Add vm2vm_virtio_net_dsa_test_plan.rst into test_plans. Signed-off-by: Wei Ling --- test_plans/vm2vm_virtio_net_dsa_test_plan.rst | 1388 +++++++++++++++++ 1 file changed, 1388 insertions(+) create mode 100644 test_plans/vm2vm_virtio_net_dsa_test_plan.rst diff --git a/test_plans/vm2vm_virtio_net_dsa_test_plan.rst b/test_plans/vm2vm_virtio_net_dsa_test_plan.rst new file mode 100644 index 00000000..9906714b --- /dev/null +++ b/test_plans/vm2vm_virtio_net_dsa_test_plan.rst @@ -0,0 +1,1388 @@ +.. Copyright (c) <2022>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + +====================================================== +VM2VM vhost-user/virtio-net with DSA driver test plan +====================================================== + +Description +=========== + +Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way. +In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA +channels and one DMA channel can be shared by multiple vrings at the same time.Vhost enqueue operation with CBDMA channels is supported +in both split and packed ring. + +This document provides the test plan for testing the following features when Vhost-user using asynchronous data path with +DSA driver (kernel IDXD driver and DPDK vfio-pci driver) in VM2VM virtio-net topology. +1. check Vhost tx offload function by verifing the TSO/cksum in the TCP/IP stack with vm2vm split ring and packed ring +vhost-user/virtio-net mergeable path. +2.Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring +and packed ring vhost-user/virtio-net mergeable and non-mergeable path. +3. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring. + +IOMMU impact: +If iommu off, idxd can work with iova=pa +If iommu on, kernel dsa driver only can work with iova=va by program IOMMU, can't use iova=pa(fwd not work due to pkts payload wrong). + +Note: +1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1, and packed ring multi-queues not support reconnect in qemu yet. +2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version >= 5.2.0, dut to old qemu exist reconnect issue when multi-queues test. +3.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may +exceed IOMMU's max capability, better to use 1G guest hugepage. +4.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd, and the suite has not yet been automated. + +Prerequisites +============= + +Topology +-------- + Test flow: Virtio-net <-> Vhost-user <-> Testpmd <-> Vhost-user <-> Virtio-net + +Software +-------- + iperf + qemu: https://download.qemu.org/qemu-6.2.0.tar.xz + +General set up +-------------- +1. Compile DPDK:: + + # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library= + # ninja -C -j 110 + For example, + CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc + ninja -C x86_64-native-linuxapp-gcc -j 110 + +2. Get the PCI device ID and DSA device ID of DUT, for example, 0000:4f:00.1 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs:: + + # ./usertools/dpdk-devbind.py -s + + Network devices using kernel driver + =================================== + 0000:4f:00.1 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci + + DMA devices using kernel driver + =============================== + 0000:6a:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:6f:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:74:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:79:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:e7:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:ec:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:f1:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:f6:01.0 'Device 0b25' drv=idxd unused=vfio-pci + +Test case +========= + +Common steps +------------ +1. Bind DSA devices to DPDK vfio-pci driver:: + + # ./usertools/dpdk-devbind.py -b vfio-pci + + For example, bind 2 DMA devices to vfio-pci driver: + # ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0 + +.. note:: + + One DPDK DSA device can create 8 WQ at most. Below is an example, where DPDK DSA device will create one and + eight WQ for DSA deivce 0000:e7:01.0 and 0000:ec:01.0. The value of “max_queues” is 1~8: + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:e7:01.0,max_queues=1 -- -i + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:ec:01.0,max_queues=8 -- -i + +2. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ):: + + # ./usertools/dpdk-devbind.py -b idxd + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q + +.. note:: + + Better to reset WQ when need operate DSA devices that bound to idxd drvier: + # ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset + You can check it by 'ls /dev/dsa' + numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0 + numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8 + + For example, bind 2 DMA devices to idxd driver and configure WQ: + + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2 + Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq2.0 wq2.1 wq2.2 wq2.3" + +Test Case 1: VM2VM vhost-user/virtio-net split ring test TSO with dsa dpdk driver +----------------------------------------------------------------------------------- +This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path +by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver. + +1. Bind 1 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 + +2. Launch the Vhost testpmd by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:e7:01.0,max_queues=2 \ + --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \ + --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1] + testpmd>start + +3. Launch VM1 and VM2 with split ring mergeable path and tso on:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522:: + + testpmd>show port xstats all + +Test Case 2: VM2VM vhost-user/virtio-net split ring mergeable path 8 queues test with large packet payload with dsa dpdk driver +--------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net split ring mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk driver. +The dynamic change of multi-queues number, iova as VA and PA mode also test. + +1. Bind 4 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 f6:01.1 + +2. Launch the Vhost testpmd by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:e7:01.0,max_queues=8 -a 0000:ec:01.0,max_queues=8 \ + --vdev 'net_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1,lcore2@0000:e7:01.0-q2,lcore2@0000:e7:01.0-q3,lcore2@0000:e7:01.0-q4,lcore2@0000:e7:01.0-q5,lcore3@0000:e7:01.0-q6,lcore3@0000:e7:01.0-q7,lcore4@0000:ec:01.0-q0,lcore4@0000:ec:01.0-q1,lcore4@0000:ec:01.0-q2,lcore4@0000:ec:01.0-q3,lcore4@0000:ec:01.0-q4,lcore4@0000:ec:01.0-q5,lcore4@0000:ec:01.0-q6,lcore5@0000:ec:01.0-q7] + testpmd>start + +3. Launch VM1 and VM2 using qemu 6.2.0:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Quit and relaunch vhost w/ diff dsa channels:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=8 -a 0000:f6:01.0,max_queues=8 \ + --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore2@0000:f1:01.0-q2,lcore2@0000:f1:01.0-q3,lcore3@0000:f1:01.0-q0,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q4,lcore3@0000:f1:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f1:01.0-q7,lcore4@0000:f1:01.0-q1,lcore4@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore4@0000:f6:01.0-q2,lcore4@0000:f6:01.0-q3,lcore4@0000:f6:01.0-q4,lcore4@0000:f6:01.0-q5,lcore4@0000:f6:01.0-q6,lcore5@0000:f6:01.0-q7] + testpmd>start + +9. Rerun step 6-7. + +10. Quit and relaunch vhost w/ iova=pa:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:e7:01.0,max_queues=8 -a 0000:ec:01.0,max_queues=8 \ + --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1,lcore2@0000:e7:01.0-q2,lcore2@0000:e7:01.0-q3,lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q2,lcore3@0000:e7:01.0-q4,lcore3@0000:e7:01.0-q5,lcore3@0000:e7:01.0-q6,lcore3@0000:e7:01.0-q7,lcore4@0000:e7:01.0-q1,lcore4@0000:e7:01.0-q3,lcore4@0000:ec:01.0-q0,lcore4@0000:ec:01.0-q1,lcore4@0000:ec:01.0-q2,lcore4@0000:ec:01.0-q3,lcore4@0000:ec:01.0-q4,lcore4@0000:ec:01.0-q5,lcore4@0000:ec:01.0-q6,lcore5@0000:ec:01.0-q7] + testpmd>start + +11. Rerun step 6-7. + +12. Quit vhost ports and relaunch vhost ports w/o dsa channels:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 + testpmd>start + +13. On VM1, set virtio device:: + + # ethtool -L ens5 combined 4 + +14. On VM2, set virtio device:: + + # ethtool -L ens5 combined 4 + +15. Rerun step 6-7. + +16. Quit vhost ports and relaunch vhost ports with 1 queues:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1 + testpmd>start + +17. On VM1, set virtio device:: + + # ethtool -L ens5 combined 1 + +18. On VM2, set virtio device:: + + # ethtool -L ens5 combined 1 + +19. Rerun step 6-7. + +Test Case 3: VM2VM vhost-user/virtio-net split ring non-mergeable path 8 queues test with large packet payload with dsa dpdk driver +------------------------------------------------------------------------------------------------------------------------------------ +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk driver. +The dynamic change of multi-queues number also test. + +1. Bind 2 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:e7:01.0,max_queues=8 -a 0000:ec:01.0,max_queues=8 \ + --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1,lcore2@0000:e7:01.0-q2,lcore2@0000:e7:01.0-q3,lcore2@0000:e7:01.0-q4,lcore2@0000:e7:01.0-q5,lcore3@0000:e7:01.0-q6,lcore3@0000:e7:01.0-q7,lcore4@0000:ec:01.0-q0,lcore4@0000:ec:01.0-q1,lcore4@0000:ec:01.0-q2,lcore4@0000:ec:01.0-q3,lcore4@0000:ec:01.0-q4,lcore4@0000:ec:01.0-q5,lcore4@0000:ec:01.0-q6,lcore5@0000:ec:01.0-q7] + testpmd>start + +3. Launch VM1 and VM2:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Quit vhost ports and relaunch vhost ports w/o dsa channels:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 + testpmd>start + +9. Rerun step 6-7. + +10. Quit vhost ports and relaunch vhost ports with 1 queues:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1 + testpmd>start + +11. On VM1, set virtio device:: + + # ethtool -L ens5 combined 1 + +12. On VM2, set virtio device:: + + # ethtool -L ens5 combined 1 + +13. Rerun step 6-7. + +Test Case 4: VM2VM vhost-user/virtio-net packed ring test TSO with dsa dpdk driver +----------------------------------------------------------------------------------- +This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path +by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver. + +1. Bind 2 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost -a 0000:e7:01.0,max_queues=1 -a 0000:ec:01.0,max_queues=1 \ + --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \ + --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@0000:e7:01.0-q0,lcore4@0000:ec:01.0-q0] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522:: + + testpmd>show port xstats all + +Test Case 5: VM2VM vhost-user/virtio-net packed ring mergeable path 8 queues test with large packet payload with dsa dpdk driver +--------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk driver. +The dynamic change of multi-queues number also test. + +1. Bind 8 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \ + --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \ + --lcore-dma=[lcore2@0000:6a:01.0-q0,lcore2@0000:6f:01.0-q1,lcore2@0000:74:01.0-q2,lcore2@0000:79:01.0-q3,lcore3@0000:6a:01.0-q0,lcore3@0000:74:01.0-q2,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:6f:01.0-q1,lcore4@0000:79:01.0-q3,lcore4@0000:6a:01.0-q1,lcore4@0000:6f:01.0-q2,lcore4@0000:74:01.0-q3,lcore4@0000:79:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q6,lcore4@0000:f1:01.0-q7,lcore5@0000:f6:01.0-q0] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + : scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Rerun step 6-7 five times. + +Test Case 6: VM2VM vhost-user/virtio-net packed ring non-mergeable path 8 queues test with large packet payload with dsa dpdk driver +------------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net packed ring non-mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk driver. +The dynamic change of multi-queues number also test. + +1. Bind 8 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \ + --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:6a:01.0-q0,lcore2@0000:6f:01.0-q1,lcore2@0000:74:01.0-q2,lcore2@0000:79:01.0-q3,lcore2@0000:e7:01.0-q4,lcore2@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:6a:01.0-q1,lcore4@0000:6f:01.0-q2,lcore4@0000:74:01.0-q3,lcore4@0000:79:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q6,lcore4@0000:f1:01.0-q7,lcore5@0000:f6:01.0-q0] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Rerun step 6-7 five times. + +Test Case 7: VM2VM vhost-user/virtio-net packed ring test TSO with dsa dpdk driver and pa mode +----------------------------------------------------------------------------------------------- +This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path +by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver and iova as PA mode. + +1. Bind 2 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 + +2. Launch the Vhost sample with PA mode by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost -a 0000:e7:01.0 -a 0000:ec:01.0 \ + --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \ + --iova=pa -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@0000:e7:01.0-q0,lcore4@0000:ec:01.0-q0] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522:: + + testpmd>show port xstats all + +Test Case 8: VM2VM vhost-user/virtio-net packed ring mergeable path 8 queues test with large packet payload with dsa dpdk driver and pa mode +--------------------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk driver +and iova as PA mode. The dynamic change of multi-queues number also test. + +1. Bind 8 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \ + --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:6a:01.0-q0,lcore2@0000:6f:01.0-q1,lcore2@0000:74:01.0-q2,lcore2@0000:79:01.0-q3,lcore3@0000:6a:01.0-q0,lcore3@0000:74:01.0-q2,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:6f:01.0-q1,lcore4@0000:79:01.0-q3,lcore4@0000:6a:01.0-q1,lcore4@0000:6f:01.0-q2,lcore4@0000:74:01.0-q3,lcore4@0000:79:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q6,lcore4@0000:f1:01.0-q7,lcore5@0000:f6:01.0-q0] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Rerun step 6-7 five times. + +Test Case 9: VM2VM vhost-user/virtio-net split ring test TSO with dsa kernel driver +------------------------------------------------------------------------------------ +This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path +by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. Bind 1 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0 + ls /dev/dsa #check wq configure success + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \ + --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \ + --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3] + testpmd>start + +3. Launch VM1 and VM2 on socket 1:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522:: + + testpmd>show port xstats all + +Test Case 10: VM2VM vhost-user/virtio-net split ring mergeable path 8 queues test with large packet payload with dsa kernel driver +----------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net split ring mergeable path when vhost uses the asynchronous enqueue operations with dsa kernel driver. +The dynamic change of multi-queues number also test. + +1. Bind 2 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + ls /dev/dsa #check wq configure success + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \ + --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \ + --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq0.2,lcore2@wq0.3,lcore2@wq0.4,lcore2@wq0.5,lcore3@wq0.6,lcore3@wq0.7,lcore4@wq2.0,lcore4@wq2.1,lcore4@wq2.2,lcore4@wq2.3,lcore4@wq2.4,lcore4@wq2.5,lcore4@wq2.6,lcore5@wq2.7] + testpmd>start + +3. Launch VM1 and VM2 using qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Quit and relaunch vhost w/ diff dsa channels:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \ + --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq0.2,lcore2@wq0.3,lcore3@wq0.0,lcore3@wq0.2,lcore3@wq0.4,lcore3@wq0.5,lcore3@wq0.6,lcore3@wq0.7,lcore4@wq0.1,lcore4@wq0.3,lcore4@wq2.0,lcore4@wq2.1,lcore4@wq2.2,lcore4@wq2.3,lcore4@wq2.4,lcore4@wq2.5,lcore4@wq2.6,lcore5@wq2.7] + testpmd>start + +9. Rerun step 6-7. + +10. Quit vhost ports and relaunch vhost ports w/o dsa channels:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 + testpmd>start + +11. On VM1, set virtio device:: + + ethtool -L ens5 combined 4 + +12. On VM2, set virtio device:: + + ethtool -L ens5 combined 4 + +13. Rerun step 6-7. + +14. Quit vhost ports and relaunch vhost ports with 1 queues:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1 + testpmd>start + +15. On VM1, set virtio device:: + + ethtool -L ens5 combined 1 + +16. On VM2, set virtio device:: + + ethtool -L ens5 combined 1 + +17. Rerun step 6-7. + +Test Case 11: VM2VM vhost-user/virtio-net split ring non-mergeable path 8 queues test with large packet payload with dsa kernel driver +--------------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous enqueue operations with dsa kernel driver. +The dynamic change of multi-queues number also test. + +1. Bind 2 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + ls /dev/dsa #check wq configure success + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \ + --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq0.2,lcore2@wq0.3,lcore2@wq0.4,lcore2@wq0.5,lcore3@wq0.6,lcore3@wq0.7,lcore4@wq2.0,lcore4@wq2.1,lcore4@wq2.2,lcore4@wq2.3,lcore4@wq2.4,lcore4@wq2.5,lcore4@wq2.6,lcore5@wq2.7] + testpmd>start + +3. Launch VM1 and VM2:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Quit vhost ports and relaunch vhost ports w/o dsa channels:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 + testpmd>start + +9. Rerun step 6-7. + +10. Quit vhost ports and relaunch vhost ports with 1 queues:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1 + testpmd>start + +11. On VM1, set virtio device:: + + # ethtool -L ens5 combined 1 + +12. On VM2, set virtio device:: + + # ethtool -L ens5 combined 1 + +13. Rerun step 6-7. + +Test Case 12: VM2VM vhost-user/virtio-net packed ring test TSO with dsa kernel driver +------------------------------------------------------------------------------------- +This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path +by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. Bind 2 dsa device to idxd:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 2 + ls /dev/dsa #check wq configure success + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \ + --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \ + --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@wq0.0,lcore4@wq2.0] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522:: + + testpmd>show port xstats all + +Test Case 13: VM2VM vhost-user/virtio-net packed ring mergeable path 8 queues test with large packet payload with dsa kernel driver +------------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue operations with dsa kernel driver. +The dynamic change of multi-queues number also test. + +1. Bind 8 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14 + ls /dev/dsa #check wq configure success + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \ + --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2,lcore2@wq6.3,lcore3@wq0.0,lcore3@wq4.2,lcore3@wq8.4,lcore3@wq10.5,lcore3@wq12.6,lcore3@wq14.7,lcore4@wq2.1,lcore4@wq6.3,lcore4@wq0.1,lcore4@wq2.2,lcore4@wq4.3,lcore4@wq6.4,lcore4@wq8.5,lcore4@wq10.6,lcore4@wq12.7,lcore5@wq14.0] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Rerun step 6-7 five times. + +Test Case 14: VM2VM vhost-user/virtio-net packed ring non-mergeable path 8 queues test with large packet payload with dsa kernel driver +---------------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue operations with dsa kernel driver. +The dynamic change of multi-queues number also test. + +1. Bind 8 dsa device to vfio-pci like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14 + ls /dev/dsa #check wq configure success + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \ + --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2,lcore2@wq6.3,lcore3@wq0.0,lcore3@wq4.2,lcore3@wq8.4,lcore3@wq10.5,lcore3@wq12.6,lcore3@wq14.7,lcore4@wq2.1,lcore4@wq6.3,lcore4@wq0.1,lcore4@wq2.2,lcore4@wq4.3,lcore4@wq6.4,lcore4@wq8.5,lcore4@wq10.6,lcore4@wq12.7,lcore5@wq14.0] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 8 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Rerun step 6-7 five times. + +Test Case 15: VM2VM vhost-user/virtio-net split ring non-mergeable 16 queues test with large packet payload with dsa dpdk and kernel driver +-------------------------------------------------------------------------------------------------------------------------------------------- +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk +and kernel driver. The dynamic change of multi-queues number also test. + +1. Bind 4 dsa device to vfio-pci and 4 dsa device to idxd like common step 1-2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6 + ls /dev/dsa #check wq configure success + + # ./usertools/dpdk-devbind.py -u 0000:e7:01.0 0000:ec:01.0 0000:f1:01.0 0000:f6:01.0 + # ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0 0000:f1:01.0 0000:f6:01.0 + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:e7:01.0 -a 0000:ec:01.0 \ + --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1,lcore2@0000:ec:01.0-q0,lcore2@0000:ec:01.0-q1,lcore3@wq0.0,lcore3@wq2.0,lcore4@0000:e7:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q4,lcore4@0000:ec:01.0-q5,lcore5@wq4.1,lcore5@wq2.1] + testpmd>start + +3. Launch VM1 and VM2:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1,server \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 16 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 16 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Quit vhost ports and relaunch vhost ports w/ diff dsa channels:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:e7:01.0,max_queues=2 -a 0000:f1:01.0,max_queues=2 -a 0000:f6:01.0,max_queues=2 \ + --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13]' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore2@wq4.2,lcore3@wq6.1,lcore3@wq6.3,lcore4@0000:e7:01.0-q1,lcore4@0000:f6:01.0-q0,lcore4@wq4.2,lcore4@wq6.0,lcore5@wq4.2,lcore5@wq6.0] + testpmd>start + +9. rerun step 6-7. + +10. Quit vhost ports and relaunch vhost ports w/o dsa channels:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 + testpmd>start + +11. Rerun step 6-7. + +12. Quit vhost ports and relaunch vhost ports with 1 queues:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \ + --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1 + testpmd>start + +13. On VM1, set virtio device:: + + # ethtool -L ens5 combined 1 + +14. On VM2, set virtio device:: + + # ethtool -L ens5 combined 1 + +15. Rerun step 6-7. + +Test Case 16: VM2VM vhost-user/virtio-net packed ring mergeable 16 queues test with large packet payload with dsa dpdk and kernel driver +------------------------------------------------------------------------------------------------------------------------------------------ +This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in +vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk +and kernel driver. The dynamic change of multi-queues number also test. + +1. Bind 4 dsa device to vfio-pci and 4 dsa device to idxd like common step 1-2:: + + ls /dev/dsa #check wq configure, reset if exist + + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 6 + ls /dev/dsa #check wq configure success + +2. Launch the Vhost sample by below commands:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \ + --vdev 'net_vhost0,iface=vhost-net0,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \ + --vdev 'net_vhost1,iface=vhost-net1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \ + --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq2.0,lcore2@wq2.1,lcore3@wq0.1,lcore3@wq2.0,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:e7:01.0-q4,lcore4@0000:ec:01.0-q5,lcore4@0000:f1:01.0-q1,lcore4@wq2.0,lcore5@wq4.1,lcore5@wq2.0,lcore5@wq4.1,lcore5@wq6.2] + testpmd>start + +3. Launch VM1 and VM2 with qemu:: + + # taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \ + -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10 + + # taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net1 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12 + +4. On VM1, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 16 + # ifconfig ens5 1.1.1.2 + # arp -s 1.1.1.8 52:54:00:00:00:02 + +5. On VM2, set virtio device IP and run arp protocal:: + + # ethtool -L ens5 combined 16 + # ifconfig ens5 1.1.1.8 + # arp -s 1.1.1.2 52:54:00:00:00:01 + +6. Scp 1MB file form VM1 to VM2:: + + # scp root@1.1.1.8:/ + +7. Check the iperf performance between two VMs by below commands:: + + # iperf -s -i 1 + # iperf -c 1.1.1.2 -i 1 -t 60 + +8. Rerun step 6-7 five times. + + + -- 2.25.1