From: Weiyuan Li <weiyuanx.li@intel.com>
To: dts@dpdk.org, lijuan.tu@intel.com
Cc: Weiyuan Li <weiyuanx.li@intel.com>
Subject: [dts][PATCH V1 1/2] tests/userspace_ethtool: remove duplicate vlan test case.
Date: Fri, 11 Feb 2022 10:28:12 +0800 [thread overview]
Message-ID: <20220211022813.2144206-1-weiyuanx.li@intel.com> (raw)
This vlan test case is repeated.
Remove the test case.
Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---
tests/TestSuite_userspace_ethtool.py | 68 ++++------------------------
1 file changed, 9 insertions(+), 59 deletions(-)
diff --git a/tests/TestSuite_userspace_ethtool.py b/tests/TestSuite_userspace_ethtool.py
index 4f104dca..9e3bbc19 100755
--- a/tests/TestSuite_userspace_ethtool.py
+++ b/tests/TestSuite_userspace_ethtool.py
@@ -322,7 +322,7 @@ class TestUserspaceEthtool(TestCase):
intf = self.tester.get_interface(tester_port)
ori_rx_pkts, ori_tx_pkts = self.strip_portstats(port)
pkt.send_pkt(self.tester, tx_port=intf, count=4)
- time.sleep(1)
+ time.sleep(3)
rx_pkts, tx_pkts = self.strip_portstats(port)
self.verify((rx_pkts == (ori_rx_pkts + 4)), "Failed to record Rx/Tx packets")
@@ -402,7 +402,7 @@ class TestUserspaceEthtool(TestCase):
intf = netdev.get_interface_name()
ethtool_eeprom = "ethtool_eeprom_%d.bin" % index
# dump eeprom by linux ethtool
- self.dut.send_expect("ethtool --eeprom-dump %s raw on > %s" % (intf, ethtool_eeprom), "# ")
+ self.dut.send_expect("ethtool --eeprom-dump %s raw on > %s" % (intf, ethtool_eeprom), "# ", 180)
# wait for file ready
time.sleep(2)
# dpdk userspcae tools dump eeprom file size different with kernel ethtool dump
@@ -429,6 +429,7 @@ class TestUserspaceEthtool(TestCase):
ori_rx_pkts, ori_tx_pkts = self.strip_portstats(port)
_, rx_max, _, tx_max = self.strip_ringparam(index)
self.dut.send_expect("ringparam %d %d %d" % (index, tx_max, rx_max), "EthApp>")
+ time.sleep(3)
rx_ring, _, tx_ring, _ = self.strip_ringparam(index)
self.verify(rx_ring == rx_max, "Userspace tool failed to set Rx ring parameter")
self.verify(tx_ring == tx_max, "Userspace tool failed to set Tx ring parameter")
@@ -438,68 +439,13 @@ class TestUserspaceEthtool(TestCase):
'Fail to Open port{}'.format(index))
intf = self.tester.get_interface(tester_port)
+ time.sleep(3)
pkt.send_pkt(self.tester, tx_port=intf, count=4)
+ time.sleep(3)
rx_pkts, tx_pkts = self.strip_portstats(index)
self.verify(rx_pkts == ori_rx_pkts + 4, "Failed to forward after ring parameter changed")
self.dut.send_expect("quit", "# ")
- def test_ethtool_vlan(self):
- """
- Test ethtool app vlan add and delete
- """
- main_file = "examples/ethtool/ethtool-app/main.c"
- # enable vlan filter
- self.dut.send_expect("sed -i -e '/cfg_port.txmode.mq_mode = ETH_MQ_TX_NONE;$/a\\cfg_port.rxmode.offloads|=DEV_RX_OFFLOAD_VLAN_FILTER;' %s" % main_file, "# ")
-
- # build sample app
- self.build_ethtool()
-
- self.dut.send_expect(self.cmd, "EthApp>", 60)
- for index in range(len(self.ports)):
- port = self.ports[index]
- dst_mac = self.dut.get_mac_address(port)
- # generate random vlan
- vlan = random.randrange(0, 4095)
- # add vlan on port, record original statistic
- self.dut.send_expect("vlan %d add %d" % (index, vlan), "EthApp>")
- ori_rx_pkts, ori_tx_pkts = self.strip_portstats(port)
-
- # send correct vlan packet to port
- pkt = Packet(pkt_type='VLAN_UDP')
- pkt.config_layer('ether', {'dst': dst_mac})
- pkt.config_layer('vlan', {'vlan': vlan})
- tester_port = self.tester.get_local_port(port)
- intf = self.tester.get_interface(tester_port)
- self.verify(self.ethapp_check_link_status(index, 'Up') == True,
- 'Fail to Open port{}'.format(index))
-
- pkt.send_pkt(self.tester, tx_port=intf, count=4)
- rx_pkts, tx_pkts = self.strip_portstats(port)
- self.verify(rx_pkts == ori_rx_pkts + 4, "Failed to Rx vlan packet")
- self.verify(tx_pkts == ori_tx_pkts + 4, "Failed to Tx vlan packet")
-
- # send incorrect vlan packet to port
- wrong_vlan = (vlan + 1) % 4096
- pkt.config_layer('vlan', {'vlan': wrong_vlan})
- pkt.send_pkt(self.tester, tx_port=intf, count=4)
- time.sleep(2)
- rx_pkts_wrong, tx_pkts_wrong = self.strip_portstats(port)
- self.verify(tx_pkts_wrong == rx_pkts, "Failed to filter Rx vlan packet")
-
- # remove vlan
- self.dut.send_expect("vlan %d del %d" % (index, vlan), "EthApp>")
- # send same packet and make sure not received
- pkt.config_layer('vlan', {'vlan': vlan})
- pkt.send_pkt(self.tester, tx_port=intf, count=4)
- time.sleep(2)
- rx_pkts_del, tx_pkts_del = self.strip_portstats(port)
- self.verify(tx_pkts_del == rx_pkts, "Failed to remove Rx vlan filter")
-
- self.dut.send_expect("quit", "# ")
- self.dut.send_expect("sed -i -e '/cfg_port.rxmode.offloads|=DEV_RX_OFFLOAD_VLAN_FILTER;$/d' %s" % main_file, "# ")
- # build sample app
- self.build_ethtool()
-
def test_mac_address(self):
"""
Test ethtool app mac function
@@ -561,7 +507,9 @@ class TestUserspaceEthtool(TestCase):
pkt = Packet(pkt_type='UDP')
tester_port = self.tester.get_local_port(port)
intf = self.tester.get_interface(tester_port)
+ time.sleep(3)
pkt.send_pkt(self.tester, tx_port=intf, count=4)
+ time.sleep(3)
rx_pkts, tx_pkts = self.strip_portstats(index)
self.verify(rx_pkts == ori_rx_pkts, "Failed to stop port")
# restart port and check packet can normally forwarded
@@ -570,7 +518,9 @@ class TestUserspaceEthtool(TestCase):
'Fail to Open port{}'.format(index))
# wait few time for port ready
rx_pkts, tx_pkts = self.strip_portstats(index)
+ time.sleep(3)
pkt.send_pkt(self.tester, tx_port=intf, count=4)
+ time.sleep(3)
rx_pkts_open, tx_pkts_open = self.strip_portstats(index)
self.verify(rx_pkts_open == rx_pkts + 4, "Failed to reopen port rx")
self.verify(tx_pkts_open == tx_pkts + 4, "Failed to reopen port tx")
--
2.27.0
next reply other threads:[~2022-02-11 2:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-11 2:28 Weiyuan Li [this message]
2022-02-11 2:28 ` [dts][PATCH V1 2/2] test_plans/userspace_ethtool: " Weiyuan Li
2022-02-11 5:50 ` [dts][PATCH V1 1/2] tests/userspace_ethtool: " Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220211022813.2144206-1-weiyuanx.li@intel.com \
--to=weiyuanx.li@intel.com \
--cc=dts@dpdk.org \
--cc=lijuan.tu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).