From: Yaqi Tang <yaqi.tang@intel.com>
To: dts@dpdk.org
Cc: Yaqi Tang <yaqi.tang@intel.com>
Subject: [dts][PATCH V1] tests/cvl_qinq: add test cases for cvl qinq switch filter support l4
Date: Fri, 17 Dec 2021 16:47:53 +0000 [thread overview]
Message-ID: <20211217164753.618775-1-yaqi.tang@intel.com> (raw)
CVL Support l4 for QinQ switch filter in DCF driver, and port can support as eth / vlan / vlan / IP / tcp|udp.
Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
Tested-by: Yaqi Tang < yaqi.tang@intel.com>
---
tests/TestSuite_cvl_qinq.py | 91 ++++++++++++++++++++++++++++++++++++-
1 file changed, 90 insertions(+), 1 deletion(-)
diff --git a/tests/TestSuite_cvl_qinq.py b/tests/TestSuite_cvl_qinq.py
index 39d590f6..58b900e2 100644
--- a/tests/TestSuite_cvl_qinq.py
+++ b/tests/TestSuite_cvl_qinq.py
@@ -215,6 +215,77 @@ mac_qinq_pppoe_ipv6_dest_mac = {
mac_qinq_pppoe_ipv6 = [mac_qinq_pppoe_ipv6_src_ip, mac_qinq_pppoe_ipv6_dst_ip, mac_qinq_pppoe_ipv6_dest_mac]
+#Non-pipeline mode
+tv_mac_qinq_ipv4 = {
+ 'name': 'tv_mac_qinq_ipv4',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.3", dst="192.168.1.2")/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tv_mac_qinq_ipv6 = {
+ 'name': 'tv_mac_qinq_ipv6',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tv_mac_qinq_ipv4_udp = {
+ 'name': 'tv_mac_qinq_ipv4_udp',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=22)/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tv_mac_qinq_ipv4_tcp = {
+ 'name': 'tv_mac_qinq_ipv4_tcp',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=22)/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tvs_mac_l4_qinq_dcf_non_pipeline_mode = [tv_mac_qinq_ipv4, tv_mac_qinq_ipv6, tv_mac_qinq_ipv4_udp, tv_mac_qinq_ipv4_tcp]
+
+#Pipeline mode
+tv_mac_qinq_ipv6_udp = {
+ 'name': 'tv_mac_qinq_ipv6_udp',
+ 'rule': 'flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=50,dport=22)/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tv_mac_qinq_ipv6_tcp = {
+ 'name': 'tv_mac_qinq_ipv6_tcp',
+ 'rule': 'flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=50,dport=22)/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tvs_mac_l4_qinq_dcf_pipeline_mode = [tv_mac_qinq_ipv6_udp, tv_mac_qinq_ipv6_tcp]
class TestCvlQinq(TestCase):
@@ -505,6 +576,24 @@ class TestCvlQinq(TestCase):
self.launch_testpmd()
self._rte_flow_validate_pattern(mac_qinq_pppoe_ipv6)
+ @skip_unsupported_pkg('os default')
+ def test_mac_l4_qinq_dcf_non_pipeline_mode(self):
+ """
+ DCF switch for MAC_L4_QINQ
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(tvs_mac_l4_qinq_dcf_non_pipeline_mode)
+
+ @skip_unsupported_pkg('os default')
+ def test_mac_l4_qinq_dcf_pipeline_mode(self):
+ """
+ DCF switch for MAC_L4_QINQ_IPV6
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(tvs_mac_l4_qinq_dcf_pipeline_mode)
+
def reset_vf(self):
self.pmd_output.execute_cmd("port stop 2")
self.pmd_output.execute_cmd("port reset 2")
--
2.25.1
reply other threads:[~2021-12-17 8:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211217164753.618775-1-yaqi.tang@intel.com \
--to=yaqi.tang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).