1)Fix testcase2 app name error issue 2)Change testcase1 `set fwd txonly` to `set fwd mac` and change `start` to `start tx_first` to send packets. Signed-off-by: Wei Ling <weix.ling@intel.com> --- test_plans/vdev_primary_secondary_test_plan.rst | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/test_plans/vdev_primary_secondary_test_plan.rst b/test_plans/vdev_primary_secondary_test_plan.rst index b98d2d04..cdb71e61 100644 --- a/test_plans/vdev_primary_secondary_test_plan.rst +++ b/test_plans/vdev_primary_secondary_test_plan.rst @@ -129,8 +129,6 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test 1. Bind one port to vfio-pci, launch testpmd by below command:: ./<build_target>/app/dpdk-testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024 - testpmd>set fwd txonly - testpmd>start 2. Launch VM with two virtio ports, must set queues=2 as app receive packets from special queue which index same with proc-id:: @@ -156,7 +154,12 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test ./<build_target>/examples/dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 ./<build_target>/examples/dpdk-symmetric_mp -l 2 -n 4 --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 -5. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: +5. Send packets from vhost testpmd:: + + testpmd> set fwd mac + testpmd> start tx_first + +6. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: Port 0: RX - 27511680, TX - 256, Drop - 27499168 Port 1: RX - 27499424, TX - 256, Drop - 27511424 @@ -191,7 +194,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 4. Start sample code as primary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 example> list list all etherdev 0 0000:00:05.0 @@ -199,7 +202,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 5. Start sample code as secondary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 example> list list all etherdev 0 0000:00:05.0 -- 2.25.1
test_plans/vdev_primary_secondary_test_plan: 1)Fix testcase2 app name error issue. 2)Change testcase1 testpmd fwd mode for better case coverage. Signed-off-by: Wei Ling <weix.ling@intel.com> --- test_plans/vdev_primary_secondary_test_plan.rst | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/test_plans/vdev_primary_secondary_test_plan.rst b/test_plans/vdev_primary_secondary_test_plan.rst index b98d2d04..cdb71e61 100644 --- a/test_plans/vdev_primary_secondary_test_plan.rst +++ b/test_plans/vdev_primary_secondary_test_plan.rst @@ -129,8 +129,6 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test 1. Bind one port to vfio-pci, launch testpmd by below command:: ./<build_target>/app/dpdk-testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024 - testpmd>set fwd txonly - testpmd>start 2. Launch VM with two virtio ports, must set queues=2 as app receive packets from special queue which index same with proc-id:: @@ -156,7 +154,12 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test ./<build_target>/examples/dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 ./<build_target>/examples/dpdk-symmetric_mp -l 2 -n 4 --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 -5. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: +5. Send packets from vhost testpmd:: + + testpmd> set fwd mac + testpmd> start tx_first + +6. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: Port 0: RX - 27511680, TX - 256, Drop - 27499168 Port 1: RX - 27499424, TX - 256, Drop - 27511424 @@ -191,7 +194,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 4. Start sample code as primary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 example> list list all etherdev 0 0000:00:05.0 @@ -199,7 +202,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 5. Start sample code as secondary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 example> list list all etherdev 0 0000:00:05.0 -- 2.25.1
test_plans/vdev_primary_secondary_test_plan: 1)Fix testcase2 app name error issue. 2)Change testcase1 testpmd fwd mode take VM and testpmd can loop the traffic. Signed-off-by: Wei Ling <weix.ling@intel.com> --- test_plans/vdev_primary_secondary_test_plan.rst | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/test_plans/vdev_primary_secondary_test_plan.rst b/test_plans/vdev_primary_secondary_test_plan.rst index b98d2d04..cdb71e61 100644 --- a/test_plans/vdev_primary_secondary_test_plan.rst +++ b/test_plans/vdev_primary_secondary_test_plan.rst @@ -129,8 +129,6 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test 1. Bind one port to vfio-pci, launch testpmd by below command:: ./<build_target>/app/dpdk-testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024 - testpmd>set fwd txonly - testpmd>start 2. Launch VM with two virtio ports, must set queues=2 as app receive packets from special queue which index same with proc-id:: @@ -156,7 +154,12 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test ./<build_target>/examples/dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 ./<build_target>/examples/dpdk-symmetric_mp -l 2 -n 4 --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 -5. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: +5. Send packets from vhost testpmd:: + + testpmd> set fwd mac + testpmd> start tx_first + +6. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: Port 0: RX - 27511680, TX - 256, Drop - 27499168 Port 1: RX - 27499424, TX - 256, Drop - 27511424 @@ -191,7 +194,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 4. Start sample code as primary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 example> list list all etherdev 0 0000:00:05.0 @@ -199,7 +202,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 5. Start sample code as secondary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 example> list list all etherdev 0 0000:00:05.0 -- 2.25.1
test_plans/vdev_primary_secondary_test_plan: 1)Fix testcase2 app name error issue. 2)Change testcase1 testpmd fwd mode from `set fwd txonly` and `start` to `set fwd mac` and `start tx_first` take VM and testpmd can loop the traffic. Signed-off-by: Wei Ling <weix.ling@intel.com> --- test_plans/vdev_primary_secondary_test_plan.rst | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/test_plans/vdev_primary_secondary_test_plan.rst b/test_plans/vdev_primary_secondary_test_plan.rst index b98d2d04..cdb71e61 100644 --- a/test_plans/vdev_primary_secondary_test_plan.rst +++ b/test_plans/vdev_primary_secondary_test_plan.rst @@ -129,8 +129,6 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test 1. Bind one port to vfio-pci, launch testpmd by below command:: ./<build_target>/app/dpdk-testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024 - testpmd>set fwd txonly - testpmd>start 2. Launch VM with two virtio ports, must set queues=2 as app receive packets from special queue which index same with proc-id:: @@ -156,7 +154,12 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test ./<build_target>/examples/dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 ./<build_target>/examples/dpdk-symmetric_mp -l 2 -n 4 --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 -5. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: +5. Send packets from vhost testpmd:: + + testpmd> set fwd mac + testpmd> start tx_first + +6. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: Port 0: RX - 27511680, TX - 256, Drop - 27499168 Port 1: RX - 27499424, TX - 256, Drop - 27511424 @@ -191,7 +194,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 4. Start sample code as primary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 example> list list all etherdev 0 0000:00:05.0 @@ -199,7 +202,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 5. Start sample code as secondary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 example> list list all etherdev 0 0000:00:05.0 -- 2.25.1
test_plans/vdev_primary_secondary_test_plan: 1)Fix testcase2 app name error issue. 2)Change testcase1 testpmd fwd mode from `set fwd txonly` and `start` to `set fwd mac` and `start tx_first` take VM and testpmd can loop the traffic. Signed-off-by: Wei Ling <weix.ling@intel.com> --- test_plans/vdev_primary_secondary_test_plan.rst | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/test_plans/vdev_primary_secondary_test_plan.rst b/test_plans/vdev_primary_secondary_test_plan.rst index b98d2d04..9d11950f 100644 --- a/test_plans/vdev_primary_secondary_test_plan.rst +++ b/test_plans/vdev_primary_secondary_test_plan.rst @@ -129,8 +129,6 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test 1. Bind one port to vfio-pci, launch testpmd by below command:: ./<build_target>/app/dpdk-testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024 - testpmd>set fwd txonly - testpmd>start 2. Launch VM with two virtio ports, must set queues=2 as app receive packets from special queue which index same with proc-id:: @@ -156,7 +154,12 @@ Test Case 1: Virtio-pmd primary and secondary process symmetric test ./<build_target>/examples/dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 ./<build_target>/examples/dpdk-symmetric_mp -l 2 -n 4 --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 -5. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: +5. Send packets from vhost testpmd:: + + testpmd> set fwd mac + testpmd> start tx_first + +6. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process:: Port 0: RX - 27511680, TX - 256, Drop - 27499168 Port 1: RX - 27499424, TX - 256, Drop - 27511424 @@ -191,7 +194,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 4. Start sample code as primary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0 example> list list all etherdev 0 0000:00:05.0 @@ -199,7 +202,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test 5. Start sample code as secondary process:: - ./<build_target>/examples/dpdk-symmetric_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 + ./<build_target>/examples/dpdk-hotplug_mp --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1 example> list list all etherdev 0 0000:00:05.0 -- 2.25.1