* [dts][PATCH V1 1/5] test_plans/vm2vm_virtio_user_test_plan: delete case 12-23
@ 2022-04-01 10:10 Wei Ling
0 siblings, 0 replies; only message in thread
From: Wei Ling @ 2022-04-01 10:10 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
As commit 53d3f4778c(vhost: integrate dmadev in asynchronous data-path),
delete cbdma related case 12-23 form tests/vm2vm_virtio_user_test_plan.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
test_plans/vm2vm_virtio_user_test_plan.rst | 803 +--------------------
1 file changed, 1 insertion(+), 802 deletions(-)
diff --git a/test_plans/vm2vm_virtio_user_test_plan.rst b/test_plans/vm2vm_virtio_user_test_plan.rst
index c3aa328e..ece1864d 100644
--- a/test_plans/vm2vm_virtio_user_test_plan.rst
+++ b/test_plans/vm2vm_virtio_user_test_plan.rst
@@ -793,808 +793,7 @@ Test Case 11: packed virtqueue vm2vm vectorized path test with ring size is not
9. Quit pdump,vhost received packets in pdump-vhost-rx.pcap,check headers and payload of all packets in pdump-virtio-rx.pcap and pdump-vhost-rx.pcap and ensure the content are same.
-Test Case 12: split virtqueue vm2vm non-mergeable path multi-queues payload check with cbdma enabled
-====================================================================================================
-
-1. bind 4 cbdma port to vfio-pci and launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:80:04.2;txq1@0000:80:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=0,queue_size=4096 \
- -- -i --enable-hw-vlan-strip --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=0,queue_size=4096 \
- -- -i --enable-hw-vlan-strip --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set burst 1
- testpmd>set txpkts 64,128,256,512
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set txpkts 64
- testpmd>start tx_first 1
- testpmd>stop
-
-5. Start vhost testpmd, check virtio-user1 RX-packets is 566 and RX-bytes is 486016, 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:80:04.2;txq1@0000:80:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 1
- testpmd>set txpkts 64,128,256,512
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set txpkts 64
- testpmd>start tx_first 1
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 13: split virtqueue vm2vm mergeable path multi-queues payload check with cbdma enabled
-================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
-
-5. Start vhost testpmd, check 502 packets and 279232 bytes received by virtio-user1 and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 14: split virtqueue vm2vm inorder non-mergeable path multi-queues payload check with cbdma enabled
-============================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
-
-5. Start vhost testpmd, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 15: split virtqueue vm2vm vectorized path multi-queues payload check with cbdma enabled
-==================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=0,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-5. Start vhost testpmd, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 16: Split virtqueue vm2vm inorder mergeable path test non-indirect descriptor with cbdma enable
-=========================================================================================================
-
-1. Launch testpmd by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1,queue_size=256 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets(include 251 small packets and 32 8K packets)::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1,queue_size=256 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
- testpmd>set burst 1
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set txpkts 2000,2000,2000,2000
- testpmd>start tx_first 1
- testpmd>stop
-
-5. Start vhost, then quit pdump and three testpmd, about split virtqueue inorder mergeable path, it use the non-indirect descriptors, the 8k length pkt will occupies 5 ring:2000,2000,2000,2000 will need 4 consequent ring,
-still need one ring put header. So check 504 packets and 48128 bytes received by virtio-user1 and 502 packets with 64 length and 2 packets with 8K length in pdump-virtio-rx.pcap.
-
-6. Relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx
- testpmd>vhost enable tx all
-
-7. Rerun step 2-5.
-
-Test Case 17: Split virtqueue vm2vm mergeable path test indirect descriptor with cbdma enable
-=============================================================================================
-
-1. Launch testpmd by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=256 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets(include 251 small packets and 32 8K packets)::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=256 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
- testpmd>set burst 1
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set txpkts 2000,2000,2000,2000
- testpmd>start tx_first 1
- testpmd>stop
-
-5. Start vhost, then quit pdump and three testpmd, about split virtqueue mergeable path, it use the indirect descriptors, the 8k length pkt will just occupies one ring.
-So check 512 packets and 112128 bytes received by virtio-user1 and 502 packets with 64 length and 10 packets with 8K length in pdump-virtio-rx.pcap.
-
-6. Relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx
- testpmd>vhost enable tx all
-
-7. Rerun step 2-5.
-
-Test Case 18: packed virtqueue vm2vm non-mergeable path multi-queues payload check with cbdma enabled
-=====================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:80:04.2;txq1@0000:80:04.3]' \
- --iova=va -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-5. Start vhost testpmd, check virtio-user1 RX-packets is 448 and RX-bytes is 28672, 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:80:04.2;txq1@0000:80:04.3]' \
- --iova=pa -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 19: packed virtqueue vm2vm mergeable path multi-queues payload check with cbdma enabled
-=================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
-
-5. Start vhost testpmd, then quit pdump, check 502 packets and 279232 bytes received by virtio-user1 and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 20: packed virtqueue vm2vm inorder mergeable path multi-queues payload check with cbdma enabled
-=========================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
-
-5. Start vhost testpmd, then quit pdump, check 502 packets and 279232 bytes received by virtio-user1 and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 21: packed virtqueue vm2vm inorder non-mergeable path multi-queues payload check with cbdma enabled
-=============================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \
- --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send 8k length packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \
- --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
-
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-5. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 22: packed virtqueue vm2vm vectorized path multi-queues payload check with cbdma enabled
-===================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send 8k length packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4096 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-5. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 23: packed virtqueue vm2vm vectorized path multi-queues payload check with ring size is not power of 2 and cbdma enabled
-==================================================================================================================================
-
-1. Launch vhost by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-2. Launch virtio-user1 by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio1 \
- --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4097 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4097 --rxd=4097
- testpmd>set fwd rxonly
- testpmd>start
-
-3. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-4. Launch virtio-user0 and send 8k length packets::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4097 \
- -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4097 --rxd=4097
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-5. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap.
-
-6. Clear virtio-user1 port stats::
-
- testpmd>stop
- testpmd>clear port stats all
- testpmd>start
-
-7. Quit and relaunch vhost with iova=pa by below command::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1]' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.3]' \
- --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx
- testpmd>vhost enable tx all
-
-8. Attach pdump secondary process to primary process by same file-prefix::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000'
-
-9. Virtio-user0 send packets::
-
- testpmd>set burst 32
- testpmd>set txpkts 64
- testpmd>start tx_first 7
- testpmd>stop
- testpmd>set burst 1
- testpmd>set txpkts 64,256,2000,64,256,2000
- testpmd>start tx_first 27
- testpmd>stop
-
-10. Rerun step 5.
-
-Test Case 24: packed virtqueue vm2vm vectorized-tx path multi-queues test indirect descriptor
+Test Case 12: packed virtqueue vm2vm vectorized-tx path multi-queues test indirect descriptor
=============================================================================================
1. Launch vhost by below command::
--
2.25.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-04-01 10:10 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-01 10:10 [dts][PATCH V1 1/5] test_plans/vm2vm_virtio_user_test_plan: delete case 12-23 Wei Ling
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).