |
+-----+---------------------------------------------------------------------------------------------------+
- | 2 | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
+ | 2 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(0,1,1,1)(1,0,2,2)(1,1,3,3)" \ |
| | --tx="(4,0)(5,1)(6,2)(7,3)" --no-lthread |
+-----+---------------------------------------------------------------------------------------------------+
- | 3 | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
+ | 3 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(0,1,1,1)(0,2,2,2)(0,3,3,3)(1,0,4,4)(1,1,5,5)(1,2,6,6)(1,3,7,7)" \ |
| | --tx="(8,0)(9,1)(10,2)(11,3)(12,4)(13,5)(14,6)(15,7)" \ |
| | --no-lthread |
@@ -177,15 +177,15 @@ Test Case: n_lcore_per_pcore performance
+-----+---------------------------------------------------------------------------------------------------+
| # | Command Line |
+=====+===================================================================================================+
- | 1 | ./l3fwd-thread -n 4 --lcores="(0-3)@0,4" -- -P -p 3 --max-pkt-len 2500 \ |
+ | 1 | ./dpdk-l3fwd-thread -n 4 --lcores="(0-3)@0,4" -- -P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(1,0,1,1) --tx="(2,0)(3,1) \ |
| | --no-lthread |
+-----+---------------------------------------------------------------------------------------------------+
- | 2 | ./l3fwd-thread -n 4 --lcores="(0-7)@0,8" -- -P -p 3-P -p 3 --max-pkt-len 2500 \ |
+ | 2 | ./dpdk-l3fwd-thread -n 4 --lcores="(0-7)@0,8" -- -P -p 3-P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(0,1,1,1)(1,0,2,2)(1,1,3,3)" \ |
| | --tx="(4,0)(5,1)(6,2)(7,3)" --no-lthread |
+-----+---------------------------------------------------------------------------------------------------+
- | 3 | ./l3fwd-thread -n 4 --lcores="(0-15)@0,16" -- -P -p 3 --max-pkt-len 2500 \ |
+ | 3 | ./dpdk-l3fwd-thread -n 4 --lcores="(0-15)@0,16" -- -P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(0,1,1,1)(0,2,2,2)(0,3,3,3)(1,0,4,4)(1,1,5,5)(1,2,6,6)(1,3,7,7)" \ |
| | --tx="(8,0)(9,1)(10,2)(11,3)(12,4)(13,5)(14,6)(15,7)" \ |
| | --no-lthread |
@@ -199,7 +199,7 @@ Test Case: n_lthread_per_pcore performance
1. Launch app with descriptor parameters::
- ./examples/performance-thread/l3fwd-thread/x86_64-native-linuxapp-gcc/l3fwd-thread \
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-thread \
-c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \
----tx="(0,0)" --tx="(0,0)"
@@ -212,14 +212,14 @@ Test Case: n_lthread_per_pcore performance
+-----+---------------------------------------------------------------------------------------------------+
| # | Command Line |
+=====+===================================================================================================+
- | 1 | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
+ | 1 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(1,0,1,1) --tx="(0,0),(0,1)" |
+-----+---------------------------------------------------------------------------------------------------+
- | 2 | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
+ | 2 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(0,1,0,1)(1,0,0,2)(1,1,0,3)" \ |
| | --tx="(0,0)(0,1)(0,2)(0,3)" |
+-----+---------------------------------------------------------------------------------------------------+
- | 3 | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
+ | 3 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
| | --rx="(0,0,0,0)(0,1,0,1)(0,2,0,2)(0,3,0,3)(1,0,0,4)(1,1,0,5)(1,2,0,6)(1,3,0,7)" \ |
| | --tx="(0,0)(0,1)(0,2)(0,3)(0,4)(0,5)(0,6)(0,7)" \ |
+-----+---------------------------------------------------------------------------------------------------+
diff --git a/test_plans/pmd_bonded_8023ad_test_plan.rst b/test_plans/pmd_bonded_8023ad_test_plan.rst
index 9a9b2fdc..bb5961fb 100644
--- a/test_plans/pmd_bonded_8023ad_test_plan.rst
+++ b/test_plans/pmd_bonded_8023ad_test_plan.rst
@@ -115,7 +115,7 @@ steps
#. boot up testpmd::
- ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
#. run testpmd command of bonding::
@@ -157,7 +157,7 @@ steps
#. boot up testpmd::
- ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
#. run testpmd command of bonding::
@@ -200,7 +200,7 @@ steps
#. boot up testpmd::
- ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
#. run testpmd command of bonding::
@@ -247,7 +247,7 @@ steps
#. boot up testpmd::
- ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
#. run testpmd command of bonding::
@@ -302,7 +302,7 @@ steps
#. boot up testpmd::
- ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
#. run testpmd command of bonding::
@@ -349,7 +349,7 @@ steps
#. boot up testpmd::
- ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX
#. run testpmd command of bonding::
@@ -402,7 +402,7 @@ steps
#. boot up testpmd ::
- ./testpmd -c 0x0f -n 4 \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 \
--vdev 'net_bonding0,slave=0000:xx:00.0,slave=0000:xx:00.1,mode=4,agg_mode=<agg_option>' \
-- -i --port-topology=chained
diff --git a/test_plans/pmd_bonded_test_plan.rst b/test_plans/pmd_bonded_test_plan.rst
index 9a266fa1..52ba55ad 100644
--- a/test_plans/pmd_bonded_test_plan.rst
+++ b/test_plans/pmd_bonded_test_plan.rst
@@ -122,7 +122,7 @@ Use Setup#1.
Create bonded device, add first slave, verify default bonded device has default mode 0 and default primary slave.Below are the sample commands and output::
- ./app/testpmd -c f -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i
.....
Port 0 Link Up - speed 10000 Mbps - full-duplex
Port 1 Link Up - speed 10000 Mbps - full-duplex
@@ -183,7 +183,7 @@ Use Setup#1.
Create bonded device, add one slave, verify bonded device MAC address is the slave's MAC::
- ./app/testpmd -c f -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i
.....
Port 0 Link Up - speed 10000 Mbps - full-duplex
Port 1 Link Up - speed 10000 Mbps - full-duplex
@@ -272,7 +272,7 @@ Use Setup#1.
Create bonded device, add 3 slaves. Set promiscuous mode on bonded eth dev. Verify all slaves of bonded device are changed to promiscuous mode::
- ./app/testpmd -c f -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i
.....
Port 0 Link Up - speed 10000 Mbps - full-duplex
Port 1 Link Up - speed 10000 Mbps - full-duplex
@@ -331,7 +331,7 @@ Verify that traffic is distributed equally in a round robin manner through ports
The sum of the packets received on ports A-C should equal the total packets sent from port D.
The sum of the packets transmitted on ports 1-3 should equal the total packets transmitted from port 5 and received on port 4::
- ./app/testpmd -c f -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i
....
testpmd> create bonded device 0 1
@@ -447,7 +447,7 @@ Bi-directional flow: Use IXIA to generate traffic to non bonded eth dev(port3) a
Try to check that if port0 is link down, port1 can be backup quickly and re-check the performance at port1 and port3's mapped IXIA ports' RX::
- ./app/testpmd -c f -n 4 -- -i --burst=32 --rxfreet=32 --mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32 --tx-offloads=0x0
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i --burst=32 --rxfreet=32 --mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32 --tx-offloads=0x0
testpmd> create bonded device 1 0
testpmd> add bonding slave 0 4
testpmd> add bonding slave 1 4
diff --git a/test_plans/pmd_stacked_bonded_test_plan.rst b/test_plans/pmd_stacked_bonded_test_plan.rst
index a864f1fc..5b4c8563 100644
--- a/test_plans/pmd_stacked_bonded_test_plan.rst
+++ b/test_plans/pmd_stacked_bonded_test_plan.rst
@@ -108,7 +108,7 @@ steps
#. boot up testpmd, stop all ports::
- ./testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
testpmd> port stop all
#. create first bonded port and add one slave, check bond 2 config status::
@@ -173,7 +173,7 @@ steps
#. boot up testpmd, stop all ports::
- ./testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
testpmd> port stop all
#. create first bonded port and add one port as slave::
@@ -229,7 +229,7 @@ steps
#. boot up testpmd, stop all ports::
- ./testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
testpmd> port stop all
#. create first bonded port and add two ports as slaves::
@@ -296,7 +296,7 @@ steps
#. boot up testpmd, stop all ports::
- ./testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
testpmd> port stop all
#. create first bonded port and add one port as slave::
@@ -352,7 +352,7 @@ steps
#. boot up testpmd, stop all ports::
- ./testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --tx-offloads=<0xXXXX>
testpmd> port stop all
#. create first bonded port and add two ports as slaves, set portA 0a down::
diff --git a/test_plans/pmd_test_plan.rst b/test_plans/pmd_test_plan.rst
index 58be7d51..7b7d994f 100644
--- a/test_plans/pmd_test_plan.rst
+++ b/test_plans/pmd_test_plan.rst
@@ -92,7 +92,7 @@ Test Case: Packet Checking
#. Start testpmd and start forwarding::
- ./testpmd -c 0xf0 -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -- -i
testpmd> start
#. The tester sends packets with different sizes (64, 65, 128, 256, 512, 1024, 1280 and 1518 bytes)
@@ -119,7 +119,7 @@ Test Case: Descriptors Checking
#. Start testpmd with descriptor parameters::
- ./testpmd -c 0xf0 -n 4 -- -i--rxd={rxd} --txd={txd}
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -- -i--rxd={rxd} --txd={txd}
#. The tester sends packets with different sizes (64, 65, 128, 256, 512, 1024, 1280 and 1518 bytes)
for different values of rxd and txd (128,,256, 512, 1024, 2048 and 4096)
@@ -164,7 +164,7 @@ Test steps:
#. Start testpmd and start io forwading::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1800000000 -n 4 -- -i--portmask=0x3 -txd=2048 --rxd=2048 --txq=2 --rxq=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1800000000 -n 4 -- -i--portmask=0x3 -txd=2048 --rxd=2048 --txq=2 --rxq=2
#. The tester send packets which will be forwarded by the DUT, record the perfromance numbers.
@@ -229,7 +229,7 @@ settings given in the following:
#. Start testpmd and start io forwading with the above parameters.
For example, 1S/1C/2T::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x2000000000000030000000 -n 4 -- -i \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x2000000000000030000000 -n 4 -- -i \
--portmask=0x3 --txd=512 --rxd=512 --burst=32 --txpt=36 --txht=0 --txwt=0 \
--txfreet=32 --rxfreet=64 --txrst=32 --mbcache=128 --nb-cores=2 --rxq=2 --txq=2
--git a/test_plans/pmdrss_hash_test_plan.rst b/test_plans/pmdrss_hash_test_plan.rst
index 777115bf..544d2e51 100644
--- a/test_plans/pmdrss_hash_test_plan.rst
+++ b/test_plans/pmdrss_hash_test_plan.rst
@@ -77,7 +77,7 @@ Testpmd configuration - 16 RX/TX queues per port
#. set up testpmd with fortville NICs::
- ./testpmd -c fffff -n %d -- -i --coremask=0xffffe --rxq=16 --txq=16
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c fffff -n %d -- -i --coremask=0xffffe --rxq=16 --txq=16
#. Reta Configuration. 128 reta entries configuration::
--git a/test_plans/pmdrssreta_test_plan.rst b/test_plans/pmdrssreta_test_plan.rst
index 09f69c15..dd9f1ca1 100644
--- a/test_plans/pmdrssreta_test_plan.rst
+++ b/test_plans/pmdrssreta_test_plan.rst
@@ -92,7 +92,7 @@ Testpmd configuration - 2 RX/TX queues per port
::
- testpmd -c ffffff -n 3 -b 0000:05:00.1 -- -i --rxd=512 --txd=512 --burst=32 \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c ffffff -n 3 -b 0000:05:00.1 -- -i --rxd=512 --txd=512 --burst=32 \
--txpt=36 --txht=0 --txwt=0 --txfreet=32 --rxfreet=64 --txrst=32 --mbcache=128 \
--rxq=2 --txq=2
@@ -101,7 +101,7 @@ Testpmd configuration - 9 RX/TX queues per port
::
- testpmd -c ffffff -n 3 -b 0000:05:00.1 -- -i --rxd=512 --txd=512 --burst=32 \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c ffffff -n 3 -b 0000:05:00.1 -- -i --rxd=512 --txd=512 --burst=32 \
--txpt=36 --txht=0 --txwt=0 --txfreet=32 --rxfreet=64 --txrst=32 --mbcache=128 \
--rxq=9 --txq=9
@@ -110,7 +110,7 @@ Testpmd configuration - 16 RX/TX queues per port
::
- testpmd -c ffffff -n 3 -b 0000:05:00.1 -- -i --rxd=512 --txd=512 --burst=32 \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c ffffff -n 3 -b 0000:05:00.1 -- -i --rxd=512 --txd=512 --burst=32 \
--txpt=36 --txht=0 --txwt=0 --txfreet=32 --rxfreet=64 --txrst=32 --mbcache=128 \
--rxq=16 --txq=16
diff --git a/test_plans/port_control_test_plan.rst b/test_plans/port_control_test_plan.rst
index 2fca8fd7..532d363a 100644
--- a/test_plans/port_control_test_plan.rst
+++ b/test_plans/port_control_test_plan.rst
@@ -56,7 +56,7 @@ Test Case: pf start/stop/reset/close
2. Run testpmd::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xff -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xff -n 4 -- -i
testpmd> set fwd mac
testpmd> start
@@ -173,7 +173,7 @@ Test Case: e1000 emulated device start/stop/reset/close
start testpmd::
./usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -- -i
testpmd-> set fwd mac
testpmd-> start
diff --git a/test_plans/port_representor_test_plan.rst b/test_plans/port_representor_test_plan.rst
index 5f6ff1ce..5bbdfd09 100644
--- a/test_plans/port_representor_test_plan.rst
+++ b/test_plans/port_representor_test_plan.rst
@@ -59,13 +59,13 @@ Create two VFs and two VFs representor ports which are used as control plane.
4. start a testpmd with create 2 VFs representor ports as control plane named testpmd-pf::
- ./testpmd --lcores 1,2 -n 4 -a af:00.0,representor=0-1 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores 1,2 -n 4 -a af:00.0,representor=0-1 --socket-mem 1024,1024 \
--proc-type auto --file-prefix testpmd-pf -- -i --port-topology=chained
5. start two testpmd as dataplane named testpmd-vf0/testpmd-vf1(case 3 run later)::
- ./testpmd --lcores 3,4 -n 4 -a af:02.0 --socket-mem 1024,1024 --proc-type auto --file-prefix testpmd-vf0 -- -i
- ./testpmd --lcores 5,6 -n 4 -a af:02.1 --socket-mem 1024,1024 --proc-type auto --file-prefix testpmd-vf1 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores 3,4 -n 4 -a af:02.0 --socket-mem 1024,1024 --proc-type auto --file-prefix testpmd-vf0 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores 5,6 -n 4 -a af:02.1 --socket-mem 1024,1024 --proc-type auto --file-prefix testpmd-vf1 -- -i
Note: Every case needs to restart testpmd.
diff --git a/test_plans/power_negative_test_plan.rst b/test_plans/power_negative_test_plan.rst
index 76563683..bf2cfebf 100644
--- a/test_plans/power_negative_test_plan.rst
+++ b/test_plans/power_negative_test_plan.rst
@@ -53,7 +53,7 @@ Step 1. Create powermonitor fold for vm_power_manager sample::
Step 2. Luanch VM power manager sample::
- ./examples/vm_power_manager/build/vm_power_mgr -l 1-3 -n 4 --file-prefix=test1 --no-pci
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-vm_power_manager -l 1-3 -n 4 --file-prefix=test1 --no-pci
Step 3. Prepare policy in JSON format then send it to the fifo channel:
Prepare different command in JSON format then send it to the fifo channel
@@ -84,7 +84,7 @@ Step 1. Create powermonitor fold for vm_power_manager sample::
Step 2. Luanch VM power manager sample::
- ./examples/vm_power_manager/build/vm_power_mgr -l 1-3 -n 4 --file-prefix=test1 --no-pci
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-vm_power_manager -l 1-3 -n 4 --file-prefix=test1 --no-pci
Step 3. Prepare policy in JSON format then send it to the fifo channel:
@@ -118,7 +118,7 @@ Note: For the VM xml file which will be used for creating the VM, it can re-use
Step 2. Luanch VM power manager sample on the host to monitor the channel from VM::
- ./examples/vm_power_manager/build/vm_power_mgr -l 12-14 -n 4 --no-pci
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-vm_power_manager -l 12-14 -n 4 --no-pci
> add_vm [vm name]
> add_channels [vm name] all
> set_channel_status [vm name] all enabled
@@ -133,7 +133,7 @@ Check point: No crash should be occur at vm_power_mgr sample
Step 3. In the VM, launch guest_vm_power_mgr to set and send the power manager policy to the host power sample::
- ./examples/vm_power_manager/guest_cli/build/guest_vm_power_mgr -c 0xff -n 4 -m 1024 --no-pci --file-prefix=yaolei \
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-guest_cli -c 0xff -n 4 -m 1024 --no-pci --file-prefix=yaolei \
-- --vm-name=ubuntu --vcpu-list=0-7
> set_cpu_freq 128 down
> set_cpu_freq 1000000000000 down
@@ -149,11 +149,11 @@ Test Case4: TRAFFIC Policy Test based on JSON configure file with large integer
Step 1. Generate 1 VF under vfio-pci driver, launch vm_power_mgr sample with PF, for example::
echo 1 > /sys/bus/pci/drivers/vfio-pci/0000\:82\:00.0/max_vfs
- ./examples/vm_power_manager/build/vm_power_mgr -l 1-4 -n 4 --socket-mem=1024,1024 --file-prefix=test1 -a 82:00.0 -- -p 0x01
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-vm_power_manager -l 1-4 -n 4 --socket-mem=1024,1024 --file-prefix=test1 -a 82:00.0 -- -p 0x01
Step 2. Launch testpmd with VF::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 5-6 -n 4 --socket-mem=1024,1024 --file-prefix=test2 -a 0000:82:02.0 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --socket-mem=1024,1024 --file-prefix=test2 -a 0000:82:02.0 -- -i
> set fwd macswap
> start
--
2.21.0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-12-13 1:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-13 1:40 [dts][PATCH V1 0/1] test_plans: rename test plan bin name Yufen.Mo
2021-12-13 1:40 ` [dts][PATCH V1 1/1] " Yufen.Mo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).