From: Wei Ling <weix.ling@intel.com> To: dts@dpdk.org Cc: Wei Ling <weix.ling@intel.com> Subject: [dts][PATCH V2 2/3] test_plans/vhost_virtio_user_interrupt_cbdma_test_plan: add vhost_virtio_user_interrupt_cbdma testplan Date: Sat, 7 May 2022 05:33:24 -0400 Message-ID: <20220507093324.310285-1-weix.ling@intel.com> (raw) Add new testplan test_plans/vhost_virtio_user_interrupt_cbdma_test_plan into test_plans. Signed-off-by: Wei Ling <weix.ling@intel.com> --- ..._virtio_user_interrupt_cbdma_test_plan.rst | 137 ++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.rst diff --git a/test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.rst b/test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.rst new file mode 100644 index 00000000..090c4503 --- /dev/null +++ b/test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.rst @@ -0,0 +1,137 @@ +.. Copyright (c) <2022>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + +===================================================== +vhost/virtio-user interrupt mode with cbdma test plan +===================================================== + +Virtio-user interrupt need test with l3fwd-power sample, small packets send from traffic generator +to virtio side, check virtio-user cores can be wakeup status, and virtio-user cores should be sleep +status after stop sending packets from traffic generator when CBDMA enabled.This test plan cover both +vhost-net and vhost-user as the backend. + +Test Case1: LSC event between vhost-user and virtio-user with split ring and cbdma enabled +========================================================================================== + +flow: Vhost <--> Virtio + +1. Bind 1 CBDMA channel to vfio-pci driver, then start vhost-user side:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3000 -n 4 -a 00:04.0 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0,dmas=[txq0@00:04.0]' -- -i + testpmd> set fwd mac + testpmd> start + +2. Start virtio-user side:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc000 -n 4 --no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net -- -i --tx-offloads=0x00 + testpmd> set fwd mac + testpmd> start + +3. Check the virtio-user side link status:: + + testpmd> show port info 0 + #it should show "up" + +4. Quit the vhost-user side with testpmd, then check the virtio-user side link status:: + + testpmd> show port info 0 + #it should show "down" + +Test Case2: Split ring virtio-user interrupt test with vhost-user as backend and cbdma enabled +============================================================================================== + +flow: TG --> NIC --> Vhost --> Virtio + +1. Bind 1 CBDMA channel and 1 NIC port to vfio-pci, launch testpmd with a virtual vhost device as backend:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@00:04.0]' -- -i --rxq=1 --txq=1 + testpmd> start + +2. Start l3fwd-power with a virtio-user device:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0xc000 -n 4 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \ + --vdev=virtio_user0,path=./vhost-net -- -p 1 -P --config="(0,0,14)" --parse-ptype + +3. Send packets with packet generator, check the virtio-user related core can be wakeup status. + +4. Stop sending packets with packet generator, check virtio-user related core change to sleep status. + +5. Restart sending packets with packet generator, check virtio-user related core change to wakeup status again. + +Test Case3: LSC event between vhost-user and virtio-user with packed ring and cbdma enabled +=========================================================================================== + +flow: Vhost <--> Virtio + +1. Bind one cbdma port to vfio-pci driver, then start vhost-user side:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3000 -n 4 -a 00:04.0 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0,dmas=[txq0@00:04.0]' -- -i + testpmd> set fwd mac + testpmd> start + +2. Start virtio-user side:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc000 -n 4 --no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1 -- -i --tx-offloads=0x00 + testpmd> set fwd mac + testpmd> start + +3. Check the virtio-user side link status:: + + testpmd> show port info 0 + #it should show "up" + +4. Quit the vhost-user side with testpmd, then check the virtio-user side link status:: + + testpmd> show port info 0 + #it should show "down" + +Test Case4: Packed ring virtio-user interrupt test with vhost-user as backend and cbdma enabled +================================================================================================ + +flow: TG --> NIC --> Vhost --> Virtio + +1. Bind one cbdma port and one NIC port to vfio-pci, launch testpmd with a virtual vhost device as backend:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@00:04.0]' -- -i --rxq=1 --txq=1 + testpmd> start + +2. Start l3fwd-power with a virtio-user device:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0xc000 -n 4 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \ + --vdev=virtio_user0,path=./vhost-net,packed_vq=1 -- -p 1 -P --config="(0,0,14)" --parse-ptype + +3. Send packets with packet generator, check the virtio-user related core can be wakeup status. + +4. Stop sending packets with packet generator, check virtio-user related core change to sleep status. + +5. Restart sending packets with packet generator, check virtio-user related core change to wakeup status again. + -- 2.25.1
reply other threads:[~2022-05-07 9:33 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220507093324.310285-1-weix.ling@intel.com \ --to=weix.ling@intel.com \ --cc=dts@dpdk.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
test suite reviews and discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://inbox.dpdk.org/dts/0 dts/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 dts dts/ http://inbox.dpdk.org/dts \ dts@dpdk.org public-inbox-index dts Example config snippet for mirrors. Newsgroup available over NNTP: nntp://inbox.dpdk.org/inbox.dpdk.dts AGPL code for this site: git clone https://public-inbox.org/public-inbox.git