[dts][PATCH V1 0/2] optimize script: wait for interface up

[dts][PATCH V1 0/2] optimize script: wait for interface up

[Yu Jiang]

optimize script: wait for interface up

Yu Jiang (2):
  tests/flow_classify*: wait for interface up
  tests/interrupt_pmd: wait for interface up

 tests/TestSuite_flow_classify.py         | 1 +
 tests/TestSuite_flow_classify_softnic.py | 9 ++++++---
 tests/TestSuite_interrupt_pmd.py         | 7 ++++---
 3 files changed, 11 insertions(+), 6 deletions(-)

-- 
2.25.1

[dts][PATCH V1 1/2] tests/flow_classify*: wait for interface up

[Yu Jiang]

optimize script: flow_classify/flow_classify_softnic,
1, use new method: is_interface_up to to ensure iface's link status before send_packets
2, wait_link_status_up for all ports after start testpmd

Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
 tests/TestSuite_flow_classify.py         | 1 +
 tests/TestSuite_flow_classify_softnic.py | 9 ++++++---
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/tests/TestSuite_flow_classify.py b/tests/TestSuite_flow_classify.py
index 200d39e0..5b28b884 100644
--- a/tests/TestSuite_flow_classify.py
+++ b/tests/TestSuite_flow_classify.py
@@ -253,6 +253,7 @@ class TestFlowClassify(TestCase):
         tx_iface = config.get('tx_intf')
         cmd = "ifconfig {0} up".format(tx_iface)
         self.tester.send_expect(cmd, '# ', 30)
+        self.verify(self.tester.is_interface_up(intf=tx_iface), "Wrong link status, should be up")
         pkts = config.get('stream')
         # stream config
         stream_configs = config.get('stream configs')
diff --git a/tests/TestSuite_flow_classify_softnic.py b/tests/TestSuite_flow_classify_softnic.py
index 7b6642d0..c5004f16 100644
--- a/tests/TestSuite_flow_classify_softnic.py
+++ b/tests/TestSuite_flow_classify_softnic.py
@@ -179,12 +179,15 @@ class TestFlowClassifySoftnic(TestCase):
         Sent pkts that read from the pcap_file.
         Return the sniff pkts.
         """
-        self.pmdout.wait_link_status_up(self.dut_ports[0])
+        self.pmdout.wait_link_status_up('all')
         tx_port = self.tester.get_local_port(self.dut_ports[from_port%self.port_num])
         rx_port = self.tester.get_local_port(self.dut_ports[to_port%self.port_num])
 
         tx_interface = self.tester.get_interface(tx_port)
         rx_interface = self.tester.get_interface(rx_port)
+        # check tester's link status before send packet
+        for iface in [tx_interface, rx_interface]:
+            self.verify(self.tester.is_interface_up(intf=iface), "Wrong link status, should be up")
 
         self.tcpdump_start_sniff(rx_interface, filters)
 
@@ -284,9 +287,9 @@ class TestFlowClassifySoftnic(TestCase):
         """
         Sends continuous packets.
         """
-        self.pmdout.wait_link_status_up(self.dut_ports[0])
+        self.pmdout.wait_link_status_up('all')
+        self.verify(self.tester.is_interface_up(intf=itf), "Wrong link status, should be up")
         self.tester.scapy_foreground()
-        time.sleep(2)
         if src_dst == "src":
             if ptype == "ipv4":
                 var = src_addr.split(".")
-- 
2.25.1

[dts][PATCH V1 2/2] tests/interrupt_pmd: wait for interface up

[Yu Jiang]

optimize script: interrupt_pmd,
use new method: is_interface_up to to ensure iface's link status before send_packets

Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
 tests/TestSuite_interrupt_pmd.py | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/tests/TestSuite_interrupt_pmd.py b/tests/TestSuite_interrupt_pmd.py
index db8efe44..dd413aca 100644
--- a/tests/TestSuite_interrupt_pmd.py
+++ b/tests/TestSuite_interrupt_pmd.py
@@ -129,10 +129,11 @@ class TestInterruptPmd(TestCase):
         Send a packet to port
         """
         for i in range(len(self.dut_ports[:portnum])):
+            txport = self.tester.get_local_port(self.dut_ports[i])
+            mac = self.dut.get_mac_address(self.dut_ports[i])
+            txItf = self.tester.get_interface(txport)
+            self.verify(self.tester.is_interface_up(intf=txItf), "Tester's %s should be up".format(txItf))
             for j in range(num):
-                txport = self.tester.get_local_port(self.dut_ports[i])
-                mac = self.dut.get_mac_address(self.dut_ports[i])
-                txItf = self.tester.get_interface(txport)
                 self.tester.scapy_append(
                     'sendp([Ether()/IP(dst="198.0.0.%d")/UDP()/Raw(\'X\'*18)], iface="%s")' % (j, txItf))
         self.tester.scapy_execute()
-- 
2.25.1

RE: [dts][PATCH V1 2/2] tests/interrupt_pmd: wait for interface up

[Tu, Lijuan]

> -----Original Message-----
> From: Jiang, YuX <yux.jiang@intel.com>
> Sent: 2022年2月24日 23:29
> To: Tu, Lijuan <lijuan.tu@intel.com>; dts@dpdk.org
> Cc: Jiang, YuX <yux.jiang@intel.com>
> Subject: [dts][PATCH V1 2/2] tests/interrupt_pmd: wait for interface up
> 
> optimize script: interrupt_pmd,
> use new method: is_interface_up to to ensure iface's link status before
> send_packets
> 
> Signed-off-by: Yu Jiang <yux.jiang@intel.com>

Series applied