From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts][PATCH V1 4/7] test_plans/pvp_vhost_dsa_test_plan: add pvp_vhost_dsa testplan
Date: Sat, 7 May 2022 05:59:19 -0400 [thread overview]
Message-ID: <20220507095919.311060-1-weix.ling@intel.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 141611 bytes --]
Add pvp_vhost_dsa_test_plan.rst test_plans.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
test_plans/pvp_vhost_dsa_test_plan.rst | 2600 ++++++++++++++++++++++++
1 file changed, 2600 insertions(+)
create mode 100644 test_plans/pvp_vhost_dsa_test_plan.rst
diff --git a/test_plans/pvp_vhost_dsa_test_plan.rst b/test_plans/pvp_vhost_dsa_test_plan.rst
new file mode 100644
index 00000000..4d8625bc
--- /dev/null
+++ b/test_plans/pvp_vhost_dsa_test_plan.rst
@@ -0,0 +1,2600 @@
+.. Copyright (c) <2022>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+====================================================
+PVP vhost async operation with DSA driver test plan
+====================================================
+
+Description
+===========
+
+This document provides the test plan for testing Vhost asynchronous
+data path with DSA driver (kernel IDXD driver and DPDK vfio-pci driver)
+in the PVP topology environment with testpmd.
+
+DSA is a kind of DMA engine, Vhost asynchronous data path leverages DMA devices
+to offload memory copies from the CPU and it is implemented in an asynchronous way.
+Linux kernel and DPDK provide DSA driver (kernel IDXD driver and DPDK vfio-pci driver),
+no matter which driver is used, DPDK DMA library is used in data-path to offload copies
+to DSA, and the only difference is which driver configures DSA. It enables applications,
+like OVS, to save CPU cycles and hide memory copy overhead, thus achieving higher throughput.
+Vhost doesn't manage DMA devices and applications, like OVS, need to manage and configure DSA
+devices. Applications need to tell vhost what DSA devices to use in every data path function call.
+This design enables the flexibility for applications to dynamically use DMA channels in different
+function modules, not limited in vhost. In addition, vhost supports M:N mapping between vrings
+and DMA virtual channels. Specifically, one vring can use multiple different DMA channels
+and one DMA channel can be shared by multiple vrings at the same time.
+
+IOMMU impact:
+If iommu off, idxd can work with iova=pa
+If iommu on, kernel dsa driver only can work with iova=va by program IOMMU, can't use iova=pa(fwd not work due to pkts payload wrong).
+
+Note: DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd, and the suite has not yet been automated.
+
+Prerequisites
+=============
+
+Topology
+--------
+ Test flow: TG-->NIC-->Vhost-user-->Virtio-user-->Vhost-user-->NIC-->TG
+
+Hardware
+--------
+ Supportted NICs: ALL
+
+Software
+--------
+ Trex:http://trex-tgn.cisco.com/trex/release/v2.26.tar.gz
+
+General set up
+--------------
+1. Compile DPDK::
+
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=<dpdk build dir>
+ # ninja -C <dpdk build dir> -j 110
+ For example,
+ CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc
+ ninja -C x86_64-native-linuxapp-gcc -j 110
+
+2. Get the PCI device ID and DSA device ID of DUT, for example, 0000:4f:00.1 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -s
+
+ Network devices using kernel driver
+ ===================================
+ 0000:4f:00.1 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci
+
+ DMA devices using kernel driver
+ ===============================
+ 0000:6a:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:6f:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:74:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:79:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:e7:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:ec:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:f1:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:f6:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+
+Test case
+=========
+
+Common steps
+------------
+1. Bind 1 NIC port to vfio-pci::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port pci device id>
+
+ For example:
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:00:4f.1
+
+2. Bind DSA devices to DPDK vfio-pci driver::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port DSA device id>
+
+ For example, bind 2 DMA devices to vfio-pci driver:
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0
+
+.. note::
+
+ One DPDK DSA device can create 8 WQ at most. Below is an example, where DPDK DSA device will create one and
+ eight WQ for DSA deivce 0000:e7:01.0 and 0000:ec:01.0. The value of “max_queues” is 1~8:
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:e7:01.0,max_queues=1 -- -i
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:ec:01.0,max_queues=8 -- -i
+
+3. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ)::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd <numDevices * 2>
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q <numWq>
+
+.. note::
+
+ Better to reset WQ when need operate DSA devices that bound to idxd drvier:
+ <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <numDevices * 2>
+ You can check it by 'ls /dev/dsa'
+ numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0
+ numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8
+
+ For example, bind 2 DMA devices to idxd driver and configure WQ:
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
+ Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq2.0 wq2.1 wq2.2 wq2.3"
+
+4. Send imix packets [64,1518] to NIC by traffic generator::
+
+ The imix packets include packet size [64, 128, 256, 512, 1024, 1518], and the format of packet is as follows.
+ +-------------+-------------+-------------+-------------+
+ | MAC | MAC | IPV4 | IPV4 |
+ | Src address | Dst address | Src address | Dst address |
+ |-------------|-------------|-------------|-------------|
+ | Random MAC | Virtio mac | Random IP | Random IP |
+ +-------------+-------------+-------------+-------------+
+ All the packets in this test plan use the Virtio mac: 00:11:22:33:44:10.
+
+Test Case 1: PVP split ring all path vhost enqueue operations with 1:1 mapping between vrings and dsa dpdk driver channels
+---------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with 1 core and 1 queue
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind one dsa device(f6:01.0) and one nic port(4f:00.1) to vfio-pci like common step 1-2.
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3@0000:f6:01.0-q0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1,vectorized=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/vhost-net0,queues=1,dmas=[txq0]' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q1]
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Rerun step 3-6.
+
+13. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3@0000:f6:01.0-q3]
+ testpmd>set fwd csum
+ testpmd>start
+
+14. Rerun step 3-10 with csum fwd.
+
+Test Case 2: PVP split ring all path multi-queues vhost async enqueue with 1:1 mapping between vrings and dsa dpdk driver channels
+-----------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 8 dsa device(6a:01.0-f6:01.0) and one nic port(4f:00.1) to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:4f:00.1
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore12@0000:f6:01.0-q1,lcore13@0000:f6:01.0-q2,lcore14@0000:f6:01.0-q3,lcore15@0000:f6:01.0-q4,lcore16@0000:f6:01.0-q5,lcore17@0000:f6:01.0-q6,lcore18@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=1 -a 0000:6f:01.0,max_queues=1 \
+ -a 0000:74:01.0,max_queues=1 -a 0000:79:01.0,max_queues=1 -a 0000:e7:01.0,max_queues=1 -a 0000:ec:01.0,max_queues=1 -a 0000:f1:01.0,max_queues=1 -a 0000:f6:01.0,max_queues=1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6f:01.0-q0,lcore13@0000:74:01.0-q0,lcore14@0000:79:01.0-q0,lcore15@0000:e7:01.0-q0,lcore16@0000:ec:01.0-q0,lcore17@0000:f1:01.0-q0,lcore18@0000:f6:01.0-q0]
+ testpmd>set fwd csum
+ testpmd>start
+
+12. Rerun step 3-6 with csum fwd.
+
+13. Quit all testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:79:01.0-q3,lcore15@0000:e7:01.0-q4,lcore16@0000:ec:01.0-q5,lcore17@0000:f1:01.0-q6,lcore18@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+14. Rerun step 3-6 with csum fwd.
+
+Test Case 3: PVP split ring all path multi-queues vhost enqueue operations with M to 1 mapping between vrings and CBDMA virtual channels
+-----------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:1.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 1 dsa device and one nic port to vfio-pci like comon step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f1:01.0-q0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f1:01.0-q3]
+ testpmd>set fwd csum
+ testpmd>start
+
+12. Rerun step 6 with csum fwd.
+
+Test Case 4: PVP split ring all path multi-queues vhost enqueue operations with 1 to N mapping between vrings and CBDMA virtual channels
+-----------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:N.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 8 dsa device and one nic port to vfio-pci like cmmon step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b 4f:00.1
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore11@0000:f6:01.0-q1,lcore11@0000:f6:01.0-q2,lcore11@0000:f6:01.0-q3,lcore11@0000:f6:01.0-q4,lcore11@0000:f6:01.0-q5,lcore11@0000:f6:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1,vectorized=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=1 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6f:01.0-q1,lcore11@0000:74:01.0-q2,lcore11@0000:79:01.0-q3,lcore11@0000:e7:01.0-q4,lcore11@0000:ec:01.0-q5,lcore11@0000:f1:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+12. Rerun step 3-10 with csum fwd.
+
+13. Quit all testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6f:01.0-q1,lcore11@0000:74:01.0-q2,lcore11@0000:79:01.0-q3,lcore11@0000:e7:01.0-q4,lcore11@0000:ec:01.0-q5,lcore11@0000:f1:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+14. Rerun step 8 with csum fwd.
+
+Test Case 5: PVP split ring all path multi-queues vhost enqueue operations with M to N mapping between vrings and CBDMA virtual channels
+-----------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:N.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 8 dsa device and one nic port to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore11@0000:f6:01.0-q1,lcore11@0000:f6:01.0-q2,lcore11@0000:f6:01.0-q3,lcore11@0000:f6:01.0-q4,lcore11@0000:f6:01.0-q5,lcore11@0000:f6:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore11@0000:f6:01.0-q1,lcore11@0000:f6:01.0-q2,lcore11@0000:f6:01.0-q3,lcore11@0000:f6:01.0-q4,lcore11@0000:f6:01.0-q5,lcore11@0000:f6:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Rerun step 3-6.
+
+13. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6f:01.0-q1,lcore11@0000:74:01.0-q2,lcore11@0000:79:01.0-q3,lcore11@0000:e7:01.0-q4,lcore11@0000:ec:01.0-q5,lcore11@0000:f1:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+14. Rerun step 7 with csum.
+
+15. Quit all testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore11@0000:f6:01.0-q1,lcore11@0000:f6:01.0-q2,lcore11@0000:f6:01.0-q3,lcore11@0000:f6:01.0-q4,lcore11@0000:f6:01.0-q5,lcore11@0000:f6:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+16. Rerun step 9 with csum fwd.
+
+Test Case 6: PVP split ring dynamic queues vhost async operation with dsa dpdk driver channels
+-------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring when vhost uses the asynchronous enqueue operations
+with dsa dpdk driver and if the vhost-user can work well when the queue number dynamic change. Both iova as VA and PA mode have beed tested.
+
+1. Bind 8 dsa devices and 1 NIC port to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:4f:00.1
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets[64,1518] from packet generator with random ip, check perforamnce can get target.
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 2 queues from vhost log.
+
+6. Quit and relaunch vhost with 1:1 mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=4 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3]' \
+ --iova=va -- -i --nb-cores=8 --txd=1024 --rxd=1024 --txq=4 --rxq=4 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q1,lcore13@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3]
+ testpmd>set fwd mac
+ testpmd>start
+
+7. Rerun step 4.
+
+8. Stop vhost port, check vhost RX and TX direction both exist packtes in 4 queues from vhost log.
+
+9. Quit and relaunch vhost with M:N(1:N;M<N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=8 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6a:01.0-q7,lcore12@0000:6a:01.0-q1,lcore12@0000:6a:01.0-q2,lcore12@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q2,lcore13@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3,lcore14@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q3,lcore15@0000:6a:01.0-q4,lcore15@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q6,lcore15@0000:6a:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Rerun step 4.
+
+11. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
+
+12. Quit and relaunch vhost with diff M:N(1:N;M<N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:f6:01.0-q7,lcore12@0000:6f:01.0-q1,lcore12@0000:74:01.0-q2,lcore12@0000:79:01.0-q3,lcore13@0000:74:01.0-q2,lcore13@0000:79:01.0-q3,lcore13@0000:e7:01.0-q4,lcore14@0000:74:01.0-q2,lcore14@0000:79:01.0-q3,lcore14@0000:e7:01.0-q4,lcore14@0000:ec:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2,lcore15@0000:79:01.0-q3,lcore15@0000:e7:01.0-q4,lcore15@0000:ec:01.0-q5,lcore15@0000:f1:01.0-q6,lcore15@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+13. Rerun step 10-11.
+
+14. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=4 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6a:01.0-q1,lcore13@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q1,lcore14@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2]
+ testpmd>set fwd mac
+ testpmd>start
+
+15. Rerun step 10-11.
+
+16. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queus=3 -a 0000:6f:01.0,max_queus=3 -a 0000:74:01.0,max_queus=3 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:6f:01.0-q1,lcore14@0000:74:01.0-q2,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2]
+ testpmd>set fwd mac
+ testpmd>start
+
+17. Rerun step 10-11.
+
+18. Quit and relaunch vhost with iova=pa by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queus=4 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=pa -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6a:01.0-q1,lcore13@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q1,lcore14@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2]
+ testpmd>set fwd mac
+ testpmd>start
+
+19. Rerun step 10-11.
+
+Test Case 7: PVP packed ring all path vhost enqueue operations with 1:1 mapping between vrings and dsa dpdk driver channels
+----------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with 1 core and
+1 queue when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels
+is 1:1. Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind one dsa device and one nic port to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3@0000:f6:01.0-q0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1,packed_vq=1,vectorized=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1,packed_vq=1,vectorized=1,,queue_size=1025 \
+ -- -i --nb-cores=1 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3@0000:f6:01.0-q3]
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Rerun step 11 with csum fwd.
+
+Test Case 8: PVP packed ring all path mulit-queues vhost async enqueue operation with 1:1 mapping between vrings and dsa dpdk driver channels
+-----------------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 8 dsa devices and one nic port to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore12@0000:f6:01.0-q1,lcore13@0000:f6:01.0-q2,lcore14@0000:f6:01.0-q3,lcore15@0000:f6:01.0-q4,lcore16@0000:f6:01.0-q5,lcore17@0000:f6:01.0-q6,lcore18@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8,vectorized=1,queue_size=1025 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:79:01.0-q3,lcore15@0000:e7:01.0-q4,lcore16@0000:ec:01.0-q5,lcore17@0000:f1:01.0-q6,lcore18@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Rerun step 11 with csum fwd.
+
+14. Quit all testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:79:01.0-q3,lcore15@0000:e7:01.0-q4,lcore16@0000:ec:01.0-q5,lcore17@0000:f1:01.0-q6,lcore18@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+15. Rerun step 3-6 with csum fwd.
+
+Test Case 9: PVP packed ring all path mulit-queues vhost async enqueue operation with M:1 mapping between vrings and dsa dpdk driver channels
+----------------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:1.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 1 dsa device and one nic port to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1 f1:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f1:01.0,max_queues=1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f1:01.0-q0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8,vectorized=1,queue_size=1025 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f1:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f1:01.0-q3]
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Rerun step 7 with csum fwd.
+
+Test Case 10: PVP packed ring all path mulit-queues vhost async enqueue operation with 1:N mapping between vrings and dsa dpdk driver channels
+-----------------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:N.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 8 dsa devices and one nic port to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore11@0000:f6:01.0-q1,lcore11@0000:f6:01.0-q2,lcore11@0000:f6:01.0-q3,lcore11@0000:f6:01.0-q4,lcore11@0000:f6:01.0-q5,lcore11@0000:f6:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes from vhost log::
+
+ testpmd>stop
+
+6. restart vhost port and send imix pkts again, check get same throuhput as above::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1,packed_vq=1,vectorized=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1,packed_vq=1,vectorized=1,queue_size=1025 \
+ -- -i --nb-cores=1 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:79:01.0-q3,lcore15@0000:e7:01.0-q4,lcore16@0000:ec:01.0-q5,lcore17@0000:f1:01.0-q6,lcore18@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Rerun step 11 with csum fwd.
+
+14. Quit all testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:79:01.0-q3,lcore15@0000:e7:01.0-q4,lcore16@0000:ec:01.0-q5,lcore17@0000:f1:01.0-q6,lcore18@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+15. Rerun step 8 with csum fwd.
+
+Test Case 11: PVP packed ring all path mulit-queues vhost async enqueue operation with 1:N mapping between vrings and dsa dpdk driver channels
+-----------------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:N.
+Both iova as VA and PA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 8 dsa devices and one nic port to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore11@0000:f6:01.0-q1,lcore11@0000:f6:01.0-q2,lcore11@0000:f6:01.0-q3,lcore11@0000:f6:01.0-q4,lcore11@0000:f6:01.0-q5,lcore11@0000:f6:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,queues=8,in_order=1,packed_vq=1,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,queues=8,in_order=1,packed_vq=1,vectorized=1,queue_size=1025 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore11@0000:f6:01.0-q1,lcore11@0000:f6:01.0-q2,lcore11@0000:f6:01.0-q3,lcore11@0000:f6:01.0-q4,lcore11@0000:f6:01.0-q5,lcore11@0000:f6:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+13. Rerun step 11.
+
+14. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:79:01.0-q3,lcore15@0000:e7:01.0-q4,lcore16@0000:ec:01.0-q5,lcore17@0000:f1:01.0-q6,lcore18@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+15. Rerun step 11 with csum fwd.
+
+16. Quit all testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:f6:01.0,max_queues=8 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=pa -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@0000:f6:01.0-q0,lcore11@0000:f6:01.0-q1,lcore11@0000:f6:01.0-q2,lcore11@0000:f6:01.0-q3,lcore11@0000:f6:01.0-q4,lcore11@0000:f6:01.0-q5,lcore11@0000:f6:01.0-q6,lcore11@0000:f6:01.0-q7]
+ testpmd>set fwd csum
+ testpmd>start
+
+17. Rerun step 9 with csum fwd.
+
+Test Case 12: PVP packed ring dynamic queues vhost async operation with dsa dpdk driver channels
+---------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring when vhost uses the asynchronous enqueue operations
+with dsa dpdk driver and if the vhost-user can work well when the queue number dynamic change. Both iova as VA and PA mode have beed tested.
+
+1. Bind 8 dsa devices and 1 NIC port to vfio-pci like common step 1-2::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:4f:00.1
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets[64,1518] from packet generator with random ip, check perforamnce can get target.
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 2 queues from vhost log.
+
+6. Quit and relaunch vhost with 1:1 mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3]' \
+ --iova=va -- -i --nb-cores=8 --txd=1024 --rxd=1024 --txq=4 --rxq=4 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q1,lcore13@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3]
+ testpmd>set fwd mac
+ testpmd>start
+
+7. Send imix packets[64,1518] from packet generator with random ip, check perforamnce can get target.
+
+8. Stop vhost port, check vhost RX and TX direction both exist packtes in 4 queues from vhost log.
+
+9. Quit and relaunch vhost with M:N(1:N;M<N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6a:01.0-q7,lcore12@0000:6a:01.0-q1,lcore12@0000:6a:01.0-q2,lcore12@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q2,lcore13@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3,lcore14@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q3,lcore15@0000:6a:01.0-q4,lcore15@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q6,lcore15@0000:6a:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Send imix packets[64,1518] from packet generator with random ip, check perforamnce can get target.
+
+11. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
+
+12. Quit and relaunch vhost with diff M:N(1:N;M<N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:f6:01.0-q7,lcore12@0000:6f:01.0-q1,lcore12@0000:74:01.0-q2,lcore12@0000:79:01.0-q3,lcore13@0000:74:01.0-q2,lcore13@0000:79:01.0-q3,lcore13@0000:e7:01.0-q4,lcore14@0000:74:01.0-q2,lcore14@0000:79:01.0-q3,lcore14@0000:e7:01.0-q4,lcore14@0000:ec:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2,lcore15@0000:79:01.0-q3,lcore15@0000:e7:01.0-q4,lcore15@0000:ec:01.0-q5,lcore15@0000:f1:01.0-q6,lcore15@0000:f6:01.0-q7]
+ testpmd>set fwd mac
+ testpmd>start
+
+13. Rerun step 10-11.
+
+14. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6a:01.0-q1,lcore13@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q1,lcore14@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2]
+ testpmd>set fwd mac
+ testpmd>start
+
+15. Rerun step 10-11.
+
+16. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:6f:01.0-q1,lcore14@0000:74:01.0-q2,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2]
+ testpmd>set fwd mac
+ testpmd>start
+
+17. Rerun step 10-11.
+
+18. Quit and relaunch vhost with iova=pa by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=pa -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6a:01.0-q1,lcore13@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q1,lcore14@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2]
+ testpmd>set fwd mac
+ testpmd>start
+
+19. Rerun step 10-11.
+
+Test Case 13: PVP split ring all path vhost enqueue operations with 1:1 mapping between vrings and dsa kernel driver channels
+------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with 1 core and 1 queue
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind one dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ #ls /dev/dsa,check wq configure, reset if exist
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py --reset 0
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3@wq0.0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1,vectorized=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3@wq0.1]
+ testpmd>set fwd csum
+ testpmd>start
+
+12. Rerun step 3-6 with csum fwd.
+
+Test Case 14: PVP split ring all path multi-queues vhost async enqueue with 1:1 mapping between vrings and dsa kernel driver channels
+--------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 3 dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ #ls /dev/dsa,check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 4
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore12@wq0.1,lcore13@wq0.2,lcore14@wq0.3,lcore15@wq0.4,lcore16@wq0.5,lcore17@wq0.6,lcore18@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq2.0,lcore12@wq2.1,lcore13@wq2.2,lcore14@wq2.3,lcore15@wq4.0,lcore16@wq4.1,lcore17@wq4.2,lcore18@wq4.3]
+ testpmd>set fwd csum
+ testpmd>start
+
+12. Rerun step 10 with csum fwd.
+
+Test Case 15: PVP split ring all path multi-queues vhost async enqueue with M:1 mapping between vrings and dsa kernel driver channels
+--------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:1.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 1 dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.1]
+ testpmd>set fwd csum
+ testpmd>start
+
+12. Rerun step 10 with csum fwd.
+
+Test Case 16: PVP split ring all path multi-queues vhost async enqueue with 1:N mapping between vrings and dsa kernel driver channels
+--------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:N.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 3 dsa device to idxd driver and one nic port to vfio-pci like cmmon step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+ ls /dev/dsa #check wq configure success
+
+2.Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq0.1,lcore11@wq0.2,lcore11@wq0.3,lcore11@wq0.4,lcore11@wq0.5,lcore11@wq0.6,lcore11@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1,vectorized=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq2.0,lcore11@wq2.1,lcore11@wq2.2,lcore11@wq2.3,lcore11@wq4.4,lcore11@wq4.5,lcore11@wq4.6,lcore11@wq4.7]
+ testpmd>set fwd csum
+ testpmd>start
+
+12. Rerun step 3-6 with csum fwd.
+
+Test Case 17: PVP split ring all path multi-queues vhost async enqueue with M:N mapping between vrings and dsa kernel driver channels
+--------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:N.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 8 dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq0.1,lcore11@wq0.2,lcore11@wq0.3,lcore11@wq0.4,lcore11@wq0.5,lcore11@wq0.6,lcore11@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq0.1,lcore11@wq0.2,lcore11@wq0.3,lcore11@wq0.4,lcore11@wq0.5,lcore11@wq0.6,lcore11@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Rerun step 3-6.
+
+13. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq2.1,lcore11@wq4.2,lcore11@wq6.3,lcore11@wq8.4,lcore11@wq10.5,lcore11@wq12.6,lcore11@wq14.7]
+ testpmd>set fwd csum
+ testpmd>start
+
+14. Rerun step 11 with csum fwd.
+
+Test Case 18: PVP split ring dynamic queues vhost async operation with dsa kernel driver channels
+--------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of split ring when vhost uses the asynchronous enqueue operations
+with dsa kernel driver and if the vhost-user can work well when the queue number dynamic change.
+
+1. Bind 8 dsa device to idxd driver and 1 NIC port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets[64,1518] from packet generator with random ip, check perforamnce can get target.
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 2 queues from vhost log.
+
+6. Quit and relaunch vhost with 1:1 mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3]' \
+ --iova=va -- -i --nb-cores=8 --txd=1024 --rxd=1024 --txq=4 --rxq=4 \
+ --lcore-dma=[lcore11@wq0.0,lcore12@wq2.1,lcore13@wq4.2,lcore14@wq6.3]
+ testpmd>set fwd mac
+ testpmd>start
+
+7. Rerun step 3.
+
+8. Stop vhost port, check vhost RX and TX direction both exist packtes in 4 queues from vhost log.
+
+9. Quit and relaunch vhost with M:N(1:N;M<N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq0.7,lcore12@wq0.1,lcore12@wq0.2,lcore12@wq0.3,lcore13@wq0.2,lcore13@wq0.3,lcore13@wq0.4,lcore14@wq0.2,lcore14@wq0.3,lcore14@wq0.4,lcore14@wq0.5,lcore15@wq0.0,lcore15@wq0.1,lcore15@wq0.2,lcore15@wq0.3,lcore15@wq0.4,lcore15@wq0.5,lcore15@wq0.6,lcore15@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Rerun step 3.
+
+11. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
+
+12. Quit and relaunch vhost with diff M:N(1:N;M<N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq14.7,lcore12@wq2.1,lcore12@wq4.2,lcore12@wq6.3,lcore13@wq4.2,lcore13@wq6.3,lcore13@wq8.4,lcore14@wq4.2,lcore14@wq6.3,lcore14@wq8.4,lcore14@wq10.5,lcore15@wq0.0,lcore15@wq2.1,lcore15@wq4.2,lcore15@wq6.3,lcore15@wq8.4,lcore15@wq10.5,lcore15@wq12.6,lcore15@wq14.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+13. Rerun step 10-11.
+
+14. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@wq0.0,lcore12@wq0.0,lcore13@wq0.1,lcore13@wq0.2,lcore14@wq0.1,lcore14@wq0.2,lcore15@wq0.1,lcore15@wq0.2]
+ testpmd>set fwd mac
+ testpmd>start
+
+15. Rerun step 10-11.
+
+16. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@wq0.0,lcore12@wq0.0,lcore13@wq2.1,lcore13@wq4.2,lcore14@wq2.1,lcore14@wq4.2,lcore15@wq2.1,lcore15@wq4.2]
+ testpmd>set fwd mac
+ testpmd>start
+
+17. Rerun step 10-11.
+
+Test Case 19: PVP packed ring all path vhost enqueue operations with 1:1 mapping between vrings and dsa kernel driver channels
+------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with 1 core and 1 queue
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind one dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ #ls /dev/dsa,check wq configure, reset if exist
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py --reset 0
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3@wq0.0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1,packed_vq=1,vectorized=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=1,packed_vq=1,vectorized=1,,queue_size=1025 \
+ -- -i --nb-cores=1 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3@wq0.1]
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Rerun step 3-6 with csum fwd.
+
+Test Case 20: PVP packed ring all path multi-queues vhost async enqueue with 1:1 mapping between vrings and dsa kernel driver channels
+---------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 3 dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ #ls /dev/dsa,check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
+ <dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 4
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore12@wq0.1,lcore13@wq0.2,lcore14@wq0.3,lcore15@wq0.4,lcore16@wq0.5,lcore17@wq0.6,lcore18@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8,packed_vq=1,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8,packed_vq=1,vectorized=1,queue_size=1025 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=8 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq2.0,lcore12@wq2.1,lcore13@wq2.2,lcore14@wq2.3,lcore15@wq4.0,lcore16@wq4.1,lcore17@wq4.2,lcore18@wq4.3]
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Rerun step 11 with csum fwd.
+
+Test Case 21: PVP packed ring all path multi-queues vhost async enqueue with M:1 mapping between vrings and dsa kernel driver channels
+---------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:1.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 1 dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8,packed_vq=1,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,queues=8,packed_vq=1,vectorized=1,queue_size=1025 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.1]
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Rerun step 7 with csum fwd.
+
+Test Case 22: PVP packed ring all path multi-queues vhost async enqueue with 1:N mapping between vrings and dsa kernel driver channels
+---------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:N.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 3 dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq0.1,lcore11@wq0.2,lcore11@wq0.3,lcore11@wq0.4,lcore11@wq0.5,lcore11@wq0.6,lcore11@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1,packed_vq=1,vectorized=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1,packed_vq=1,vectorized=1,queue_size=1025 \
+ -- -i --nb-cores=1 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq2.0,lcore11@wq2.1,lcore11@wq2.2,lcore11@wq2.3,lcore11@wq4.4,lcore11@wq4.5,lcore11@wq4.6,lcore11@wq4.7]
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Rerun step 8 with csum fwd.
+
+Test Case 23: PVP packed ring all path multi-queues vhost async enqueue with M:N mapping between vrings and dsa kernel driver channels
+---------------------------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring in each virtio path with multi-queues
+when vhost uses the asynchronous enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:N.
+Both iova as VA mode, 'mac fwd' and 'csum fwd' have been tested.
+
+1. Bind 8 dsa device to idxd driver and one nic port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq0.1,lcore11@wq0.2,lcore11@wq0.3,lcore11@wq0.4,lcore11@wq0.5,lcore11@wq0.6,lcore11@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+ testpmd>show port stats all
+
+5. Stop vhost port, check that there are packets in both directions of RX and TX in each queue from vhost log::
+
+ testpmd>stop
+
+6. Restart vhost port and send imix packets again, then check the throuhput can get expected data::
+
+ testpmd>start
+ testpmd>show port stats all
+
+7. Relaunch virtio-user with mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Relaunch virtio-user with inorder non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=1,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+9. Relaunch virtio-user with non-mergeable path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,packed_vq=1,queues=8 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Relaunch virtio-user with vector_rx path, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8,packed_vq=1,vectorized=1 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+11. Relaunch virtio-user with vector_rx path and ring size is not power of 2, then repeat step 4-6::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=8,packed_vq=1,vectorized=1,queue_size=1025 \
+ -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1025 --rxd=1025
+ testpmd>set fwd mac
+ testpmd>start
+
+12. Quit all testpmd and relaunch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq0.1,lcore11@wq0.2,lcore11@wq0.3,lcore11@wq0.4,lcore11@wq0.5,lcore11@wq0.6,lcore11@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+13. Rerun step 3-6.
+
+14. Quit all testpmd and relaunch vhost with diff channel by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq2.1,lcore11@wq4.2,lcore11@wq6.3,lcore11@wq8.4,lcore11@wq10.5,lcore11@wq12.6,lcore11@wq14.7]
+ testpmd>set fwd csum
+ testpmd>start
+
+15. Rerun step 3-6 with csum fwd.
+
+Test Case 24: PVP packed ring dynamic queues vhost async operation with dsa kernel driver channels
+---------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test performance of packed ring when vhost uses the asynchronous enqueue
+operations with dsa kernel driver and if the vhost-user can work well when the queue number dynamic change.
+
+1. Bind 8 dsa device to idxd driver and 1 NIC port to vfio-pci like common step 1 and 3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets[64,1518] from packet generator with random ip, check perforamnce can get target.
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 2 queues from vhost log.
+
+6. Quit and relaunch vhost with 1:1 mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3]' \
+ --iova=va -- -i --nb-cores=8 --txd=1024 --rxd=1024 --txq=4 --rxq=4 \
+ --lcore-dma=[lcore11@wq0.0,lcore12@wq2.1,lcore13@wq4.2,lcore14@wq6.3]
+ testpmd>set fwd mac
+ testpmd>start
+
+7. Rerun step 3.
+
+8. Stop vhost port, check vhost RX and TX direction both exist packtes in 4 queues from vhost log.
+
+9. Quit and relaunch vhost with M:N(1:N;M<N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq0.7,lcore12@wq0.1,lcore12@wq0.2,lcore12@wq0.3,lcore13@wq0.2,lcore13@wq0.3,lcore13@wq0.4,lcore14@wq0.2,lcore14@wq0.3,lcore14@wq0.4,lcore14@wq0.5,lcore15@wq0.0,lcore15@wq0.1,lcore15@wq0.2,lcore15@wq0.3,lcore15@wq0.4,lcore15@wq0.5,lcore15@wq0.6,lcore15@wq0.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Rerun step 3.
+
+11. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
+
+12. Quit and relaunch vhost with diff M:N(1:N;M<N) mapping between vrings and dsa virtual channels::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@wq0.0,lcore11@wq14.7,lcore12@wq2.1,lcore12@wq4.2,lcore12@wq6.3,lcore13@wq4.2,lcore13@wq6.3,lcore13@wq8.4,lcore14@wq4.2,lcore14@wq6.3,lcore14@wq8.4,lcore14@wq10.5,lcore15@wq0.0,lcore15@wq2.1,lcore15@wq4.2,lcore15@wq6.3,lcore15@wq8.4,lcore15@wq10.5,lcore15@wq12.6,lcore15@wq14.7]
+ testpmd>set fwd mac
+ testpmd>start
+
+13. rerun step 10-11.
+
+14. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@wq0.0,lcore12@wq0.0,lcore13@wq0.1,lcore13@wq0.2,lcore14@wq0.1,lcore14@wq0.2,lcore15@wq0.1,lcore15@wq0.2]
+ testpmd>set fwd mac
+ testpmd>start
+
+15. Rerun step 10-11.
+
+16. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+ --lcore-dma=[lcore11@wq0.0,lcore12@wq0.0,lcore13@wq2.1,lcore13@wq4.2,lcore14@wq2.1,lcore14@wq4.2,lcore15@wq2.1,lcore15@wq4.2]
+ testpmd>set fwd mac
+ testpmd>start
+
+17. Rerun step 10-11.
+
+Test Case 25: PVP split and packed ring dynamic queues vhost async operation with dsa dpdk and kernel driver channels
+-----------------------------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring and packed ring when vhost uses the asynchronous enqueue
+operations with both dsa dpdk driver and dsa kernel driver and if the vhost-user can work well when the queue number dynamic change.
+Both iova as VA mode have beed tested.
+
+1. Bind 2 dsa device to idxd driver, 2 dsa device and 1 NIC port to vfio-pci like common step 1-3::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+ ls /dev/dsa #check wq configure, reset if exist
+ <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 e7:01.0 ec:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=2,client=1,dmas=[txq0;txq1]' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2 --lcore-dma=[lcore3@wq0.0,lcore3@wq2.0]
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Launch virtio-user with split ring mergeable in-order path by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send imix packets from packet generator with random ip, check perforamnce can get target.
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 2 queues from vhost log.
+
+6. Quit and relaunch vhost as below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0,max_queues=2 -a 0000:ec:01.0,max_queues=4 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=4,client=1,dmas=[txq0;txq1;txq2;txq3]' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=4 --rxq=4 --lcore-dma=[lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q2,lcore3@0000:ec:01.0-q3]
+ testpmd>set fwd mac
+ testpmd>start
+
+7. Send imix packets from packet generator with random ip, check perforamnce can get target.
+
+8. Stop vhost port, check vhost RX and TX direction both exist packtes in 4 queues from vhost log.
+
+9. Quit and relaunch vhost as below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0,max_queues=2 -a 0000:ec:01.0,max_queues=4 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5]' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --lcore-dma=[lcore3@wq0.0,lcore3@wq2.0,lcore3@wq2.2,lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q3]
+ testpmd>set fwd mac
+ testpmd>start
+
+10. Send imix packets from packet generator with random ip, check perforamnce can get target.
+
+11. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
+
+12. Quit and relaunch vhost with diff cahnnels as below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0,max_queues=2 -a 0000:ec:01.0,max_queues=4 \
+ --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --lcore-dma=[lcore3@wq0.0,lcore3@wq0.1,lcore3@wq2.1,lcore3@wq2.0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q3]
+ testpmd>set fwd mac
+ testpmd>start
+
+13. Send imix packets from packet generator with random ip, check perforamnce can get target.
+
+14. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
+
+15. Quit and relaunch virtio-user with packed ring mergeable in-order path by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
+ testpmd>set fwd mac
+ testpmd>start
+
+16. Rerun steps 10-11.
\ No newline at end of file
--
2.25.1
reply other threads:[~2022-05-07 9:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220507095919.311060-1-weix.ling@intel.com \
--to=weix.ling@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).